SYNTHESIS OF DIOLS BEARING PHOSPHONATE GROUPS PART III. THIOLS USED AS STARTING MATERIALS

This article describes the synthesis of diols bearing a phosphonated group. The method used is the monoaddition of a thiol on unsaturated compounds. Two ways are possible depending on the species bearing either the phosphonated group or the diol function. First we added a thiol bearing a diol function onto dialkylallylphosphonates. Then a thiol bearing phosphonated groups was added onto an allylic diol. On the other hand we compared radical and UV additions. We also compared the reactivity of similar phosphonated compounds (dimethyl and diethyl phosphonates). All the reactions gave very good yields and the different products have been analyzed by NMR studies. Finally, we succeeded in the synthesis of the corresponding phosphonic diacids by the bromosilane method.     

The strength of parallel-displaced arene-arene interactions in chloroform

[reaction: see text] Triptycene-derived compounds have been prepared to serve as conformational equilibrium reporters for direct measurements of arene-arene interactions in the parallel-displaced orientation. A series of such compounds bearing arenes with different substituents were synthesized, and the ratios of the syn and anti conformers were determined by variable-temperature NMR spectroscopy. The syn conformer allows attached arenes to interact with each other while the anti conformer does not. The free energies derived from the syn/anti ratios in chloroform range from slightly positive (0.2 kcal/mol) to considerably negative (-0.98 kcal mol) values. The interactions between the arenes bearing electron-donating groups (EDG) are either negligible or slightly repulsive, while the interactions between arenes bearing electron-withdrawing groups (EWG) are attractive. Intermediate free energy values are obtained for those compounds bearing arenes with one EDG and one EWG.     

Indium-mediated radical cyclization of iodoalkenes and iodoalkynes with and without allylic and propargylic leaving groups

Upon treatment with In and I₂, mono-substituted alkenes having an iodine substituent at the δ-position of the tether gave the corresponding iodinated cyclic compounds, whereas di- and tri-substituted alkenes gave the corresponding hydroxylated cyclic compounds. Alkenes bearing leaving groups at the allylic position were transformed only to the corresponding vinyl substituted cyclic compounds. On the other hand, alkynes bearing good leaving groups at the propargylic position gave allenic products selectively.     

Reactivity of nucleophilic uracil derivatives

The reactivity of uracil derivatives bearing acidic methylene groups at N1 was investigated. On treatment with strong base, compounds with nitrile as the activating group underwent extensive dimerisation to give new tricyclic systems. Ester-activated compounds also produced dimers in the absence of an external electrophile, but their monomeric carbanions could be trapped by prompt addition of benzyl bromide to give normally alkylated products.     

Synthesis and reactions of novel pyridine-bridged-2,6-bis-carboxamide hydrazones

A number of new hydrazones bearing pyridine-2,6-bis-carboxamides were synthesized and elucidated by spectral and elemental analysis. 2,6-Bis-carboxamide pyridine hydrazide was treated with various active carbonyl compounds containing formyl or methanoyl groups to give hydrazones and Schiff bases.     

Symmetric and unsymmetric "dumbbells" of Ru2-alkynyl units via C-C bond formation reactions

Oxidative homocoupling (Glaser) reaction of Ru2 compounds bearing peripheral ethyne resulted in symmetric dimers. Cross-coupling (Sonogashira) reaction between Ru2 compounds bearing peripheral iodo and ethyne groups yielded an unsymmetric dimer. Voltammetric data indicated that Ru2 units in the symmetric dimers are noninteracting, and the unsymmetric dimer is best described as a weakly coupled push-pull compound.     

Silylated iminophosphonates: Novel reactive synthons for the preparation of fluorinated aminophosphonates and aminophosphonic acids

A convenient synthetic approach towards previously unknown N- and N,O-silylated α-iminophosphonates bearing fluoroalkyl groups at the imine C atom was developed. The synthetic potential of the compounds was demonstrated by their easy functionalization and the straightforward preparation of biorelevant aminophosphonates and free aminophosphonic acids with heterocyclic residues in the α-position.     

