Complexing properties of polyhexamethyleneguanidine chemically grafted to a silica surface

Covalent bonding of polyhexamethyleneguanidine amides of maleic and o-phthalic acids to the aminated silica surface was performed. The complexing properties of the obtained composite adsorbents with respect to Zn(II), Cu(II), Fe(III), Co(II), Pb(II), Ni(II), Mn(II), Mo(VI), and Cr(VI) ions were studied. The Mo(VI) and Cr(VI) reduction was detected on the modified silica surface bearing polyhexamethyleneguanidine amide with o-phthalic acid. The formation of different-ligand complexes with transition metal cations adsorbed on the synthesized composite surface was studied.     

Effects of transition metal ion coordination on the collision-induced dissociation of polyalanines

Transition metal-polyalanine complexes were analyzed in a high-capacity quadrupole ion trap after electrospray ionization. Polyalanines have no polar amino acid side chains to coordinate metal ions, thus allowing the effects metal ion interaction with the peptide backbone to be explored. Positive mode mass spectra produced from peptides mixed with salts of the first row transition metals Cr(III), Fe(II), Fe(III), Co(II), Ni(II), Cu(I), and Cu(II) yield singly and doubly charged metallated ions. These precursor ions undergo collision-induced dissociation (CID) to give almost exclusively metallated N-terminal product ions whose types and relative abundances depend on the identity of the transition metal. For example, Cr(III)-cationized peptides yield CID spectra that are complex and have several neutral losses, whereas Fe(III)-cationized peptides dissociate to give intense non-metallated products. The addition of Cu(II) shows the most promise for sequencing. Spectra obtained from the CID of singly and doubly charged Cu-heptaalanine ions, [M + Cu - H](+) and [M + Cu](2+) , are complimentary and together provide cleavage at every residue and no neutral losses. (This contrasts with [M + H](+) of heptaalanine, where CID does not provide backbone ions to sequence the first three residues.) Transition metal cationization produces abundant metallated a-ions by CID, unlike protonated peptides that produce primarily b- and y-ions. The prominence of metallated a-ions is interesting because they do not always form from b-ions. Tandem mass spectrometry on metallated (Met = metal) a- and b-ions indicate that [b(n) + Met - H](2+) lose CO to form [a(n) + Met - H](2+), mimicking protonated structures. In contrast, [a(n) + Met - H](2+) eliminate an amino acid residue to form [a(n-1) + Met - H](2+), which may be useful in sequencing.     

Thermal and spectral studies on complexes derived from tetradentate Schiff bases

Several new complexes of Schiff bases ligands H₄La and H₄Lb with transition metal ions such as Cr(III), Fe(III), Co(II) and Zn(II) are synthesized. Elemental analysis, infrared, UV–Vis and thermal analysis, as well as conductivity and magnetic susceptibility measurements are used to elucidate the structure of the newly prepared metal complexes. A square planar geometry is suggested for Zn(II) complexes, while an octahedral geometry suggested for the Cr(III), Fe(III) and Co(II) complexes. The thermal decomposition of complexes was found to be first order reaction and the thermodynamic parameters corresponding to the different decomposition steps were reported.     

Preparation and analytical properties of a chelating resin functionalized with 1-hydrazinophthalazine ligand

A poly[styrene-co-(divinylbenzene)] resin (XAD-4) functionalized with 1-hydrazinophthalazine ligand has been prepared and its analytical properties investigated. The pH dependence of sorption of metal ion on the resin has been determined for Cu(II), Ni(II), Co(II), Zn(II), Cd(II), Pb(II), Fe(III) and Cr(III). Trace amounts of these metal ions were quantitatively retained on the resin and recovered by eluting with 1 mol l(-1) hydrochloric acid. The resin was found to be selective for Fe(III) and its separation from other metal ions was carried out effectively. Metal ions concentrations were determined using AAS.     

Potential of ethylenediaminedi(o-hydroxyphenylacetic acid) and N,N'-bis(hydroxybenzyl)ethylenediamine-N,N'-diacetic acid for the determination of metal ions by capillary electrophoresis

Two aromatic polyaminocarboxylate ligands, ethylenediaminedi(o-hydroxyphenylacetic acid) (EDDHA) and N,N′-bis(hydroxybenzyl)ethylenediamine-N,N′-diacetic acid (HBED), were applied for the separation of transition and heavy metal ions by the ion-exchange variant of electrokinetic chromatography. EDDHA structure contains two chiral carbon centers. It makes it impossible to use the commercially available ligand. All the studied metal ions showed two peaks, which correspond to meso and rac forms of the ligand. The separation of metal–HBED chelates was performed using poly(diallyldimethylammonium) polycations in mixed acetate–hydroxide form. Simultaneous separation of nine single- and nine double-charged HBED chelates, including In(III), Ga(III), Co(II)–(III) and Mn(II)–(III) pairs demonstrated the efficiency of 40 000–400 000 theoretical plates. The separation of Co(III), Fe(III) complexes with different arrangements of donor groups and oxidation of Co(II), Mn(II), Fe(II) ions in reaction with HBED have been discussed.     

