Simulation of dam‐ and dyke‐break hydrodynamics on dynamically adaptive quadtree grids

Flooding due to the failure of a dam or dyke has potentially disastrous consequences. This paper presents a Godunov‐type finite volume solver of the shallow water equations based on dynamically adaptive quadtree grids. The Harten, Lax and van Leer approximate Riemann solver with the Contact wave restored (HLLC) scheme is used to evaluate interface fluxes in both wet‐ and dry‐bed applications. The numerical model is validated against results from alternative numerical models for idealized circular and rectangular dam breaks. Close agreement is achieved with experimental measurements from the CADAM dam break test and data from a laboratory dyke break undertaken at Delft University of Technology. Copyright © 2004 John Wiley Sons, Ltd.     

An unstructured finite volume model for dam‐break floods with wet/dry fronts over complex topography

A robust, well‐balanced, unstructured, Godunov‐type finite volume model has been developed in order to simulate two‐dimensional dam‐break floods over complex topography with wetting and drying. The model is based on the nonlinear shallow water equations in hyperbolic conservation form. The inviscid fluxes are calculated using the HLLC approximate Riemann solver and a second‐order spatial accuracy is achieved by implementing the MUSCL reconstruction technique. To prevent numerical oscillations near shocks, slope‐limiting techniques are used for controlling the total variation of the reconstructed field. The model utilizes an explicit two‐stage Runge–Kutta method for time stepping, whereas implicit treatments for friction source terms. The novelties of the model include the flux correction terms and the water depth reconstruction method both for partially and fully submerged cells, and the wet/dry front treatments. The proposed flux correction terms combined with the water depth reconstruction method are necessary to balance the bed slope terms and flux gradient in the hydrostatical steady flow condition. Especially, this well‐balanced property is also preserved in partially submerged cells. It is found that the developed wet/dry front treatments and implicit scheme for friction source terms are stable. The model is tested against benchmark problems, laboratory experimental data, and realistic application related to dam‐break flood wave propagation over arbitrary topography. Numerical results show that the model performs satisfactorily with respect to its effectiveness and robustness and thus has bright application prospects. Copyright © 2010 John Wiley & Sons, Ltd.     

Solution of the 2D shallow water equations using the finite volume method on unstructured triangular meshes

A 2D, depth-integrated, free surface flow solver for the shallow water equations is developed and tested. The solver is implemented on unstructured triangular meshes and the solution methodology is based upon a Godunov-type second-order upwind finite volume formulation, whereby the inviscid fluxes of the system of equations are obtained using Roe's flux function. The eigensystem of the 2D shallow water equations is derived and is used for the construction of Roe's matrix on an unstructured mesh. The viscous terms of the shallow water equations are computed using a finite volume formulation which is second-order-accurate. Verification of the solution technique for the inviscid form of the governing equations as well as for the full system of equations is carried out by comparing the model output with documented published results and very good agreement is obtained. A numerical experiment is also conducted in order to evaluate the performance of the solution technique as applied to linear convection problems. The presented results show that the solution technique is robust. © 1997 John Wiley & Sons, Ltd.     

Shallow flow simulation on dynamically adaptive cut cell quadtree grids

A computationally efficient, high‐resolution numerical model of shallow flow hydrodynamics is described, based on dynamically adaptive quadtree grids. The numerical model solves the two‐dimensional non‐linear shallow water equations by means of an explicit second‐order MUSCL‐Hancock Godunov‐type finite volume scheme. Interface fluxes are evaluated using an HLLC approximate Riemann solver. Cartesian cut cells are used to improve the fit to curved boundaries. A ghost‐cell immersed boundary method is used to update flow information in the smallest cut cells and overcome the time step restriction that would otherwise apply. The numerical model is validated through simulations of reflection of a surge wave at a wall, a low Froude number potential flow past a circular cylinder, and the shock‐like interaction between a bore and a circular cylinder. The computational efficiency is shown to be greatly improved compared with solutions on a uniform structured grid implemented with cut cells. Copyright © 2006 John Wiley & Sons, Ltd.     

An implicit mixed finite-volume–finite-element method for solving 3D turbulent compressible flows

The development of new aeronautic projects require accurate and efficient simulations of compressible flows in complex geometries. It is well known that most flows of interest are at least locally turbulent and that the modelling of this turbulence is critical for the reliability of the computations. A turbulence closure model which is both cheap and reasonably accurate is an essential part of a compressible code. An implicit algorithm to solve the 2D and 3D compressible Navier–Stokes equations on unstructured triangular/tetrahedral grids has been extended to turbulent flows. This numerical scheme is based on second-order finite element–finite volume discretization: the diffusive and source terms of the Navier–Stokes equations are computed using a finite element method, while the other terms are computed with a finite volume method. Finite volume cells are built around each node by means of the medians. The convective fluxes are evaluated with the approximate Riemann solver of Roe coupled with the van Albada limiter. The standard k–ϵ model has been introduced to take into account turbulence. Implicit integration schemes with efficient numerical methods (CGS, GMRES and various preconditioning techniques) have also been implemented. Our interest is to present the whole method and to demonstrate its limitations on some well-known test cases in three-dimensional geometries. © 1997 John Wiley & Sons, Ltd.     