Synthesis of N-(arylmethyl)diethanolamines and of other pyrenediols: Addition polymerizations of pyrenyl monomers

N-(Arylmethyl)diethanolamines and other spaced dihydroxy compounds bearing pyrenyl groups were prepared using benzotriazole as a synthetic auxiliary. The potential of these diols as precursors for the preparation of condensation polymers containing pendant polycyclic aryl groups was illustrated by reaction of the pyrenyl derivatives with diisocyanates which afforded the corresponding polyurethane polymers.     

Novel Rh catalysis in cross-coupling between alkyl halides and arylzinc compounds possessing ortho-COX (X = OR, NMe2, or Ph) groups

[reaction: see text] Rh-dppf was found to be an efficient catalyst for the cross-coupling between primary alkyl halides bearing beta-hydrogens and arylzinc compounds possessing carbonyl groups such as ester, amide, or ketone at the ortho position. Various functional groups such as ester, nitrile, or acyloxylate moieties on the halides were tolerated under the catalysis conditions. Arylzinc compounds free of ortho-carbonyl groups reacted well with ethyl 3-iodopropanoate, suggesting that the essential intramolecular interaction between carbonyl groups and Rh promotes the reductive elimination.     

4-Azidotetronic Acids: A New Class of Azido Derivatives

4-Azidotetronic derivatives bearing different substituent groups on the carbon atom in position 3 were easily obtained by reaction of the corresponding 4-bromotetronic compounds with sodium azide in methanol at room temperature.     

Synthesis, characterization and fluorescent property evaluation of 1,3,5-triaryl-2-pyrazolines

A series of 1,3,5-triaryl-2-pyrazolines was synthesized by dissolving the corresponding 4-alkoxychalcones in glacial acetic acid containing a few drops of concentrated hydrochloric acid. This step was followed by the addition of (3,4-dimethylphenyl) hydrazaine hydrochloride. Finally the target compounds were precipitated by pouring the reaction mixture onto crushed ice. The structures of the synthesized compounds were established by physicochemical and spectroscopic methods. The 1,3,5-triaryl-2-pyrazolines bearing homologous alkoxy groups were found to possess fluorescence properties in the blue region of the visible spectrum when irradiated with ultraviolet radiation. The fluorescent behavior of these compounds was studied by UV-Vis and emission spectroscopy, performed at room temperature.     

Preparation of ZnO Nanowires and Study of Surface‐adsorbate Interaction by Fourier‐Transform Infrared Spectroscopy

To study the surface‐adsorbate properties of ZnO nanowires, a hydrothermal method was modified to grow ZnO nanowires directly on ZnSe, which were then characterized by attenuated total reflection infrared (ATR‐IR) spectroscopy. To prepare ZnO nanowires directly on ATR sensing element of ZnSe, ZnO seed layers were first formed by annealing of ZnO seeds on ZnSe surfaces. The ZnO seed layers then were exposed to growth solution, forming ZnO nanowires directly on the ATR crystals. The interaction properties of the resulting surfaces were studied by an ATR‐IR method. The diameter, length and distribution of the ZnO nanowires can be tuned by adjusting the growth conditions, particularly the growing time and the concentrations of reagents. Two surfaces, namely Zn‐rich and Zn‐O ion‐pair surfaces were studied in detail for their adsorption properties toward compounds bearing different functional groups. By examination of several volatile organic compounds (VOCs), it was found that the Zn‐rich surface is less selective and interacts with compounds bearing the functional groups of amino and hydroxyl. The Zn‐O ion‐pair surface is more selective and a much stronger interaction was observed with non‐aromatic amino compounds. These results indicate that the improving of the selectivity of a ZnO‐based sensing device can be achieved by tuning the surface structure of the ZnO nanomaterials.     

