Selective recognition of cyanide anion via formation of multipoint NH and phenyl CH hydrogen bonding with acyclic ruthenium bipyridine imidazole receptors in water

Five imidazole-based anion receptors A-E are designed for cyanide anion recognition via hydrogen bonding interaction in water. Only receptors A [Ru(bpy)(2)(mpipH)](ClO(4))(2) (bpy is bipyridine and mpipH is 2-(4-methylphenyl)-imidazo[4,5-f]-1,10-phenanthroline) and E [Ru(2)(bpy)(4)(mbpibH(2))](ClO(4))(4) (mbpibH(2) is 1,3-bis([1,10]-phenanthroline-[5,6-d]imidazol-2-yl)benzene) selectively recognize CN(-) from OAc(-), F(-), Cl(-), Br(-), I(-), NO(3)(-), HSO(4)(-), ClO(4)(-), H(2)PO(4)(-), HCO(3)(-), N(3)(-), and SCN(-) anions in water (without organic solvent) at physiological conditions via formation of multiple hydrogen bonding interaction with binding constants of K(A(H2O)) = 345 ± 21 and K(E(H2O)) = 878 ± 41, respectively. The detection limits of A and E toward CN(-) in water are 100 and 5 μM, respectively. Receptor E has an appropriate pK(a2)* value (8.75) of N-H proton and a C-shape cavity structure with three-point hydrogen bonding, consisting of two NH and one cooperative phenyl CH hydrogen bonds. Appropriate acidity of N-H proton and multipoint hydrogen bonding are both important in enhancing the selectivity and sensitivity toward CN(-) in water. The phenyl CH···CN(-) hydrogen bonding interaction is observed by the HMBC NMR technique for the first time, which provides an efficient approach to directly probe the binding site of the receptor toward CN(-). Moreover, CN(-) induced emission lifetime change of the receptor has been exploited in water for the first time. The energy-optimized structure of E-CN adduct is also proposed on the basis of theoretical calculations.     

Synthesis, structure and reactivity of palladium(II) complexes of chiral N-heterocyclic carbene-imine and -amine hybrid ligands

The synthesis and structures of chiral N-heterocyclic carbene (NHC)-N-donor complexes of silver(I) and palladium(II) are reported. The X-ray structure of an NHC-imine silver(I) complex [((nPr)CN(CHPh))AgBr](2) exhibits an Ag(2)Br(2) dimer motif where the imine group is not coordinated to the silver atom. Reaction between 2 and [PdCl(2)(MeCN)(2)] gives the palladium(II) complex [(kappa(2)-(nPr)CN(CHPh))PdCl(2)](3) that contains a chelating NHC-imine ligand as shown by single-crystal X-ray diffraction. Slow hydrolysis of related complexes [(kappa(2)-(nPr)CN(CHPh))PdCl(2)](3) and [(kappa(2)-((Ph)(2)CH)CN(CHPh))PdCl(2)](4) using triethylammonium chloride and water lead to the precipitation of single crystals of insoluble NHC-amino palladium(II) complexes [(kappa(2)-(nPr)CN(H(2)))PdCl(2)](6) and [(kappa(2)-((Ph)(2)CH)CN(H(2)))PdCl(2)](7), respectively. In the solid state, complexes 6 and 7 both exhibit intermolecular hydrogen bonding between chlorine and an amino-hydrogen atom resulting in an infinite chain structure. Substitution of an amino hydrogen for an ethyl group gives the soluble complex [(kappa(2)-(iPr)CN((H)Et))PdCl(2)](12). Reaction between two equivalents of 2 and [PdCl(2)(MeCN)(2)] gives the di-NHC complex [(kappa(1)-(nPr)CN(CHPh))(2)PdCl(2)](5) that does not contain a coordinated imine as shown by single crystal X-ray diffraction. Conproportionation between 5 and an equivalent of [PdCl(2)(MeCN)(2)] to does not occur at temperatures up to 100 degrees C in CD(3)CN.     

