Surface tension of ionic liquids and ionic liquid solutions

Some of the most active scientific research fronts of the past decade are centered on ionic liquids. These fluids present characteristic surface behavior and distinctive trends of their surface tension versus temperature. One way to explore and understand their unique nature is to study their surface properties. This critical review analyses most of the surface tension data reported between 2001 and 2010 (187 references).     

Electrochemical synthesis and the functionalization of few layer graphene in ionic liquid and redox ionic liquid

Electrochemical reductive exfoliation of graphite to few layered graphene(FLG) in presence of 1-ethyl-2,3-dimethyl imidazolium bis(trifluoromethylsulfonyl) imide ionic liquid and redox ionic liquid based ferrocene has been investigated. Thus, by applying a mild negative potential(-2.7 V vs. Fc/Fc~+) to carbon electrode in ionic liquid graphene flakes could be generated. The generated materials have been characterized by X-ray photoelectron spectroscopy, Raman spectroscopy, high resolution transmission electron microscopy and atomic force microscopy. XPS and Raman analysis show that the electrochemical reductive exfoliation provides the formation of FLG. The thickness of the resulting FLG was found to be ranged between 4 and1 nm. HR-TEM images reveal the formation of few graphene layers and in some cases single graphene layer was observed.Moreover, this electrochemical route conduces to the formation of ionic liquid functionalized FLG. Finally, the reductive exfoliation was further investigated in the presence of redox ionic liquid. XPS and electrochemical measurements confirm the presence of ferrocene.     

Impact of imidazolium-based ionic liquid surfactant additions on dilational rheology properties of different protein adsorption layer

The interfacial behavior of β-casein and BSA solutions have been investigated in the presence of imidazolium-based ionic liquid surfactant ([C₁₄mim]Br) at the decane/water interface with the oscillating the drop and interfacial tension relaxation measurements. Both the electrostatic and the hydrophobic interaction between protein and [C₁₄mim]Br played crucial roles as [C₁₄mim]Br concentration increases. Furthermore, it was found that the dilational rheology parameters provided information of the adsorbed layers structure, and the dynamics properties of the adsorbed layers depend on the bulk [C₁₄mim]Br concentration. Moreover, with the concentration of [C₁₄mim]Br increasing, β-casein in the interfacial layer was subject to conformational changes where it gave space to [C₁₄mim]Br molecules in the form of co-adsorb; for BSA/[C₁₄mim]Br solutions, the globule protein BSA deformed and then co-adsorb with [C₁₄mim]Br molecules at the decane/water interface. These results will contribute to elucidation of the influence of the surfactant on the different structure proteins and the wide applications of protein/surfactant systems in practice.     

Streptococcus mutans and Streptococcus intermedius adhesion to fibronectin films are oppositely influenced by ionic strength

Bacterial adhesion to protein-coated surfaces is mediated by an interplay of specific and nonspecific interactions. Although nonspecific interactions are ubiquitously present, little is known about the physicochemical mechanisms of specific interactions. The aim of this paper is to determine the influence of ionic strength on the adhesion of two streptococcal strains to fibronectin films. Streptococcus mutans LT11 and Streptococcus intermedius NCTC11324 both possess antigen I/II with the ability to bind fibronectin from solution, but S. intermedius binds approximately 20x less fibronectin than does the S. mutans strain under identical conditions. Both strains as well as fibronectin films are negatively charged in low ionic strength phosphate buffered saline (PBS, 10x diluted), but bacteria appear uncharged in high ionic strength PBS. Physicochemical modeling on the basis of overall cell surface properties (cell surface hydrophobicity and zeta potentials) demonstrates that both strains should favor adhesion to fibronectin films in a high ionic strength environment as compared to in a low ionic strength environment, where electrostatic repulsion between equally charged surfaces is dominant. Adhesion of S. intermedius to fibronectin films in a parallel plate flow chamber was completely in line with this modeling, while in addition atomic force microscopy (AFM) indicated stronger adhesion forces upon retraction between fibronectin-coated tips and the cell surfaces in high ionic strength PBS than in low ionic strength PBS. Thus, the dependence of the interaction on ionic strength is dominated by the overall negative charge on the interacting surfaces. Adhesion of S. mutans to fibronectin films, however, was completely at odds with theoretical modeling, and the strain adhered best in low ionic strength PBS. Moreover, AFM indicated weaker repulsive forces upon approach between fibronectin-coated tips and the cell surfaces in low ionic strength PBS than in high ionic strength PBS. This indicated that the dependence of the interaction on ionic strength is dominated by electrostatic attraction between oppositely charged, localized domains on the interacting surfaces, despite their overall negative charge. In summary, this study shows that physicochemical modeling of bacterial adhesion to protein-coated surfaces is only valid provided the number of specific interaction sites on the cell surfaces is low, such as on S. intermedius NCTC11324. Nonspecific interactions are dominated by specific interactions if the number of specific interaction sites is large, such as on S. mutans LT11. Its ionic strength dependence indicates that the specific interaction is electrostatic in nature and operative between oppositely charged domains on the interacting surfaces, despite the generally overall negatively charged character of the surfaces.     