1,3-Dipolar cycloadditions of new 2,5-bifunctionalized five-membered cyclic nitrones

A new family of five-membered cyclic nitrones bearing functional groups at positions 2 and 5 were tested in 1,3-cycloadditions with various dipolarophiles. These reactions gave the corresponding cycloadducts as single diastereomers in high yields. The reaction scope was examined, 23 compounds were isolated and fully characterized. The comparison of the reactivity was carried out by a study of reaction conversions while different nitrones or dipolarophiles were used. In addition, the exceptional reactivity of nitrone bearing benzylamino group in position 2 was studied. The formation of the nitrone complex and evaluation of its reactivity in 1,3-DC is presented.     

Synthesis and reactivity of dimethoxy-functionalised Tröger’s base analogues

Tröger’s base analogues were prepared bearing methoxy groups in the 1,7-, 2,8-, 3,9- or 4,10-positions. These compounds were converted to their dihydroxy analogues in excellent yields upon treatment with boron tribromide and the 4,10-dihydroxy analogue could be prepared by directly from 4-hydroxyaniline. The synthetic utility of the dihydroxy-functionalised compounds as building blocks was demonstrated by the synthesis of a dialkoxy and a diester Tröger’s base analogue.     

Syntheses and structures of hypervalent pentacoordinate carbon and boron compounds bearing an anthracene skeleton--elucidation of hypervalent interaction based on X-ray analysis and DFT calculation

Pentacoordinate and tetracoordinate carbon and boron compounds (27, 38, 50-52, 56-61) bearing an anthracene skeleton with two oxygen or nitrogen atoms at the 1,8-positions were synthesized by the use of four newly synthesized tridentate ligand precursors. Several carbon and boron compounds were characterized by X-ray crystallographic analysis, showing that compounds 27, 56-59 bearing an oxygen-donating anthracene skeleton had a trigonal bipyramidal (TBP) pentacoordinate structure with relatively long apical distances (ca. 2.38-2.46 A). Despite the relatively long apical distances, DFT calculation of carbon species 27 and boron species 56 and experimental accurate X-ray electron density distribution analysis of 56 supported the existence of the apical hypervalent bond even though the nature of the hypervalent interaction between the central carbon (or boron) and the donating oxygen atom was relatively weak and ionic. On the other hand, X-ray analysis of compounds 50-52 bearing a nitrogen-donating anthracene skeleton showed unsymmetrical tetracoordinate carbon or boron atom with coordination by only one of the two nitrogen-donating groups. It is interesting to note that, with an oxygen-donating skeleton, the compound 61 having two chlorine atoms on the central boron atom showed a tetracoordinate structure, although the corresponding compound 60 with two fluorine atoms showed a pentacoordinate structure. The B-O distances (av 2.29 A) in 60 were relatively short in comparison with those (av 2.44 A) in 59 having two methoxy groups on the central boron atom, indicating that the B-O interaction became stronger due to the electron-withdrawing nature of the fluorine atoms.     

Triethylamin-mediated addition of 2-aminoethanethiol hydrochloride to chalcones: Synthesis of 3-(2-aminoethylthio)-1-(aryl)-3-(thiophen-2-yl) propan-1-ones and 5,7-diaryl-2,3,6, 7-tetrahydro-1,4-thiazepines

The triethylamin-mediated addition of 2-aminoethanethiol hydrochloride to chalcone analogs was investigated. This addition, bearing a 2-thienyl group at the 3-position, gave the only addition adduct at room temperature in 3 h, whereas the chalcones bearing the 2-furyl group at the 1-position gave an addition-cyclization product (1, 4-thiazepine) in the same conditions. The effect of the groups to the reaction was investigated by changing the 1- and 3-position groups. The chalcones bearing the 2-thienyl group at the 1-position and the others afforded the mixture of products in different ratio at rt for 0.5–24 h. Moreover, the addition–cyclization products (1,4-thiazepine) were obtained under reflux conditions in 36 h. The structures of the synthesized compounds were elucidated by ¹H NMR, ¹³C NMR, infrared, and elemental analysis.     

