Formation of unsymmetrical cis-dialkyls of platinum(II) from platinum(II) hydroxo-complexes

The (hydroxo) methyl complex Pt(OH)(CH₃)(Diphos) [Diphos = Ph₂PCH₂CH₂PPh₂] reacts with compounds containing acidic CH bonds (HX) to give unsymmetrical cis-dialkyls of general formula Pt(CH₃)X(Diphos) [X = CH₂COCH₃, CH(COCH₃)₂, CH₂CN or CH₂NO₂]; both the methyl and the cyclohexenyl complexes Pt(OH)R(Diphos) (R = CH₃ or C₆H₉) insert carbon monoxide to give hydroxycarbonyl complexes PtR(CO₂H)(Diphos) which are remarkably stable to decomposition by β-elimination.     

Chlorochalcogenation of acetylenes with benzenesulfen-(or selenen)amides and Tin(IV) chloride

Benzenesulfenamides and benzeneselenenamides reacted with terminal and internal acetylenes (hex-1-yne, phenylacetylene, hex-3-yne, but-2-yne-1,4-diol, and diphenylacetylene) in the presence of SnCl₄ to give the corresponding chloroethenyl sulfides and selenides. From symmetric acetylenes, only E isomers (E)-ArXCR=CClR (X = S, Ar = Ph, 4-ClC₆H₄; R = Et, Ph, HOCH₂; X = Se, Ar = Ph, R = Et) were formed. The reactions of benzenesulfenamide with terminal acetylenes, apart from the corresponding Markownikoff and anti-Markownikoff adducts (PhSCH=CClR and PhSCR=CHCl, R = Bu, Ph) gave ethynyl sulfides PhSC=CR (R = Ph, Bu) and cis/trans-isomeric 1,2-bis(phenylsulfanyl)chloroethenes PhSCR=CClSPh (R = Ph, Bu). The results were interpreted assuming intermediate generation of sulfenyl and selenenyl chlorides via reaction of sulfen-and selenenamides with SnCl₄.     

The synthesis and reactivity of polysilylacetylenes: Diels—Alder reactions to give bis (silyl) benzenes

Six bis(silyl)acetylenes (XMe²Si? C?C? SiMe₂X) with the following varied silicon substituents X were prepared: 1 (Me, Me); 2 (H, H); 3 (C1, H); 4 (CI, CI); 5 (MeO, H); 6 (MeO, MeO). While 1 and 2 may be prepared by the reaction of dilithio- or bis(bromomagnesium)-acetylide with the appropriate chlorosilane, similar reactions designed to give 3–6 yielded oligomers, XMe₂Si? (? C?C? SiMe₂)_n? X, 7, X=CI, MeO, as the major products, indicating that the acetylenic functionality on silicon activates the chlorosilane towards nucleophilic substitution. Compounds 3 and 4 were prepared by free radical chlorination of 2. Methanolysis of 3 and 4 gave quantitative yields of 5 and 6 respectively. Compounds 1–6 undergo a Diels–Alder reaction with α-pyrone to produce, after loss of carbon dioxide, bis(silyl)-substituted benzene derivatives. The order of reactivity has been determined to be: 4=6>3=5>1>2, indicating that chloro or alkoxy substituents favor the cycloaddition with 2- pyrone. The adducts formed by compounds 3–6 undergo an unusually facile hydrolysis or elimination to give 1,1,3,3-tetramethyl-1,3-disila-2-oxaindane.     

Crystal and molecular structures of (η-xanthene)- (η-cyclopentadienyl)iron(II) hexafluorophosphate and (η-2-methylthianthrene)(η-cyclopentadienyl)iron(II) hexafluorophosphate

The neutral complexes (η⁵-C₅H₅NiXL (X = Cl, L = PPh₃ (I); L = PCy₃ (II); X = Br, L = PPh₃ (III); L = PCy₃ (IV); X = I, L = PPh₃ (V); L = PCy₃ (VI)) have been obtained by treating NiX₂L₂ with thallium cyclopentadienide. The same reaction in the presence of TlBF₄ gives cationic derivatives [(η⁵-C₅H₅)NiL₂]BF₄ (L = 2PPh₂Me (VII); L = dppe (VIII)), whereas mononuclear complexes containing two different ligands (L₂ = PPh₃ + PCy₃ (IX)) or dinuclear [(η⁵-C₅H₅)Ni(PPh₃)]₂dppe(BF₄)₂ (X) are obtained from the reaction of III with TlBF₄ in the presence of a different ligand. Reduction of cationic complexes with Na/Hg gives very unstable nickel(I) derivatives (η⁵-C₅H₅)NiL₂, which could not be isolated purely. Similar reduction of neutral complexes under CO gives a mixture of decomposition products containing [(η⁵-C₅H₅)Ni(CO)]₂ and nickel(o) carbonyls, whereas in the presence of acetylenes, dinuclear [(η⁵-C₅H₅)Ni]₂(RCCR′) (R = R′ = Ph; R = Ph, R′ = H) are obtained.     

