Determination of acrolein and other carbonyls in cigarette smoke using coupled silica cartridges impregnated with hydroquinone and 2,4-dinitrophenylhydrazine

A new method for the determination of acrolein and other carbonyls in cigarette smoke using a dual cartridge system has been developed. Each cartridge consists of reagent-impregnated silica particles. The first contains hydroquinone (HQ) for the inhibition of acrolein polymerization, while the second contains 2,4-dinitrophenylhydrazine (DNPH) for the derivatization of carbonyls. Smoke samples were firstly drawn through the cartridge containing HQ-impregnated silica (HQ-silica) and then through the DNPH-impregnated silica (DNPH-silica). Acrolein in the sample was completely trapped in the first HQ-silica cartridge. Some other airborne carbonyls were also trapped by the HQ-silica, and those that pass through were trapped in the second DNPH-silica cartridge. Extraction was performed in the reverse direction to air sampling. When solvent was eluted through the dual-cartridges, excess DNPH was washed into the HQ bed where it reacted with acrolein and other trapped carbonyls to form the corresponding hydrazone derivatives. All of the hydrazones derived from airborne carbonyls were completely separated and measured using high-performance liquid chromatography. This HQ-DNPH-method can be applied for the determination of acrolein and other α,β-unsaturated aldehydes, such as crotonaldehyde, in cigarette smoke.     

Kinetic analysis of isothermal decomposition of 2,4-dinitrophenylhydrazine using differential scanning calorimetry

Differential scanning calorimetry was used to study the thermal decomposition of 2,4-dinitrophenylhydrazine (DNPH) in isothermal regime. The DSC curves were carried out at several constant temperatures lower than the melting temperature. The standard isoconversional analysis of the obtained curves suggests an autocatalytic decomposition mechanism. This mechanism is also supported by the temperature dependence of the observed induction periods.     

Determination of linear aliphatic aldehydes in heavy metal containing waters by high-performance liquid chromatography using 2,4-dinitrophenylhydrazine derivatization

A simple and sensitive method is described for the determination of picomolar amounts of C₁–C₉ linear aliphatic aldehydes in waters containing heavy metal ions. In this method, aldehydes were first derivatized with 2,4-dinitrophenylhydrazine (DNPH) at optimized pH 1.8 for 30 min and analyzed by HPLC with UV detector at 365 nm. Factors affecting the derivatization reaction of aldehydes and DNPH were investigated. Cupric ion, an example of heavy metals, is a common oxidative reagent, which may oxidize DNPH and greatly interfere with the determination of aldehydes. EDTA was used to effectively mask the interferences by heavy metal ions. The method detection limits for direct injection of derivatized most aldehydes except formaldehyde were of the order of 7–28 nM. The detection limit can be further lowered by using off-line C₁₈ adsorption cartridge enrichment. The recoveries of C₁–C₉ aldehydes were 93–115% with a relative standard deviation of 3.6–8.1% at the 0.1 μM level for aldehydes. The HPLC–DNPH method has been applied for determining aldehyde photoproducts from Cu(II)–amino acid complex systems.     

In situ continuous derivatization/pre-concentration of carbonyl compounds with 2,4-dinitrophenylhydrazine in aqueous samples by solid-phase extraction: Application to liquid chromatography determination of aldehydes

A rapid and straightforward continuous solid-phase extraction system has been developed for in situ derivatization and pre-concentration of carbonyl compounds in aqueous samples. Initially 2,4-dinitrophenylhydrazine, the derivatizing agent, was adsorbed on a C₁₈ mini-column and then 15-ml of sample were continuously aspirated into the flow system, where the derivatization and pre-concentration of the analytes (low-molecular mass aldehydes) were performed simultaneously. Following elution, 20 μl of the extract were injected into a LC-DAD system, in which hydrazones were successfully separated in 12 min on a RP-C₁₈ column using a linear gradient mobile phase of acetonitrile-water of 60-100% acetonitrile for 8 min, flowing at 0.5 ml/min. The whole analytical process can be accomplished within ca. 35 min. Under optimum conditions, limits of detection were obtained between 0.3 and 1.0 μg/l and RSDs (inter-day precision) from 1.2 to 4.6%. Finally, some applications on water samples are presented with recoveries ranged from 95.8 to 99.4%.     

