Reflection anisotropy spectroscopy: A new probe for the solid-liquid interface

Introducing reflection anisotropy spectroscopy (RAS) as a new probe for solid-liquid interfaces, we present results for the Au(110)/electrolyte interface which serves as a model system. We demonstrate that RAS is sensitive to surface phase transitions, step morphology, and electronic surface states. Using an empirical approach, the RA spectra are reproduced and features are identified which reflect the known character of the bias voltage driven (2x1) to (1x1) phase transition. RAS is established as an experimental technique to probe the electronic structure of solid-liquid interfaces in real time to study a wide range of interface properties.     

Intermolecular double-quantum NMR techniques to probe microstructures on porous media

In heterogeneous systems the amplitude of the intermolecular double-quantum (DQ) signal depends on sample heterogeneity over a correlation distance dc=pi/(gammaGct). In this paper two different CRAZED-type sequences were applied in a porous medium phantom. One of these sequences gives rise to a DQ-T2 weighted signal, while the other one gives rise to a DQ-T2* weighted signal. Experimental results indicate that tuning of the correlation distance dc in a porous medium can alter the DQ signal in a manner which depends on the microstructure. This is evident only using the CRAZED-type sequence which gives rise to a DQ-T2* weighted signal.     

Multi-dimensional inverse Laplace spectroscopy in the NMR of porous media

Multi-dimensional NMR methods based on Inverse Laplace Transformations (ILT) may be used to examine the behavior of liquid state molecules in a porous matrix. The ILT is particularly useful when the signal is characterized by multi-exponential decay, for example in spin relaxation or in the dephasing of the NMR spin echo signal associated with molecular diffusion under the influence of pulsed magnetic or internal field gradients. Both correlation and exchange experiments are possible, the latter providing insight regarding the migration of molecules between regions characterized by different local dynamics.     

一种新的模拟渗流运动的数值方法

根据格子Boltzmann方法及相关理论，建立了一个新的模拟渗流运动的数值模型，所得模型没有在边界上采取相应平均措施，同时还避免了一些非物理副产品的出现-实例计算数值结果与精确解符合较好，证明模型可靠- 关键词： 渗流 格子Boltzmann方法 数值模型     

Application of a portable nuclear magnetic resonance surface probe to porous media

A portable nuclear magnetic resonance (NMR) surface probe was used to determine the time-dependent self-diffusion coefficient D(t) of water molecules in two fluid-filled porous media. The measuring equipment and the inhomogeneous magnetic fields in the sensitive volume of the probe are described. It is discussed how to evaluate D(t) using a surface probe from the primary and stimulated echoes generated in three-pulse experiments. Furthermore, the evaluation of D(t) allows one to determine the geometrical structure of porous materials.     

A new method for simulation and analysis of displacement of fluids in porous media

Using the principle of diffusion-limited aggregation(DLA),a new model is introduced to simulate the displacement of one fluid by another in porous media.The results agree with experiments.apparently they do not leave out film-flow phenomena.Simultaneously,we also present a new numerical method to treat our results by the lattice Boltzmann method(LBM),All these will be helpful for analysing similar subjects.     

Kolmogorov dispersion for turbulence in porous media: A conjecture

We will utilise the self-avoiding walk (SAW) mapping of the vortex line conformations in turbulence to get the Kolmogorov scale dependence of energy dispersion from SAW statistics, and the knowledge of the effects of disordered fractal geometries on the SAW statistics. These will give us the Kolmogorov energy dispersion exponent value for turbulence in porous media in terms of the size exponent for polymers in the same. We argue that the exponent value will be somewhat less than for turbulence in porous media.     

NMR difference probe: a dual-coil probe for NMR difference spectroscopy

A unique probe designed to acquire nuclear magnetic resonance difference spectra of two samples is presented. The NMR Difference Probe contains two sample coils in a resonant circuit that switches between parallel excitation and serial acquisition to cancel common signals such as solvent peaks and impurities. Two samples containing a common analyte, acetonitrile, were used to demonstrate signal cancellation in a difference spectrum collected with a single pulse experiment. The cancellation was over 96% effective. The approach described has applications in the areas of solvent subtraction and spectral simplification.     

Surface-enhanced spectroscopy: Toward practical analysis probe

Surface-enhanced spectroscopy (SES) is a consequence of extreme electromagnetic fields and chemical interactions near a surface. SES is highly sensitive and selective and has been exploited in chemistry, physics, biology, and medicine. It is a rapidly developing technique and is expected to become an important analysis tool. This review introduces theories and concepts of SES techniques including surface-enhanced (SE) Raman scattering, SE infrared absorption, SE chiroptical spectroscopy, and SE fluorescence. Then recent research and applications are discussed to indicate current challenges and future directions.     

