Copper-catalyzed cyanation of benzyl chlorides with non-toxic K4[Fe(CN)6]

Copper-based catalysts were firstly introduced into the cyanation of benzyl chlorides with non-toxic K₄[Fe(CN)₆]. The presented method avoids the use of extremely poisonous alkali cyanides and precious palladium catalysts. No other reagent apart from CuI, K₄[Fe(CN)₆] and toluene was used in the cyanation, showing that the presented protocol is simple and practical. A series of benzyl chlorides were smoothly cyanated in up to 85% yield under the optimal conditions.     

An expedient Pd/DBU mediated cyanation of aryl/heteroaryl bromides with K4[Fe(CN)6

A practical Pd(PPh(3))(4)/DBU catalytic system for the synthesis of pharmaceutically relevant aminopyridine nitrile intermediates, as well as a variety of other aryl nitriles using non-toxic K(4)[Fe(CN)(6)] has been developed. The key features of our new protocol for cyanation lie in that the reaction can be carried out with readily available Pd(PPh(3))(4) under mild and green conditions, even without the assistance of other ligands.     

A facile microwave-assisted palladium-catalyzed cyanation of aryl chlorides

We report an efficient method for the preparation of aryl nitriles from aryl chlorides under either microwave assisted or thermal conditions. A catalyst system comprising tris(dibenzylidene acetone)dipalladium (Pd₂(dba)₃) and 2-(2′,6′-dimethoxybiphenyl)dicyclohexylphosphine (S-Phos) is shown to effectively promote cyanation of various aryl chlorides with Zn(CN)₂ as the cyanide source.     

Ag/Cu-mediated decarboxylative cyanation of aryl carboxylic acids with K4Fe(CN)6 under aerobic conditions

A method for facile synthesis of aryl nitriles has been well established via Ag/Cu-mediated decarboxylative cyanation of benzoic acids with K₄Fe(CN)₆ under aerobic conditions. The approach of using readily accessible aryl carboxylic acids and green K₄Fe(CN)₆ as starting material provides a feasible alternative to previous cyanation protocols. Control experiments revealed the key role of Cu for the process and excluded the possibility of a radical mechanism for the transformation.     

A new palladium catalyst system for the cyanation of aryl chlorides with K4[Fe(CN)6]

The development of a novel Pd-catalyzed synthesis of (hetero)aromatic nitriles from the corresponding aryl chlorides and potassium hexacyanoferrate(II) is described. This novel protocol avoids the use of highly toxic alkali cyanides and proceeds in the presence of small amounts of palladium catalysts. High yields and selectivities of the corresponding aryl nitriles were achieved applying di(1-adamantyl)-1-butylphosphine (cataCXium^® A) as the ligand.     

Progress in the palladium-catalyzed cyanation of aryl chlorides

The development of new palladium catalysts for the cyanation of various aryl and heteroaryl chlorides is described. The combination of amine co-catalysts with chelating phosphine ligands, for example, 1,4-bis(diphenylphosphino)butane (dppb) or 1,5-bis(diphenylphosphino)pentane (dpppe), allows an efficient cyanation of chloroarenes with simple potassium cyanide. General palladium-catalyzed cyanation of nonactivated and deactivated chloroarenes is possible for the first time. Studies of the oxidative addition of aryl halides to palladium triphenylphosphine complexes in the presence and absence of amines suggest that the co-catalyst is capable of preventing catalyst deactivation caused by the presence of excess cyanide ions in solution.     

Preparation of57Fe enriched K4[Fe(CN)6] and K3[Fe(CN)6]

A simple method to prepare⁵⁷Fe enriched K₄[Fe(CN)₆] and K₃[Fe(CN)₆] is described. The yields of the products are much better than those reported in the literature so far. The enrichment is essential for⁵⁷Fe Mössbauer investigation in a variety of Prussiate type complexes and other inorganic compounds which are conveniently prepared from K₄[Fe(CN)₆] and K₃[Fe(CN)₆]. K₄[Fe(CN)₆] was obtained by reacting freshly prepared Fe(OH)₃ with glacial acetic acid and treating with iron acetate in boiling aqueous solution of KCN. The novel feature of the procedure to obtain K₃[Fe(CN)₆] is that the oxidation of K₄[Fe(CN)₆] has been carried out in the solid state by passing chlorine gas over the powdered specimen. K₃[Fe(CN)₆] was crystallised from alkaline solution of this oxidised powder. The compounds were characterised by Mössbauer spectroscopy.     

Palladium-catalyzed three-component arylcyanation of internal alkynes with aryl bromides and K4[Fe(CN)6

The one-pot, palladium-catalyzed, three-component coupling of aryl bromides, internal alkynes, and environmentally friendly K4[Fe(CN)6] provides an efficient and direct method for the preparation of beta-arylalkenylnitriles.     

Pd-catalyzed cyanation of benzyl chlorides with nontoxic K4[Fe(CN)6]

Non-toxic K₄[Fe(CN)₆] was demonstrated to be effective as a green cyanating agent for the cyanation of alkyl halides using PPh₃/Pd(OAc)₂ as a catalyst system. The presented method allowed a series of benzyl chlorides to be smoothly cyanated in up to 88% yield. In order to avoid or suppress the deactivation of the catalyst, the reaction was required to be performed in a stringent inert ambiance.     

K4[Fe(CN)6]-K3[Fe(CN)6]体系催化分光光度法测定痕量汞

建立了一种测定痕量汞的催化分光光度新方法,它是基于汞能催化亚铁氰化钾分解生成Fe2 ,生成的Fe2 又与铁氰化钾反应生成兰色胶体溶液.方法的相对标准偏差≤5.3%,回收率为98.8%～104.8%之间,检出限为9.8×10-7 g/L;线性范围为0～0.050 μg/mL.     