Oxidation of aromatic compounds: XVI. Radical cations derived from acetylenic compounds with electron-withdrawing groups: Reactions and ESR parameters

One-electron oxidation of aryl-substituted acetylenes ArC≡CX where X is an electron-withdrawing group gives different products, depending on the X substituent. Acetylenic substrates with medium-strength electron-withdrawing substituents, X = CO₂R, COAr, COR, PO(OEt)₂, give rise to tetrasubstituted ethenes X(ArCO)C=C(COAr)X. Compounds with strong electron-withdrawing groups (X = COCF₃, COCO₂R, CN) are converted into furan derivatives. Probable mechanisms of transformations of ArC≡CX radical cations into the final products are discussed. Radical cations derived from disubstituted acetylenes were characterized by ESR spectroscopy.     

Hydroxyl-directed hydrogenation of homoallylic alcohols. Effects of achiral and chiral rhodium catalysts on 1,3 stereocontrol.

The hydroxyl-directed hydrogenation of homoallylic alcohols is examined with cationic rhodium-(I) and iridium-(I) catalysts. These reactions proceed with high levels of diastereoselection when either Rh(Diphos)⁺ or Ir(pry)Pcy₃⁺ are employed as catalysts.     

Synthesis of 2,3-Disubstituted Thiophenes from 1,3-Dimetallated Acetylenes and Non-Enolizable Thiocarbonyl Compounds

Reaction of 1,3-dimetallated acetylenes KC°C-CH(K)R (R=alkyl, O-alkyl, S-alkyl, aryl, N(alkyl)₂) with non-enolizable thiocarbonyl compounds XCSSCH₃ (X=aryl, heteroaryl, t-Bu, CH₃O, t-BuO, CH₃S, N(alkyl)₂) gives 2,3-disub-stituted thiophenes (6) having X in the 2-position and R in the 3-position.     

Group IB organometallic chemistry : XXXVII. Complex forming reactions of polynuclear arylcopper compounds: CalkP bond cleavage in 1,2-bis(diphenylphosphino)ethane (diphos) by (2-Me2NCH2C6H4)4Cu4 and crystal structure of [(C6H5)2PCu · diphos]2 · 2 C6H6

Molecular weight measurements and microwave titrations indicate that no interaction occurs between tetrameric 2-Me₂NCH₂C₆H₄Cu (Ar₄Cu₄) and the monodentate ligands PPh₃, CH₃CN or pyridine. However, the tetrameric structure Ar₄Cu₄ breaks down upon interaction (1/1 molar ratio ArCu/L) with the bidentate ligands (L) Diphos or cis-DPPEE to give the monomeric 1/1 complexes ArCu · L.Addition of Diphos to ArCu · Diphos or conducting the reaction of Ar₄Cu₄ with Diphos in a 1/2 ratio (ArCu/Diphos) gives rise to a C_alkP bond cleavage reaction resulting in the formation of dimeric (Ph₂PCu · Diphos)₂ · 2 C₆H₆, ArH and Ph₂PCHCH₂.The molecular structure of (Ph₂PCu · Diphos)₂ · 2 C₆H₆, has been determined by a single-crystal X-ray diffraction study. Crystals are monoclinic, space group P2₁/c and have Z  2 in a unit cell of dimensions a  12.997(6), b  12.669(7), c  22.839(9) Å and β  94.48(4)°. The structure was refined to R  0.048 for 3048 independent reflections. The four copper atoms in the dimer are held together by two Ph₂P bridges. The bonding in the dimer is discussed.     

Highly active and stereoselective olefin polymerization catalysts generated by the transfer-epimetallation of olefins or acetylenes with dialkyltitanium(IV) complexes: three-membered metallocycles as active catalyst sites‡

Efficient transfer-epimetallations of simple olefins and acetylenes by R₂TiL₂ reagents (R = Buⁿ, Bu^t; L = X) are readily achieved in THF at −78°C to generate titanacyclopropa(e)ne intermediates, readily capable of inserting various unsaturated addends (olefin, acetylene, nitrile). Analogous epimetallations conducted in hydrocarbons lead to the isotactic stereoselective polymerization of 1-alkenes and the cyclotrimerization of acetylenes. In place of the widely accepted Arlman-Cossee model for the active catalytic site, namely a Ti-C bond on the TiCl₃ crystal lattice, the 2-substituted-1-halotitanacyclopropyl cation formed in hydrocarbon media is proposed as the active site for stereoselective olefin polymerization.     

