Numerical investigation of effect of rolling manipulation of traditional Chinese medical massage on blood flow

The hemodynamic mechanism of rolling manipulation (RM) of traditional Chinese medical massage (TCMM) is investigated. An axisymmetrical nonlinear model and an arbitrary Lagrangian-Eulerian finite element method (ALE-FEM) with rezoning algorithm were introduced to study the viscous flow through an axisymmetrical rigid tube with axially moving stenosis to simulate the rolling manipulation. Flow rate and wall shear stress were obtained by solving complete Navier-Stokes equations numerically. The numerical results show that the stenosis moving frequency, namely the frequency of rolling manipulation, has great effect on the disturbance of flow and the wall shear stress. The stenosis coefficient, which characterizes the severity of the stenosis, another adjustable parameter in rolling manipulation, also shows the significant effect on flow rate and wall shear stress. These numerical results may provide some data that can be taken into consideration when massage is used in clinic.     

刚性圆管中血液周期振荡流的切应力分布

本文通过求解圆管内血液振荡流的基本方程，求得圆管内血液流的压力梯度与切应力之间的关系式。在此基础上，详细讲座了圆管中轴向流速和切变率谐波的变化规律，指出流速谐波和切变率谐波的幅值都将随着谐波次数的增大而逐渐减小。为了使所得结果便于应用。文章通过管轴向中心线流速与压力梯度之间的关系式，进一步给出一种利用管轴向中心线流速计算管内切应力分布的简便方法。该方法用于检测活体血管内血液振荡流的切应力分布，具有操作简单，精度较高的优点。最后，以人体颈动脉为例，讨论血液周期振荡流的切应力的分布特性。发现在任意时刻，除了邻近管壁处切应力急剧增大到一定数值之外，沿管截面切应力分布相当均匀且接近于零，呈现出与定常流不同的切应力分布特征。     

In vivo whole-field blood velocity measurement techniques

In this article a number of whole-field blood velocity measurement techniques are concisely reviewed. We primarily focus on optical measurement techniques for in vivo applications, such as laser Doppler velocimetry (including time varying speckle), laser speckle contrast imaging and particle image velocimetry (including particle tracking). We also briefly describe nuclear magnetic resonance and ultrasound particle image velocimetry, two techniques that do not rely on optical access, but that are of importance to in vivo whole-field blood velocity measurement. Typical applications for whole-field methods are perfusion monitoring, the investigation of instantaneous blood flow patterns, the derivation of endothelial shear stress distributions from velocity fields, and the measurement of blood volume flow rates. These applications require individual treatment in terms of spatial and temporal resolution and number of measured velocity components. The requirements further differ for the investigation of macro-, meso-, and microscale blood flows. In this review we describe and classify those requirements and present techniques that satisfy them.     

A two-fluid model for pulsatile flow in catheterized blood vessels

The pulsatile flow of blood through a catheterized artery is analyzed, assuming the blood as a two-fluid model with the suspension of all the erythrocytes in the core region as a Casson fluid and the peripheral region of plasma as a Newtonian fluid. The resulting non-linear implicit system of partial differential equations is solved using perturbation method. The expressions for shear stress, velocity, flow rate, wall shear stress and longitudinal impedance are obtained. The variations of these flow quantities with yield stress, catheter radius ratio, amplitude, pulsatile Reynolds number ratio and peripheral layer thickness are discussed. It is observed that the velocity distribution and flow rate decrease, while, the wall shear, width of the plug flow region and longitudinal impedance increase when the yield stress increases. It is also found that the velocity increases, but, the longitudinal impedance decreases when the thickness of the peripheral layer increases. The wall shear stress decreases non-linearly, while, the longitudinal impedance increases non-linearly when the catheter radius ratio increases. The estimates of the increase in the longitudinal impedance are considerably lower for the present two-fluid model than those of the single-fluid model.     

Two-fluid non-linear model for flow in catheterized blood vessels

Blood flow through a catheterized artery is analyzed, assuming the flow is steady and blood is treated as a two-fluid model with the suspension of all the erythrocytes in the core region as a Casson fluid and the plasma in the peripheral region as a Newtonian fluid. The expressions for velocity, flow rate, wall shear stress and frictional resistance are obtained. The variations of these flow quantities with yield stress, catheter radius ratio and peripheral layer thickness are discussed. It is noticed that the velocity and flow rate decrease while the wall shear stress and resistance to flow increase when the yield stress or the catheter radius ratio increases while all the other parameters were held fixed. It is found that the velocity and flow rate increase while the wall shear stress and frictional resistance decrease with the increase of the peripheral layer thickness. The estimates of the increase in the frictional resistance are significantly very small for the present two-fluid model than those of the single-fluid Casson model.     