Calorimetric and Thermal Investigation of Metal Derivatives of 6-aminopicolinic Acid

The comparison of thermal and calorimetric properties of metal derivatives of 6-aminopicolinic acid (APH) is presented. The salts and complexes of APH with Cr(III), Cd(II), Cu(II), Ni(II), Pb(II), Co(II)and Ag(I) have been studied by TG-DTA and DSC methods up to 1200°C in a nitrogen atmosphere. Decomposition processes are proposed. The decarboxylation, deamination and carbonation of the organic fragments of molecules take place. The compounds decompose to metal or to metal oxides. The values of the transition enthalpy were determinated. This revised version was published online in August 2006 with corrections to the Cover Date.     

Adsorption behavior of metal ions onto a bovine serum albumin (BSA) membrane monitored by means of an electrode-separated piezoelectric quartz crystal.

The interaction between metal ions and bovine serum albumin (BSA) was studied by using a piezoelectric quartz crystal (PQC) arranged in the electrode-separated configuration. A silanized surface of the PQC was coated with a BSA membrane via a coupling reaction with glutaraldehyde. The frequency shifts obtained from PQC coated with a BSA membrane suggested that various kinds of metal ions could be adsorbed onto the BSA membrane from aqueous solutions containing a low concentration of metal ions (2 or 10 micromol dm(-3)), only when the BSA was denatured with an alkaline solution. Anionic species of Pt(IV) and Au(III) were adsorbed onto the denatured BSA membrane from an acetic acid solution at pH 2.2, and cationic species of Cd(II), Zn(II), Co(II), Ni(II), Cu(II), and Ag(I), and cations, such as Ca2+, Ba2+, and Mg2+, were adsorbed from ammonia buffer at pH 9.5, whereas Al(III), Cr(III), Fe(III), Hg(II), and Pb(II) were hardly adsorbed. The adsorption mechanisms of these metal ions are discussed, based on the electrostatic interaction between the metal ions and the denatured BSA membrane, and complex formation between the metal ions and amino acid residues of the denatured BSA. Further, the PQC coated with a denatured BSA membrane was applied to the determination of Pt and Cd, using large frequency shifts for Pt(IV) and Cd(II).     

Tuning the selectivity of two chemosensors to Fe(III) and Cr(III)

Two rhodamine-based chemosensors (1 and 2) were designed, and their sensing behavior toward metal ions was investigated by fluorescence spectroscopies. 1 and 2 achieved tuning the selectivity to Fe(III) and Cr(III) in 100% aqueous solution, whereas other ions including Cd(II), Co(II), Cu(II), Ni(II), Zn(II), Mg(II), Ba(II), Pb(II), Na(I), and K(I) induced basically no spectral change, which constituted a Fe(III)-selective and a Cr(III)-selective fluorescent chemosensor, respectively.     

Use of Di(n-butyl) and Di(iso-butyl)dithiophosphoric Acids as Complexing Agents in the TLC Separation of Some d and f Transition Metal Ions

The thin layer chromatographic behavior of U(VI), Th(IV), lanthanides(III), Co(II), Ni(II), and Cu(II) on silica gel H with di(n-butyl) and di(iso-butyl)dithiophosphoric acids as complexing agents in the organic mobile phase has been investigated. The results obtained show that the dithiophosphate anion has a substantial effect on the migration of these metal ions. The presence of electron-donor solvents in the mobile phase increases retention, especially for U(VI), Th(IV), and lanthanides(III). The effect is explained on the basis of greater solubility of the metal chelates of the dithiophosphoric anions in the organic mobile phase, because of a solvation process. Separation was investigated for three groups of metal ions — actinides, lanthanides, and d transition metals. By choice of an appropriate organic mobile phase, separation of the pairs Th(IV)-U(VI), Pr(III)-Sm(III), Sm(III)-Gd(III), and Gd(III)-Er(III) was achieved, as was separation of Co(II), Ni(II), and Cu(II) from each other. A complex separation mechanism based on adsorption-desorption, cation exchange, and extraction is suggested.