Syntheses,Structures and Spectroscopic Studies of Dimolybdenum Complexes Containing Bridging Butyrate and Phosphine Ligands

By reactions of Mo₂(O₂CPrⁿ)X₂(PPh₃)₂ (X = Cl, 1 ; X = Br, 2 ) with Ph₂PCH₂CH₂P(Ph)CH₂CH₂PPh₂ (etp) in CH₂X₂, the quadruply bonded complexes containing bridging butyrate and tridentate phosphine ligands of the type Mo₂(O₂CPrⁿ)X₃(η³‐etp) (X = Cl, 3 ; X = Br, 4 ) were prepared. Their UV‐vis and³¹P{¹H}‐NMR spectra have been recorded and the structures of 1 and 2 have been determined by X‐ray crystallography. Crystal data for 1 : space group P2₁/c, a = 9.708 (2)Å, b = 18.491 (4)Å, c= 12.688 (3)Å, β = 110.76 (3)°, V = 2130 ų, Z = 2, with final residuals R = 0.0441 and Rw = 0.0519. Crystal data for 2 : space group P2₁/c, a = 9.737 (1)Å, b = 18.632(1)Å, c = 12.680(1)Å, β= 110.27 (1)°,V = 2158.2 (3) ų, Z = 2, with final residuals R = 0.0322 and Rw = 0.0481. The δ → δ* transition energies, ³¹P{¹H}‐NMR chemical shifts and the coupling constants are dependent on the natures of the halogen atoms and the carboxylate ligands. The through metal‐metal couplings |³J_{P‐Mo‐Mo‐P}| for complexes of the type Mo₂(O₂CR)X₃(η³‐P₃), which contain η³‐polydentate phosphine ligands are about 20 ± 2 Hz.     

New heteroorganic betaines containing the (+)E15—C—E14—X(–) and (+)E15—C—E14(–) structural fragments (E15 = P,As; E14 = Si,Ge, Sn; X = C,S, O,NR)

The review surveys the data on the reactions of phosphorus and arsenic ylides with compounds containing E=X bonds (E = C, Si, Ge, or Sn; X = C or S), cyclic oligomers (R₂ES)_n (n = 2 or 3), and heavier analogs of carbenes. These reactions give rise to two new classes of heteroorganic betaines containing the ⁽⁺⁾E¹⁵—C—E¹⁴—X^(–) (I) and ⁽⁺⁾E¹⁵—C—E^14(–) (II) (E¹⁵ = P or As; E¹⁴ = Si, Ge, or Sn; X = C or S) structural fragments. Procedures for the synthesis of these compounds, their reactivities, the X-ray diffraction structures, and the electronic structures established by high-level quantum-chemical calculations are considered in detail. The carbon analogs of betaines of type I, viz., compounds bearing the ⁽⁺⁾P—C—C—X^(–) fragment (III), are also discussed. The latter were long considered as possible intermediates in the reactions of compounds containing the polar C=X bond (X = C, O, S, NR, etc.) with phosphorus ylides (classical Wittig and Corey—Chaykovsky reactions and related processes).     

Kationen mit Xenon—Kohlenstoff-Bindung. 4. Salze mit monosubstituiertem Phenylxenon-Kation: Darstellung,Stabilität und Reaktivität

Cations with Xenon-Carbon Bonds. 4 Salts with Monosubstituted Phenyl Xenon Cation: Preparation, Stability and Reactivity . Nucleophilic fluorine aryl substitution reactions with monosubstituted phenylboranes (X? C₆H₄)₃B and fluorophenylboranes (X? C₆H₄)_nBF_3?n (n = 1 and 2; X = m-F, p-F, m-CF₃ and p-CF₃) on XeF₂ lead to the formation of [X? C₆H₄Xe]⁺ salts with arylfluoroborate anions [(X? C₆H₄)_nBF_4?n]^? (n = 2, 1 and 0). Their thermal behaviour, their spectroscopic properties and first investigations concerning their reactivity are reported.     

