Large eddy simulations of targeted electromagnetic control of buoyancy-driven turbulent flow in a slender enclosure

We conducted a large eddy simulation (LES) of a locally applied electromagnetic control of turbulent thermal convection of an electrically conductive fluid (electrolyte solution) inside of a slender enclosure. Generic configurations, consisting of two or three magnets of opposite polarities located below the lower wall, and two oppositely charged electrodes along the side walls, are considered. The neutral situation (pure thermal convection) is selected to be in turbulent regime at Ra = 10⁷, Pr = 7. A magnetically extended Smagorinsky type model for the subgrid turbulent stresses and a simple-gradient diffusion model for the subgrid turbulent heat fluxes are used. Different intensities of applied DC current through electrodes are imposed. The effects of the resulting Lorentz force on flow, turbulence reorganisation and wall-heat transfer are analysed. It is demonstrated that significant flow and turbulence structure reorganisation takes place in the proximity of the lower horizontal wall and in the central parts of the enclosure—even for weak DC current of I = 1 A. Significant turbulence increase, generated by the elevated electromagnetic mixing, produced significant enhancements of the wall-heat transfer—up to 70% for the 2-magnet configuration.     

Turbulent heat transfer characteristics of water flow in a rotating pipe

Large-Eddy-Simulation of turbulent heat transfer for water flow in rotating pipe is performed, for various rotation ratios (0 ≤ N ≤ 14). The value of the Reynolds number, based on the bulk velocity and pipe diameter, is Re = 5,500. The aim of this study is to examine the effect of the rotating pipe on the turbulent heat transfer for water flow, as well as the reliability of the LES approach for predicting turbulent heat transfer in water flow. Some predictions for the case of non-rotating pipe are compared to the available results of literature for validation. To depict the influence of the rotation ratio on turbulent heat transfer, many statistical quantities are analyzed (distributions of mean temperature, rms of fluctuating temperature, turbulent heat fluxes, higher-order statistics). Some contours of instantaneous temperature fluctuations are examined.     

Interaction of turbulent natural convection and surface thermal radiation in inclined square enclosures

Two-dimensional numerical studies of flow and temperature fields for turbulent natural convection and surface radiation in inclined differentially heated enclosures are performed. Investigations are carried out over a wide range of Rayleigh numbers from 10⁸ to 10¹², with the angle of inclination varying between 0° and 90°. Turbulence is modeled with a novel variant of the k–ε closure model. The predicted results are validated against experimental and numerical results reported in literature. The effect of the inclination of the enclosure on pure turbulent natural convection and the latter’s interaction with surface radiation are brought out. Profiles of turbulent kinetic energy and effective viscosity are studied to observe the net effect on the intensity of turbulence caused by the interaction of natural convection and surface radiation. The variations of local Nusselt number and average Nusselt number are presented for various inclination angles. Marked change in the convective Nusselt number is found with the orientation of enclosure. Also analyzed is the influence of change in emissivity on the flow and heat transfer. A correlation relevant to practical applications in the form of average Nusselt number, as a function of Rayleigh number, Ra, radiation convection parameter, N _RC and inclination angle of the enclosure, φ is proposed.     

Highly Resolved LES and URANS of Turbulent Buoyancy-Driven Flow Within Inclined Differentially-Heated Enclosures

In the present study, both LES and unsteady RANS computations are presented, for turbulent natural convection of air inside differentially-heated rectangular tilted cavities using a finite volume code (Code_Saturne), for an aspect ratio of H/L?=?28.6 and Rayleigh number of 0.86×10⁶. Attention is focused on two angles of inclination: 15° to the horizontal with hot lower and cold upper wall, the 15° unstable case, and the mirror image of this case where the angle is the same but with a hot upper and cold lower wall, the 15° stable case. In accordance with recent experimental data, the LES computations for both the stable and unstable tilted cavities returned three-dimensional time-averaged flow fields. In the case of the unstably stratified enclosure, the flow is highly unsteady with coherent turbulent structures in the core of the enclosure. Time-averaged temperature, velocity and resolved turbulence intensities resulting from LES computations show close agreement to measured data. Subsequent comparisons of different URANS schemes with LES are used in order to explore to what extent these models are able to reproduce the large-scale unsteady flow structures. All URANS schemes have been found to be able to reproduce the 3-D unsteady flow features present in the 15° unstable cavity. However, the low-Reynolds-number model tested, as well as requiring a high resolution near-wall grid, also needed a finer grid in the core region than the high-Reynolds-number models, thus making it computationally very expensive. Flow within the 15° stable cavity also shows some 3-D features, although it is significantly less unsteady, and the URANS models tested here have been less successful in reproducing this flow pattern. The overall heat transfer is presented here for both differentially heated enclosures.     