Lattice Boltzmann method on quadtree grids for simulating fluid flow through porous media: A new automatic algorithm

During the past two decades, the lattice Boltzmann (LB) method has been introduced as a class of computational fluid dynamic methods for fluid flow simulations. In this method, instead of solving the Navier Stocks equation, the Boltzmann equation is solved to simulate the flow of a fluid. This method was originally developed based on uniform grids. However, in order to model complex geometries such as porous media, it can be very slow in comparison with other techniques such as finite differences and finite elements. To eliminate this limitation, a number of studies have aimed to formulate the lattice Boltzmann on the unstructured grids. This paper deals with simulating fluid flow through a synthetic porous medium using the LB method and on the quadtree grid structure. To this end, the LB method was used on nonuniform grids coupled with a technique for image reconstruction which resulted in the quadtree grids for simulation of fluid flow through porous media. Accuracy and efficiency of this algorithm is compared against the conventional LB method based on uniform grids. While the decrease in computational time in the proposed LB method on nonuniform grids is found to be significant regarding the size of the initial and reconstructed images, the same level of accuracy is obtained when compared with the conventional LB method on uniform grids.     

A new hadron spectroscopy

QCD-motivated models for hadrons predict an assortment of “exotic” hadrons that have structures that are more complex than the quark-antiquark mesons and three-quark baryons of the original quark-parton model. These include pentaquark baryons, the six-quark H-dibaryon, and tetraquark, hybrid and glueball mesons. Despite extensive experimental searches, no unambiguous candidates for any of these exotic configurations have been identified. On the other hand, a number of meson states, one that seems to be a proton-antiproton bound state, and others that contain either charmed-anticharmed quark pairs or bottom-antibottom quark pairs, have been recently discovered that neither fit into the quark-antiquark meson picture nor match the expected properties of the QCD-inspired exotics. Here I briefly review results from a recent search for the H-dibaryon, and discuss some properties of the newly discovered states -the proton-antiproton state and the so-called XY Z mesons- and compare them with expectations for conventional quark-antiquark mesons and the predicted QCD-exotic states.     

Terahertz time-domain spectroscopy of a simulated pore structure to probe particle size and porosity of porous rock

The particle sizes and porosities of simulated pore structures are probed by terahertz time-domain spectroscopy.A double-peak time-domain spectrum phenomenon is observed when the terahertz（THz） pulses illuminated a pore and a particle. The amplitudes of the two peaks depend strongly and monotonically on the particle size and porosity. A model is used to study the phenomenon, and the computational results agreed with the experimental measurements. These measurements indicate the terahertz spectroscopic behaviors of pores and particles, suggesting that terahertz spectroscopy can be used as a noncontact probe of porosity.     

Polarized fluorescence and absorption spectroscopy of 1,32-dihydroxy-dotriacontane-bis-rhodamine 101 ester. A new and lipid bilayer-spanning probe

We report on the properties of 1,32-dihydroxy-dotriacontane-bis-rhodamine 101 ester (Rh101C₃₂Rh101) in lipid bilayers of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and in liquid solvents. The results are compared with those of rhodamine 101 octadecanyl ester (Rh101C₁₈). Both molecules are solubilized in the lipid bilayer and the Rh101 moieties are anchored in the lipid-water interface, so that the electronic transition dipole moments (S ₀ S ₁) are oriented preferentially in the plane of the bilayer. At low concentrations of the dyes in lipid bilayers of DOPC, the fluorescence relaxation is single exponential with a lifetime of =4.9±0.2 ns. The relative fluorescence quantum yield of _C32/_C18 0.95 in DOPC vesicles. These results strongly suggest that only a small fraction of the Rh101C₃₂Rh101 molecules are quenched, by, for example, intra- or intermolecular dimers in the ground state at mole fractions of less than 0.1% in the lipid bilayers. For Rh101C₃₂Rh101 in lipid vesicles, the steady-state and time-resolved fluorescence anisotropies are compatible with efficient intramolecular electronic energy transfer. It is concluded that nearly every Rh101C₃₂Rh101 molecule is spanning across the lipid bilayer of DOPC.     

Thermal-wave detection and characterisation of sub-surface defects

Results of the analysis of air-gap and thermal-contact resistance defects are presented. The analysis is illustrated by model predictions of the influence of such defects in a number of important coated and uncoated materials. Experimental results of defects in steel and aluminium coated steel samples are presented and compared with theory. These results show the importance of the lateral extent of the defect and the presence of contact points within the defect.     

A new approach to determining symmetry groups of filtration properties of porous media in nonlinear filtration laws

Theoretical analysis of filtration properties of porous media for orthotropic and monoclinic symmetry groups has been carried out. It is shown how it is possible to establish a type of symmetry with the help of special laboratory investigations and to distinguish groups with orthotropic and monoclinic symmetry. It is established that the criterion for solving this problem is the use of nonlinear Darcy law at high flow velocities, where the effects of asymmetry of filtration properties manifest themselves upon a change in the flow direction.