Reactivity of TCNE or TCNQ derivatives of quinonoid zwitterions: platinum-induced HCN elimination vs oxidative-addition

The reaction of the functional, zwitterionic quinonoid molecule (6E)-4-(butylamino)-6-(butyliminio)-3-oxo-2-(1,1,2,2-tetracyanoethyl)cyclohexa-1,4-dien-1-olate, [C(6)H-2-{C(CN)(2)C(CN)(2)H}]-4,6-(···NH n-Bu)(2)-1,3(···O)(2) (2), which has been previously prepared by regioselective insertion of TCNE into the C-H bond adjacent to the C···O bonds of the zwitterionic benzoquinone monoimine (6E)-4-(butylamino)-6-(butyliminio)-3-oxocyclohexa-1,4-dien-1-olate, C(6)H(2)-4,6-(···NHn-Bu)(2)-1,3-(···O)(2) (1), with 2 equiv of [Pt(C(2)H(4))(PPh(3))(2)], afforded the Pt(0) complex [Pt(PPh(3))(2)(4)] (6) (4 = 2-HCN; (6E)-4-(butylamino)-6-(butyliminio)-3-oxo-2-(1,2,2-tricyanoethenyl)cyclohexa-1,4-dien-1-olate), in which a tricyanoethenyl moiety is π-bonded to the metal. A metal-induced HCN elimination reaction has thus taken place. The same complex was obtained directly by the reaction of 1 equiv of the Pt(0) complex [Pt(C(2)H(4))(PPh(3))(2)] with the olefinic ligand [C(6)H-2-{C(CN)═C(CN)(2)}]-4,6-(···NHn-Bu)(2)-1,3-(···O)(2)) (4), previously obtained by the reaction of 2 with NEt(3) in THF. A similar reactivity pattern was observed between 2 and 2 equiv of the Pd(0) precursor [Pd(dba)(2)] in the presence of dppe, which led to [Pd(dppe)(4)] (7), which was also directly obtained from 4 and 1 equiv [Pd(dba)(2)]/dppe. In contrast to the behavior of the TCNE derivative 2, the reaction of the TCNQ derivative (6E)-4-(butylamino)-6-(butyliminio)-2-(dicyano(4-(dicyanomethyl)phenyl)methyl)-3-oxocyclohexa-1,4-dien-1-olate, [C(6)H-2-{C(CN)(2)p-C(6)H(4)C(CN)(2)H}]-4,6-(···NHn-Bu)(2)-1,3-(···O)(2)) (3), with 2 equiv of [Pt(C(2)H(4))(PPh(3))(2)] led to formal oxidative-addition of the C-H bond of the C(CN)(2)H moiety to give the Pt(II) hydride complex trans-[PtH(PPh(3))(2){N═C═C(CN)p-C(6)H(4)C(CN)(2)-2-[C(6)H-4,6-(···NHn-Bu)(2)-1,3-(···O)(2))}] (8). The molecular structures of 3, 4, 6·0.5(H(2)O), and 8·3(CH(2)Cl(2)) have been determined by single-crystal X-ray diffraction.     

C(5)N(-) anion and new carbenic isomers of cyanodiacetylene: a matrix isolation IR study

Products of the vacuum-UV photolysis of cyanodiacetylene (HC(5)N) in solid argon -- the anion C(5)N(-), imine HNC(5), and the branched carbene C(4)(H)CN -- have been identified by IR absorption spectroscopy, in addition to the already discovered isonitrile HC(4)NC. Spectral assignments were assisted by deuterium substitution experiments, by BD(T) calculations, and by the results of a recent density functional theory study.     

Emissive Osmium(II) Complexes Supported by N-Heterocyclic Carbene-based C(∧)C(∧)C-Pincer Ligands and Aromatic Diimines

Osmium(II) complexes containing N-heterocyclic carbene (NHC)-based pincer ligand 1,3-bis(1-methylimidazolin-2-ylidene)phenyl anion (C(1)(∧)C(∧)C(1)) or 1,3-bis(3-methylbenzimidazolin-2-ylidene)phenyl anion (C(2)(∧)C(∧)C(2)) and aromatic diimine (2,2'-bipyridine (bpy), 1,10-phenanthroline (phen), or 4,4'-diphenyl-2,2'-bipyridine (Ph(2)bpy)) in the form of [Os(C(∧)C(∧)C)(N(∧)N)(CO)](+) have been prepared. Crystal structures for these complexes show that the Os-C(NHC) bonds are essentially single (Os-C(NHC) distances = 2.079(5)-2.103(7) ?). Spectroscopic comparisons and time-dependent density functional theory (TD-DFT) calculations suggest that the lowest-energy electronic transition associated with these complexes (λ(max) = 493-536 nm, ε(max) = (5-10) × 10(3) dm(3) mol(-1) cm(-1), solvent = CH(3)CN) originate from a d(π)(Os(II)) → π*(N(∧)N) metal-to-ligand charge transfer transition, where the d(π)(Os(II)) and π*(N(∧)N) levels contain significant contribution from the C(∧)C(∧)C ligands. All these complexes are emissive in the red-spectral region (674-731 nm) with quantum yields of 10(-4)-10(-2) and emission lifetimes of around 1-6 μs. Transient absorption spectroscopy and spectroelectrochemical measurements have also been used to probe the nature of the emissive excited-states. Overall, this joint experimental and theoretical investigation reveals that the C(∧)C(∧)C ligands can be used to modulate the photophysical properties of a [Os(N(∧)N)] core via the formation of the hybrid [Os + C(∧)C(∧)C] frontier orbitals.     