Coupling tabulated chemistry with Large Eddy Simulation of turbulent reactive flows

A new modeling strategy is developed to introduce tabulated chemistry methods in the LES of turbulent premixed combustion. The objective is to recover the correct laminar flame propagation speed of the filtered flame front when the subgrid scale turbulence vanishes. The filtered flame structure is mapped by 1D filtered laminar premixed flames. Closure of the filtered progress variable and the energy balance equations are carefully addressed. The methodology is applied to 1D and 2D filtered laminar flames. These computations show the capability of the model to recover the laminar flame speed and the correct chemical structure when the flame wrinkling is completely resolved. The model is then extended to turbulent combustion regimes by introducing subgrid scale wrinkling effects on the flame front propagation. Finally, the LES of a 3D turbulent premixed flame is performed. To cite this article: R. Vicquelin et al., C. R. Mecanique 337 (2009).     

Large-eddy and unsteady RANS simulations of a shock-accelerated heavy gas cylinder

Two-dimensional numerical simulations of the Richtmyer–Meshkov unstable “shock-jet” problem are conducted using both large-eddy simulation (LES) and unsteady Reynolds-averaged Navier–Stokes (URANS) approaches in an arbitrary Lagrangian–Eulerian hydrodynamics code. Turbulence statistics are extracted from LES by running an ensemble of simulations with multimode perturbations to the initial conditions. Detailed grid convergence studies are conducted, and LES results are found to agree well with both experiment and high-order simulations conducted by Shankar et al. (Phys Fluids 23, 024102, 2011). URANS results using a k–L approach are found to be highly sensitive to initialization of the turbulence lengthscale L and to the time at which L becomes resolved on the computational mesh. It is observed that a gradient diffusion closure for turbulent species flux is a poor approximation at early times, and a new closure based on the mass-flux velocity is proposed for low-Reynolds-number mixing.     

LES-based filter-matrix lattice Boltzmann model for simulating fully developed turbulent channel flow

In this paper, a three-dimensional filter-matrix lattice Boltzmann (FMLB) model based on large eddy simulation (LES) was verified for simulating wall-bounded turbulent flows. The Vreman subgrid-scale model was employed in the present FMLB–LES framework, which had been proved to be capable of predicting turbulent near-wall region accurately. The fully developed turbulent channel flows were performed at a friction Reynolds number Re_τ of 180. The turbulence statistics computed from the present FMLB–LES simulations, including mean stream velocity profile, Reynolds stress profile and root-mean-square velocity fluctuations greed well with the LES results of multiple-relaxation-time (MRT) LB model, and some discrepancies in comparison with those direct numerical simulation (DNS) data of Kim et al. was also observed due to the relatively low grid resolution. Moreover, to investigate the influence of grid resolution on the present LES simulation, a DNS simulation on a finer gird was also implemented by present FMLB–D3Q19 model. Comparisons of detailed computed various turbulence statistics with available benchmark data of DNS showed quite well agreement.     

Quantitative temperature imaging in gas-phase turbulent thermal convection by laser-induced fluorescence of acetone

