基于Kriging模型的频响函数有限元模型修正方法

针对使用频响函数进行有限元模型修正的问题,提出了一种基于Kriging模型的修正方法,用于检测结构由损伤引起的在单元刚度特性上的衰减。本文方法可以在不需要推导修正参数与频响函数残差代数关系的前提下,通过少量测点提供的有效数据快速求解;还可以通过控制算法的终止准则来提高对未知区域的探索程度,降低结果收敛到局部解上的可能。使用Kriging模型可以有效地减少原有限元模型的计算次数,保证计算效率的同时,为对结构进行更准确精密的有限元建模提供了便利。     

The finite element method based on interpolating with wavelet basis function

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｐｒｏｂｌｅｍｓｗｉｔｈｌａｒｇｅｇｒａｄｉｅｎｔａｒｅｃｏｍｍｏｎｉｎｐｒａｃｔｉｃａｌｅｎｇｉｎｅｅｒｉｎｇｆｉｅｌｄｓ,ｅ．ｇ．ｉｎｍａｔｅｒｉａｌｌｏｃａｌｉｚａｔｉｏｎ,ｗｉｔｈｉｎｔｈｅｌｏｃａｌｉｚａｔｉｏ...     

基于正交基无单元Galerkin法和非线性规划的安定分析方法

基于安定分析的下限定理,用正交基无单元Galerkin法建立了交交载荷作用下理想弹塑性结构安定分析的下限计算格式.在给定载荷域的载荷角点所对应的载荷作用下,采用正交基无单元Galerkin法计算相应的虚拟弹性应力场.并且利用结构在正交基无单元Galerkin法弹塑性增量分析中平衡迭代结果计算得到自平衡应力场基矢量,然后由这些基矢量的线性组合模拟自平街应力场.安定分析问题最终被归结为一系列未知变量较少的非线性数学规划子问题,通过复合形法求解.算例表明该方法的计算结果是令人满意的,并且对初始复合形顶点和用于构造自平衡应力场基矢量的载荷增量是非常不敏感的.     

Numerical analysis of density flows in adiabatic two-phase fluids through characteristic finite element method

The purpose of this study is to analyze the density flow in adiabatic two-phase fluids through the characteristic finite element method. The fluids are assumed to be liquids. The equations of conservations of mass and momentum for the adiabatic flows and the Birch–Murnaghan equation of state are employed as the governing equations. The employed finite element method is a combination of the characteristic method and the implicit method. The governing equations are divided into two parts: the advection part and the non-advection part. The characteristic method is applied to the advection part. The Hermite interpolation function, which is based on the complete third-order polynomial interpolation using triangular finite element is employed for the interpolation of both velocity and density. Using the discontinuity conditions, an interface translocation method can be derived. The interface of the two flow densities are interpolated through the third-order spline function, using which the curvature of the interface can be directly computed. For the numerical study, the development of density flow over the Tokyo bay is presented. It is detected out that high density area is abruptly diffused over the whole area. According to the differences in the two densities, various flow patterns are computed.     

Improvements in mass conservation using alternative boundary implementations for a quasi‐bubble finite element shallow water model

Finite element approaches generally do not guarantee exact satisfaction of conservation laws especially when Dirichlet‐type boundary conditions are imposed. This article discusses improvement of the global mass conservation property of quasi‐bubble finite element solutions for the shallow water equations, focusing on implementations of the surface‐elevation boundary conditions. We propose two alternative implementations, which are shown by numerical verification to be effective in improving the smoothness of solutions near the boundary and in reducing the mass conservation error. The improvement of the mass conservation property contributes to augmenting the reliability and robustness of long‐term time integrations. Copyright © 2006 John Wiley & Sons, Ltd.     

An unstructured finite element model for incompressible two-phase flow based on a monolithic conservative level set method

We present a robust numerical method for solving incompressible, immiscible two-phase flows. The method extends both a monolithic phase conservative level set method with embedded redistancing and a semi-implicit high-order projection scheme for variable-density flows. The level set method can be initialized conveniently via a simple phase indicator field instead of a signed distance function (SDF). To process the indicator field into a SDF, we propose a new partial differential equation-based redistancing method. We also improve the monolithic level set scheme to provide more accuracy and robustness in full two-phase flow simulations. Specifically, we perform an extra step to ensure convergence to the signed distance level set function and simplify other aspects of the original scheme. Lastly, we introduce consistent artificial viscosity to stabilize the momentum equations in the context of the projection scheme. This stabilization is algebraic, has no tunable parameters and is suitable for unstructured meshes and arbitrary refinement levels. The overall methodology includes few numerical tuning parameters; however, for the wide range of problems that we solve, we identify only one parameter that strongly affects performance of the computational model and provide a value that provides accurate results across all the benchmarks presented. This methodology results in a robust, accurate, and efficient two-phase flow model, which is mass- and volume-conserving on unstructured meshes and has low user input requirements, making it attractive for real-world applications.     