Fe L-edge XAS studies of K4[Fe(CN)6] and K3[Fe(CN)6]: a direct probe of back-bonding

Distinct spectral features at the Fe L-edge of the two compounds K3[Fe(CN)6] and K4[Fe(CN)6] have been identified and characterized as arising from contributions of the ligand pi orbitals due to metal-to-ligand back-bonding. In addition, the L-edge energy shifts and total intensities allow changes in the ligand field and effective nuclear charge to be determined. It is found that the ligand field term dominates the edge energy shift. The results of the experimental analysis were compared to BP86 DFT calculations. The overall agreement between the calculations and experiment is good; however, a larger difference in the amount of pi back-donation between Fe(II) and Fe(III) is found experimentally. The analysis of L-edge spectral shape, energy shift, and total intensity demonstrates that Fe L-edge X-ray absorption spectroscopy provides a direct probe of metal-to-ligand back-bonding.     

Hydroxyapatite-supported Cu(I)-catalysed cyanation of styrenyl bromides with K4[Fe(CN)6]: an easy access to cinnamonitriles

An efficient cyanation of styrenyl bromides by K(4)[Fe(CN)(6)] has been achieved under the catalysis of hydroxyapatite-supported copper(I) producing a variety of functionalized cinnamonitriles in high yields. The stereochemistry of the styrenyl double bond is preserved during the process providing the same stereoisomer of product.     

掠射椭偏术对K_4〔Fe(CN)_6〕/K_3〔Fe(CN)_6〕电极反应的研究

提出掠射椭圆偏振测试技术的实验方案,应用该掠射式技术结合循环伏安法研究了在镀有Ｉｎ２Ｏ３玻璃片上进行的Ｋ４〔Ｆｅ（ＣＮ）６〕／Ｋ３〔Ｆｅ（ＣＮ）６〕电极反应．结果证明：掠射椭圆偏振术可在电化学反应过程中现场测定椭圆偏振参数及其变化规律,这些规律与所发生的表面电化学反应规律相对应,由此可以对电极体系进行研究;现场掠射椭圆偏振术还能用于分析表面扩散层的性质,弥补其它界面研究方法的缺陷．     

Mild and general methods for the palladium-catalyzed cyanation of aryl and heteroaryl chlorides

[reaction: see text] New methods for the palladium-catalyzed cyanation of aryl and heteroaryl chlorides have been developed, featuring sterically demanding, electron-rich phosphines. Highly challenging electron-rich aryl chlorides, in addition to electron-neutral and electron-deficient substrates, as well as nitrogen- and sulfur-containing heteroaryl chlorides can all undergo efficient cyanation under relatively mild conditions using readily available materials. In terms of substrate scope and temperature, these methods compare very favorably with the state-of-the-art cyanations of aryl chlorides.     

Microwave-enhanced and ligand-free copper-catalyzed cyanation of aryl halides with K4[Fe(CN)6] in water

Copper-catalyzed cyanation of aryl halides was improved to be more economical and environmentally friendly by using water as the solvent and ligand-free Cu(OAc)₂·H₂O as the catalyst under microwave heating. The suggested methodology was applicable to a wide range of substrates including aryl iodides and activated aryl bromides.     

Microwave-enhanced synthesis of aryl nitriles using dimeric orthopalladated complex of tribenzylamine and K4[Fe(CN)6]

The activity of palladacycle [Pd{C₆H₄(CH₂N(CH₂Ph)₂)} (μ-Br)]₂ complex was investigated in the synthesis of benzonitriles under both conventional and microwave irradiation conditions and their results were compared together. This complex is an efficient, stable, and non-sensitive to air and moisture catalyst for the cyanation reaction. The substituted benzonitriles were produced of various aryl halides in excellent yields and short reaction times using a catalytic amount of [Pd{C₆H₄(CH₂N(CH₂Ph)₂)} (μ-Br)]₂ complex and K₄[Fe(CN)₆] in DMF at 130 °C. In comparison to conventional heating conditions, the reactions under microwave irradiation gave higher yields in shorter reaction times.     

An efficient palladium-catalyzed Heck coupling of aryl chlorides with alkenes

Catalyst system PdCl₂(PCy₃)₂/Cs₂CO₃ in dioxane was found to be the efficient catalyst system for Heck cross-coupling reactions of deactivated, neutral, and activated aryl chlorides with a variety of alkenes under mild conditions to afford selectively E-arylated alkenes in good to excellent yields.     

无配体铜催化芳溴和K_4[Fe(CN)_6]的氰化

铜催化芳溴氰化反应通常在惰性气体保护下进行, 而且配体和碱的使用也是必要的. 本文发现无配体的Cu(OAc)_2·H_2O能够有效地催化芳溴的氰化;并且反应无需使用碱, 无需惰性气体保护;为芳腈的合成提供一种经济有效的方法. 此方法可应用到多种芳溴的腈化, 在16种芳溴底物反应的例子中, 得到了56%-94%的产率.     

Palladium‐catalyzed cyanation reaction of aryl halides using K4[Fe(CN)6] as non‐toxic source of cyanide under microwave irradiation

An efficient method for preparation of aryl nitriles—using [Pd{C₆H₂(CH₂CH₂ NH₂)‐(OMe)₂,3,4} (µ‐Br)]₂ complex as an efficient catalyst and K₄[Fe(CN)₆] as a green cyanide source—from aryl bromides, aryl iodides and aryl chlorides under microwave irradiation has been reported. This complex has been demonstrated to be an active and efficient catalyst for this reaction. Using a catalytic amount of this synthesized palladium complex in DMF at 130 °C led to production of the cyanoarenes in excellent yields in short reaction times. Copyright © 2010 John Wiley & Sons, Ltd.