Synthesis and characterization of Cu(I) chelate complexes with 1,3-bis(diphenylphosphino)propane, 1,2-bis(diphenylphosphino)benzene and perfluorinated carboxylates

Cu(I) complexes with 1,3-bis(diphenylphosphino)propane (dppp), 1,2-bis(diphenylphosphino)benzene (dppB) and perfluorinated carboxylates of the general formula [Cu(diphosphine)₂](RCOO), R=C₂F₅, C₄F₉, C₆F₁₃, C₈F₁₇, C₉F₁₉, have been prepared and characterized with MS, IR and ¹H, ³¹P, ¹³C, ¹⁹F, ⁶³Cu NMR spectroscopy. The presence of distinct bis-chelated cations of [Cu(diphosphine)₂]⁺ type and uncoordinated carboxylate anions has been proposed.     

Synthesis, characterization and electrochemical studies of the heterometallic diclusters [{Fe2(μ-CO)(CO)6(μ-PPh2)Au}2(diphosphine)] (diphosphine=dppm, dppip, dppe, dppp)

Treatment of [(ClAu)₂(diphosphine)] {diphosphine=bis(diphenylphosphino)methane (dppm), bis(diphenylphosphino)isopropane (dppip), 1,2-bis(diphenylphosphino)ethane (dppe), 1,3-bis(diphenylphosphino)propane (dppp)} with two equivalents of the anion [Fe₂(μ-CO)(CO)₆(μ-PPh₂)]⁻ in the presence of TlBF₄ gives the new heterometallic diclusters [{Fe₂(μ-CO)(CO)₆(μ-PPh₂)Au}₂(diphosphine)] that have been isolated and characterized. Their ³¹P-NMR spectra show different patterns as a function of the diphosphine ligand. The electrochemical behavior of these compounds has been investigated and compared with that of the mono- [Fe₂(μ-CO)(CO)₆(μ-PPh₂)(μ-AuPPh₃)] and tricluster [{Fe₂(μ-CO)(CO)₆(μ-PPh₂)Au}₃(triphos)] derivatives.     

Hydrogenation of heteroaromatic nitrogen compounds catalyzed by rhodium and iridium systems containing diphosphine ligands

The systems prepared in situ by addition of two equivalents of diphosphine [1,2-bis(diphenylphosphino)ethane (dppe), 1,3-bis(diphenylphosphino)propane (dppp) and 1,4-bis(diphenylphosphino)butane (dppb)] to M₂Cl₂(COE)₄ (M = Rh, Ir; COE = cyclooctene) showed to be efficient and regioselective precatalysts for the hydrogenation of quinoline, isoquinoline, 5,6- and 7,8-benzoquinoline and acridine, under mild reaction conditions (130°C and 4 atm H₂). The Rh systems showed to be more active than the corresponding Ir ones, except for the case of acridine, where an inversed tendency was observed (Ir > Rh).     

Cobalt-catalyzed cross-coupling reactions of alkyl halides with aryl Grignard reagents and their application to sequential radical cyclization/cross-coupling reactions

Reactions of alkyl halides with arylmagnesium bromides in the presence of cobalt(II)(diphosphine) complexes are discussed. Treatment of 1-bromooctane with phenylmagnesium bromide with the aid of a catalytic amount of CoCl₂(dppp) [DPPP=1,3-bis(diphenylphosphino)propane] yielded octylbenzene in good yield. The reaction mechanism would include single electron transfer from an electron-rich cobalt complex to alkyl halide to generate the corresponding alkyl radical. The mechanism was justified by CoCl₂(dppe)-catalyzed [DPPE=1,2-bis(diphenylphosphino)ethane] sequential radical cyclization/cross-coupling reactions of 6-halo-1-hexene derivatives that yielded benzyl-substituted cyclopentane skeletons.     