High heat of hydrogen adsorption and guest-responsive magnetic modulation in a 3D porous pillared-layer coordination framework

A bimetallic pillared-layer coordination framework {[Mn(3)(bipy)(3)(H(2)O)(4)][Cr(CN)(6)](2)·2(bipy)·4(H(2)O)}(n) has been constructed using a cyanometallate anion ([Cr(CN)(6)](3-)) and an organic linker (4,4'-bipyridyl) that provides high heat of hydrogen adsorption (～11.5 kJ mol(-1)) and shows guest dependent magnetic modulation.     

Selective two-step oxidation of μ2-S ligands in trigonal prismatic unit {Re3(μ6-C)(μ2-S)3Re3} of the bioctahedral cluster anion [Re12CS17(CN)6]6–

An oxidation of cluster anion [Re(12)CS(17)(CN)(6)](6-) by H(2)O(2) in water has been investigated. It was shown that selective two-step oxidation of bridging μ(2)-S-ligands in trigonal prismatic unit {Re(3)(μ(6)-C)(μ(2)-S)(3)Re(3)} takes place. The first stage runs rapidly, whereas the speed of the second stage depends on intensity of ultraviolet irradiation of the reaction mixture. Each stage of the reaction is accompanied by a change in the solution's color. In the first stage of the oxidation, the cluster anion [Re(12)CS(14)(SO(2))(3)(CN)(6)](6-) is produced, in which all bridging S-ligands are turned into bridging SO(2)-ligands. The second stage of the oxidation leads to formation of the anion [Re(12)CS(14)(SO(2))(2)(SO(3))(CN)(6)](6-), in which one of the SO(2)-ligands underwent further oxidation forming the bridging SO(3)-ligand. Seven compounds containing these anions were synthesized and characterized by a set of different methods, elemental analyses, IR and UV/vis spectroscopy, and quantum-chemical calculations. Structures of some compounds based on similar cluster anions, [Cu(NH(3))(5)](3)[Re(12)CS(14)(SO(2))(3)(CN)(6)]·9.5H(2)O, [Ni(NH(3))(6)](3)[Re(12)CS(14)(SO(2))(3)(CN)(6)]·4H(2)O, and [Cu(NH(3))(5)](2.6)[Re(12)CS(14)(SO(2))(3)(CN)(6)](0.6)[{Re(12)CS(14)(SO(2))(2)(SO(3))(CN)(5)(μ-CN)}{Cu(NH(3))(4)}](0.4)·5H(2)O, were investigated by X-ray analysis of single crystals.     

Synthesis and crystal structure of ionic multicomponent complex: ([Cr(I)(PhH)(2)].+))(2)[Co(II)TPP(C(60)(CN)(2))]-[C(60)(CN)(2)](.-).3(o-C(6)H(4)Cl(2)) containing C(60)(CN)(2).- radical anion and sigma-bonded diamagnetic Co(II)TPP(C(60)(CN)(2)) -anion

The ionic multicomponent complex complex: ([Cr(I)(PhH)(2)].+))(2)[Co(II)TPP(C(60)(CN)(2))]-[C(60)(CN)(2)](.-).3(o-C(6)H(4)Cl(2)) (Co(II)TPP: cobalt (II) tetraphenylporphyrin; Cr(PhH)(2): bis(benzene)chromium; o-C(6)H(4)Cl(2): o-dichlorobenzene) containing CoTPP(C(60)(CN)(2)- anion and C(60)(CN)(2).- radical anion was obtained. The complex has the cage structure with channels, which accommodate Cr(I)(PhH)(2)(.+) and o-C(6)H(4)Cl(2) molecules. For the first time the sigma-bonding of Co(II)TPP to the fullerene radical anion with the essentially shortened Co.C(C(60)(CN)(2)) contact of 2.282 A is observed. The sigma-bonding results in the diamagnetism of Co(II)TPP(C(60)(CN)(2))(-) anion. The nonbonded C(60)(CN)(2)(.-) radical anion retains both the C(2)(v)symmetry and the shape of the molecule. The length of the C(triple bond)N bonds is 1.141 and 1.152 A.     

