Catalytic cyclopropanation of spiro[2.4]hepta-4,6-diene with diazomethane

Catalytic cyclopropanation of spiro[2.4]hepta-4,6-diene with diazomethane in the presence of copper or palladium compounds results in mono- and dicyclopropanation products, namely, spiro[bicyclo[3.1.0]hex-3-ene-2,1′-cyclopropane] and spiro[cyclopropane-1,5′-tricyclo[4.1.0.0^2,4]heptane], with different efficiency. The use of Pd compounds as catalysts allows the cyclopropanation to be performed under conditions of simultaneous generation and decomposition of diazomethane.     

Ambiguousness of GC-MS identification of spiro[2.4]hepta-4,6-diene in natural objects

The publications on the GC-MS identification of spiro[2.4]hepta-4,6-diene in various natural objects were critically considered. Significant similarity of the mass spectra and coincidence of the GC retention indices on standard nonpolar phases of spiro[2.4]hepta-4,6-diene (761±3) and its isomer (toluene, 760±8) do not allow one to assert that the spirocyclic hydrocarbon was found in all the cases. Additional analytical parameters should be applied to differentiate such isomers.     

An ab initio molecular orbital study of structures and energies of spirocompounds: spiro[3.3]heptane and spiro[3.3]hepta-1,5-diene

Ab initio molecular orbital theory with the STO-3G and 4-31G basis sets is used to determine the equilibrium geometries, enthalpies of formation, strain energies and spiro-interactions for spiro[3.3]heptane and spiro[3.3]hepta -1,5 - diene. For spiro[3.3]heptane, molecular mechanics calculations suggest that the component cyclobutane rings are puckered to a greater extent than in cyclobutane itself. For spiro[3.3]hepta - 1,5 - diene, STO-3G calculations predict that the component cyclobutene rings deviate slightly from an orthogonal arrangement. Spiro-interactions in spiro[3.3]hepta - 1,5 - diene are revealed by comparing the calculated structural parameters and strain energies with those of appropriate reference systems. The π-orbitals in spiro[3.3]hepta -1,5 -diene are predicted to be split by about 0.4 eV.     

Theoretical study on the optical activity of spiro[3.3]hepta-1,5-diene

The spectroscopic and chiroptical properties of the title compound 1 has been predicted and interpreted by a quantum mechanical approach using the CNDO-CI modification of Del Bene and Jaffé. The calculated rotational strength of the longest wavelength transitions according to the method of Hug and Wagnière suggests left-handed chirality for levorotatory 1. The assignment is in agreement with previous work. In addition, the same computational method has been employed for spiro[4.4]nona-1,6-diene (2) and spiro[4.4]nonatetraene (3).     

The formation of tetracyclo[7.2.1.02,5.02,8]dodeca-6,10-dienes under conditions of thermal isomerization of spiro[2.4]hepta-4,6-diene into bicyclo[3.2.0]hepta-1,3-diene

The formation of the novel hydrocarbons, tetracyclo[7.2.1.0^2,5.0^2,8]dodecadienes, as a result of thermal isomerization of spiro[2.4]hepta-4,6-diene into bicyclo[3.2.0]hepta-1,3-diene and its capture by 1,3-dienes is demonstrated. The conditions of thermal isomerization and dimerization of the spiroheptadiene are studied. Cyclopropanation of the polycyclic dienes formed by diazomethane in the presence of Pd-catalysts was accomplished, and occured solely through the norbornene double bond.For preliminary communication see ref.¹ Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 132–137, January, 1993.     

Lewis acid catalyzed Povarov reaction of pentafulvenes and spiro[2,4]-hepta-[4,6]-diene: An efficient access to cyclopentene fused quinolines

An efficient protocol for the Lewis acid catalyzed three-component aza-Diels-Alder reaction of pentafulvenes as dienophile has been developed. Cyclopentene fused tetrahydroquinolines were formed in good yields with excellent diastereoselectivities. The method was extended to spiro[2,4]hepta-4,6-diene, by which 3,4-dihydroquinoline derivatives were obtained. The aromatization of cycloadducts furnished corresponding quinoline derivatives.     

Studies on polymers from cyclic dienes. XII. Cationic polymerization of spiro[2,4]hepta-4,6-diene

Polymerizations of spiro[2,4]hepta-4,6-diene were carried out with cationic initiators and Ziegler-type catalysts. This monomer polymerized very rapidly with a variety of cationic initiators, and low monomer and initiator concentrations had to be employed in order to avoid formation of crosslinked polymers. The polymer contained 1,2 and 1,4 addition units, and there was no indication of the opening of the cyclopropyl ring in the monomer unit. The following relationship was obtained: [η] = 4.5 × 10^?8M?_n^1.71. The exponential coefficient of this equation is much greater than those typical of vinyl polymers, suggesting that the polymer chain is very stiff. The polymer showed much enhanced resistance to autoxidation as compared with polycyclopentadiene, and its softening point was above 200°C. These interesting physical and chemical properties of the monomer and the polymer can be associated with their spiro structures.     