Chemistry of Ruthenium Polypyridine Complexes: V. Electronic Structure of Ruthenium(II) Bipyridine-Diphosphine Mixed-Ligand Complexes

Comparative analysis of the donor-acceptor capacities of diphosphine ligands in two series of complexes: cis-[Ru(bpy)2(LL)]^{q +} [LL = 2,2'-bipyridine (bpy), o-benzoquinonediimine (bqdi), cis-1,2-bis(diphenylphosphino)ethane, cis-1,2-bis(diphenylphosphino)ethylene (dppen), (NH3)2, and (CO)2] and [Ru(NH₃)₄. (LL)]^{2 +} (LL = bpy, dppen, and bqdi), was performed. Diphosphines are the strongest donors; they compare in -acceptor capacity which is associated with phosphorus d orbitals with 2,2'-bipyridine and fall far short of o-benzoquinonediimine and carbonyl.     

Dependence of the product on the P–P ligand in reactions of [RuCl3(NO)(P–P)] complexes (P–P = aromatic diphosphines) with 2-mercaptopyridine

This study presents the syntheses and characterization of 2-mercaptopyridine (pyS⁻) complexes containing ruthenium(II) with the following general formula [Ru(pyS)₂(P–P)], P–P = (c-dppen) = cis-1,2-bis(diphenylphosphino)ethylene) (1); (dppe) = 1,2-bis(diphenylphosphino)ethane (2); (dppp) = 1,3-bis(diphenylphosphino)propane (3) and (dppb) = 1,4-bis(diphenylphosphino)butane (4). The complexes were synthesized from the mer- or fac-[RuCl₃(NO)(P–P)] precursors in the presence of triethylamine in methanol solution with dependence of the product on the P–P ligand. The reaction of pyS⁻ with a ruthenium complex containing a bulky aromatic diphosphine dppb disclosed a major product with a dangling coordinated dppbO-P, the [Ru(pyS)₂(NO)(η¹-dppbO-P)]PF₆(5). In addition, this work also presents and discusses the spectroscopic and electrochemical behavior of 1–5, and report the X-ray structures for 1 and 5.     

Regioselective cyclotrimerization of phenylacetylenes to 1,2,4-triarylbenzenes catalyzed by iridium-diphosphine complexes

The organoiridium derivatives HIr(cod)(P-P) (cod=1,5-cyclooctadiene; P-P=dppm (bis(diphenylphosphino)methane), dppe (1,2-bis(diphenylphosphino)ethane), dppp (1,3-bis(diphenylphosphino)propane), dppb (1,4-bis(diphenylphosphino)butane)) catalyze the regioselective cyclotrimerization of phenylacetylene as well as of its derivatives p-CH₃OC₆H₄CCH and p-CF₃C₆H₄CCH. The catalytic activity of the precursors as well as the selectivity towards formation of the 1,2,4-triarylbenzenes (up to 100%) are influenced by the diphosphine, and both increase by decreasing the size of the phosphine-iridium chelate ring.     

Symmetric Ni(II) dithiocarbamates with bidentate phosphines ligands

Ni(II) mononuclear dithiocarbamate complexes with bidentate P,P ligands of composition [Ni(R₂dtc)(P,P)]X {R?=?pentyl (pe), benzyl (bz); dtc?=?S₂CN^?; P,P?=?1,2-bis(diphenylphosphino)ethane (dppe), 1,4-bis(diphenylphosphino)butane (dppb), 1,1′-bis(diphenylphosphino) ferrocene (dppf); X?=?ClO₄, Cl, Br, NCS} and binuclear complexes of composition [Ni₂(μ-dpph)(R₂dtc)₂]X₂ with a P,P-bridging ligand {P,P?=?1,6-bis(diphenylphosphino)hexane (dpph); X?=?Cl, Br, NCS} have been synthesized. The complexes have been characterized by elemental and thermal analysis, IR, electronic and ³¹P{¹H}-NMR spectroscopy, magnetochemical and conductivity measurements. Single crystal X-ray analysis of [Ni(pe₂dtc)(dppf)]ClO₄ confirmed a distorted square planar coordination in the NiS₂P₂ chromophore. For selected samples, the catalysis of graphite oxidation was studied.     