Synthesis, structures, and properties of ruthenium(II) complexes of N-(1,10-phenanthrolin-2-yl)imidazolylidenes

Mononuclear ruthenium complexes [RuCl(L1)(CH(3)CN)(2)](PF(6)) (2a), [RuCl(L2)(CH(3)CN)(2)](PF(6)) (2b), [Ru(L1)(CH(3)CN)(3)](PF(6))(2) (4a), [Ru(L2)(CH(3)CN)(3)](PF(6))(2) (4b), [Ru(L2)(2)](PF(6))(2) (5), [RuCl(L1)(CH(3)CN)(PPh(3))](PF(6)) (6), [RuCl(L1)(CO)(2)](PF(6)) (7), and [RuCl(L1)(CO)(PPh(3))](PF(6)) (8), and a tetranuclear complex [Ru(2)Ag(2)Cl(2)(L1)(2)(CH(3)CN)(6)](PF(6))(4) (3) containing 3-(1,10-phenanthrolin-2-yl)-1-(pyridin-2-ylmethyl)imidazolylidene (L1) and 3-butyl-1-(1,10-phenanthrolin-2-yl)imidazolylidene (L2) have been prepared and fully characterized by NMR, ESI-MS, UV-vis spectroscopy, and X-ray crystallography. Both L1 and L2 act as pincer NNC donors coordinated to ruthenium (II) ion. In 3, the Ru(II) and Ag(I) ions are linked by two bridging Cl(-) through a rhomboid Ag(2)Cl(2) ring with two Ru(II) extending to above and down the plane. Complexes 2-8 show absorption maximum over the 354-428 nm blueshifted compared to Ru(bpy)(3)(2+) due to strong σ-donating and weak π-acceptor properties of NHC ligands. Electrochemical studies show Ru(II)/Ru(III) couples over 0.578-1.274 V.     

New synthesis, properties, and oxidizing ability of 1,3-dimethyl-5,10-methanocycloundeca[4,5]furo[2,3-d]pyrimidin- 2,4(1,3H)-dionylium tetrafluoroborate

A novel synthesis of 1,3-dimethyl-5,10-methanocycloundeca[4,5]furo[2,3-d]pyrimidin-2,4(1,3H)-dionylium tetrafluoroborate (10(+).BF(4)(-)) was accomplished by the reaction of 3,8-methano[11]annulenone with dimethylbarbituric acid and following acidic cyclization, albeit in low yield. Remarkable structural characteristics were suggested on inspection of the spectral data and MO calculation, and it was clarified that the positive charge is largely localized at the C11. The pK(R+) value of cation 10(+) was determined spectrophotometrically to be 4.6, which is much smaller by 4.1 pH unit than that of 1,3-dimethyl-7,12-methanocycloundeca[4,5]furo[2,3-d]pyrimidin-2,4(1,3H)-dionylium tetrafluoroborate (pK(R+) = 8.7). This value is also smaller by 1.6 pH unit than that of the parent 1,6-methano[11]annulenylium ion (pK(R+) = 6.2). The feature is rationalized on the basis of the perturbation derived from the bond fixation of the parent cation. The electrochemical reduction of 10(+) exhibited less negative reduction potential at -0.39 (V vs Ag/AgNO(3)) upon cyclic voltammetry (CV). In a search for reactivity, reactions of 10(+) with some nucleophiles, hydride and diethylamine, were carried out to give mixtures of C11- and C13-adducts. In both reactions, the methano-bridge controls the nucleophilic attacks to the C13 to favor exo selectivity. The photoinduced autorecycling oxidation reactions of 10(+).BF(4)(-) toward some amines under aerobic conditions were carried out to give the corresponding imines (isolated by converting to the corresponding 2,4-dinitrophenylhydrazones) in 719-3286% yield (recycling number of 10(+).BF(4)(-): 7.2-32.9).     