Determination of carbonyl compounds in the atmosphere by DNPH derivatization and LC-ESI-MS/MS detection

A method of determination of 32 carbonyl compounds by high performance liquid chromatography (HPLC) and electrospray ionization (ESI) tandem mass spectrometry (MS/MS) after derivatization with 2,4-dinitrophenylhydrazine (DNPH) was developed and successfully applied to the atmosphere sample of a residential area of Liwan District (S1) and a research institute of Tianhe District (S2) in Guangzhou, China. Some operation conditions of ESI-MS/MS in the negative ion mode including selection of parent and daughter ions, declustering potential (DP), entrance potential (EP), collision energy (CE), collision cell exit potential (CXP) and effect of buffer in ESI-MS/MS process were optimized. The regression coefficient of the calibration curves (R²), recovery, reproducibility (R.S.D., n = 5) and limit of detection (LOD) were in the range of 0.9938-0.9999, 90-104%, 1.7-11% and 0.4-9.4 ng/m³, respectively. Among most of the samples, acetone was the most abundant carbonyl in two sampling sites and formaldehyde, acetaldehyde and butyraldehyde/2-butanone were also abundant carbonyls. In contrast to LC-UV method, the LOD, the separation of some co-eluting compounds and the precision (mainly to higher molecular weight carbonyls) are all improved by LC-ESI-MS/MS.     

A chemical potential driven micro-membrane sampler and its application for the determination of trace carbonyl compounds in air

A chemical potential driven micro-membrane sampler for enrichment of trace gaseous carbonyl compounds has been developed. The sampler is composed of exposed parts with membrane and analysis parts with polypropylene tube. The membrane acts as a barrier, through which the analytes dynamically diffuse and transfer from absorbents present outside to extract solvent inside through the difference of chemical potential. Formaldehyde and acetic acid were selected as verification samples. Quantification is achieved through high performance liquid chromatography (HPLC) analysis. The mass of analytes determined shows a linear correlation with concentration of the gaseous analytes. The limits of detection of formaldehyde and acetic acid after 8 h sampling were 3.32 and 0.76 μg m⁻³.     

Application of a data-processing model to determine the optimal sampling conditions for liquid phase trapping of atmospheric carbonyl compounds

The reactivity of two fluorescent derivatization reagents, 2-diphenyl-1,3-indandione-1-hydrazone (DIH) and 2-aminooxy-N-[3-(5-dimethylamino-naphtalene-1-sulfonamino)-propyl]-acetamide (dansylacetamidooxyamine, DNSAOA), was studied towards selected atmospheric carbonyl compounds. The results were compared to those obtained using the 2,4-dinitrophenylhydrazine (2,4-DNPH) UV–vis reagent, a standard well-established technique used to detect atmospheric carbonyl compounds. The experimental rate constant were integrated into a data-processing model developed in the laboratory to simulate the trapping efficiencies of a mist chamber device as a function of temperature, reagent and solvent type among others. The results showed that in an aqueous solution, DNSAOA exhibits a higher reactivity towards carbonyl compounds without the addition of an acidic catalyst than 2,4-DNPH. It was observed that DNSAOA can trap efficiently water-soluble gaseous compounds (for example formaldehyde). However, because of a high initial contamination of the reagent caused by the synthesis procedure used in this work, DNSAOA cannot be used in high concentrations. As a result, very low trapping efficiencies of less reactive water-insoluble gaseous compounds (acetone) using DNSAOA are observed. However, the use of an organic solvent such as acetonitrile improved the trapping efficiencies of the carbonyl compounds. In this case, using DIH as the derivatization reagent (DNSAOA is not soluble in acetonitrile), trapping efficiencies greater than 95% were obtained, similar to 2,4-DNPH. Moreover, fluorescence associated with DIH derivatives (detection limits 3.33 × 10⁻⁸ M and 1.72 × 10⁻⁸ M for formaldehyde and acetone, respectively) is further advantage of this method for the determination of carbonyl compounds in complex matrix compared to the classical UV–vis detection method (detection limits 3.20 × 10⁻⁸ M and 2.9 × 10⁻⁸ M for formaldehyde and acetone, respectively).     