In this paper, an acetone planar laser-induced fluorescence (PLIF) technique for nonintrusive temperature imaging is demonstrated in gas-phase (Pr = 0.72) turbulent Rayleigh-Bénard convection at Rayleigh number Ra = 1.3᎒⁵. The PLIF technique provides quantitative spatially correlated temperature data without the flow intrusion or time lag associated with physical probes, and without the significant path averaging that plagues most optical heat-transfer diagnostic tools, such as the Mach-Zehnder interferometer, thus making PLIF an attractive choice for quantitative thermal imaging in easily perturbed, complex three-dimensional flow fields. The "instantaneous" (20-ns integration time) thermal images presented have a spatial resolution of 176쐀아 µm and a single-pulse temperature measurement precision of - 2.5 K, or 2.5% of the total temperature difference. These images represent a two-dimensional slice through a complex three-dimensional flow, allowing for thermal structure of the turbulence to be quantified. Statistics such as the horizontally averaged temperature profile, root-mean square (rms) temperature fluctuation, two-point spatial correlations, and conditionally averaged plume structures are computed from an ensemble of 100 temperature images. The profiles of the mean temperature and rms temperature fluctuation are in good agreement with previously published data, and the results obtained from the two-point spatial correlations and conditionally averaged temperature fields show the importance of large-scale coherent structures in this turbulent flow.     

Numerical simulations of non‐equilibrium turbulent boundary layer flowing over a bump

Large‐eddy simulation (LES) and Reynolds‐averaged Navier–Stokes simulation (RANS) with different turbulence models (including the standard k?ε, the standard k?ω, the shear stress transport k?ω (SST k?ω), and Spalart–Allmaras (S–A) turbulence models) have been employed to compute the turbulent flow of a two‐dimensional turbulent boundary layer over an unswept bump. The predictions of the simulations were compared with available experimental measurements in the literature. The comparisons of the LES and the SST k?ω model including the mean flow and turbulence stresses are in satisfied agreements with the available measurements. Although the flow experiences a strong adverse pressure gradient along the rear surface, the boundary layer is unique in that intermittent detachment occurring near the wall. The numerical results indicate that the boundary layer is not followed by mean‐flow separation or incipient separation as shown from the numerical results. The resolved turbulent shear stress is in a reasonable agreement with the experimental data, though the computational result of LES shows that its peak is overpredicted near the trailing edge of the bump, while the other used turbulence models, except the standard k?ε, underpredicts it. Analysis of the numerical results from LES confirms the experimental data, in which the existence of internal layers over the bump surface upstream of the summit and along the downstream flat plate. It also demonstrates that the quasi‐step increase in skin friction is due to perturbations in pressure gradient. The surface curvature enhances the near‐wall shear production of turbulent stresses, and is responsible for the formation of the internal layers. The aim of the present work is to examine the response and prediction capability of LES with the dynamic eddy viscosity model as a sub‐grid scale to the complex turbulence structure with the presence of streamline curvature generated by a bumpy surface. Aiming to reduce the computational costs with focus on the mean behavior of the non‐equilibrium turbulent boundary layer of flow over the bump surface, the present investigation also explains the best capability of one of the used RANS turbulence models to capture the driving mechanism for the surprisingly rapid return to equilibrium over the trailing flat plate found in the measurements. Copyright © 2010 John Wiley & Sons, Ltd.     

LES Study of Turbulent Boundary Layer Over a Smooth and a Rough 2D Hill Model

Large eddy simulation (LES) is carried out to investigate the turbulent boundary-layer flows over a hill-shaped model with a steep or relatively moderate slope at moderately high Reynolds numbers (Re = O(10³)) defined by the hill height and the velocity at the hill height. The study focuses on the effects of surface roughness and curvature. For Sub-grid Scale (SGS) modeling of LES, both the dynamic Smagorinsky model (DSM) and the dynamic mixed model (DMM) are applied. The behavior of the separated shear layer and the vortex motion are affected by the oncoming turbulence, such that the shear layer comes close to the ground surface, or the size of a separation region becomes small because of the earlier instability of the separated shear layer. Appropriate measures are required to generate the inflow turbulence. The methods of Lund et al. (J. Comput. Phys., 140:233–258, 1998) and Nozawa and Tamura (J. Wind Eng. Ind. Aerodyn., 90:1151–1162, 2002; The 4th European and African Conference on Wind Engineering, 1–6, 2005) are employed to simulate the smooth- and rough-wall turbulent boundary layers in order to generate time-sequential data of inflow turbulence. This paper discusses the unsteady phenomena of the wake flows over the smooth and rough 2D hill-shaped obstacles and aims to clarify the roughness effects on the flow patterns and the turbulence statistics distorted by the hill. Numerical validation is conducted by comparing the simulation results with wind tunnel experiment data for the same hill shape at almost the same Re. The applicability of DSM and DMM are discussed, focusing on the recirculation region behind a steep hill.     