Bimetallic carbonyl thiolates as functional models for Fe-only hydrogenases

The anion [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PMe(3))](-) (2(-)) is protonated by sulfuric or toluenesulfonic acid to give HFe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PMe(3)) (2H), the structure of which has the hydride bridging the Fe atoms with the PMe(3) and CN(-) trans to the same sulfur atom. (1)H, (13)C, and (31)P NMR spectroscopy revealed that HFe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PMe(3)) is stereochemically rigid on the NMR time scale with four inequivalent carbonyl ligands. Treatment of 2(-) with (Me(3)O)BF(4) gave Fe(2)(S(2)C(3)H(6))(CNMe)(CO)(4)(PMe(3)) (2Me). The Et(4)NCN-induced reaction of Fe(2)(S(2)C(3)H(6))(CO)(6) with P(OMe)(3) gave [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)[P(OMe)(3)]](-) (4). Spectroscopic and electrochemical measurements indicate that 2H can be further protonated at nitrogen to give [HFe(2)(S(2)C(3)H(6))(CNH)(CO)(4)(PMe(3))](+) (2H(2)(+)). Electrochemical and analytical data show that reduction of 2H(2)(+) gives H(2) and 2(-). Parallel electrochemical studies on [HFe(2)(S(2)C(3)H(6))(CO)(4)(PMe(3))(2)](+) (3H(+)) in acidic solutions led also to catalytic proton reduction. The 3H(+)/3H couple is reversible, whereas the 2H(2)(+)/2H(2) couple is not, because of the efficiency of the latter as a proton reduction catalyst. Proton reduction is proposed to involve protonation of reduced diiron hydrides. DFT calculations establish that the regiochemistry of protonation is subtly dependent on the coligands but is more favorable to occur at the Fe-Fe bond for [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PMe(3))](-) than for [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)(PH(3))](-) or [Fe(2)(S(2)C(3)H(6))(CN)(CO)(4)[P(OMe)(3)]](-). The Fe(2)H unit stabilizes the conformer with eclipsed CN and PMe(3) because of an attractive electrostatic interaction between these ligands.     

Au(CN)4]- as a supramolecular building block for heterobimetallic coordination polymers

A series of the first coordination polymers using the [Au(CN)(4)](-) anion as a building block has been prepared. The planar tetracyanoaurate anion uses one, two, or four cyano groups to bridge to Ni(II) or Cu(II) centers and exhibits weak Au(III)-N(cyano) interactions between anions. Ni(en)(2)[Au(CN)(4)](2).H(2)O (1, en = ethylenediamine) is a molecular compound with the two [Au(CN)(4)](-) anions coordinating in a trans orientation to Ni(II) without further cyanide coordination. Cu(dien)[Au(CN)(4)](2) (2, dien = diethylenetriamine) forms a similar molecular complex; however, the dimensionality is increased through weak intermolecular Au-N(cyano) interactions of 3.002(14) A to form a 1-D zigzag chain. Cu(en)(2)[Au(CN)(4)](2) (3) also forms a molecular complex similar to 1, but with elongated axial bonds. The complex further aggregates through Au-N(cyano) interactions of 3.035(8) A to form a 2-D array. In [Cu(dmeda)(2)Au(CN)(4)][Au(CN)(4)] (4, dmeda = N,N-dimethylethylenediamine) one [Au(CN)(4)](-) anion coordinates via two cis-N(cyano) donors to the axial sites of two Cu(II) centers to form a 1-D zigzag chain of alternating [Cu(dmeda)(2)](2+) and [Au(CN)(2)](-) units; the other [Au(CN)(4)](-) anion forms a 1-D chain via Au-N(cyano) interactions. In [Cu(bipy)(H(2)O)(2)(Au(CN)(4))(0.5)][Au(CN)(4)](1.5) (5, bipy = 2,2'-bipyridine) one [Au(CN)(4)](-) anion uses all four cyano moieties to bridge four different Cu(II) centers, creating a 1-D chain.     

Hydrogen/chlorine exchange reactions of gaseous carbanions

Gas-phase reactions of three typical carbanions CH(2)NO(2)(-), CH(2)CN(-), and CH(2)S(O)CH(3)(-) with the chloromethanes CH(2)Cl(2), CHCl(3), and CCl(4), examined by tandem mass spectrometry, show a novel hydrogen/chlorine exchange reaction. For example, reaction between the nitromethyl anion CH(2)NO(2)(-) and carbon tetrachloride CCl(4) forms the ion CHClNO(2)(-). The suggested reaction mechanism involves nucleophilic attack by CH(2)NO(2)(-) at the chlorine of CCl(4) followed by proton transfer within the resulting complex [CH(2)ClNO(2) + CCl(3)(-)] to form CHClNO(2)(-) and CHCl(3). Two other carbanions CH(2)CN(-) and CH(2)S(O)CH(3)(-) also undergo the novel hydrogen/chlorine exchange reactions with CCl(4) but to a much smaller extent, their higher nucleophilicities favoring competitive nucleophilic attack reactions. Proton abstraction is the exclusive pathway in the reactions of these carbanions with CHCl(3). While CH(2)CN(-) and CH(2)S(O)CH(3)(-) promote mainly proton abstraction and nucleophilic displacement in reactions with CH(2)Cl(2), CH(2)NO(2)(-) does not react.     