Metrological estimation of sampling and sample preparation procedures as applied to analytical testing of technogenic origin raw material containing recoverable precious metal

 Different schemes of analytical testing including the sampling, sample preparation and sample analysis operations are considered as applied to a lot of raw material containing recoverable precious metal. The errors resulting from the step-by-step operations of the analytical testing are estimated. Sampling and sample preparation operations are found to be significant contributors to the total error of determination of the percentage and /or weight of a precious metal of interest in a lot. Some ways to diminish both the sampling error and the total error of the analytical testing procedure are recommended. Received: 28 December 1998 · Accepted: 22 February 1999     

Dependence on sampling rates of Radiello((R)) diffusion sampler for BTEX measurements with the concentration level and exposure time

Radiello^® diffusive samplers filled with a thermally desorbable adsorbent (graphitised charcoal Carbograph 4) have been tested for the monitoring of BTEX. The sampling rates have been estimated under various controlled atmospheres in order to evaluate the effects of two factors (exposure time, concentration levels and their interaction) on the performances of the Radiello^® sampler. Experiments have been carried out under various atmospheres in exposure chamber. A total of 174 Radiello^® samplers were exposed while varying two conditions: exposure time (1, 3, 7 and 14 days) and BTEX concentrations (low, medium and high levels). The results show that the sampling rates of benzene and toluene decrease for exposure of 14 days and especially for high concentration levels: decrease of 30% at 10 μg m⁻³ for benzene and 14% at 30 μg m⁻³ for toluene.

To try to explain the variations of these sampling rates, the breakthrough volumes (V_B) of BTEX on Carbograph 4 have been determined at different temperature and concentration conditions in order to evaluate the Langmuir parameters and their adsorption enthalpy (−ΔH_ads) using the Van’t Hoff equation. With regard to these adsorption characteristics, the dependence of sampling rates with concentration level and exposure time were analysed and discussed.     

Development of a highly sensitive method for determining atmospheric carbonyl compounds by passive sampling and application of the method to a survey of indoor air

A simple, highly sensitive analytical method for measuring many kinds of carbonyls in air using a passive sampler containing a sorbent (silica gel) coated with 2,4-dinitrophenylhydrazine has been developed. The carbonyls collected by the sampler were extracted with a solvent, and the extracts were subjected to high-performance liquid chromatography (HPLC; UV detection) without first being concentrated. In this method, the volume injection is examined, and is found to have a sensitivity at least 20 times that of ordinary HPLC methods. The air concentrations of nine carbonyls collected by passive sampling over a period of 24?h were estimated by means of conversion equations derived from the results of active sampling;c?=?^{10[log ( y} )^{??? b ] a} , where c is the carbonyl concentration in air (µg/m³); y is the amount of carbonyl collected by the passive sampler (µg); and a and b are constants for each carbonyl compound. The calculated air concentrations were consistent with the concentrations measured by active sampling. This method may be useful in determining personal exposure to ambient carbonyls.     

Rapid analysis of pyrethroids in whole urine by high-performance liquid chromatography using a monolithic column and off-line preconcentration in a restricted access material cartridge

A rapid high-performance liquid chromatography (HPLC) method using a monolithic column with UV detection at 238 nm was developed for the determination of fenpropathrin, betacyfluthrin, deltamethrin, and permethrin (cis and trans isomers) in whole urine. The method is based on the use of a monolithic chromatographic column and a restricted access material (RAM) cartridge for sample preparation. The mobile phase was water/acetonitrile (42:58 v/v), the flow rate was 3 mL min^–1, and chromatographic separation was carried out in 10 min. The separation of cis and trans isomers of permethrin was also possible under the above-mentioned conditions. Detection limits in reconstituted whole urine samples were between 0.9 g L^–1 for betacyfluthrin and 4.4 g L^–1 for fenpropathrin and trans-permethrin. Recoveries for urine samples spiked with different amounts of pyrethroids (between 19 g L^–1 and 75 g L^–1) were in the 70±6 to 90±7% range.     