High-order Large Eddy Simulations of Confined Rotor-Stator Flows

In many engineering and industrial applications, the investigation of rotating turbulent flow is of great interest. In rotor-stator cavities, the centrifugal and Coriolis forces have a strong influence on the turbulence by producing a secondary flow in the meridian plane composed of two thin boundary layers along the disks separated by a non-viscous geostrophic core. Most numerical simulations have been performed using RANS and URANS modelling, and very few investigations have been performed using LES. This paper reports on quantitative comparisons of two high-order LES methods to predict a turbulent rotor-stator flow at the rotational Reynolds number Re(=?Ωb ²/ν)?=4 × 10⁵. The classical dynamic Smagorinsky model for the subgrid-scale stress (Germano et al., Phys Fluids A 3(7):1760–1765, 1991) is compared to a spectral vanishing viscosity technique (Séverac & Serre, J Comp Phys 226(2):1234–1255, 2007). Numerical results include both instantaneous data and post-processed statistics. The results show that both LES methods are able to accurately describe the unsteady flow structures and to satisfactorily predict mean velocities as well as Reynolds stress tensor components. A slight advantage is given to the spectral SVV approach in terms of accuracy and CPU cost. The strong improvements obtained in the present results with respect to RANS results confirm that LES is the appropriate level of modelling for flows in which fully turbulent and transition regimes are involved.     

Centreline velocity decay characterisation in low-velocity jets downstream from an extended conical diffuser

The centreline velocity decay of round airflow jets issuing from extended conical diffusers with length-to-diameter ratio 1.2≤L _t /d≤20 is studied for moderate bulk Reynolds numbers 1131≤Re _b ≤9054. The centreline velocity decay varies as a function of the initial conditions. The functional correlation between the centreline velocity decay coefficient and the initial centreline turbulence level observed on convergent nozzles (Malmström et al. in J. Fluid Mech. 246:363–377, 1997) breaks down as the initial centreline turbulence level exceeds 20 %. In addition, the centreline velocity decay coefficient expressed as function of the bulk velocity U _b decreases for U _b <3 m/s instead of initial mean velocity U ₀<6 m/s as reported for convergent nozzles (Malmström et al. in J. Fluid Mech. 246:363–377, 1997). The asymptotic values of the decay coefficient for U _b >3 m/s decrease linearly when expressed as function of the initial centreline turbulence intensity u ₀/U ₀. Studied flow and geometrical conditions are relevant to flow through the human upper airways.     

Numerical computation of natural convection in an isosceles triangular cavity with a partially active base and filled with a Cu–water nanofluid

This paper discusses the results of a study related to natural convection cooling of a heat source located on the bottom wall of an inclined isosceles triangular enclosure filled with a Cu water-nanofluid. The right and left walls of the enclosure are both maintained cold at constant equal temperatures, while the remaining parts of the bottom wall are insulated. The study has been carried out for a Rayleigh number in the range 10⁴ ≤ Ra ≤ 10⁶, for a heat source length in the range 0.2 ≤ ε ≤0.8, for a solid volume fraction in the range 0 ≤ ?≤0.06 and for an inclination angle in the range 0° ≤ δ≤45°. Results are presented in the form of streamline contours, isotherms, maximum temperature at the heat source surface and average Nusselt number. It is noticed that the addition of Cu nanoparticles enhances the heat transfer rate and therefore cooling effectiveness for all values of Rayleigh number, especially at low values of Ra. The effect of the inclination angle becomes more noticeable as one increases the value of Ra. For high Rayleigh numbers, a critical value for the inclination angle of δ = 15° is found for which the heat source maximum temperature is highest.     

