Synthesis and characterization of sodium bis(trimethylstannyl) amide and bis(trimethylsilyl) bis(trimethylstannyl) -phospha-tetrazene

Sodium bis(trimethylstannyl)amide NaN(SnMe₃)₂, isolated by the reaction of trimethylstannyldiethylamine with sodium amide, reacts with tris(trimethylsilyl)hydrazino—dichloro-phosphine to form bis(trimethylsilyl)bis(trimethylstannyl)-2-phospha-2-tetrazene, (Me₃Si)₂N-N=P-N(SnMe₃)₂. Both the molecules have been isolated and characterized.     

Reversed phase partition chromatographic separation of antimony (III) with bis(2-ethylhexyl) phosphoric acid

A new method is proposed for the extractive Chromatographic separation of antimony. Antimony is extracted from 0.001–0.5M hydrochloric acid by a silica gel column coated with bis (2-ethylhexyl) phosphoric acid stripped with 2–8M hydrochloric, nitric or sulphuric acid, and determined spectrophotometrically at 555 nm as its complex with phenylfluorone. Antimony can thus be separated from a large number of elements, including iron, manganese, copper and thallium. Arsenic, antimony, bismuth and tin can be sequentially separated.     

Micropolarity of sodium bis(2-ethylhexyl) sulfosuccinate reverse micelles prepared in supercritical ethane and near-critical propane

The micropolarity of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) reverse micelles prepared in supercritical ethane and near-critical propane has been determined in terms of a solvent polarity parameter, E _T(30) values, by using absorption probes, 1-ethyl-4-methoxycarbonyl pyridinium iodide and 2,6-diphenyl-4-(2,4,6-triphenylpyridinio)-phenolate as a functions of pressure and the molar ratio of water to AOT, W ₀, at a constant temperature of 310 K. The micropolarity comparable to that of ethanol was observed for reverse micelles containing water of W ₀ = 2. The micropolarity increased with the water content and became independent of pressure after the system changed to a one-phase reverse micelle solution. For a given W ₀ value, no difference in the micropolarity was noticed in the micelles prepared in ethane and propane. Phase behaviour investigations have revealed that complete dissolution of 50 mM AOT occurred at 20 MPa in supercritical ethane, while a much lower pressure of 1 MPa was required in near-critical propane. The amount of water solubilized in reverse micelles formed in supercritical ethane was relatively low, reaching a W ₀ value of 7 at 36 MPa. In contrast, the amount of water solubilized in near-critical propane reverse micelles was W ₀ = 11 at a much lower pressure of 6 MPa. A higher pressure was required to solubilize larger amount of water in reverse micelles prepared in both ethane and propane. Received: 9 October 1998 Accepted in revised form: 12 February 1999     

新型C2对称的手性双(亚)唑啉化合物的合成

手性双噁唑啉化合物因其在不对称合成领域的广泛应用,而成为有机合成的一个研究热点。具有C2对称的手性双噁唑啉化合物因其在不对称合成反应中表现出较好的对映选择活性而倍受关注,其合成方法有由羧基转化为噁唑啉基;     

对苯二甲酸单异辛酯的合成

以对苯二甲酸、氯化亚砜、异辛醇为原料，经过酰化、酯化两步合成了对苯二甲酸单异辛酯，收率40．4％,纯度99．0％。     

二-(2-乙基己基)磷酸/正辛醇反胶束萃取L-辛弗林

利用二-(2-乙基己基)磷酸(P204)/正辛醇反胶束从枳实粗提物中萃取L-辛弗林。 研究了萃取机理和水相pH值、含水量W0、阳离子浓度、萃取时间以及P204浓度对L-辛弗林萃取率的影响。 通过原子力显微镜观察了P204/正辛醇反胶束;萃取L-辛弗林的最佳条件为：萃取原料液水相pH=6.5,含水量W0=15、P204浓度为0.08 mol/L,在此条件下萃取15 min,对L-辛弗林的单次萃取率为68.0%。 基于萃取率建立的数学模型可反映pH值、P204浓度与萃取率的关系,在一定pH值及P204浓度区间可预测萃取率的变化趋势。     

