Effect of substituents on the polarographic behaviour of α-arylhydrazononitriles: Further evidence for the mechanism of polarographic reduction of α-arylhydrazononitriles

The polarographic behaviour of the α-arylhydrazonomesoxalonitrile derivatives (IIb-i) and of 2-arylhydrazono-3-keto-3-phenylpropionitriles (IIIb-f) was investigated. With the exception of the nitro-substituted derivatives IIh, i and IIIf all the investigated compounds showed polarographic waves similar to that of their respective parent compounds IIa and IIIa. The m-nitro derivatives IIh and IIIf were firstly reduced in a 4 e wave to the corresponding hydroxylamino derivatives which were subsequently reduced in the manner common to other α-arylhydrazononitriles. On the other hand, the p-nitro derivative IIi was first reduced to the hydroxylamino derivative which then lost water to yield the corresponding quinoneimine. Reduction of the latter product in a 2 e wave gave the p-amino derivative IIe, which then underwent 4 e reduction to p-phenylenediamine and aminomalonitrile. The E_1/2 values corresponding to reduction of the arylhydrazonic moiety of compounds IIa-i and IIIa-f at different pH values were correlated to Hammett's different sigma sets. Analysis of the results provided evidence for the suggested mechanism for reduction of these compounds.     

Ion Implantation in Semiconductors: Science and Technology,S. Namba (Ed.), Plenum Press,New York (1975)

A study has been made of the polarographic behaviour of 4-thiouracil and its N-methylated derivatives, and of 4-thiouridine. Similar electrochemical properties are exhibited by all the compounds with a 2-keto-4-thione structure. In acid medium they give a typical catalytic hydrogen discharge wave, which disappears completely at pH values above 6. At pH values above 4.2 a second catalytic wave appears. Maximal catalytic activity is exhibited at pH 7.1, and decreases with increasing pH. Both catalytic waves possess pronounced surface characteristics, most likely due to adsorption of the molecules with differing orientations on the electrode surface. The second catalytic wave overlaps the reduction wave, which is placed in evidence under conditions where the catalytic effect is absent. The reduction wave is a 4e^?/4H⁺ process involving reduction of the 4-thiouracil ring to 5,6-dihydropyrimidone-2. The same product is formed by a 2e^?/2H⁺ reduction of 5,6-dihydro-4-thiouracil. The potential applications of the electrochemical properties of 4-thiouracil to studies on tRNA structure are discussed.     

Pyrazoles as building blocks in heterocyclic synthesis: Synthesis of pyrazolo [3,4-d]pyrimidine, pyrazolo[3,4-e][1,4]diazepine, pyrazolo [3,4-d][1,2,3]triazine and pyrolo [4,3-e][1,2,4]triazolo[1,5-c]pyrimidine derivatives

Several new pyrazolo[3,4-d]pyrimidine, pyrazolo[3,4-e][1,4]diazepine, pyrazolo[3,4-d][1,2,3]triazine and pyrolo[4,3-e][1,2,4]triazolo[1,5-c]pyrimidine derivatives were prepared by the reaction of the corresponding 5-amino-pyrazole-4-carbonitrile derivative with different organic reagents under different reaction conditions. Using IR, ¹H NMR, and mass spectra we have characterized all new compounds.     

One- versus two-electron reaction pathways in the electrocatalytic reduction of benzyl bromide at silver cathodes

The electrocatalytic reduction of benzyl bromide at a silver cathode has been investigated in acetonitrile in the absence and presence of acids, using cyclic voltammetry (CV) and controlled-potential electrolysis (CPE). CV gives rise to two reduction waves, which represent the dissociative 1e⁻ reduction of PhCH₂Br to and Br⁻ followed by a further reduction of the benzyl radical to at more negative potentials. The charge stoichiometry (1e⁻ vs 2e⁻/molecule) and product distribution depend on the applied potential and reaction medium. In the absence of added acids, the reduction of PhCH₂Br at potentials of the first wave is a 1e⁻ process mainly yielding bibenzyl, whereas toluene becomes the principal product at potentials beyond the second wave. The addition of acids strongly modifies the dependence of selectivity on the applied potential. The presence of a strong acid changes the mechanism of the process, which now becomes a 2e⁻ reduction to toluene, even at potentials corresponding to the first reduction wave.     

Polarographic investigations of some copper chelates of 3-arylazopentane-2,4-diones

The polarographic curves of the copper chelates of twelve substituted 3-arylazopentane-2, 4-diones exhibit single 4e diffusion-controlled irreversible waves between pH 2 and 11. The two azo groups in the compound are equivalent so that only a single 4e wave is obtained; no copper reduction wave is observed. The polarographic behaviour differs from that of p-bisazobenzene. There is a linear correlation between the E$\text{1}\text{2}$ values and the Hammett substituent constants.     