Large eddy simulation of compressible channel flow

Astract The present study is a contribution to the analysis of wall-bounded compressible flows, including a special focus on wall modeling for compressible turbulent boundary layer in a plane channel. large eddy simulation (LES) of fully developed isothermal channel flows at Re = 3,000 and Re = 4,880 with a sufficient mesh refinement at the wall are carried out in the Mach number range 0.3 ≤ M ≤ 3 for two different source term formulations: first the classical extension of the incompressible configuration by Coleman et al. (J. Fluid Mech. 305:159–183, 1995), second a formulation presently derived to model both streamwise pressure drop and streamwise internal energy loss in a spatially developed compressible channel flow. It is shown that the second formulation is consistent with the spatial problem and yields a much stronger cooling effect at the wall than the classical formulation. Based on the present LES data bank, compressibility and low Reynolds number effects are analysed in terms of coherent structure and statistics. A study of the universality of the structure of the turbulence in non-hypersonic compressible boundary layers (M≤5) is performed in reference to Bradshaw (Annu. Rev. Fluid. Mech. 9:33–54, 1977). An improvement of the van Driest transformation is proposed; it accounts for both density and viscosity changes in the wall layer. Consistently, a new integral wall scaling (y ^c+) which accounts for strong temperature gradients at the wall is developed for the present non-adiabatic compressible flow. The modification of the strong Reynolds analogy proposed by Huang et al. (J. Fluid Mech. 305:185–218, 1995) to model the correlation between velocity and temperature for non-adiabatic wall layers is assessed on the basis of a Crocco–Busemann relation specific to channel flow. The key role of the mixing turbulent Prandtl number Pr _m is pointed out. Results show very good agreement for both source formulations although each of them involve a very different amount of energy transfer at the wall. The present work was performed within the framework of the French–German research initiative “large eddy simulation of complex flows’ (UR 507). The computing resources were provided by IDRIS-France. The authors gratefully acknowledge the financial support from the Centre National de la Recherche Scientifique (CNRS), the Centre d’été Mathématique de Recherche Avancée en Calcul Scientifique (CEMRACS) and the Direction Générale de l’Armement (DGA/D4S).     

Study of Density Effects in Turbulent Buoyant Jets Using Large-Eddy Simulation

Large-Eddy simulations (LES) of spatially evolving turbulent buoyant round jets have been carried out with two different density ratios. The numerical method used is based on a low-Mach-number version of the Navier–Stokes equations for weakly compressible flow using a second-order centre-difference scheme for spatial discretization in Cartesian coordinates and an Adams–Bashforth scheme for temporal discretization. The simulations reproduce the typical temporal and spatial development of turbulent buoyant jets. The near-field dynamic phenomenon of puffing associated with the formation of large vortex structures near the plume base with a varicose mode of instability and the far-field random motions of small-scale eddies are well captured. The pulsation frequencies of the buoyant plumes compare reasonably well with the experimental results of Cetegen (1997) under different density ratios, and the underlying mechanism of the pulsation instability is analysed by examining the vorticity transport equation where it is found that the baroclinic torque, buoyancy force and volumetric expansion are the dominant terms. The roll-up of the vortices is broken down by a secondary instability mechanism which leads to strong turbulent mixing and a subsequent jet spreading. The transition from laminar to turbulence occurs at around four diameters when random disturbances with a 5% level of forcing are imposed to a top-hat velocity profile at the inflow plane and the transition from jet-like to plume-like behaviour occurs further downstream. The energy-spectrum for the temperature fluctuations show both −5/3 and −3 power laws, characteristic of buoyancy-dominated flows. Comparisons are conducted between LES results and experimental measurements, and good agreement has been achieved for the mean and turbulence quantities. The decay of the centreline mean velocity is proportional to x ^−1/3 in the plume-like region consistent with the experimental observation, but is different from the x ⁻¹ law for a non-buoyant jet, where x is the streamwise location. The distributions of the mean velocity, temperature and their fluctuations in the near-field strongly depend upon the ratio of the ambient density to plume density ρ_a/ρ₀. The increase of ρ_a/ρ₀ under buoyancy forcing causes an increase in the self-similar turbulent intensities and turbulent fluxes and an increase in the spatial growth rate. Budgets of the mean momentum, energy, temperature variance and turbulent kinetic energy are analysed and it is found that the production of turbulence kinetic energy by buoyancy relative to the production by shear is increased with the increase of ρ_a/ρ₀. Received 16 June 2000 and accepted 26 June 2001     