Infrared analysis of phase transitions in liquid crystal acrylate monomers bearing urethanic groups and cholesteryl as mesogen

An infrared analysis of phase transitions in three enantiotropic liquid crystalline acrylate monomers with different spacer lengths bearing urethane groups and cholesteryl as mesogen was carried out. Through heating and cooling, spectral modifications especially at the level of carbonyl, –NH– and urethane alkoxyl oxygen groups were found. These findings reveal the influence of hydrogen bonding on mesomorphic properties of the studied compounds mentioning that both liquid crystal transitions are evidenced by the spectral changes. For all the compounds studied, the values of the transition temperatures deduced from the spectral modifications are in good agreement with those obtained from DSC measurements.     

Porphyrins bearing arylphosphonic acid tethers for attachment to oxide surfaces

Synthetic molecules bearing phosphonic acid groups can be readily attached to oxide surfaces. As part of a program in molecular-based information storage, we have developed routes for the synthesis of diverse porphyrinic compounds bearing phenylphosphonic acid tethers. The routes enable (1) incorporation of masked phosphonic acid groups in precursors for use in the rational synthesis of porphyrinic compounds and (2) derivatization of porphyrins with masked phosphonic acid groups. The precursors include dipyrromethanes, monoacyldipyrromethanes, and diacyldipyrromethanes. The tert-butyl group has been used to mask the dihydroxyphosphoryl substituent. The di-tert-butyloxyphosphoryl unit is stable to the range of conditions employed in syntheses of porphyrins and multiporphyrin arrays yet can be deprotected under mild conditions (TMS-Cl/TEA or TMS-Br/TEA in refluxing CHCl(3)) that do not cause demetalation of zinc or magnesium porphyrins. The porphyrinic compounds that have been prepared include (1) A(3)B-, trans-AB(2)C-, and ABCD-porphyrins that bear a single phenylphosphonic acid group, (2) a trans-A(2)B(2)-porphyrin bearing two phenylphosphonic acid groups, (3) a chlorin that bears a single phenylphosphonic acid group, and (4) a porphyrin dyad bearing a single phenylphosphonic acid group. For selected porphyrin-phosphonic acids, the electrochemical characteristics have been investigated for molecules tethered to SiO(2) surfaces grown on doped Si. The voltammetric behavior indicates that the porphyrin-phosphonic acids form robust, electrically well-behaved monolayers on the oxide surface.     

1,2,5-Triphenylpyrrole Derivatives with Dual Intense Photoluminescence in Both Solution and the Solid State: Solvatochromism and Polymorphic Luminescence Properties

Five organic luminophores, 1,2,5-triphenylpyrrole (TPP) derivatives 3 a – e bearing electron-withdrawing or electron-donating groups, have been synthesized by Pd-catalyzed Suzuki coupling of 1-phenyl-2,5-di(4′-bromophenyl)pyrrole and para-substituted phenylboronic acid derivatives. They possess good thermal stabilities with high decomposition temperatures above 310 °C. Investigation of the photophysical properties of the luminogens 3 a – e indicated that they exhibited dual intense photoluminescence in both solution and the solid state due to their twisted conformations, and their fluorescence quantum yields (Φ_F) were determined as 68.7–94.9 % in THF solution and 19.1–52.0 % in solid powder form. Compounds 3 a – c bearing electron-accepting groups exhibited remarkable solvatochromism with large Stokes shifts, attributable to their D-π-A structure and intramolecular charge-transfer effect. In particular, 3 a , bearing aldehyde groups, displayed an obvious red-shift of the emission band from 445 to 564 nm with increasing solvent polarity. However, no obvious solvatochromic behavior was observed for compounds 3 d , e bearing electron-donating groups. The luminophore 3 a exhibited polymorphic luminescence properties and crystallization-induced emission enhancement.     

Second-generation tags for fluorous chemistry exemplified with a new fluorous Mitsunobu reagent

A new fluorous DEAD reagent bearing two perfluoro-tert-butyloxy groups with propylene spacers shows excellent promise for use in fluorous Mitsunobu reactions. Pure target products were obtained in good yields after removing fluorous byproducts by FSPE. The new reagent serves as a prototype for a greener second generation of fluorous reagents bearing tags that are not expected to degrade in the environment to compounds that are highly persistent or that bioaccumulate in higher organisms.