Dielectric properties of a liquid of dipole hard spheres

The Kirkwood factor g _K of a model polar liquid of dipolar hard spheres (DHSs) was approximated by analytical equations using the approximation of the interaction of the second neighbors within the hindered rotation model. The derived equations describe the temperature and density dependences of the dielectric functions of the DHS liquid.     

Studies on the properties of ionic liquid BMIInCl4

An ionic liquid (IL) was prepared by directly mixing InCl₃ and 1-methyl-3-butylimidazolium chloride(BMIC) with molar ratio 1:1 under dry argon atmosphere. The densities, and surface tension of pure IL were determined at temperature range of (278.15 to 343.15±0.1K). The properties for ionic liquid based on group III were discussed using Glasser’s theory. The standard entropy, the surface energy and the crystal energy of ionic liquid were calculated, respectively. The crystal energy of ionic liquid is much lower than ionic solid and this is the underlying reason for forming ionic liquid at room temperature. In addition, a new theoretical model of IL, that is interstice model, was applied to calculate the thermal expansion coefficient of BMIInCl₄. The order of magnitude for the thermal expansion coefficient, a, calculated by the theoretical model is in good agreement with experimental value. The result shows that there is much reasonableness for the interstice model of ionic liquid. __________ Translated from Chemical Journal of Chinese University, 2005, 26(10)(in Chinese)     

Physicochemical properties of an N-decylpyridinium tetrachloroferrate ionic liquid

A low-temperature ionic liquid N-decylpyridinium tetrachloroferrate was synthesized. The temperature dependences of density and viscosity of the synthesized ionic liquid, as well as its thermal stability and magnetic properties were studied. The response of N-decylpyridinium tetrachloroferrate to magnetic field was visualized, and its structure was calculated at the DFT/B3LYB/6-31G(d,p) level of theory.     

Influence of stationary phase properties on the separation of ionic liquid cations by RP-HPLC

Different types of columns with specific structural properties were used for the separation of mixtures of ionic liquid cations. Two of them were home-made packings and the other two were commercial stationary phases. One of the home-made packings contained cholesterol ligands bonded chemically to silica (SG-CHOL) whereas the other one was a mixed stationary phase (SG-MIX) with cyanopropyl, aminopropyl, phenyl, octyl, and octadecyl ligands. RP-18e Innovation ChromolithTM Performance and Macrosphere 300 C4 packings were also used. A comparison of the separation possibilities offered by these columns for the substances in question revealed significant differences in performance. Packings containing surface-bonded functional groups that are able to undergo protonation are not suitable for separation of such compounds under the given analysis conditions (pH = 4). The best results were obtained for two alkyl stationary phases: butyl and octadecyl. Cluster analysis has also been performed for comparison of the ionic liquid cation properties.     

Carbon-based ionogels: tuning the properties of the ionic liquid via carbon-ionic liquid interaction

The behavior of two ionic liquids (ILs), 1-ethyl-3-methylimidazolium dicyanamide [Emim][DCA] and 1-ethyl-3-methylimidazolium triflate [Emim][TfO], in (meso)porous carbonaceous hosts was investigated. Prior to IL incorporation into the host, the carbon matrix was thermally annealed between 180 and 900 °C to control carbon condensation and surface chemistry. The resulting materials have an increasing "graphitic" carbon character with increasing treatment temperature, reflected in a modified behavior of the ILs when impregnated into the carbon host. The two ILs show significant changes in the thermal behavior as measured from differential scanning calorimetry; these changes can be assigned to anion-π interaction between the IL anions and the pore wall surfaces of these flexible carbonaceous support materials.     