     

Preconcentration/Separation of Some Metal Ions Using Sodium Dodecyl Sulfate Coated Alumina Modified with Bis(5‐bromo‐2‐hydroxy‐benzaldehyde)‐2‐methyl‐1,5‐pentane Diimine (BBHBPDI) Prior to Their Flame‐AAS Determination

Preconcentration/separation of Co(II), Fe(III), Pb(II), Cr(III), Cu(II) and Cd(II) ions using bis(5‐bromo‐2‐hydroxy‐benzaldehyde)‐2‐methyl‐1,5‐pentane diimine (BBHBPDI) on SDS coated alumina has been reported. The influences of the analytical parameters including pH, ligand and SDS amount, type and concentration of eluent and sample volume on metal ions recoveries were investigated. At optimum values of all variables the relative standard deviation are between 2.5–2.7 and preconcentration factor was 375, while recoveries for all understudy metal ions are higher than 95%, determination limits are between 1.5–2.7. The method has been successfully applied to determination of Co(II), Fe(III), Pb(II), Cr(III), Cu(II) and Cd(II) ions content in some real samples.     

Molten potassium thiocyanate: The reactions of some compounds of iron,cobalt, nickel,copper and zinc

The electronic spectra of four transition metal cations stable in molten potassium thiocyanate [Fe(II), Co(II), Ni(II) and Cu(I)] are reported together with their reactions and those of three unstable cations [Fe(III), Co(III) and Cu(II)] with a variety of anions including cyanide, cyanate and sulphide. A novel reduction of zinc(II) sulphate is also reported.     

Extraction of Mn(II), Co(II), Cr(III) and Fe(III) from succinic acid medium by high molecular weight amines

The extraction behavior of Mn(II), Co(II), Cr(III) and Fe(III) has been studied in high molecular weight amines from succinic acid medium. The effect of different variables, like, type of amine, effect of pretreatment of amine with various acids, type of diluent and concentration of metal, succinate, hydrogen ions and amine, has been investigated. Extraction of Cr(III) and Fe(III) species is proposed and some binary separations achieved.     

Ion flotation behaviour of thirty-one metal ions in mixed hydrochloric/nitric acid solutions

The ion flotation of 31 metal ions in hydrochloric/nitric acid solution with the cationic surfactant cetylpyridinium chloride was investigated. A 25-ml portion of 0.27-2.87 x 10(-4)M metal ion and 1.8-6.0 x 10(-4)M cetylpyridinium chloride solution in 0.17-3.4M acid mixture ([HCl]:[HNO(3)] = 2.4:1) was subjected to flotation in a cell, 22.5 cm high and 4.0 cm in diameter, for 5 min, with nitrogen bubbles. Ir(IV), Pt(IV), Ge(IV), Sn(IV), Bi(III), Au(III), Tl(III), Pd(II) and Sn(II) were floated from solution in 95-100% yield; Ru(III), Rh(III), Ir(III), Hg(II), Ag(I) and Tl(I) were partly floated, while Cr(VI), Ti(IV), Zr(IV), Ga(III), In(III), Fe(III), Sb(III), Al(III), Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), CD(II) and Pb(II) were floated with less than 20% yield. The flotation behaviour of these metal ions in the mixed acid system was compared with that in hydrochloric acid. The flotation is more efficient in the mixed acid system.     

Solid phase extraction and determination of metal ions in aqueous samples using Quercetin modified Amberlite XAD-16 chelating polymer as metal extractant

A new chelating polymer has been developed using Amberlite XAD-16 anchored with Quercetin. The modified polymer was characterised by Fourier Transform Infra Red (FTIR) spectroscopy, thermogravimetric analysis, surface area analysis and elemental analysis. The Quercetin anchored polymer showed superior binding affinity for Cr(III), Mn(II), Fe(III), Co(II), Ni(II) and Cu(II) with greater than 95% adsorption under optimum conditions. The optimum pH conditions for the quantitative sorption of metal ions were studied. The developed method showed superior extraction qualities with high metal loading capacities of 387, 313, 195, 473, 210 and 320 µmol g^?1 for Cu(II), Co(II), Cr(III), Fe(III), Mn(II) and Ni(II), respectively. The rate of metal ion uptake i.e. kinetics studies performed under optimum levels, showed t _1/2 for Co(II), Cu(II), Cr(III), Fe(III), Mn(II) and Ni(II) is 20, 15, 25, 10, 30 and 15 min, respectively. Desorption of metal ions was effective with 10 mL of 2 M HCl prior to analysis using flame atomic absorption spectrophotometer. The chelating polymer was highly ion selective in nature even in the presence of interferent ions, with a high preconcentrating ability for the metal ions of interest. The developed chelating polymer was tested on its utility with synthetic and real samples like river, tap water samples and also with multivitamin tablets. It showed relative standard deviation (R.S.D.) values of/less than 3.0% reflecting on the accuracy and reproducibility of data using the newly developed chelating polymer.     