可压缩流体流动多尺度混合有限元数值方法研究

可压缩流体是天然油藏中广泛存在的一种流体,研究其在多孔介质中的渗流规律对于油藏开发具有重要意义。本文采用多尺度混合有限元方法,对可压缩流体渗流问题进行了研究。考虑流体的可压缩性以及介质形变,推导得到了可压缩流体渗流问题的多尺度计算格式。数值计算结果表明,多尺度混合有限元适于求解非均质性和可压缩流问题,具有节省计算量、计算精度高等优势,对于实际大规模油藏模拟具有重要意义。     

Boundary-type finite element method for wave propagation analysis

The boundary-type finite element method has been investigated and applied to the Helmholz and mild-slope equations. Four types of interpolation function are examined based on trigonometric function series. Three-node triangular, four-node quadrilateral, six-node triangular and eight-node quadrilateral elements are tested; these are all non-conforming elements. Three types of numerical example show that the three-node triangular and four-node quadrilateral elements are useful for practical analysis.     

SUPG finite element method based on penalty function for lid-driven cavity flow up to $$Re = 27500$$

A streamline upwind/Petrov–Galerkin(SUPG)finite element method based on a penalty function is proposed for steady incompressible Navier–Stokes equations.The SUPG stabilization technique is employed for the formulation of momentum equations. Using the penalty function method, the continuity equation is simplified and the pressure of the momentum equations is eliminated. The lid-driven cavity flow problem is solved using the present model. It is shown that steady flow simulations are computable up to Re = 27500, and the present results agree well with previous solutions. Tabulated results for the properties of the primary vortex are also provided for benchmarking purposes.     

基于等几何分析的比例边界有限元方法

提出了一种具有比例边界有限元的半解析特性和等几何分析的几何特性的新方法。该新方法是在比例边界有限元框架中用NURBS曲线或曲面精确描述域边界几何形状,同时域边界位移场采用描述几何形状的NURBS形函数等参构造。这种新方法具有比例边界有限元固有的径向解析特性和NURBS的高阶连续性的优点。数值算例显示,与传统的比例边界有限元相比,基于等几何分析的比例边界有限元方法提高了域边界单元和域内应力场的连续性,减少了计算自由度。应用此方法可以用较少的计算自由度获得更高连续阶和更高精度的位移、应力和应变场。     

A stabilized finite element method for the incompressible Navier–Stokes equations using a hierarchical basis

Stabilized finite element methods have been shown to yield robust, accurate numerical solutions to both the compressible and incompressible Navier–Stokes equations for laminar and turbulent flows. The present work focuses on the application of higher‐order, hierarchical basis functions to the incompressible Navier–Stokes equations using a stabilized finite element method. It is shown on a variety of problems that the most cost‐effective simulations (in terms of CPU time, memory, and disk storage) can be obtained using higher‐order basis functions when compared with the traditional linear basis. In addition, algorithms will be presented for the efficient implementation of these methods within the traditional finite element data structures. Copyright © 2001 John Wiley & Sons, Ltd.     

Discontinuous Galerkin finite element method applied to the coupled unsteady Stokes/Cahn-Hilliard equations

Two-phase flows driven by the interfacial dynamics are studied by tracking implicitly interfaces in the framework of the Cahn-Hilliard theory. The fluid dynamics is described by the Stokes equations with an additional source term in the momentum equation taking into account the capillary forces. A discontinuous Galerkin finite element method is used to solve the coupled Stokes/Cahn-Hilliard equations. The Cahn-Hilliard equation is treated as a system of two coupled equations corresponding to the advection-diffusion equation for the phase field and a nonlinear elliptic equation for the chemical potential. First, the variational formulation of the Cahn-Hilliard equation is presented. A numerical test is achieved showing the optimal order in error bounds. Second, the variational formulation in discontinuous Galerkin finite element approach of the Stokes equations is recalled, in which the same space of approximation is used for the velocity and the pressure with an adequate stabilization technique. The rates of convergence in space and time are evaluated leading to an optimal order in error bounds in space and a second order in time with a backward differentiation formula at the second order. Numerical tests devoted to two-phase flows are provided on ellipsoidal droplet retraction, on the capillary rising of a liquid in a tube, and on the wetting drop over a horizontal solid wall.     