The electrochemical behavior of Os(II) complexes with α,α′-bipyridine and o-phenanthroline in non-aqueous solvents

The electrode reactions of Os(II) complexes with α,α′-bipyridine and o-phenanthroline have been studied in non aqueous solvents. Tris bipyridine and tris phenanthroline complexes of Os(II) give one-step oxidation waves and three-step reduction waves, while bis bipyridine complexes of Os(II) containing py₂, en, CN₂, Cl₂ and Br₂ as mixed ligands give one-step oxidation waves and two-step reduction waves. Most of these waves correspond to reversible single electron transfers. It is noticed that the half-wave potentials or the peak potentials of bis bipyridine complexes are shifted to more negative direction than those of the tris complex in both oxidation and reduction processes. This is attributable to less electron with drawing nature of substituted ligands than bipyridine. These potential data, the shifts of E_1/2 or E_p from those of tris complexes, and δE*, the potential difference between two consecutive single electron waves, are discussed in terms of molecular orbital scheme.     

Electrochemical reduction of halogenated pyrimidines at mercury cathodes in acetonitrile

Cyclic voltammetry and controlled-potential electrolysis have been employed to investigate the reduction of some mono-, di-, tri-, and tetrahalopyrimidines at mercury cathodes in acetonitrile containing tetramethylammonium tetrafluoroborate. Two irreversible cyclic voltammetric waves are observed for reduction of 2-bromo-, 5-bromo-, and 2-chloropyrimidine; the first wave is due to cleavage of the carbon---halogen bond, and the second wave is attributable to reduction of pyrimidine. Cyclic voltammograms for 2,4-dichloro- and 4,6-dichloropyrimidine exhibit three cathodic waves, whereas that for 2,4,6-trichloropyrimidine shows four cathodic waves, arising from sequential cleavage of carbon---chlorine bonds as well as the reduction of pyrimidine. For the reduction of 2,4,5,6-tetrachloropyrimidine, a cyclic voltammogram exhibits four major irreversible cathodic waves corresponding to the cleavage of carbon---chlorine bonds, but the wave for reduction of pyrimidine is poorly defined. Bulk electrolyses of halopyrimidines at potentials for different stages of reduction lead to products that are consistent with expectations based upon cyclic voltammetry. In addition, our findings agree well with theoretical calculations of the relative stabilities of the various reduction intermediates. Mechanistic aspects of the reduction of halopyrimidines are discussed and, using homogeneous redox catalysis, we have determined the lifetimes of the electrogenerated radical-anions of 2-bromo- and 2-chloropyrimidine.     

Electrochemical characterization of small organic hole-transport molecules based on the triphenylamine unit

A series of substituted triphenylamine-containing organic compounds are synthesized and their hole-transport properties are examined by electrochemical and spectroelectrochemical methods. Several substituted tirphenylamines exhibited irreversible electron-transfer reactions both in the oxidative and reductive scan. On the other hand, the cyclic voltammograms of the p-phenylenediamine series are well defined. N,N^′-bis(4-nitrophenyl)-N,N^′-diphenyl-1,4-phenylenediamine (NPD) exhibited two reversible oxidation redox couples at +1.00 and +1.28 V vs. Ag/AgCl in dichloromethane solution. There is one reversible reduction redox couple at −1.12 V and one irreversible wave with E_p,c at −1.87 V. Cyano-substituted p-phenylenediamine (CPD) exhibited similar oxidation redox couples. Amino-substituted p-phenylenediamine (APD) is easier to oxidize than NPD and CPD. APD exhibits two reversible oxidation redox couples at +0.40 and +0.70 V and two extra irreversible oxidation waves at +1.26 and +1.52 V. Optically transparent thin-layer electrode (OTTLE) coupled with UV/Vis/NIR spectroscopy was used to examine the oxidation products of the above reactions. The electrogenerated cation and dication of the substituted p-phenylenediamine are very stable in the spectroelectrochemical studies. Oxidation of the compound APD exhibited a distinguished absorption pattern, which is different from those of compound NPD and compound CPD.     