局部狭窄血管中血液振荡流的速度和切应力

本文建立一种分析局部缓慢狭窄血管中血液振荡流的数学模型，给出了血液的轴向流速，径向流速和切应力的包含压力梯度项的解析表达式，并讨论了血管内由局部狭窄引起的压力梯度沿轴向变化的规律。文章以局部余弦狭窄为例进行数值计算，详细讨论上游均匀管段压力梯度的定常部分和不同次谐波对狭窄管段内流速和切应力的影响。数值结果表明，与均匀管情况相比，在狭窄段内，血液振荡流轴向流速无论平均值还是脉动幅值均明显增大，且径向流速不再为零。但径向流速仍远小于轴向流速。同时，切应力也不再仅由轴向流速梯度提供，径向流速梯度也将产生切应力，但是在计算管壁切向上的切应力时，径向流速梯度的贡献仍相当大。与均匀管管壁切应力沿流运方向保持恒定不同。狭窄管管壁切应力（平均值和脉动值）将随着狭窄高度的增大而增大，在狭窄最大高度处达到最大，因而沿流动方向产生了较大的切应力梯度。     

An experimental study of the dynamic characteristics in boundary layer in the flow past a two-dimensional circular cylinder at subcritical reynolds numbers

An experimental study of the dynamic characteristics of flow past a two-dimensional circular cylinder is described. The fluctuationsoof wall shear stress, surface-pressure and velocity of the flow are measured with hot-film, hot-wire and pressure transducer. The frequency feature of fluctuations of wall shear stress is given. The cross-correlation functions of these fluctuations at any two points are calculated. The experimental results reveal that there is an overall syncronous fluctuation, at the shedding frequency, in boundary layer in the flow past a two-dimensional circular cylinder at subcritical Reynolds number.     

Prediction of sinkage and rolling resistance for off-the-road vehicles considering penetration velocity

The use of plate pressure tests is common for the prediction of sinkage and rolling resistance for off-the-road vehicles. Most of these penetration tests are carried out with small penetration bodies in a quasi-static way. However, when vehicles are rolling on soft soil, the soil is charged dynamically. Consequently, this dynamic effect should be considered by the prediction of sinkage and rolling resistance. At the Institute of Automotive Engineering at Hamburg, tests were carried out with penetration bodies in sizes up to 900 cm², which is comparable to the contact area of wheels. The results confirm the influence of the penetration velocity. With a constant load, the body sinkage is smaller at a higher penetration velocity. Also shear tests with shear rings of different sizes have been carried out and an exponential equation for the shear strength, not depending on the shear ring size, was found. A dynamic pressure-sinkage relationship depending on the penetration velocity or driving speed was derived and transferred to the sinkage and rolling resistance of a rigid wheel.     

一种确定均匀动脉壁面切应力的非线性方法

从Ling和Atabek提出的``局部流'理论出发，提出一种利用测量血液黏度、管轴上 的血流速度、压力和管径波形计算均匀动脉管壁切应力的非线性方法. 将这种方法与柳兆荣 等提出的利用测量血液黏度、管轴上的血流速度和平均管径计算切应力的线性方法比较，结 果表明，当管壁脉动幅度较小时，两种方法计算的压力梯度、流速剖面和管壁切应力差别较 小；而当管壁脉动幅度增大时，两种方法计算的压力梯度、流速剖面和管壁切应力差别增大. 对于小幅脉动均匀动脉，用线性方法计算管壁切应力有较高的精度；而对于大变形 均匀动脉，则需要考虑非线性因素对管壁切应力的影响. 由于作为输入量的血液黏度、轴心 血流速度、压力波形和管径波形可在活体上通过无损伤或微损伤的检测方法得到， 所提出的计算切应力的方法为在体或离体研究切应力与动脉重建的关系提供了方法学基础.     

Propagation of shear-layer structures in the near-wall region of a turbulent boundary layer

Two non-intrusive techniques, namely laser Doppler anemometry (LDA) and the electrochemical method, have been used for simultaneous measurements of the instantaneous streamwise velocity (U) and longitudinal wall shear stress (S), evaluated in a zero pressure gradient turbulent boundary layer. The space-time correlation between the fluctuating velocity and shear stress suggests that the coherent flow structures are propagated (i) under a slight angle of 5° in the near-wall region and (ii) at an average angle of 15.5° for y⁺>30. It is shown that the time shift obtained from the correlation between the LDA and the electrochemical signals is due to the dynamic behaviour of the electrodiffusion probe, but also to the leaning character of the coherent structures.     