基于摄动法的不确定性有限元模型修正方法研究

开展了考虑不确定性的有限元模型修正方法的研究。基于摄动法推导了待修正参数均值和协方差矩阵的迭代格式,其中协方差的迭代格式包括是否考虑试验数据与修正参数之间相关性的两种形式。在理论研究基础上开展数值仿真研究,实现了不确定性有限元模型修正的摄动法,并研究了试验数据样本数量对修正误差的影响。仿真结果表明,该方法适用于解决系统参数与试验数据存在不确定性的模型修正问题,试验样本数量对待修正参数标准差的修正精度影响较大;忽略试验模态参数与待修正参数不确定性之间的相关性,能够避免计算二阶灵敏度矩阵,在保证修正结果准确性的前提下减少计算量。     

广义节点有限元法

应用流形方法思想,通过引入广义节点的概念,对传统有限元方法进行改进,建立了可具有任意高阶多项式托值函数的广义节点有限元方法,计算结果表明,广义节点有限元方法较之传统有限元方法有较高的精度。     

无穷域势流问题的有限元／差分线法混合求解

提出了一种将有限元和差分线法相结合求解无穷域势流问题的算法。用两同心圆将求解域划分为存在重叠的有限和无限两个区域,在有限和无限域上分别用有限元和差分线法求解Laplace方程边值问题。用差分线法推导出的关系式修正有限元方程,求解该方程组从而得到原问题的解。本算法将求解无穷域问题转化为代数特征值问题和有限域内线性方程组的...     

Anisotropic multistage finite element method for two dimensional viscous transonic flow in turbomachinery

A new method based on the anisotropic tensor force finite element and Taylor-Galerkin finite element is presented in the present paper. Its application to two-dimensional viscous transonic flow in turbomachinery improves the convergence rate and stability of calculation, and the results obtained agree well with the experimental measurements.     

矩形空腔内Stokes流的状态空间有限元法

基于Hellinger-Reissner二类变分原理,从平面Stokes流问题的平衡方程、连续性要求和边界条件出发,得到相应的Hamilton函数,建立Hamilton正则方程后,采用分离变量法对场变量进行离散求解:在x方向采用有限元插值,在y方向采用状态空间法给出控制坐标方向的解析解。计算过程中的指数矩阵均采用精细积分法求解,使得本文算法具有高效率、高精度、对步长不敏感的优点。通过对侧边自由液面边界条件的单板驱动矩形空腔Stokes流问题的求解,得到与文献相同的结果,从而验证了本文方法的有效性。本文旨在将弹性力学状态空间有限元法的思想引入到低雷诺数流体力学中,为Hamilton体系下研究复杂边界Stokes流问题提供新的途径。     

基于小波有限元的车辆-轨道-桥梁系统竖向振动分析

基于小波有限元建立了车辆-轨道-桥梁系统竖向运动方程。将车辆、轨道和桥梁作为一个整体系统,钢轨和桥梁采用区间B样条小波单元离散,钢轨与桥梁之间的钢轨基础采用均布的弹簧和阻尼模拟,采用虚功原理建立了基于小波有限元的四轴车辆-轨道-桥梁竖向振动分析模型。结果表明,采用区间B样条小波单元可较大程度上减小系统的自由度数,缩减计算量,节省计算时间。     

SELF-ADAPTIVE STRATEGY FOR ONE-DIMENSIONAL FINITE ELEMENT METHOD BASED ON ELEMENT ENERGY PROJECTION METHOD

Based on the newly-developed element energy projection (EEP) method for computation of super-convergent results in one-dimensional finite element method (FEM), the task of self-adaptive FEM analysis was converted into the task of adaptive piecewise polynomial interpolation. As a result, a satisfactory FEM mesh can be obtained, and further FEM analysis on this mesh would immediately produce an FEM solution which usually satisfies the user specified error tolerance. Even though the error tolerance was not completely satisfied, one or two steps of further local refinements would be sufficient. This strategy was found to be very simple, rapid, cheap and efficient. Taking the elliptical ordinary differential equation of second order as the model problem, the fundamental idea, implementation strategy and detailed algorithm are described. Representative numerical examples are given to show the effectiveness and reliability of the proposed approach.     

Reduced-order finite element method based on POD for fractional Tricomi-type equation

The reduced-order finite element method (FEM) based on a proper orthogonal decomposition (POD) theory is applied to the time fractional Tricomi-type equation. The present method is an improvement on the general FEM. It can significantly save memory space and effectively relieve the computing load due to its reconstruction of POD basis functions. Furthermore, the reduced-order finite element (FE) scheme is shown to be unconditionally stable, and error estimation is derived in detail. Two numerical examples are presented to show the feasibility and effectiveness of the method for time fractional differential equations (FDEs).