Thermal rearrangements of spiro[2.4]hepta-1,4,6-trienes

Thermolysis of spiro[2.4]hepta-1,4,6-triene (1a) at 50 degrees C yielded bicyclo[3.2.0]hepta-1,3,6-triene (5), which dimerized in two different fashions to form cyclobutanes. The 1,2-dimethyl and 1-propyl derivatives of 1a also rearranged at 50 degrees C, but at a faster rate, each yielding a pair of cyclobutane dimers. The structures of these symmetrical dimers were investigated by 1D and 2D NMR and NOE difference spectroscopy. Ab initio calculations indicated that the two strained olefins 1a and 5 had comparable energies about 50 kcal/mol lower than norborna-1(7),2,5-triene, which was thus excluded as a reaction intermediate.     

Bicyclic allenes : Generation and trapping of 6,7-benzobicyclo [3.2.1] octa-2,3-diene

Treatment of 3-bromo-6,7-benzobicyclo [3.2.1] octa-2,3-diene (9) with potassium tert.-butoxide produces the strained bicyclic allene (10) which is trapped by 1,3-diphenylbenzo[c]furan (DBI) to give five isomeric cycloadducts. In the absence of DBI, allene (10) gave rise to enol ether (18) by addition of tert.-butanol.     

Dzhemilev reaction for the synthesis of spiro[3.3]heptane and spiro[3.4]octanes

For the first time cycloalumination of methylenecyclobutane with the aid of Et₃Al in the presence of Cp₂ZrCl₂ leading to 6-ethyl-6-aluminaspiro[3.4]octane has been realized. The latter, without isolation, was converted into spiro[3.3]heptane, 6-thiaspiro[3.4]octane and also spiro[3.4]octan-6-ol and 6-spiro[3.4]octyl formate with high yields and selectivity.     

Addition initiated ring closure substituted spiro[4,2]Hepta-1,3-dienes via fulvene intermediates

The reactivity of the epoxy-fulvene 1 with various nucleophiles has been examined. It is a versatile Intermediate for the preparation of spiro[4.2]hepta-1,3-diene synthons via nucleophilic addition to the C₆ position followed by intramolecular cyclization of the substituted cyclopentadiene anion generated in situ.     

Grindstone chemistry: one-pot synthesis of spiro[diindenopyridine-indoline]triones and spiro[acenaphthylene-diindenopyridine]triones

A one-pot, pseudo four-component, and simple synthesis of spiro[diindenopyridine-indoline]triones and spiro[acenaphthylene-diindenopyridine]triones via the reaction of 1,3-indandione, aromatic amines and isatins or acenaphthylene-1,2-dione using a ‘Grindstone Chemistry’ method is reported.     

Diels-Alder Reactions of [2.2] Paracyclophan-1-ene and [2.2] Paracyclophane-1,9-diene with 3,6-Disubstituted 1,2,4,5-Tetrazines

[2.2] Paracyclophan-1-ene ( 1 ) and [2.2] paracyclophane-1,9-diene ( 6 ) apparently act as dienophiles with inverse electron demand and smoothly react with dimethyl 1,2,4,5-tetrazine-3,6-dicarboxylate ( 2a ) at room temperature forming dihydropyridazine adducts, which are dehydrogenated to the pyridazino-anellated [2.2] paracyclophanes 5a and 8a , respectively. The molecular structure of 5a is determined by X-ray crystal-structure analysis. Under more rigorous conditions, phenyl-substituted derivatives 5b and 8b are obtained from 1 and 6 , respectively, with 3,6-diphenyl-1,2,4,5-tetrazine. Compounds 1 and 6 are less reactive dienophiles than other strained cyclic olefins as shown by kinetic measurements.     

Convenient synthesis of spiro[indoline-3,4'-pyrano[2,3-c]pyrazole] and spiro[acenaphthyl-3,4'-pyrano[2,3-c]pyrazoles] via fourcomponent reaction

The base promoted four-component reaction of hydrated hydrazine, dimethyl acetylenedicarboxylate, isatines and malononitrile (ethyl cycanoacetate) in ethanol afforded polysubstituted spiro[indoline-3,4‘-pyrano[2,3-c]pyrazoles] and spiro[acenaphthyl-3,4-pyrano[2,3-c]pyrazoles]     

Synthesis and Crystal Structure of 2-(Diphenylphosphine oxide)-3-(diphenylphosphine oxide ethynyl) spiro [bicyclo[2.2.1]hepta-2,5-diene-7,1''''-cyclopropane]