mer-[Fe(pcq)(CN)3]-: a novel cyanide-containing building block and its application to assembling cyanide-bridged trinuclear FeIII2MnII complexes [pcq- = 8-(pyridine-2-carboxamido)quinoline anion

A new cyanide-containing building block K[Fe(pcq)(CN)(3)] [1; pcq(-) = 8-(pyridine-2-carboxamido)quinoline anion] containing a low-spin Fe(III) center with three cyanide groups in a meridional arrangement has been successfully designed and synthesized. Three cyanide-bridged trinuclear Fe(III)(2)Mn(II) complexes, [Fe(pcq)(CN)(3)](2)[Mn(CH(3)OH)(2)(H(2)O)(2)].2H(2)O (2), [Fe(pcq)(CN)(3)](2)[Mn(bipy)(2)].CH(3)OH.2H(2)O (3), and [Fe(pcq)(CN)(3)](2)[Mn(phen)(2)].CH(3)OH.2H(2)O (4), have been synthesized and structurally characterized. The magnetic susceptibilities of the three heterometallic complexes have been investigated.     

A high-pressure iron K-edge x-ray absorption spectral study of the spin-state crossover in (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))I(2) and (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))(BF(4))(2)

The room temperature iron K-edge X-ray absorption near edge structure spectra of (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))I(2) and (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))(BF(4))(2) have been measured between ambient and 88 and 94 kbar, respectively, in an opposed diamond anvil cell. The iron(II) in (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))I(2)undergoes the expected gradual spin-state crossover from the high-spin state to the low-spin state with increasing pressure. In contrast, the iron(II) in (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))(BF(4))(2) remains high-spin between ambient and 78 kbar and is only transformed to the low-spin state at an applied pressure of between 78 and 94 kbar. No visible change is observed in the preedge peak in the spectra of (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))I(2) with increasing pressure, whereas the preedge peak in the spectra of ((e[HC(3,5-(CH(3))(2)pz)(3)](2))(BF(4))(2) changes as expected for a high-spin to low-spin crossover with increasing pressure. The difference in the spin-state crossover behavior of these two complexes is likely related to the unusual behavior of (Fe[HC(3,5-(CH(3))(2)pz)(3)](2))(BF(4))(2) upon cooling.     

Multifunctional Ligands. Phosphinimine-Substituted Cyanofluoroaromatics Including X-ray Molecular Structures of Three Representative Ligands 4,6-(CN)(2)C(6)F(2)-1,3-(N=PPh(3))(2), 4,6-(CN)(2)C(6)F(2)-1,3-(N=PPh(2)Me)(2) and 4,6-(CN)(2)C(6)F(2)-1-(N=PPh(3))-3-(N=PPh(2)Me). Formation of Rhodium(I) Complexes