Reactivite des β-cyclopropyl α-enones—I: Etude des transferts electroniques par voltametrie cyclique et de la reduction par l'electron solvate dans l'ammoniac liquide

Species produced by electron transfer to variously substituted bicyclo[3.1.0]hex-3-en-2-ones provide a better insight into the origin of 1,6-addition products sometimes observed by reaction of lithium diorganocuprates with β-cyclopropyl α-enones. Cyclic voltammetry of eight such bicyclohexenones show that the half-lives of the corresponding anion radicals are very short (t_{$\text{1}\text{2}$}?10^?4s) except when the initial molecule is phenyl substituted at C-4. In such cases the anion radicals are very stable (t_{$\text{1}\text{2}$}?6s) owing to the greater charge delocalization and we observe a second wave corresponding to the formation of the Dianion. The reduction of the same substrates by the solvated electron in liquid ammonia exhibits the same difference of behaviour. The molecules giving strongly reactive anion radicals only lead to the straight-forward product expected by conjugate reduction; while the 4-phenyl substituted substrates yield a mixture of products from normal conjugate reduction and rearrangement. This correlation strongly suggest that these last products arise from the rearrangement of the dianion.     

The important role of surface area in the electrochemical behaviour of RuO2 electrodes

5-Alkyl substituted barbituric acids are electrochemically oxidized at the pyrolytic graphite electrode by way of a single, major, 1e voltammetric oxidation peak to form a barbiturate radical. This dimerizes to give the corresponding 5,5′-substituted hydurilic acid. Under conditions of controlled potential electrolysis the reaction proceeds in very high yield and the hydurilic acid derivative may be readily separated and purified.     

Thienooxazolopyrimidinium salts. Reaction of 1-bromomethyl-5-oxo-4-phenyl-1,2,4,5,6,7,8,9-octahydro[1]benzothieno-[3,2-<Emphasis Type="Italic">e</Emphasis>][1,3]oxazolo[3,2-<Emphasis Type="Italic">a</Emphasis>]pyrimidin-11-ium bromide with oxygen-centered nucleophiles

Reactions of [1]benzothieno[3,2-e][1,3]oxazolo[3,2-a]pyrimidin-11-ium bromide with oxygen-containing nucleophiles involve opening of the dihydrooxazole ring and lead to the formation of new functionally substituted thieno[2,3]-d]pyrimidine derivatives.     

The reduction of carbonyl compounds at carbon electrodes in acidic water/methanol mixtures

The voltammetry of benzaldehyde in acidic methanol/water mixtures is shown to depend strongly on the cathode material. At pH 1, benzaldehyde always reduces in two le⁻ steps and the first step is always reversible. On the other hand, the potential for the second reduction step varies strongly with cathode material; at vitreous carbon, the second step occurs at much more negative potential than at lead or mercury, giving much better resolution of the two reduction waves. In citrate buffer, pH 4, the first reduction step is shifted negative; as a result, at lead a single 2e⁻ wave is seen but at vitreous carbon, two 1e⁻ steps are still observed. These changes in voltammetry with cathode material are shown to be general for both aldehydes and ketones.     

Synthesis of thietanyl-substituted pyrimidine-2,4(1H,3H)-dions

Reactions of 6-methylpyrimidine-2,4(1H,3H)-dione or 5-hydroxy-6-methyl-pyrimidine-2,4(1H,3H)-dione with 2-chloromethylthiirane afforded the corresponding substituted 1-(thietan-3-yl)pyrimidine-2,4(1H,3H)-diones. The calculations in the framework of approximations PBE/3z, B3LYP/6-31G++(d,p) and MP2/6-31G++(d,p) showed that the alkylation occurred at the atom N¹ of the pyrimidine ring.     

The CuII−CuI−Cu0(Hg) system in the presence of benzotriazole: Part I. A polarographic investigation

A polarographic investigation of Cu^II electroreduction from solutions of benzotriazole (BTA) of pH from 1 to 3 at a dropping mercury electrode shows the presence of two successive adsorption waves of equal height (waves Ic and IIIc) due, respectively, to the formation and to the subsequent dissolution of an adsorbed film of a Cu^I compound. The dependence of the half-wave potential of wave IIIc, which is polarographically reversible, upon pH and BTA concentration indicates that the adsorbed film has the composition [Cu^I(BTA^?)], where BTA^? denotes the deprotonated anionic form of benzotriazole. Moreover, the maximum height of wave IIIc indicates that this film is one monolayer thick. A third cathodic wave (wave IIc), lying between waves Ic and IIIc, stems from the reduction to the metal state of the Cu^II ions diffusing from the bulk solution. Copper(0) oxidation at dropping amalgam electrodes in BTA solutions yields two successive adsorption waves (waves Ia and IIa). Wave Ia is due to the same electrode process, Cu⁰ (Hg)+BTA?Cu^I(BTA^?)+H⁺+e, responsible for the cathodic wave IIIc. On the other hand, wave IIa is due to the formation of roughly two adsorbed monolayers of [Cu^I(BTA^?)] upon that formed along wave Ia.     