Fluid flow and fluid shear stress in canaliculi induced by external mechanical loading and blood pressure oscillation

The paper studies the problem of fluid flow and fluid shear stress in canaliculi when the osteon is subject to external mechanical loading and blood pressure oscillation. The single osteon is modeled as a saturated poroelastic cylinder. Solid skeleton is regarded as a poroelastic transversely isotropic material. To get near-realistic results, both the interstitial fluid and the solid matrix are regarded as compressible. Blood pressure oscillation in the Haverian canal is considered. Using the poroelasticity theory, an analytical solution of the pore fluid pressure is obtained. Assuming the fluid in canaliculi is incompressible, analytical solutions of fluid flow velocity and fluid shear stress with the Navier-Stokes equations of incompressible fluid are obtained. The effect of various parameters on the fluid flow velocity and fluid shear stress is studied.     

Interstitial fluid flow: simulation of mechanical environment of cells in the interosseous membrane

In vitro experiments have shown that subtle fluid flow environment plays a significant role in living biological tissues,while there is no in vivo practical dynamical measurement of the interstitial fluid flow velocity.On the basis of a new finding that capillaries and collagen fibrils in the interosseous membrane form a parallel array,we set up a porous media model simulating the flow field with FLUENT software,studied the shear stress on interstitial cells’ surface due to the interstitial fluid flow,and analyzed the effect of flow on protein space distribution around the cells.The numerical simulation results show that the parallel nature of capillaries could lead to directional interstitial fluid flow in the direction of capillaries.Interstitial fluid flow would induce shear stress on the membrane of interstitial cells,up to 30 Pa or so,which reaches or exceeds the threshold values of cells’ biological response observed in vitro.Interstitial fluid flow would induce nonuniform spacial distribution of secretion protein of mast cells.Shear tress on cells could be affected by capillary parameters such as the distance between the adjacent capillaries,blood pressure and the permeability coefficient of capillary’s wall.The interstitial pressure and the interstitial porosity could also affect the shear stress on cells.In conclusion,numerical simulation provides an effective way for in vivo dynamic interstitial velocity research,helps to set up the vivid subtle interstitial flow environment of cells,and is beneficial to understanding the physiological functions of interstitial fluid flow.     

局部扩张动脉管血液振荡流的切应力分布

本文求解局部缓慢扩张动脉管中血液振荡流的基本方程，得到血管内血液的流速与压力梯度的关系。通过导出压力梯度沿局部扩张管轴向的变化特性。建立利用扩张段上游血管均匀段中心流速波形确定局部扩张管中血液流的速度和切应力分布的方法，文章以人体颈动脉余弦扩张为例进行分析。详细讨论了局部扩张对血管壁切应力及其梯度分布的影响。数值结果表明，在与刚性均匀管中管壁切应力沿轴向保持不变不同，在局部扩张段，管壁切应力将随着血管半径的增大而减小，因而管壁切应力梯度一般不为零，甚至在某些位置达到相当大的数值。另外，随着血管扩张程度的增加，管壁切应力还将进一步减小，而且管壁切应力梯度也将进一步增大，血管扩张导致管壁切应力的这些变化将直接影响血管壁的结构和功能，使其产生适应性的变化。     

A Two-Layer Mathematical Model of Blood Flow in Porous Constricted Blood Vessels

In this paper, we discussed a mathematical model for two-layered non-Newtonian blood flow through porous constricted blood vessels. The core region of blood flow contains the suspension of erythrocytes as non-Newtonian Casson fluid and the peripheral region contains the plasma flow as Newtonian fluid. The wall of porous constricted blood vessel configured as thin transition Brinkman layer over layered by Darcy region. The boundary of fluid layer is defined as stress jump condition of Ocha-Tapiya and Beavers–Joseph. In this paper, we obtained an analytic expression for velocity, flow rate, wall shear stress. The effect of permeability, plasma layer thickness, yield stress and shape of the constriction on velocity in core & peripheral region, wall shear stress and flow rate is discussed graphically. This is found throughout the discussion that permeability and plasma layer thickness have accountable effect on various flow parameters which gives an important observation for diseased blood vessels.     

Local characteristics of upward gas-liquid flows

The results of two-phase flow structure measurements in an upward gas-liquid flow in a 86.4 mm i.d. tube by the electrochemical and conductivity techniques are presented. Measurements were made in bubble and slug flow regimes at liquid flow rates ranging from 0.2 to 2 m/s.The flow instability and ambiguity in a bubble regime at low velocities is shown to exist. Great discrepancy between measured wall shear stress values and those predicted by the Lockhart-Martinelli model are due to the nonuniform distribution of gas over the tube cross section. Measurements of intensity of wall shear stress and liquid velocity fluctuations in a two-phase flow are presented.     