LES and RANS for Turbulent Flow over Arrays of Wall-Mounted Obstacles

Large-eddy simulation (LES) has been applied to calculate the turbulent flow over staggered wall-mounted cubes and staggered random arrays of obstacles with area density 25%, at Reynolds numbers between 5 × 10³ and 5 10⁶, based on the free stream velocity and the obstacle height. Re = 5 × 10³ data were intensively validated against direct numerical simulation (DNS) results at the same Re and experimental data obtained in a boundary layer developing over an identical roughness and at a rather higher Re. The results collectively confirm that Reynolds number dependency is very weak, principally because the surface drag is predominantly form drag and the turbulence production process is at scales comparable to the roughness element sizes. LES is thus able to simulate turbulent flow over the urban-like obstacles at high Re with grids that would be far too coarse for adequate computation of corresponding smooth-wall flows. Comparison between LES and steady Reynolds-averaged Navier-Stokes (RANS) results are included, emphasising that the latter are inadequate, especially within the canopy region.     

Towards a Unified Turbulence Simulation Approach for Wall-Bounded Flows

A hybrid Reynolds-averaged Navier–Stokes/Large-Eddy Simulation (RANS/LES) methodology has received considerable attention in recent years, especially in its application to wall-bounded flows at high-Reynolds numbers. In the conventional zonal hybrid approach, eddy-viscosity-type RANS and subgrid scale models are applied in the RANS and LES zones, respectively. In contrast, the non-zonal hybrid approach uses only a generalized turbulence model, which provides a unified simulation approach that spans the continuous spectrum of modeling/simulation schemes from RANS to LES. A particular realization of the non-zonal approach, known as partially resolved numerical simulation (PRNS), uses a generalized turbulence model obtained from a rescaling of a conventional RANS model through the introduction of a resolution control function F _R , where F _R is used to characterize the degree of modeling required to represent the unresolved scales of turbulent motion. A new generalized functional form for F _R in PRNS is proposed in this study, and its performance is compared with unsteady RANS (URANS) and LES computations for attached and separated wall-bounded turbulent flows. It is demonstrated that PRNS behaves similarly to LES, but outperforms URANS in general.     

Coherent structures in trailing-edge cooling and the challenge for turbulent heat transfer modelling

The present paper tests the capability of a standard Reynolds-Averaged Navier–Stokes (RANS) turbulence model for predicting the turbulent heat transfer in a generic trailing-edge situation with a cutback on the pressure side of the blade. The model investigated uses a gradient-diffusion assumption with a scalar turbulent-diffusivity and constant turbulent Prandtl number. High-fidelity Large-Eddy Simulations (LES) were performed for three blowing ratios to provide reliable target data and the mean velocity and eddy viscosity as input for the heat transfer model testing. Reasonably good agreement between the LES and recent experiments was achieved for mean flow and turbulence statistics. The LES yielded coherent structures which were analysed, in particular with respect to their effect on the turbulent heat transfer. For increasing blowing ratio, the LES replicated an also experimentally observed counter-intuitive decrease of the cooling effectiveness caused by the coherent structures becoming stronger. In contrast, the RANS turbulent heat transfer model failed in predicting this behaviour and yielded significantly too high cooling effectiveness. It is shown that the model cannot predict the strong upstream and wall-directed turbulent heat fluxes caused by large coherent structures, which were found to be responsible for the counter-intuitive decrease of the cooling effectiveness.     

Couplage d'un modèle stochastique lagrangien sous-maille avec une simulation grandes échelles

A large eddy simulation (LES) is used to compute passive scalar dispersion in a turbulent flow. Instead of resolving the passive scalar transport equation, fluid particles are tracked in a Lagrangian way and a Langevin stochastic modelling is used for the small scale component of the velocity of fluid particles at a subgrid-scale level. The stochastic model is written in terms of subgrid-scale statistics. The specificity of this study resides in the coupling of a LES with a stochastic model using the filtered subgrid-scale statistics in inhomogeneous turbulence. The results are compared with the wind tunnel experiments of Fackrell and Robins [J. Fluid Mech. 117 (1982) 1–26]. To cite this article: I. Vinkovic et al., C. R. Mecanique 333 (2005).