Conformational equilibria in 7-membered ring metal chelate complexes

Bis(diphosphine)metal and (diphosphine)(diene)metal (M = Rh, Ir) cationic complexes containing 7-membered chelate rings have been studied by low temperature ³¹P and ¹H NMR spectroscopy. For cyclooctadiene-1,4-bis(diphenylphosphino)butane- and -DIOP-rhodium, and cyclooctadiene-1,4-bis(diphenylphosphino)butane-iridium complexes, boat and chair conformations may be distinguished at low temperature. ¹H NMR spectra of these and analogous complexes suggest that both boat and chair conformers are significantly populated at room temperature. Bis(diphosphine) complexes of rhodium and iridium show very complex dynamic behaviour.     

Influence of bidentate phosphine ligands on the chemistry of [FeFe]-hydrogenase model: insight into molecular structures and electrochemical characteristics

Substitution of carbonyl ligands of the hydrogenase model complex [Fe₂(μ-SeCH₂CH(Me)CH₂Se-μ)(CO)₆] ( A ), by 1,1′-bis (diphenylphosphino)ferrocene (dppf), 1,2-bis (diphenylphosphino)benzene (dppbz) or 1,2-bis (diphenylphosphino)acetylene (dppac) is investigated. It is found that the reaction product depends on the diphosphine used. In the case of dppf, the product is an intramolecular bridged disubstituted complex [Fe₂{μ-SeCH₂CH(Me)CH₂Se-μ}(CO)₄{μ,κ¹,κ¹(P,P)-dppf}] ( 1 ), while the dppac-reaction produces an intermolecular bridged tetra-iron model [Fe₂{μ-SeCH₂CH(Me)CH₂Se-μ}(CO)₅]₂{μ,κ¹,κ¹(P,P)-dppac} ( 2 ). However, the dppbz-reaction gives [Fe₂{μ-SeCH₂CH(Me)CH₂Se-μ}(CO)₄{κ²(P,P)-dppbz}] ( 3 ) in which the dppbz ligand is bonded to one Fe atom in a chelated manner. The newly prepared complexes ( 1 – 3 ) have been characterized by elemental analysis, IR, ¹H-, ¹³C{H}-, ³¹P{H}-, ⁷⁷Se{H}-NMR spectroscopy and X-ray structure determination. The electrochemical behavior of 2 and 3 , in absence and presence of acid, is described by cyclic voltammetric measurements in CH₂Cl₂.     

Trichlorostannato(diphosphine)rhodium(I) complexes. Crystal structure of [Rh(SnCl3)(1,5-cyclooctadiene)(dppp)]

The molecular structure of [Rh(SnCl₃)(1,5-cyclooctadiene)(dppp)] [dppp = 1,3-bis(diphenylphosphino)propane] has been determined to R_F = 3.6% single-crystal X-ray techniques. The crystal contains two discrete molecules 1 and 2 per asymmetric unit. Molecule 1 is best described as distorted trigonal bipyramidal with the diolefin and the diphosphine occupying both apical and equatorial positions and the SnCl₃ group on an equatorial position, and molecule 2 as distorted square pyramidal with the equatorial positions occupied by the diolefin and the diphosphine, respectively, and the SnCl₃ fragment in the apical position. In solution at room temperature, complexes [Rh(SnCl₃)(COD)(diphosphine)] exhibit tin dissociation and various intramolecular rearrangements.     

Ruthenium dihydrogen complexes with wide bite angle diphosphines

The wide bite angle diphosphines homoxantphos (10,11-dihydro-4,5,-bis(diphenylphosphino)dibenzo[b,f]oxepine), sixantphos (4,6-bis(diphenylphosphino)-10,10-dimethylphenoxasilin), and thixantphos (2,8-dimethyl-4,6-bis(diphenylphosphino)phenoxathiin) were used to prepare cis[MH(2)(diphosphine)(2)] complexes (1a-f) by reaction of [Ru(cod)(cot)] (cod = cyclo-octa-1,5-diene, cot = cyclo-octa-1,3,5-triene) with 2 equiv of the diphosphine under dihydrogen pressure. The electronic properties of the thixantphos ligand were varied. Complexes 1a-f can be protonated with HBF(4) or CF(3)COOH to yield hydrido(dihydrogen) complexes cis[MH(H(2))(diphosphine)(2)](+) (2a-f), which were characterized by VT (variable temperature) NMR and T(1) measurements. These complexes show fast hydrogen atom exchange between the eta(2)-H(2) and the terminal hydride at all temperatures studied. They are thermally unstable toward dihydrogen loss yielding the cationic monohydride complexes cis[MH(diphosphine)(2)](+) (3a-f). Coordination of the eta(2)-H(2) is dominated by sigma --> d donation, and hence, the H-H distance is hardly influenced by the electronic properties of the ligands.     