基于碰撞模型的斜坡滚石颗粒速度预测

滑坡滚石灾害是西部山区常见的地质灾害类型,具有突发性和随机性强的特点,是山区地质灾害预测和防治工作的重点和难点. 本文基于颗粒接触理论,考虑影响斜坡滚石碰撞过程中的随机因素,建立了用于预测斜坡滚石颗粒碰撞后速度的理论模型. 根据冲量及冲量矩定理建立滚石颗粒碰撞基本方程,得到斜坡滚石颗粒碰撞后反弹速度的解析解. 结果表明:斜坡滚石碰撞后反弹速度的解析解包含了坡角、坡体上被碰颗粒速度以及角度、入射速度和角度以及撞击角度等随机因素;当考虑入射滚石颗粒与坡体上被碰颗粒的撞击角度变化时,模型预测结果与试验结果吻合较好;本文进一步预测了滚石颗粒碰撞后颗粒反弹线速度和角度以及反弹旋转角速度的概率分布情况. 结果显示,反弹颗粒速度和角度以及反弹旋转角速度的概率分布均服从高斯分布;当坡体上被碰颗粒速度和坡角发生变化时,其对反弹颗粒速度和角度以及反弹旋转角速度概率分布定性上没有影响,但是对概率分布的中心参数有显著影响.      

Wall shear stress measurement in a turbulent pipe flow using ultrasound Doppler velocimetry

A turbulent boundary layer of a water flow is investigated by means of pulsed ultrasound Doppler velocimetry. The advantage of this method is the acquisition of complete velocity profiles along the sound propagation line within very short time intervals. The shear stress velocity, used for normalizing the velocity profiles, was determined by fitting the profiles to the universal profiles in a turbulent boundary layer obtained from Prandtl's mixing length theory. A coordinate transformation in the near-wall region is proposed to allocate the velocity data to "true" wall distances. From the experimental values of the wall shear stress velocity, the friction factors for a turbulent pipe flow are calculated and compared to the Blasius law. The overall error in measurement was estimated to NJ.4%.     

Processing the Couette viscometry data using a Bingham approximation in shear rate calculation

This paper presents an approach to computing the shear flow curve from torque–rotational velocity data in a Couette rheometer. The approximation techniques in shear rate calculation are generally dictated by the radius ratio between coaxial cylinders and the rheological behaviour of fluid tested. Here, the approach consists in analysing the sheared material as a Bingham fluid and computing an average shear rate when the fluid in the cylindrical gap is partially and fully sheared. We focus in particular on the applicability of the Bingham approximation in shear rate calculation. First, the approach is assessed by examining synthetic data generated with Newtonian, non-Newtonian and yield stress materials with known properties, varying the gap radius ratio. The results, which are compared with commonly used techniques in shear rate calculation, prove the relevance of the proposed approach. Finally, its efficiency is examined by applying it to process Couette data of yield stress fluids taken from published works.     

Multiphase non‐Newtonian effects on pulsatile hemodynamics in a coronary artery

Hemodynamic stresses are involved in the development and progression of vascular diseases. This study investigates the influence of mechanical factors on the hemodynamics of the curved coronary artery in an attempt to identify critical factors of non‐Newtonian models. Multiphase non‐Newtonian fluid simulations of pulsatile flow were performed and compared with the standard Newtonian fluid models. Different inlet hematocrit levels were used with the simulations to analyze the relationship that hematocrit levels have with red blood cell (RBC) viscosity, shear stress, velocity, and secondary flow. Our results demonstrated that high hematocrit levels induce secondary flow on the inside curvature of the vessel. In addition, RBC viscosity and wall shear stress (WSS) vary as a function of hematocrit level. Low WSS was found to be associated with areas of high hematocrit. These results describe how RBCs interact with the curvature of artery walls. It is concluded that although all models have a good approximation in blood behavior, the multiphase non‐Newtonian viscosity model is optimal to demonstrate effects of changes in hematocrit. They provide a better stimulation of realistic blood flow analysis. Copyright © 2008 John Wiley & Sons, Ltd.     

Rheology of shear thickening suspensions and the effects of wall slip in torsional flow

The rheological characterisation of concentrated shear thickening materials suspensions is challenging, as complicated and occasionally discontinuous rheograms are produced. Wall slip is often apparent and when combined with a shear thickening fluid the usual means of calculating rim shear stress in torsional flow is inaccurate due to a more complex flow field. As the flow is no longer “controlled”, a rheological model must be assumed and the wall boundary conditions are redefined to allow for slip. A technique is described where, by examining the angular velocity response in very low torque experiments, it is possible to indirectly measure the wall slip velocity. The suspension is then tested at higher applied torques and different rheometer gaps. The results are integrated numerically to produce shear stress and shear rate values. This enables the measurement of true suspension bulk flow properties and wall slip velocity, with simple rheological models describing the observed complex rheograms.