Modulating properties of aqueous sodium dodecyl sulfate by adding hydrophobic ionic liquid

Altering and modifying important physicochemical properties of aqueous surfactant solutions is highly desirable as far as potential applications of such systems are concerned. Changes in the properties of aqueous solutions of a common anionic surfactant sodium dodecyl sulfate (SDS) are assessed in the presence of a common and popular 'hydrophobic' ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF(6)). Upon addition of up to approximately 0.10 wt% bmimPF(6), a dramatic decrease in critical micelle concentration (cmc) is accompanied by an increase in the degree of counterion dissociation (alpha) and micellar aggregation number (N(agg)) indicating micellar growth. However, in the range 0.10 wt% < or = bmimPF(6) 2.00 wt%, relatively gradual decrease in alpha and N(agg) is observed along with no change in cmc. Significantly decreased microfluidity of the aqueous SDS solutions on addition of bmimPF(6) is indicated by a fluorescence microviscosity probe 1,3-bis-(1-pyrenyl)propane which suggests partitioning of bmimPF(6) into the SDS micellar phase. Behavior of solvatochromic fluorescence probes, pyrene, pyrene-1-carboxaldehyde, and 2-(p-toluidino)naphthalene-6-sulfonate, confirms interaction, and possible complexation, between IL bmimPF(6) and anionic micellar surface. Increased solubility of bmimPF(6) with increasing SDS concentration further confirms SDS-bmimPF(6) interactions. Presence of strong electrostatic attraction between bmim(+) and anionic micellar surface is proposed to be the most dominant reason for these observations. All-in-all, unique role of a hydrophobic ionic liquid bmimPF(6) in modifying the properties of aqueous anionic sodium dodecyl sulfate is demonstrated.     

Study on the properties of amino acid ionic liquid EMIGly

In terms of standard addition method, the density and surface tension of an amino acid ionic liquid EMIGly(1-ethyl-3-methylimidazolium aminoacetate) were measured under dry argon atmosphere in the temperature range of 288.15-343.15 K. The properties of volume and surface for pure EMIGly were discussed in terms of the interstice model and Glasser's theory. The thermal expansion coefficient alpha = 5.03 x 10(-4) K(-1) calculated using interstice model is in good agreement with alpha (experimental) = 5.20 x 10(-4) K(-1).     

Surface structure of a "non-amphiphilic" protic ionic liquid

The nanostructure of the ethanolammonium nitrate (EtAN)-air surface has been investigated using X-ray reflectometry (XRR), vibrational sum frequency spectroscopy (VSFS) and neutral impact collision ion scattering spectroscopy (NICISS). The XRR data decays more rapidly than expected for a perfectly sharp interface, indicating a diffuse electron (scattering length) density profile. Modelling of the XRR data using three different fitting routines produced consistent interfacial profiles that suggest the formation of interfacial EtAN clusters. Consistent with this, VSFS reveals that the EtAN surface is predominantly covered by -CH(2)- moieties, with the -NH(3)(+) and -OH groups of the cation buried slightly deeper in the interface. The elemental profiles determined using NICISS also show enrichment of carbon relative to nitrogen and oxygen in the outermost surface layer, which is consistent with the surface cation orientation deduced from VSFS, and with the presence of EtAN aggregates at the liquid surface.     

Surface properties of liquid reactive oligomers

Spreading coefficients and the work of adhesion of oligomers to different substrates are calculated based on the results of studying the wettability and surface tension of ED-20 epoxy oligomer and oligooxyethyleneoxypropylene triols. It is shown that the addition of surfactant (ethoxylated alkyl phenols) considerably enhances the wettability of the studied oligomers. It is established that the addition of surfactant imparted to the properties of oligomers and surface energy characteristics of composites based on these oligomers nonlinearly depend on the degree of ethoxylation.     