Bis(alkoxycarbonyl) complexes of platinum: preparation,reactivity and their role in carbonylation reactions

bis(alkoxycarbonyl) complexes of platinum of the type [Pt(COOR)₂L] [L = 1,2-bis(diphenylphosphino)ethane (dppe), 1,3-bis(diphenylphosphino)propane (dppp), l,4-bis(diphenylphosphino)butane (dppb), 1,1'-bis(diphenylphosphino)ferrocene (dppf) or 1,2-bis-(diphenylphosphino)benzene (dpb); R = CH₃, C₆H₅ or C₂H₅] were obtained by reaction of [PtCl₂L] with carbon monoxide and alkoxides. Palladium and nickel complexes gave only carbonyl complexes of the type [M(CO)L] or [M(CO)₂L]. The new complexes were characterized by chemical and spectroscopic means. The X-ray structure of [Pt(COOCH₃)₂(dppf] · CH₃OH is also reported. The reactivity of some alkoxycarbonyl complexes was also investigated.     

Carborane complexes of ruthenium with long-chain diphosphine ligands as effective catalysts of controlled radical polymerization

Catalytic systems based on carborane complexes of ruthenium with long-chain diphosphine ligands, such as 1,4-bis(diphenylphosphino)butane and 1,5-bis(diphenylphosphino)pentane, are prepared for the controlled radical polymerization of methyl methacrylate. It is found that the used metallacarboranes can catalyze polymerization initiated by both carbon tetrachloride and 2,2′-azo-bis(isobutyronitrile). It is shown that closo-ruthenacarborane with 1,5-bis(diphenylphosphino)pentane 3,3-[PPh₂(CH₂)₅PPh₂]-3-Cl-3,1,2-closo-RuC₂B₉H₁₁ and its o-phenylenecycloborated derivatives make it possible to conduct polymerization at higher rates than those attained with the use of previously synthesized complexes based on diphosphines with a smaller length of the hydrocarbon fragment. The relationship between the redox potential of the complex and the efficiency of control over molecular-mass characteristics of the polymers is analyzed. Experiments reveal that the addition of small amounts of aliphatic amines causes a considerable increase in the rate of polymerization and leads to a decrease in the concentration of the catalyst with retention of a high degree of control over the process.     

The cyclic "silver-diphos" motif [Ag2(mu-diphosphine)2]2+ as a synthon for building up larger structures