Reaction of 1,3-dicyanotetrafluorobenzene with 2 equiv of (trimethylsilyl)iminophosphoranes gave the disubstituted derivatives 4,6-(CN)(2)C(6)F(2)-1,3-AB: 1, A = B = (N=PPh(3)); 2, A = B = (N=PPh(2)Me); and 3, A = (N=PPh(3)), B = (N=PPh(2)Me). Monosubstituted compounds of the type 2,4-(CN)(2)C(6)F(3)-1-A; notably 4, A = (N=PPh(3)), and 5, A = (N=PPh(2)Me), were readily obtained by reaction of 1 molar equiv of the silylated iminophosphorane with the cyanofluoro aromatic. Substitution of the fluorine para to the CN group(s) occurs in all cases. Reactions of 1,2- and 1,4-dicyanotetrafluorobenzene with (trimethylsilyl)iminophosphoranes gave only monosubstituted derivatives 3,4-(CN)(2)C(6)F(3)-1-A (6, A = (N=PPh(3)), and 7, A = (N=PPh(2)Me)) and 2,5-(CN)(2)C(6)F(3)-1-A (8, A = (N=PPh(3)), and 9, A = (N=PPh(2)Me)), respectively, as the result of electronic deactivation of the second substitutional point. 1, 4,6-(CN)(2)C(6)F(2)-1,3-(N=PPh(3)), 2, 4,6-(CN)(2)C(6)F(2)-1,3-(N=PPh(2)Me)(2), and 3, 4,6-(CN)(2)C(6)F(2)-1-(N=PPh(3))-3-(N=PPh(2)Me) have been structurally characterized. For 1 (at 21 degrees C), monoclinic, C2/(c) (No. 15), a = 15.289(2) ?, b = 10.196(1) ?, c = 23.491(6) ?, beta = 91.63(2) degrees, V = 3660(2) ?(3), and Z = 4. The P=N bond length is 1.579(2) ? and the P(V)-N-C(phenyl) angle is 134.0(2) degrees. For 2, (at 21 degrees C) monoclinic, C2/(c) (No. 15), a = 18.694(2) ?, b = 8.576(1) ?, c = 40.084(4) ?, beta = 94.00(1) degrees, V = 6411(2) ?(3), and Z = 8. The P(1)=N(1) bond length is 1.570(4) ?, the P(2)=N(2) bond length is 1.589(3) ?, the P(1)-N(1)-C(14) angle is 131.6(3) degrees, and the P(2)-N(2)-C(16) angle is 131.3(3) degrees. For 3, (at -80 degrees C) monoclinic, P2(1)/c (No. 14), a = 9.210(1) ?, b = 18.113(2) ?, c = 20.015(2) ?, beta = 100.07(1) degrees, V = 3287(2) ?(3), and Z = 4. The P(1)=N(1) bond length (PPh(3) group) is 1.567(4) ?, the P(2)=N(2) bond length (PPh(2)Me group) is 1.581(5) ?, the P(1)-N(1)-C(1) angle is 140.4(4) degrees, and the P(2)-N(2)-C(3) angle is 129.4(4) degrees. These new multifunctional chelating ligands readily react with [Rh(cod)Cl](2) and AgClO(4) to give cationic Rh(I) complexes in which the imine and/or the nitrile groups are coordinated to the Rh center.     

Mechanism of formation of iron(II) complexes with pentadentate ligands via C-C bond formation between trans-[Fe(2,4-bis(2-pyridylmethylimino)pentane)(MeCN)2]ClO4]2.MeCN and various nitriles

The order of relative reactivity of nitriles for the formation of Fe(II) complexes (2s) with 3-(1-alkyl(or aryl)methyl)-1-imino-2,4-bis(2-pyridylmethylimine)(L(2)s) from that with 2,4-bis(2-pyridylmethylimono)pentane (L1), trans-[FeL(1)(MeCN)(2)][ClO(4)](2).MeCN (1), and various nitriles has been determined based on the following order: C(6)F(5)CN > 3,4-difluorobenzonitrile > 4-fluorobenzonitrile > C(6)H(5)CN > C(6)H(5)CH(2)CN > C(2)H(5)CN > MeCN > Me(2)CHCN >Me(3)CN. An iron(II) complex with L1 in a cis-configuration was prepared as the ternary complex [FeL(1)(bpy)][ClO(4)](2).1.5MeNO(2).0.5H(2)O, 3a (bpy = bipyridine). Compounds 2s and 3a undergo enantiomeric interconversion with an activation energy of ca. 60 kJ mol(-1).     