Intra-cell ionic properties of twisted nematic liquid crystal cells

Under 1-kHz and low-frequency driving, we report our investigation of intra-cell ionic properties of two twisted nematic (TN) liquid crystal (LC) cells made of same LC mixture but different polyimide (PI) materials for LC alignments. A heterodyne interferometry system was used to measure the phase retardations of the TN cells versus applied voltages at 1 kHz. We also measured the phase retardations and currents of the TN cells versus time by applying a mid-grayscale voltage of 1.3 V at 0.1 Hz to the cells. Related to the above-measured data, we have developed equations to characterise the field-driven transports of mobile charge carriers within the PI films independently from that within the LC medium of same TN cell to obtain time-dependent in-cell voltages of mobile charge carries across the LC mixture and across two PI-alignment films, respectively. Our experimental methods can be used to optimise LC mixtures and PI materials for low-refresh-rate thin-film-transistor-driven liquid crystal displays (LCDs) for low power and provide bases for further investigations on mobile-charge-carrier generation and transport within thin in-cell PI-alignment films as well as within the LC mixture of same LC cell.     

Synthesis and mesomorphic properties of rigid-core ionic liquid crystals

Ionic liquid crystals combine the unique solvent properties of ionic liquids with self-organization found for liquid crystals. We report a detailed analysis of the structure-property relationship of a series of new imidazolium-based liquid crystals with an extended aromatic core. Investigated parameters include length and nature of the tails, the length of the rigid core, the lateral substitution pattern, and the nature of the counterion. Depending on the molecular structure, two mesophases were observed: a bilayered SmA2 phase and the more common monolayered SmA phase, both strongly interdigitated. Most materials show mesophases stable to high temperatures. For some cases, crystallization could be suppressed, and room-temperature liquid crystalline phases were obtained. The mesomorphic properties of several mixtures of ionic liquid crystals were investigated. Many mixtures showed full miscibility and ideal mixing behavior; however, in some instances we observed, surprisingly, complete demixing of the component SmA phases. The ionic liquid crystals and mixtures presented have potential applications, due to their low melting temperatures, wide temperature ranges, and stability with extra ion-doping.     

Research on electrochemical properties of nonaqueous ionic liquid microemulsions

The nonaqueous ionic liquid (IL) microemulsions composed of 1-butyl-3-methylimidazolium tetrafluoroborate, Triton X-100, and toluene were prepared and the electrochemical properties of the nonaqueous IL microemulsions were investigated in this paper. It is shown that characteristics of the nonaqueous IL microemulsions such as electrical conductivity, electrochemical window, and solubility are good, which indicate that the nonaqueous IL microemulsions can be used as electrolyte for electrochemical research. The electrochemical properties of the nonaqueous IL microemulsions were researched by cyclic voltammetry (CV) and electrochemical impedance spectroscopy methods using potassium ferricyanide as electroactive probe. It was found that the reversibility was better and the peak current densities of CV were higher for the [Fe(CN)₆]³⁻/[Fe(CN)₆]⁴⁻ electrode reaction in the nonaqueous IL microemulsions than those in IL. However, the electrochemical behavior of the probe in the nonaqueous IL microemulsions with different microenvironments (oil-in-IL, IL-in-oil, and bicontinuous) was different. The electrochemical property of the probe in the oil-in-IL microemulsion was the best, which was studied in detail.     

High-performance supported catalysts with an ionic liquid layer for the selective hydrogenation of acetylene

Pd-Ag shell catalysts impregnated with two different ionic liquids show considerable improvements both in ethylene selectivity and reduced ethane formation in the selective hydrogenation of acetylene under tail-end conditions.     

Influence of the ionic liquid/gas surface on ionic liquid chemistry

Applications such as gas storage, gas separation, NP synthesis and supported ionic liquid phase catalysis depend upon the interaction of different species with the ionic liquid/gas surface. Consequently, these applications cannot proceed to the full extent of their potential without a profound understanding of the surface structure and properties. As a whole, this perspective contains more questions than answers, which demonstrates the current state of the field. Throughout this perspective, crucial questions are posed and a roadmap is proposed to answer these questions. A critical analysis is made of the field of ionic liquid/gas surface structure and properties, and a number of design rules are mined. The effects of ionic additives on the ionic liquid/gas surface structure are presented. A possible driving force for surface formation is discussed that has, to the best of my knowledge, not been postulated in the literature to date. This driving force suggests that for systems composed solely of ions, the rules for surface formation of dilute electrolytes do not apply. The interaction of neutral additives with the ionic liquid/gas surface is discussed. Particular attention is focussed upon H(2)O and CO(2), vital additives for many applications of ionic liquids. Correlations between ionic liquid/gas surface structure and properties, ionic liquid surfaces plus additives, and ionic liquid applications are given.