1 INTRODUCTION Organic phosphine compounds always attract great interest for their unique properties and extensive uses in biochemistry, pesticide chemistry and synthetic organic chemistry. In the last two decades, much attention has been paid to phosphorus-containing olefin and acetylenic compounds for their applications in transition metal chemistry, asymmetric catalysis and photorearrang- ement [1~7 ]. Previously, we have reported the crystal structure of a novel host compound which …     

Molecular characterization and glassy-state properties of poly(spiro[2,4]hepta-4,6-diene)

Poly(spiro[2,4]hepta-4,6-diene) (PSHD) is a random copolymer composed of 1,2 and 1,4 units. Although PSHD has been reported to have a very large Sakurada–Mark–Houwink exponent (a = 1.71) characteristic of rigid rods, a new determination of the intrinsic viscosity–molecular-weight relation for fractionated samples with known copolymer composition gives a smaller value (0.81). The rigidity of the PSHD molecule was also investigated by calculations of the conformational energy associated with the main chain and the dynamic viscoelasticity associated with the molecular motion in a solid state. A sharp potential energy minimum occurs at a dihedral angle χ₁ = 260° in polymer composed of all trans 1,4 units. The dynamic loss tangent for the primary absorption decreases with increasing fraction of the 1,4 unit. These properties result from the characteristics of the stiff 1,4 unit sequences in the molecular chain. The density of PSHD decreases with increasing content of 1,4 units and was found to be considerably smaller than values for typical polymers, in relation to the occupied volume of the repeat unit. This fact can be explained by the peculiar aggregation state of molecular chains composed of rigid and flexible units.     

Photochemical isomerization of 1,2,5-trisilabicyclo[3.2.0]hepta-3,6-diene to 1,4,7-trisilabicyclo[2.2.1]hepta-2,5-diene

Upon irradiation of a benzene-d6 solution of 1,2,2,5-tetrakis[di-tert-butyl(methyl)silyl]-4,7-diaryl- 1,2,5-trisilabicyclo-[3.2.0]hepta-3,6-diene [1a: aryl = phenyl, b: aryl = 3,5-bis-(trimethylsilyl)phenyl], 1,4,7,7-tetrakis[di-tert-butyl-(methyl)silyl]-2,5-diaryl-1,4,7- trisilabicyclo[2.2.1]hepta-2,5-diene (2a,b) was formed via skeletal rearrangement.     

Synthesis of spiro[benzopyrazolonaphthyridine-indoline]-diones and spiro[chromenopyrazolopyridine-indoline]-diones by one-pot, three-component methods in water

The synthesis of spiro[benzo[h]pyrazolo[3,4-b][1,6]naphthyridine-7,3′-indoline]-2′,6(5H)-diones and spiro[chromeno[4,3-b]pyrazolo[4,3-e]pyridine-7,3′-indoline]-2′,6(6aH,10H)-diones via a one-pot, three-component reaction of 4-hydroxycoumarin or 4-hydroxy-1-methylquinolin-2(1H)-one, isatins and 1H-pyrazol-5-amines in water is reported.     

Pd-catalyzed intramolecular amidation of 2-(buta-1,3-dienyl)phenylcarbamoyl chloride: a concise synthesis of spiro[indoline-3,3′-pyrrolidine]

A palladium-catalyzed intramolecular amidation of arylcarbamic acid derivatives bearing 1,3-diene moiety with or without external nucleophiles is described. The tandem cycloamidation and nucleophilic allylic substitution are successfully applied to the construction of the spiro[indoline-3,3′-pyrrolidine] skeleton as well as contiguous stereogenic centers with an aim of synthesizing spirocyclic oxindole alkaloids.     

Synthese der enantiomeren 1,6-Spiro[4.4]nonadiene

Two new syntheses of spiro[4.4]nonane-1, 6-dione (I) are described: one by rearrangement of 1,6-epoxy-bicyclo[4.3.0]-nonane-2-one (IV) with boron trifluoride, the other by an acid catalyzed, intramolecular Claisen condensation of 4-(2-oxocyclopentyl)-butyric acid. Spiro[4.4]-nonane-1,6-dione is converted into trans, trans-spiro[4.4]nonane-1,6-diol which is resolved into enantiomers via the diastereomeric esters with (?)-camphanic acid. (+)-(5S)-Spiro[4.4]nona-1,6-diene (III) is prepared from (1R, 6R)-trans,trans-spiro[4.4]nonane-1,6-diol (II) by pyrolysis of the corresponding bis-4-methylphenyl-thionocarbonate. This modification of the Chugaev reaction is particularly useful with sterically hindered alcohols which cannot be converted into S-me-thylxanthates. The circular dichroism, UV.- and NMR.-spectrum of optically active spiro[4.4]-nonane-1,6-diene are discussed.