A practitioner's approach to the assessment of the quality of sampling, sample preparation, and subsampling

 The methodology of evaluating the performance of sampling, sample preparation, and subsampling is reviewed. The requirements to be set for a successful experiment are revisited. The central role of the reference method is explained, and so is the choice of the parameters and the measurement methods. Based on the principles of the "Guide to the expression of uncertainty in measurement" (GUM), a statistical model is developed that demonstrates the influence of the experimental design on the outcome of the assessment experiment. This relationship is often overlooked in practice, as it is hardly mentioned in written standards dealing with this kind of quality assessments. The statistical framework thus developed covers the statistical procedures commonly appearing in written standards. Finally, the issue of testing the significance of the bias obtained from the experiment is discussed. Received: 14 June 1997 · Accepted: 2 September 1997     

Large volume sample stacking of cationic tetracycline antibiotics toward 10 ppb level analysis by capillary electrophoresis with UV detection

This paper aimed to build up a sensitive CE method for the analysis of tetracyclines (TCs) antibiotics (including tetracycline, chlorotetracycline, oxytetracycline, and doxycycline) with conventional UV detection. Here, the large volume sample stacking was applied to achieve in capillary preconcentration of the targets. To achieve large volume sample stacking, the essential step was a large volume of sample (around 83.3% of total capillary length from inlet to detection window) hydrodynamically loaded. Then, the reserved voltage was added in order to push the sample matrix out of the capillary. Due to different pH between sample solution (pH 4.6) and BGE (pH 11.0), the cationic TCs would turn into negatively charged while the sample matrix was removing from the capillary. Finally, the anionic TCs were stacked at the inlet for the subsequent separation. Although the loss of sample existed during their charge transformation, the LODs could be improved around 40 times than that obtained by normal hydrodynamic injection CE method. Here, the LODs were in the range of 8.1–14.5 μg/L, around 10 ppb that close to the level by electrochemiluminescence or laser‐induced fluorescence detection of TCs by CE. The precision was characterized by RSDs of migration times and peak areas, which were in the range of 0.19–0.24% and 0.97–2.54%, respectively. The recoveries of the developed method were in the range of 95–112% by spiking TCs in the tap water. The proposed inline preconcentration CE method could be a simple, speed, and sensitive method for the quantitative analysis of TCs.     

Voltammetric analysis of the acaricide amitraz and its degradant, 2,4-dimethylaniline

Amitraz is a formamide acaracide used in the control of ticks and mites in livestock. An electrochemical method for the determination of total amitraz residues and its final breakdown product, 2,4-dimethylaniline, is presented. Cyclic voltammetry at a glassy carbon electrode showed the irreversible oxidation of amitraz and of 2,4-dimethylaniline. A linear current response was obtained with an extrapolated limit of detection of 2 × 10⁻⁸ M for amitraz and 1 × 10⁻⁸ M for 2,4-dimethylaniline. The biological degradation of amitraz and subsequent formation of 2,4-dimethylaniline was readily monitored in spent cattle dip. Amitraz and 2,4-dimethylaniline was also monitored in milk and honey samples.     

磷酸催化合成2,4-二叔丁基苯酚的研究

研究了以磷酸为催化剂,苯酚和叔丁醇为原料合成2,4-二叔丁基苯酚。合成产物经过利用受阻酚的性质分离提纯,得到高纯度的2,4-二叔丁基苯酚,并考察了影响反应的因素。结果表明:酚醇摩尔比为1∶3,催化剂85%磷酸的用量为10m L,反应时间为5h,反应温度为60℃是最适宜的反应条件;产物收率达57.1%。     

Trends in the sample preparation and analysis of nanomaterials as environmental contaminants

Much research on the use of nanomaterials in different applications is being conducted in areas such as water treatment, catalysis, oil processing, medicine, food, sensors, energy storage, building materials, constructions, and others. Nanoparticles are ultra-small particles with exceptional properties, but some nanoparticles and nanomaterials may exhibit harmful properties when leaked into the environment. Due to the lack of analytical methods for the detection and analysis of nanoparticles in complex matrices, not much is known about the potential risks associated with nanomaterials. Therefore, more knowledge is needed of the sampling and analysis of nanomaterials (NMs) as environmental contaminants. This review is undertaken to identify and assess key characteristics in potential sampling and analysis methods for identifying and quantifying the occurrence of NMs in numerous types of environmental media. To select suitable sampling and analysis methods, information on NM sources and transformation in environmental media is essential and thus is also discussed. This provides more information about the negative impacts of NMs on the environment. Challenges and future perspectives on the determination of NMs are also discussed.     