Luminol-K2S2O8体系中金属离子化学发光行为的研究

报导了在自行设计的流动注射式化学发光分析仪上,对Luminal-K2S2O8体系中32种金属离子的化学发光行为的系统研究.确定了对金属离子的最优测定条件以及大多数金属离子的检出极限和线性范围.     

Synthesis and analytical properties of a chelating resin functionalised with bis-(N,N'-salicylidene)1,3-propanediamine ligands

A polystyrenedivinylbenzene-based macroreticular resin was functionalised with bis-(N,N'-salicylidene)1,3-propanediamine ligands and its analytical properties have been investigated. The pH dependence of metal resin chelation has been determined for Cu(II), Ni(II), Co(II), Zn(II), Fe(II), Mn(II), Pb(II), Cd(II) and Cr(III). Trace amounts of these metal ions were quantitatively retained on the resin at neutral pH and easily recovered by elution with 1 N hydrochloric acid. The resin exhibits good chemical stability and fast equilibration with the metal ion making it useful for rapid concentration of trace amounts of metal ions on the resin columns.     

Use of Metal Ions for the Estimation of the Efficiency of Antibody–Antigen Interactions

The applicability of Co(II), Ni(II), Fe(III), and Cr(III) ion labels to the immunochemical determination of ribonuclease, Candida albicans, Trichophyton rubrum, and Phoma betaeantigens was studied. The catalytic waves of hydrogen evolution, which occur in transition metal solutions in the presence of protein compounds, were used as analytical signals. The maximum catalytic effect depends on the pH, buffer capacity, and nature of buffer solution and on the nature of antigen to be determined. A new procedure was proposed for the immunochemical determination of the ribonuclease antigen using Co(II) ions as a label. The conditions of the formation and degradation of the antibody–antigen immune complex were found. The linear analytical range for the ribonuclease antigen was 0.005–1.0 mg/mL.     

Use of Escherichia coli immobilized on amberlite XAD-4 as a solid-phase extractor for metal preconcentration and determination by atomic absorption spectrometry.

A sensitive solid-phase extraction technique (SPE) for the enrichment of Fe(III), Co(II), Mn(II) and Cr(III) prior to atomic absorption spectrometric analysis is described. Escherichia coli immobilized on Amberlite XAD-4 was used as a solid-phase extractor. The effects of the pH, amount of solid-phase, eluent type and volume of the sample solution on the recovery of the metal ions were investigated. The effect of diverse ions was also investigated. The recoveries of Fe(III), Co(II), Mn(II) and Cr(III) under the optimum conditions were found to be 99 +/- 2, 99 +/- 3, 98 +/- 2, 98 +/- 3%, respectively, at the 95% confidence level. The detection limits of the metal ions were found as to be 2.4, 3.8, 1.3 and 1.7 ng ml(-1) for Fe(II), Co(II), Mn(II) and Cr(III) respectively, by applying a preconcentration factor of 25. The proposed enrichment method was applied to the determination of analytes in Atatürk Dam water samples, and alloy samples (RSD < 5%). The accuracy of the method was verified on certified alloy samples (NBS SRM 85b and NBS SRM 59a). The analytes were determined with a relative error lower than 5% in water and alloy samples.     

Functional Water Soluble Polymers with Ability to Bind Metal Ions

Water-soluble polymers containing amine, carboxylic acid, and sulfonic acid groups were investigated as polychelatogens through the liquid phase polymer-based retention, LPR technique, under different experimental conditions. The metal ions investigated are: Ag(I), Cu(II), Co(II), Ni(II), Ca(II), Hg(II), and Cr(III). An important effect of the pH and the ligand type was observed on the metal ion retention. As the pH increases the metal ion retention increases. Two types of metal ion interactions are involved: coordination and electrostatic.     

Komplexe von N,N-Di-(β-hydroxyäthyl)-dithiocarbaminat mit Übergangs- und Nachübergangs-Elementen

The complexation tendencies of N,N-di-(-hydroxyethyl)-dithiocarbamic acid [DEADTCH, (CH₂CH₂OH)₂NCSSH] towards a large number of metal ions have been examined. The complexes formed with transition and post-transition metal ions in slightly acidic and neutral solutions have the general formulaM(DEADTC) _x, wherex is the valence state of the metal,M=Cr(III), Fe(III), Co(III), Ni(II), Cu(II), Zn(II), Cd(II), Hg(II), Tl(I), and Tl(III). In addition the interesting mixed ligand complex ClHg(DEADTC) was prepared. These complexes have been characterised through X-ray, magnetic, conductance and spectral (UV and IR) measurements.