Synthesis of novel bis(chromenes) and bis(chromeno[3,4-C]pyridine) incorporating piperazine moiety

Novel bis(2-oxo-2H-chromene) as well as bis(2-imino-2H-chromene) derivatives incorporating piperazine moiety were prepared by the cyclocondensation reaction of bis(2-hydroxybenzaldehyde) with two equivalents of each of the appropriate β-ketoesters or acetonitrile derivatives. The bis(2-imino-2H-chromene-3-carbothioamide) derivative was used as a key synthon for construction of novel bis(3-(4-substituted thiazol-2-yl)-2H-chromen-2-one) derivatives via its cyclocondensation with a series of the appropriate α-halocarbonyl derivatives. Moreover, the bis(2-hydroxybenzaldehyde) reacted with four equivalents of the appropriate acetonitrile derivatives to afford the corresponding bis(3H-chromeno[3,4-c]pyridine) derivatives. Elucidation of the structure of the novel bis(chromenes) bearing piperazine nucleus was established by the spectral data and elemental analyses.     

Characterization and application of sodium di(2-ethylhexyl) sulfosuccinate and sodium di(2-ethylhexyl) phosphate surfactants as pseudostationary phases in micellar electrokinetic chromatography

Sodium di(2-ethylhexyl) sulfosuccinate (DOSS) and sodium di(2-ethylhexyl) phosphate (NaDEHP) surfactants, with double alkyl chains and negatively charged headgroups, were characterized using fluorescence quenching, densitometry, and tensiometry techniques to determine their aggregation number, partial specific volume, and critical aggregation concentration. These two surfactants were then applied as pseudostationary phases in micellar electrokinetic chromatography (MEKC) for separations of alkyl phenyl ketones. The aggregation number of NaDEHP was found to be more than two-fold higher than that of DOSS. The partial specific volumes of NaDEHP and DOSS were found to be 0.9003 and 0.8371 mL/g, respectively. The critical aggregation concentrations are 5.12 and 1.80 mM for NaDEHP and DOSS, respectively. The DOSS surfactant provided a wider separation window and had a greater hydrophobic environment than the NaDEHP surfactant under the MEKC experimental conditions studied.     

Desulfurization and transformation of isothiocyanates to cyanamides by using sodium bis(trimethylsilyl)amide

Sodium bis(trimethylsilyl)amide was first used as the desulfurizing agent for the conversion of isothiocyanates to cyanamides in a ‘one-flask’ reaction.     

Synthesis of bis(2-cyanoacrylates) from 2-cyanoacryloyl chloride and 2-butene- and 2-butyne-1,4-diols

The interaction of 2-cyanoacryloyl chloride with unsaturated 1,4-diols leads to bis(2-cyanoacrylates) with a double or triple C-C bond.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 779–780, April, 1995.     

A novel synthesis of polyethers with pendant hydroxyl groups by polyaddition of bis(oxetane)s with bis(phenol)s

The polyaddition of 1,4-bis[(3-ethyl-3-oxetanyl)methoxymethyl]benzene (BEOB) with 3,3′,5,5′-tetrachlorobisphenol A (TCBPA) was examined with or without catalysts. High molecular weight polymer (polymers 1) (M_n = 13,600) with pendant primary hydroxyl groups was obtained in a 99% yield without any gel products when the reaction was performed with 5 mol % of tetraphenylphosphonium bromide as a catalyst in NMP at 160°C for 96 h. However, when the reaction was carried out without a catalyst under the same conditions, a low molecular weight polymer (M_n = 3200) was obtained in a 51% yield. The structure of the resulting polymer was confirmed by IR, ¹H-NMR, and ¹³C-NMR spectra. In this reaction system, it was also found that tetraphenylphosphonium iodide and crown ether complexes such as 18-crown-6 (18-C-6)/KBr and 18-C-6/KI have high catalytic activity. Polyadditions of 1,4-bis[(3-methyl-3-oxetanyl)methoxymethyl]benzene with TCBPA and BEOB with 3,3′,5,5′-tetrabromobisphenol-S were also examined, and corresponding polymers (polymers 2 and 3) were obtained in good yields. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2781–2790, 1999     