Synthesis and structures of some new types of lithium beta-diketiminates

The tetracyclic dilithio-Si,Si'-oxo-bridged bis(N,N'-methylsilyl-beta-diketiminates) 2 and 3, having an outer LiNCCCNLiNCCCN macrocycle, were prepared from [Li{CH(SiMe(3))SiMe(OMe)(2)}](infinity) and 2 PhCN. They differ in that the substituent at the beta-C atom of each diketiminato ligand is either SiMe(3) (2) or H (3). Each of and has (i) a central Si-O-Si unit, (ii) an Si(Me) fragment N,N'-intramolecularly bridging each beta-diketiminate, and (iii) an Li(thf)(2) moiety N,N'-intermolecularly bridging the two beta-diketiminates (thf = tetrahydrofuran). Treatment of [Li{CH(SiMe(3))(SiMe(2)OMe)}](8) with 2Me(2)C(CN)(2) yielded the amorphous [Li{Si(Me)(2)((NCR)(2)CH)}](n) [R = C(Me)(2)CN] (4). From [Li{N(SiMe(3))C(Bu(t))C(H)SiMe(3)}](2) (A) and 1,3- or 1,4-C(6)H(4)(CN)(2), with no apparent synergy between the two CN groups, the product was the appropriate (mu-C(6)H(4))-bis(lithium beta-diketiminate) 6 or 7. Reaction of [Li{N(SiMe(3))C(Ph)=C(H)SiMe(3)}(tmeda)] and 1,3-C(6)H(4)(CN)(2) afforded 1,3-C(6)H(4)(X)X' (X =CC(Ph)N(SiMe3)Li(tmeda)N(SiMe3)CH; X' = CN(SiMe3)Li(tmeda)NC(Ph)=C(H)SiMe3)(9). Interaction of A and 2[1,2-C(6)H(4)(CN)(2)] gave the bis(lithio-isoindoline) derivative [C6H4C(=NH)N{Li(OEt2)}C=C(SiMe3)C(Bu(t))=N(SiMe3)]2 (5). The X-ray structures of 2, 3, 5 and 9 are presented, and reaction pathways for each reaction are suggested.     

Facile ketene-ketene and ketene-ketenimine rearrangements: a study of the 1,3-migration of alpha-substituents interconverting alpha-imidoylketenes and alpha-oxoketenimines, a pseudopericyclic reaction

Theoretical calculations (B3LYP/6-311+G(3df,2p)//B3LYP/6-31G) of the 1,3 migration of NR(2) transforming alpha-oxoketenimines 1 to alpha-imidoylketenes 3 and vice versa indicate that this process is a pseudo-pericyclic reaction with a low activation energy (NH(2) 97 kJ mol(-1), N(CH3)(2) 62 kJ mol(-1)). The oxoketenimines were found to be more stable (by 18-35 kJ mol(-1)) which is in line with experimental observations. The hindered amine rotation in the amide and amidine moieties adjacent to the cumulenes are important in the migration of the NR(2) group, as one of the rotation transition states is close to the 1,3 migration pathway. This gives an interesting potential energy surface with a valley-ridge inflection (VRI) between the orthogonal hindered amine rotation and 1,3 migration transition states. The imidoylketene may also undergo ring closure to an azetinone 5; however, this is metastable, and under the conditions that allow the 1,3-migration, the oxoketenimine 1 will be favored. The imine NH E/Z-interconversion of the ketenimine group takes place by inversion and has a low activation barrier ( approximately 40 kJ mol(-1)). In all the amidines examined the E/Z-interconversion of the imine function was predicted to be by rotation with a high barrier (>80 kJ mol(-1)), in contrast to all other reported imine E/Z-interconversions which are by inversion.     

Stoichiometric reactivity of dialkylamine boranes with alkaline earth silylamides

Reactions of β-diketiminato group 2 silylamides, [HC{(Me)CN(2,6-(i)Pr(2)C(6)H(3))}(2)M(THF)(n){N(SiMe(3))(2)}] (M = Mg, n = 0; M = Ca, Sr, n = 1), and an equimolar quantity of pyrrolidine borane, (CH(2))(4)NH·BH(3), were found to produce amidoborane derivatives of the form [HC{(Me)CN(2,6-(i)Pr(2)C(6)H(3))}(2)MN(CH(2))(4)·BH(3)]. In reactivity reminiscent of analogous reactions performed with dimethylamine borane, addition of a second equivalent of (CH(2))(4)NH·BH(3) to the Mg derivative induced the formation of a species, [HC{(Me)CN(2,6-(i)Pr(2)C(6)H(3))}(2)Mg{N(CH(2))(4) BH(2)NMe(2)BH(3)}], containing an anion in which two molecules of the amine borane substrate have been coupled together through the elimination of one molecule of H(2). Both this species and a calcium amidoborane derivative have been characterised by X-ray diffraction techniques and the coupled species is proposed as a key intermediate in catalytic amine borane dehydrocoupling, in reactivity dictated by the charge density of the group 2 centre involved. On the basis of further stoichiometric reactions of the homoleptic group 2 silylamides, [M{N(SiMe(3))(2)}(2)] (M = Mg, Ca, Sr, Ba), with (CH(3))(2)NH·BH(3) and (i)Pr(2)NH·BH(3) reactivity consistent with successive amidoborane β-hydride elimination and [R(2)N[double bond, length as m-dash]BH(2)] insertion is described as a means to induce the B-N dehydrocoupling between amine borane substrates.