Efficient regioselective heterocyclisation leading to fluorescent fused pyrazine derivatives

The regioselective syntheses of substituted pyrrolo[2,3-b]quinoxaline, pyrido[2,3-b]pyrrolo[2,3-e]pyrazine, pyrido[2,3-b]pyrrolo[3,2-e]pyrazine and pyrido[3,4-b]pyrrolo[3,2-e]pyrazine are reported. Differential reactivity between two amino groups in ortho-diaminopyridine can be exploited to obtain new regio-defined unsymmetrical pyridopyrrolopyrazine derivatives. Weak electron-donating methyl or moderately electron-withdrawing carboxylic groups attached to the aromatic ortho-diamines reduce the regioselectivity of obtaining unsymmetrical substituted pyrrolo[2,3-b]quinoxaline. The fluorescence properties of the resultant 1-alkyl pyridopyrrolopyrazine and substituted pyrrolo[2,3-b]quinoxaline derivatives are presented.     

Pyrimidines. XIX. Pyrimido[4,5-e]dihydro-1,3-oxazines and related compounds

A number of 2-substituted 4,5-dihydroxy-6-(substituted aminomethyl)pyrimidines (VIII) were prepared from the corresponding 2-substituted 4,5-dihydroxypyrimidines (VII) by a new pyrimidine Mannich reaction. The structure of VIII was proved by an independent synthesis. Further study of this reaction led to the synthesis of a new class of compounds: the pyrimido[4,5-e]dihydro-1,3-oxazines (VI).     

Mechanism of electrochemical reduction of oxamide analytical applications

Oxamide is electrochemically reduced at mercury electrodes between pH 5.6 and 11.6. The overall mechanism proceeds by an initial 2e reduction of the 1,2-carbonyl groups of oxamide to give a dianion. This then protonates, rearranges, and loses ammonia to glyoxylamide, which is reduced in a further 2e/2H⁺ reaction giving glycolamide as the ultimate product. The reaction thus proceeds by a typical e.c.e. mechanism. The overall homogeneous rate contant for the chemical reaction(s) interposed between the two charge-transfer steps was measured by peak voltammetric, potentiostatic and d.c. polarographic methods. The d.c. polarographic wave of oxamide between pH 5.6 and 11 provides the basis for a very simple analytical method for the determination of oxamide.     

Cyclodehydrogenation of hetero-oligophenylenes

Pyrimidyl-penta-phenylbenzenes have been synthesized by Diels-Alder addition of phenylethynylpyrimidines and tetraphenylcyclopentadienones under microwave irradiation. Scholl reactions of these compounds led to two types of hetero polyaromatic hydrocarbons: (a) partial cyclization by creation of two C-C bonds ortho to the pyrimidine nitrogen atoms gave substituted tribenzo[e,gh,j]perimidine (N-1/3HSB) in high yields; (b) when the position 2 of the pyrimidine ring was substituted by a tert-butyl group, the Scholl reaction was complete and provided the first example of a diaza-hexa-peri-benzocoronene.     

Synthesis of 4-aminopyrazolo[3,4-d]pyrimidine derivatives from 5-acetyl-6-amino-4-methylsulfanyl- or 5-acetyl-6-amino-4-methylsulfonylpyrimidines

Diacetyl ketene N,S-acetal was used for the synthesis of 5-acetyl-6-amino-4-methylsulfanylpyrimidines substituted at the exocyclic nitrogen atom, which were further oxidized with m-chloroperbenzoic acid to the corresponding methylsulfonylpyrimidines. Reactions of hydrazines with these pyrimidines containing vicinal Ac and MeS (or MeSO₂) groups were used for the preparation of new 4-aminopyrazolo[3,4-d]pyrimidine derivatives.     

Asymmetric Synthesis of Some Chiral Aryl and Hetero Aryl-Substituted β-, γ-, δ-Hydroxy Esters

Sixteen chiral β-, γ-, and δ-hydroxy esters with aryl, substituted aryl, and heteroaryl groups 2a–2s were synthesized by the asymmetric reduction of their corresponding keto esters 1a–1s as chiral pure reference compounds and starting materials. The asymmetric reduction was achieved by (R)-Me-CBS-oxazaborolidine. Ten new chiral γ- and δ-hydroxy esters 2d, 2e, and 2j–2s were obtained with high ee values and characterized by infrared, NMR (¹H and ¹³C), mass spectrometry, chiral high-performance liquid chromatography, and specific rotation.