Structure and Photosynthetic Mimicking of Bis（2,6—bis（benzimidazol—2—yl）pyridine）manganese（Ⅱ）

Mn(bzimpy)2(1)[bzimpy=2,6-bis(benzimidazol-2-yl)pyridine],a mononuclear manganese(Ⅱ）complex,was synthesized by the reaction of Mn(OOCMe)2 with bzimpy in absolute ethanol.The complex was structurally characterized by elemental analysis,cyclic voltammetry,and X-ray crystallography.In the complex,the manganese-nitrogen distances were different,and the geometry and the metal ion environment showed the distortion.The cyclic voltammetric measurements have been performed to assess its redox characteristics.The presence of oxidation wave at 0.62V and 0.081V vs.SCE or 0.8V and 1.0v vs.NHE suggested that this complex could catalyze the oxidation of water,therefore,simulate the water-oxidizing complex(WOC) of photosystem Ⅱ (PS Ⅱ).The measurements of photoreduction of 2,6-dichlorophenolindophenol (DCPIP),and oxygen evolution in the manganess-depleted and the comples 1-reconstituted PS Ⅱ preparations just support our conjecture.     

A novel synthesis of reactive polymers with pendant halomethyl groups by the polyaddition reaction of bis(epoxide)s with bis(chloroacetoxy)esters or bis(bromoacetoxy)esters

New reactive polymers with pendant halomethyl groups were successfully synthesized by polyaddition reactions of bis(epoxide)s with bis(chloroacetoxy)ester such as 1,4-bis [(chloroacetoxy)methyl]benzene (BCAMB) or 1,4-bis[(bromoacetoxy)methyl]benzene (BBAMB) using quaternary onium salts or crown ether complexes as catalysts. The polyaddition reaction of diglycidyl ether of bisphenol A (DGEBA) with BCAMB proceeded very smoothly with high yields (83–96%) by the addition of quaternary onium salts such as tetrabutylphosphonium bromide (TBPB) or crown ether complexes such as 18-crown-6/KBr as catalysts to produce high molecular weight polymers, although the reaction occurred without any catalyst to give low molecular weight polymer in low yield at 90°C for 48 h. It was also found that the reaction proceeded smoothly in aprotic polar solvents such as N-methyl-2-pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc) to produce high molecular weight polymers. Polyaddition reactions of DGEBA or digylcidyl ether of ethylene glycol (DGEEG) with BBAMB, other bis(chloroacetoxy)esters or bis(bromoacetoxy)esters using TBPB in DMAc also proceeded smoothly to give the corresponding polymers. The resulting poly(ether-ester)s contain reactive halomethyl groups as side chains, which were introduced during main chain formation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3791–3799, 1997     

Chromium(III) ion selective electrode based on glyoxal bis(2-hydroxyanil)

A poly(vinyl chloride) membrane based on glyoxal bis(2-hydroxyanil) as membrane carrier was prepared and investigated as a Cr(III)-selective electrode. The electrode has a linear dynamic range of 3.0×10⁻⁶-1.0×10⁻² mol l⁻¹, with a Nernstian slope of 19.8±0.5 mV per decade and a detection limit of 6.3×10⁻⁷ mol l⁻¹. It has a fast response time of <20 s and can be used for at least 3 months without any considerable divergence in potential. The proposed electrode revealed good sensitivities for Cr(III) over a wide variety of metal ions and could be used in a pH range of 2.7-6.5. Above all, the membrane sensor has been used very successfully for the analysis of some food materials and alloys for the determination of Cr(III) ion.     

Uncatalyzed,One-pot Synthesis of 3,3'-(Benzylene)bis(4-hydroxy-2H-chromen-2-one)Derivatives under Thermal Solvent-free Conditions

A series of 3,3′‐(benzylene)bis(4‐hydroxy‐2H‐chromen‐2‐one) derivatives have been synthesized from condensation reactions of 4‐hydroxycoumarin with benzaldehydes under thermal solvent‐free conditions. This environmentally friendly synthesis is uncatalyzed and affords the desired products in excellent yields.     