Study of the size and numerical concentration of the free volume of carbon filled HDPE composites by the positron annihilation method

In this paper, the size and numerical concentration of free volume of high density polyethylene/carbon black (HDPE/CB) composite were investigated by positron annihilation lifetime spectroscopy (PALS). The PALS were measured in two series of samples, one with various CB contents in the composites and the other with changing the temperature of HDPE/CB composite containing 25 phr CB. It was found that the important parameters of PALS show their fluctuation around the percolation threshold. The conductivity of HDPE/CB is controlled by CB contribution, and that can be reflected in o-Ps lifetime. The temperature dependence of positron lifetimes reveals that the existence of glass transition temperatures and the size of free volume holes increases when temperature increases above glass transition. The results observed from the second set of samples suggest that positive temperature coefficient is in some way related with free volume expansion. The experiment facts implied that the conductivity of HDPE/CB was related with not only the size of free volume holes but also the number of free volume holes. The Doppler-broadening of HDPE/CB was also investigated.     

Simultaneous separation and analysis of camptothecin alkaloids in real samples by large‐volume sample stacking in capillary electrophoresis

Large‐volume sample stacking (LVSS) is commonly used as an effective online preconcentration method in capillary zone electrophoresis (CZE). In this paper, the method LVSS combined with CZE has been proposed to analyze camptothecin alkaloids. Optimum separation can be achieved in the following conditions: pH 9.0; 25mm borate buffer containing 20 mm sulfobutylether‐β‐cyclodextrin and 20 mm ionic liquid 1‐ethyl‐3‐methyllimidazole l ‐lactate; applied voltage 20 kV; and capillary temperature 25 °C. The LVSS was optimized as hydrodynamic injection 4 s at 5.0 psi and the polarity switching time was 0.17 min. Under the above conditions, the analytes could be separated completely in <20 min and the detector response was increased compared with conventional hydrodynamic injection. The limits of detection were between 0.20 and 0.78 μg/L. A good linearity was obtained with correlation coefficients from 0.9991 to 0.9997. The recoveries ranged from 97.72 to 103.2% and the results demonstrated excellent accuracy. In terms of the migration time and peak area, the experiment was reproducible. The experimental results indicated that baseline separation can be obtained and this method is suitable for the quantitative determination of camptothecin alkaloids in real samples.     

Development of new methods for the analysis of carboxylic acids and carbonyl compounds in size classified raindrops by CE for application in modelling atmospheric processes

Summary At the present time the formation processes of clouds and precipitation are not totally understood. Because cloud- and raindroplets are major sinks for chemical species in the atmosphere it is important to understand the physical and the chemical processes which occur during precipitation. The development of models is hindered by the scarcity of information about the scavenging of gases or aerosol particles by raindrops of different sizes. These processes can only be investigated by field experiments using microanalytical methods and analysing single raindrops as well as size-classified raindrop samples. Raindrops were collected according to their size by freezing them in liquid nitrogen (“Guttalgor” method). Sample volumes of the smallest raindrop sizes (radius <200μm) were usually smaller than 2 μL. The analysis of microvolumina in the size range of μL down to pL required the development of methods designed especially for this purpose. Analysis of rain samples was carried out by capillary electrophoresis. Organic acids were determined using a new electrolyte system for indirect detection. With this system it was possible to determine monocarboxylic acids (C₁−C₄) dicarboxylic acids (C₂−C₄, C₉) and inorganic anions (Cl⁻, NO₃ ⁻, SO₄ ²⁻) in the rain samples. Carbonyl compounds were analysed after derivatisation with dansylhydrazine using direct UV-detection. The system allows the identification of aliphatic carbonyl compounds (C₁−C₃, C₅) as well as benzaldehyde. It was found that carbonyl compounds and carboxylic acids showed concentration maxima at different raindrop radii. These concentration maxima are a consequence of particle scavenging. By using the results of a former experiment we concluded that the two species are located on different aerosol particle sizes. Reasons for the different particle sizes where these species are located are discussed. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996