The dinuclear, cyclic structural motif [Ag2(diphosphine)2](2+), here termed the "silver-diphos" motif, previously observed in many diphosphine-silver complexes, has been investigated as a synthon for building up larger structures such as coordination cages and polymers. A series of ligands containing one to four meta-substituted diphosphine groups, attached via a central core, has been synthesized from the corresponding fluoroarenes by reaction with KPPh2. Upon reaction with silver salts, the target synthon is adopted by meta-substituted diphosphines 1,3-bis(diphenylphosphino)benzene (L1), 2,6-bis(diphenylphosphino)benzonitrile (L2), and 3,5-bis(diphenylphosphino)benzamide (L3), each of which gives a single species in solution consistent with the expected dimeric complexes [Ag2L2(anion)2]. X-ray crystal structures of [Ag2(L1)2(OTf)2] and [Ag2(L2)2(SbF6)2] confirm the adoption of the silver-diphos motif in the solid state. Amide-functionalized diphosphine L3 forms a hydrogen-bonded chain structure in the solid state via the amide group. A discrete boxlike cage [Ag4(L4)2][SbF6]4 based on two silver-diphos synthons is formed when the tetraphosphine Ph2Sn{3,5-bis(diphenylphosphino)benzene}2 (L4) reacts with silver(I). Its single-crystal X-ray structure reveals a central cavity of minimum diameter, ca. 5.0 A, which contains a single SbF6(-) counterion disordered over two sites. In contrast to the highly selective behavior of the di- and tetra-phosphines L1-L4, the heptaphosphine P{3,5-bis(diphenylphosphino)benzene}3 L5 and the hexaphosphine PhSn{3,5-bis(diphenylphosphino)benzene}3 L6 give dynamic mixtures upon reaction with silver salts in solution. This nonspecific behavior is rationalized by the fact that their diphosphine groups are not appropriately disposed to form stable discrete structures based on the silver-diphos synthon. By contrast, the octaphosphine Sn{3,5-bis(diphenylphosphino)benzene}4 L7 does selectively form a single, discrete, highly symmetrical product in solution, [Ag4(L7)(OTf)4]. In this case, the ligand unexpectedly adopts an interarm tetra-chelating coordination mode, resulting in a continuous 24-membered ring around the periphery of the molecule. To understand the adoption of this unusual coordination mode, the alternative diphosphine Ph2Sn(3-diphenylphosphinobenzene)2 L8, which models a single interarm chelating site of L7, was also investigated. By contrast to L7, its coordination was nonspecific, giving mixtures of silver complexes upon reaction with AgOTf. The selective interarm chelation by L7 may therefore be stabilized by the continuous coordination ring in [Ag4(L7)(OTf)4]; that is, the four chelating sites can be thought of as acting in a cooperative manner. Alternatively, interarm steric repulsions between phenyl groups may favor interarm chelation. Overall, we conclude that, if the diphosphine groups are appropriately articulated to act independently (i. e., they are adequately separated and oriented), the silver-diphos synthon can be a useful tool for the coordination-based self-assembly of larger structures.     

New cationic monocarbonyls of manganese(I) with nitriles and isonitriles

Summary Monocarbonyls of manganese(I) with two chelating diphosphinestrans-[Mn(CO)(diphos)₂(L)]A, [diphos = 1,2-bis(diphenylphosphino)ethane, dppe, or bis(diphenylphosphino)methane, dppm; L=nitriles, NCR (NCMe, NCEt, NCPh, or NCCH₂Ph), dinitriles, NCGCN (NCCH₂CN, NCCH₂CH₂CN, oro-(NC)₂C₆H₄), isonitriles, CNR, (CNPh, or CNBu^t); A = C1O ₄ ^– or PF ₆ ^– ],trans-[(Mn(CO)(dppm)₂)₂(-NCCH₂CH₂CN)](ClO₄)₂ and the monocarbonyl with one diphosphine,mer-[Mn(CO)(dppe)(CNBu^t)₃]ClO₄, have been prepared fromtrans-[Mn(CO)(diphos)₂Br].In this paper we have adopted the convention that gives positive shift to signals at higher frequency of ext. H₃PO₄.     

New Pentacoordinated Rhodium Species as Unexpected Products during the In Situ Generation of Dimeric Diphosphine‐Rhodium Neutral Catalysts

Dimeric rhodium complexes of the type [Rh(PP)(μ₂‐Cl)]₂ (PP=diphosphine) are often used as precatalysts and are generated “in situ” from the corresponding diolefin complexes by exchange of the diene with the desired diphosphine. Herein, we report that the “in situ” procedure also leads to unexpected monomeric pentacoordinated neutral complexes of the type [RhCl(PP)(diolefin)], for the first time herein characterized by NMR spectroscopy and X‐ray crystallography for the ligands 1,4‐bis(diphenylphosphino)propane (DPPP), 1,4‐bis(diphenylphosphino)butane (DPPB), and 2,2′‐bis(diphenylphosphino)‐1,1′‐binaphthyl (BINAP). The pentacoordinated complexes are in equilibrium with the dimeric target compound [Rh(PP)(μ₂‐Cl)]₂. The equilibrium is influenced by the rhodium‐diolefin precursor, the solvent and the temperature. Based on the results of NMR and UV/Vis spectroscopic analysis (kinetics) it could be shown that the pentacoordinated complex [RhCl(PP)(diolefin)] may arise both from the “in situ”‐generated neutral complex [Rh(PP)(μ₂‐Cl)] by reaction with the free diolefin and, more surprisingly, directly from [Rh(diolefin)(μ₂‐Cl)]₂ and the diphosphine.     