Ion–Molecule Reactions of “Rollover” Cyclometalated [Pt(bipy−H)]+ (bipy=2,2′‐bipyridine) with Dimethyl Ether in Comparison with Dimethyl Sulfide: An Experimental/Computational Study

The ion–molecule reactions of dimethyl ether with cyclometalated [Pt(bipy?H)]⁺ were investigated in gas‐phase experiments, complemented by DFT methods, and compared with the previously reported ion–molecule reactions with its sulfur analogue. The initial step corresponds in both cases to a platinum‐mediated transfer of a hydrogen atom from the ether to the (bipy?H) ligand, and three‐membered oxygen‐ and sulfur‐containing metallacycles serve as key intermediates. Oxidative C? C bond coupling (“dehydrosulfurization”), which dominates the gas‐phase ion chemistry of the [Pt(bipy?H)]⁺ ion with dimethyl sulfide, is practically absent for dimethyl ether. The competition in the formation of C₂H₄ and CH₂X (X=O, S) in the reactions of [Pt(bipy?H)]⁺ with (CH₃)₂X (X=O, S) as well as the extensive H/D exchange observed in the [Pt(bipy?H)]⁺/(CH₃)₂O system are explained in terms of the corresponding potential‐energy surfaces.     

Dichlorosilylene and dichlorogermylene transfer to alkylidenephosphanes

The detection of Me₃GeSiCl₃, a product from the Si₂Cl₆ cleavage of trimethylgermylphosphanes, as a useful new source of SiCl₂ moieties, as well as new trapping reactions of SiCl₂ and GeCl₂ with functional alkylidenephosphanes (Me₃Si)₂CPX (X = halide or dialkylphosphanyl [PRR^′; R = i-propyl, R^′ = t-butyl]) are reviewed. In the primary step of the reactions, insertion into the P-X bond is competing with addition to the PC bond. SiCl₂ and GeCl₂ insertions are followed by dimerisation reactions leading to new highly functional P-phosphanylalkylidenephosphanes, that may rearrange to diphosphenes like (XCl₂Si)(Me₃Si)₂C-PP-C(SiMe₃)₂SiCl₂X (X = F, Cl, P-i-Pr₂) or (Cl₃Ge)(Me₃Si)₂C-PP-C(SiMe₃)₂GeCl₂PRR^′ or/and react further with SiCl₂ or GeCl₂. Reaction of (Me₃Si)₂CP-PRR^′ (R = i-propyl, R^′ = t-butyl) with Me₃GeSiCl₃ leads in a very selective fashion to a complete PC double bond cleavage by unique double SiCl₂ addition with formation of a stable P-phosphanylphosphadisiletane.     

Syntheses,Structures and Spectroscopic Studies of Quadruply Bonded Complexes Containing Bridging Acetate and η3-etp Ligands (etp = Ph2PCH2CH2P(Ph)CH2CH2PPh2)

The quadruply bonded complexes containing bridging acetate and polydentate phosphine ligands of the type Mo₂(O₂CCR₃)X_J(η³-etp) (R = H, X = Br, 1; R = F, X = CI, 2; R = F, X = Br, 3; etp = Ph₂PCH₂CH₂P(Ph)CH₂CH₂PPh₂) were prepared by reactions of Mo₂(O₂CCR₃)X₂(PPh₃)₂ with etp in CH₂X₂. Their UV-vis and ³¹P{¹H}-NMR spectra have been recorded, and the structure of 1 has been determined by X-ray crystallography. Crystal data for 1·2CH₂Br₂: space group P2₁/c, a = 13.924(7) Å, b = 21.157(4) Å, c = 14.427(5) Å, β = 101.82(3)°, V = 4159(2) ų, Z = 4, with final residuals R = 0.0797 and Rw = 0.0793. The absorption wavelengths of the δ → δ* transitions and the chemical shifts and the coupling constants of the ³¹P{¹H}-NMR spectra of these complexes are dependent on the natures of the halogen atoms and the acetate ligands.     

Synthese und Eigenschaften von Bis(Dimethylarsino)-aminen

Synthesis and Properties of Bis(dimethylarsino) Amines Primary amines react with cacodyl halides (CH₃)₂AsX (X = Cl, J) under formation of Bis(dimethylarsino)amines RN[As(CH₃)₂]₂. Nine amines were prepared. The compounds were characterized by IR, ¹H-nmr and mass-spectroscopy. In the reactions with acid molecules cleavage of the As? N bond was observed. Formation of amine RNH₂ or ammoniumsalt (RNH₃)X and cacodyl derivates took place in all cases. The reactions of the arsinoamines with some carbonyles are reported.     