Crystallographic report: Bis(acetato‐O,O′){4‐[N,N‐bis(2‐cyanoethyl)amino] pyridine}bis(methanol)cadmium(II), [Cd(C11H12N4) (CH3CO2)2(CH3OH)2]

The cadmium atom is coordinated in distorted pentagonal bipyramidal geometry by the pyridine‐nitrogen atom of the 4‐[N,N‐bis(2‐cyanoethyl)amino]pyridine ligand, two oxygen atoms of two methanol molecules and four oxygen atoms of two acetate groups. Copyright © 2005 John Wiley & Sons, Ltd.     

Poly(2‐oxazoline) hydrogels crosslinked with aliphatic bis(2‐oxazoline)s: Properties,cytotoxicity, and cell cultivation

A series of hydrogels from 2‐ethyl‐2‐oxazoline and three bis(2‐oxazoline) crosslinkers—1,4‐butylene‐2,2′‐bis(2‐oxazoline), 1,6‐hexamethylene‐2,2′‐bis(2‐oxazoline), and 1,8‐octamethylene‐2,2′‐bis(2‐oxazoline)—are prepared. The hydrogels differ by the length of aliphatic chain of crosslinker and by the percentage of crosslinker (2–10%). The influence of the type and the percentage of the crosslinker on swelling properties, mechanical properties, and state of water is studied. The equilibrium swelling degree in water ranges from 2 to 20. With a proper selection of the crosslinker, Young's modulus can be varied from 10 kPa to almost 100 kPa. To evaluate the potential for medical applications, the cytotoxicity of extracts and the contact toxicity toward murine fibroblasts are measured. The hydrogels with the crosslinker containing a shorter aliphatic exhibit low toxicity toward fibroblast cells. Moreover, the viability and the proliferation of pancreatic β‐cells incubated inside hydrogels for 12 days are analyzed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1548–1559     

Kinetics of the polycondensation and copolycondensation of bis(3‐hydroxypropyl) terephthalate and bis(4‐hydroxybutyl) terephthalate

The kinetics of the polycondensation and copolycondensation reactions of bis(3‐hydroxypropyl) terephthalate (BHPT) and bis(4‐hydroxybutyl) terephthalate (BHBT) as monomers were investigated at 270 °C in the presence of titanium tetrabutoxide as a catalyst. BHPT was prepared by the ester interchange reaction of dimethyl terephthalate and 1,3‐propanediol (1,3‐PD). Through the same method adopted for BHPT synthesis, BHBT was prepared with 1,4‐butanediol instead of 1,3‐PD. With second‐order kinetics applied for polycondensation, the rate constants of the polycondensation of BHPT and BHBT, k₁₁ and k₂₂, were calculated to be 4.08 and 4.18 min^?1, respectively. The rate constants of the cross reactions in the copolycondensation of BHPT and BHBT, k₁₂ and k₂₁, were calculated with results obtained from proton nuclear magnetic resonance spectroscopy analysis. The rate constants during the copolycondensation of BHPT and BHBT at 270 °C decreased in the order k₁₂ > k₂₂ > k₁₁ > k₂₁, indicating that the reactivity of BHBT was larger than that of BHPT at 270 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2435–2441, 2002     

Crystallographic report: Diazido[bis(2‐pyridyl)amine]zinc(II) hydrate, [Zn(C10H9N3)2(N3)2]·H2O

In mononuclear [Zn(C₁₀H₉N₃)₂(N₃)₂]·H₂O, the zinc atom has an approximate octahedral geometry, coordinated with four pyridyl nitrogen atoms derived from two bis(2‐pyridyl)amine molecules and two terminal nitrogen donors of the azide anions. Hydrogen‐bonding interactions extend this structure to form a double‐layer architecture. Copyright © 2004 John Wiley & Sons, Ltd.