Ruthenafuran Complexes Supported by the Bipyridine-Bis(diphenylphosphino)methane Ligand Set: Synthesis and Cytotoxicity Studies

Mononuclear and dinuclear Ru(II) complexes cis-[Ru(κ²-dppm)(bpy)Cl₂] (1), cis-[Ru(κ²-dppe)(bpy)Cl₂] (2) and [Ru₂(bpy)₂(μ-dpam)₂(μ-Cl)₂](Cl)₂ ([3](Cl)₂) were prepared from the reactions between cis(Cl), cis(S)-[Ru(bpy)(dmso-S)₂Cl₂] and diphosphine/diarsine ligands (bpy = 2,2′-bipyridine; dppm = 1,1-bis(diphenylphosphino)methane; dppe = 1,2-bis(diphenylphosphino)ethane; dpam = 1,1-bis(diphenylarsino)methane). While methoxy-substituted ruthenafuran [Ru(bpy)(κ²-dppe)(C^O)]⁺ ([7]⁺; C^O = anionic bidentate [C(OMe)CHC(Ph)O]⁻ chelate) was obtained as the only product in the reaction between 2 and phenyl ynone HC≡C(C=O)Ph in MeOH, replacing 2 with 1 led to the formation of both methoxy-substituted ruthenafuran [Ru(bpy)(κ²-dppm)(C^O)]⁺ ([4]⁺) and phosphonium-ring-fused bicyclic ruthenafuran [Ru(bpy)(P^C^O)Cl]⁺ ([5]⁺; P^C^O = neutral tridentate [(Ph)₂PCH₂P(Ph)₂CCHC(Ph)O] chelate). All of these aforementioned metallafuran complexes were derived from Ru(II)–vinylidene intermediates. The potential applications of these metallafuran complexes as anticancer agents were evaluated by in vitro cytotoxicity studies against cervical carcinoma (HeLa) cancer cell line. All the ruthenafuran complexes were found to be one order of magnitude more cytotoxic than cisplatin, which is one of the metal-based anticancer agents being widely used currently.     

Cationic rhodium hydrogenation catalysts containing chelating diphosphine ligands: effect of chelate ring size

Earlier studies on the [(1,2-bis(diphenylphosphino)ethane)rhodium]^p+-catalyzed hydrogenation of 1-hexene and methyl-(Z)-α-acetamidocinnamate have been extended to catalysts containing larger chelating diphosphine ligands, i.e., Ph₂P(CH₂)_nPPh₂, where n = 3, 4 and 5. Comparisons include measurements of equilibrium constants for the binding of the olefinic substrates to the catalysts and of the catalytic hydrogenenation rates. Some related measurements also are reported for the corresponding catalyst systems containing the chiral ligand, 4R,5R-bis(diphenylphosphinomethyl)-2,2,-dimethyldioxalane (DIOP) and non-chelating PPh₃ ligands.     

New rhodium(I) supramolecular structures containing pyridyl and bipyridyl ligands

The use of dimeric [RhCl(CO)₂]₂ as acceptor unit in the construction of mono-, bi- and three-dimensional metallosupramolecular structures is reported.The reaction of the dimer with the alkynylgold complex [Au(CCC₅H₄N)(CNC₆H₄O(O)CC₆H₄OC₁₀H₂₁)] resulted in the mononuclear rhodium complex 1, through an unexpected transfer of the isonitrile ligand from the gold to the rhodium centres.The reaction of the linear unit [RhCl(CO)₂]₂(μ-4,4′-bipy) (3) with the diphosphine 1,4-bis(diphenylphosphino)butane (dppb) yielded the simultaneous formation of both metallomacrocycles [RhCl(CO)(dppb)]₂ (4) and {[RhCl(CO)]₂(μ-4,4′-bipy)}₂(μ-dppb)₂ (5). The use of a diphosphine with smaller bite angle, 1,1′-bis-(diphenylphosphino)methane, (dppm) formed the three-dimensional {[RhCl(CO)]₂(μ-4,4′-bipy)}₂(μ-dppm)₄ complex (6) that incorporates four diphosphine units connecting two [RhCl(CO)₂]₂(μ-bipy) linear edges. PM3 semi-empirical method has been used to calculate the optimised geometry of compound 6.