Synthese von methyldihalogenarsinen CH3AsXY mit verschiedenen halogenen XY

The reactions of the methylhalogenodimethylaminoarsines CH₃As-[N(CH₃)₂]X (X  F, Cl, Br, I) with HY (Y = Cl, Br) yield the methyldihalogenoarsines CH₃AsXY. The compounds CH₃As[N(CH₃)₂]X are prepared by the reactions of CH₃AsCl₂ with HN(CH₃)₂, CH₃As[N(CH₃)₂]₂ with HX (X = Cl, Br) and by exchange reactions between CH₃As[N(CH₃)₂]₂ and CH₃AsX₂ (X = F, Cl, Br, I).     

Synthesis,structures, and electrocatalytic properties of phosphine-monodentate, −chelate,and -bridge diiron 2,2-dimethylpropanedithiolate complexes related to [FeFe]-hydrogenases

To further extend diiron subsite models of [FeFe]-hydrogenases, the various substitutions of all-carbonyl diiron complex Fe₂(μ-Me₂pdt)(CO)₆ ( A , Me₂pdt = (SCH₂)₂CMe₂) with monophosphines or small bite-angle diphosphines are studied as follows. Firstly, the monodentate complexes Fe₂(μ-Me₂pdt)(CO)₅{κ¹-P(C₆H₄R-p)₃} [R = Me ( 1a ) and Cl ( 1b )] and Fe₂(μ-Me₂pdt)(CO)₅{κ¹-Ph₂PX'} [X' = NHPh ( 2a ) and CH₂PPh₂ ( 2b )] are readily afforded through the Me₃NO-assisted reactions of A with monophosphines P(C₆H₄R-p)₃ (R = Me, Cl) and diphosphines (Ph₂P)₂X (X = NPh, CH₂ (dppm)) in MeCN at room temperature, respectively. Secondly, the chelate complexes Fe₂(μ-Me₂pdt)(CO)₄(κ²-(Ph₂P)₂X) [X = NPh ( 3a ) and NBuⁿ ( 3b )] can be efficiently prepared by the UV-irradiated reactions of A with small bite-angle diphosphines (Ph₂P)₂X (X = NPh, NBuⁿ) in toluene. Thirdly, the bridge complexes Fe₂(μ-Me₂pdt)(CO)₄(μ-(Ph₂P)₂X) [X = NPh ( 4a ) and CH₂ ( 4b )] are well obtained from the refluxing solutions of A and diphosphines (Ph₂P)₂X (X = NPh, CH₂) in xylene. Rarely, the diphosphine-bridge complex 4b may be produced in low yield via the UV-irradiated solutions of A and the dppm ligand in toluene emitting at 365 nm. Eight new complexes obtained above have been well characterized by using element analysis, FT-IR, NMR (¹H, ³¹P) spectroscopies, and particularly for 1a , 1b , 2a , 3b , 4a , 4b by X-ray crystallography. Meanwhile, the electrochemical and electrocatalytic properties of three representative complexes 2a , 3a , and 4a with pendant N-phenyl groups are investigated and compared by using cyclic voltammetry (CV) in the absence and presence of trifluoroacetic acid (TFA) as a proton source, indicating that they are all found to be active for electrocatalytic proton reduction to hydrogen (H₂).     

Synthesis and transformations of metallacycles. 29. Direct alumination of olefins, conjugated dienes, and acetylenes with alkylhaloalanes catalyzed by Zr and Ti complexes

Catalytic methods were developed for the synthesis of acyclic 1,2- and 1,4-dialuminum compounds by the reactions of olefins, dienes, or acetylenes with R₂AlCl (R = Et, Et₂N, (cyclo-C₆H₁₁)₂N, BuⁿO, or n-C₆H₁₃O) in the presence of Ti- or Zr-containing complex catalysts and magnesium metal as an acceptor of chloride ions.     

An interdependent site exchange process of some 16-electron bis-acetylene-molybdenum complexes

The propeller-like rotations of each of the coordinated acetylenes in the 16-electron complex (η⁵-C₅H₅)Mo(PhCCMe)₂Cl are not independent and the barrier to rotation of one of the acetylenes is influenced by the orientation of the other. The barrier for the propeller-like rotation of the coordinated acetylenes in the similar cationic bis-acetylene complex, [(η⁵-C₅H₅)Mo(HOH₂CCCCH₂OH)₂CO]Cl is >5 kcal/mol higher than in the neutral bis-acetylene (η₅-C₅H₅)Mo(PhCCCH₃)₂Cl.