A finite volume shock‐capturing solver of the fully coupled shallow water‐sediment equations

This paper describes a numerical solver of well‐balanced, 2D depth‐averaged shallow water‐sediment equations. The equations permit variable horizontal fluid density and are designed to model water‐sediment flow over a mobile bed. A Godunov‐type, Harten–Lax–van Leer contact (HLLC) finite volume scheme is used to solve the fully coupled system of hyperbolic conservation laws that describe flow hydrodynamics, suspended sediment transport, bedload transport and bed morphological change. Dependent variables are specially selected to handle the presence of the variable density property in the mathematical formulation. The model is verified against analytical and semi‐analytical solutions for bedload transport and suspended sediment transport, respectively. The well‐balanced property of the equations is verified for a variable‐density dam break flow over discontinuous bathymetry. Simulations of an idealised dam‐break flow over an erodible bed are in excellent agreement with previously published results, validating the ability of the model to capture the complex interaction between rapidly varying flow and an erodible bed and validating the eigenstructure of the system of variable‐density governing equations. Flow hydrodynamics and final bed topography of a laboratory‐based 2D partial dam breach over a mobile bed are satisfactorily reproduced by the numerical model. Comparison of the final bed topographies, computed for two distinct sediment transport methods, highlights the sensitivity of shallow water‐sediment models to the choice of closure relationships. Copyright © 2016 John Wiley & Sons, Ltd.     

Bathymetry reconstruction based on the zero-inertia shallow water approximation

The knowledge of the channel bed topography is paramount in modeling the hydrodynamics of open channel flows. Indeed, flow models based on the Shallow Water Approximation require prior information on the channel bed topography to accurately capture the flow features in natural rivers, estuaries, and flood plains. We present here a numerical technique for reconstructing the channel bed topography from given free surface elevation data for steep open channel flows for which the zero-inertia shallow water approximation holds. In this context, the shallow water equations are modified by neglecting inertia terms while retaining the effects of the bed slope and friction terms. We show in this work that by algebraic manipulation, we can recast the governing equations into a single first-order partial differential equation which describes the inverse problem which consists in finding the bed topography from known free surface elevation data. Interestingly, the analysis shows that the inverse problem does not require the knowledge of the bed roughness. The forward problem is solved using MacCormack’s explicit numerical scheme by considering unsteady modified shallow water equations. However, the inverse problem is solved using the method of characteristics. The results of the inverse and the forward problem are successfully tested against each other on two different test cases.     

Numerical solutions of the shallow water equations with discontinuous bed topography

A simple scheme is developed for treatment of vertical bed topography in shallow water flows. The effect of the vertical step on flows is modelled with the shallow water equations including local energy loss terms. The bed elevation is denoted with z_b^‐ for the left and z_b⁺ for the right values at each grid point, hence exactly representing a discontinuity in the bed topography. The surface gradient method (SGM) is generalized to reconstruct water depths at cell interfaces involving a vertical step so that the fluxes at the cell interfaces can accurately be calculated with a Riemann solver. The scheme is verified by predicting a surge crossing a step, a tidal flow over a step and dam‐break flows on wet/dry beds. The results have shown good agreements compared with analytical solutions and available experimental data. The scheme is efficient, robust, and may be used for practical flow calculations. Copyright © 2002 John Wiley & Sons, Ltd.     

一维孔隙率浅水方程及其数值离散

通过孔隙率方法来描述挡水物对过水能力的影响建立了一维孔隙率浅水方程. 采用有限体积方法和Roe格式的近似Riemann解建立了孔隙率浅水方程的离散模式. 对底坡和孔隙率源项采用特性方向分解的方法进行处理,使模型精确满足C(Conservative)特性,增加了模型的稳定性. 通过算例模拟证明了模型可以对河道中的挡水物作用进行模拟,且计算结果表明模型具有和谐、稳定、分辨率高等优点.      

Evaluation of well‐balanced bore‐capturing schemes for 2D wetting and drying processes

We consider numerical solutions of the two‐dimensional non‐linear shallow water equations with a bed slope source term. These equations are well‐suited for the study of many geophysical phenomena, including coastal engineering where wetting and drying processes are commonly observed. To accurately describe the evolution of moving shorelines over strongly varying topography, we first investigate two well‐balanced methods of Godunov‐type, relying on the resolution of non‐homogeneous Riemann problems. But even if these schemes were previously proved to be efficient in many simulations involving occurrences of dry zones, they fail to compute accurately moving shorelines. From this, we investigate a new model, called SURF_WB, especially designed for the simulation of wave transformations over strongly varying topography. This model relies on a recent reconstruction method for the treatment of the bed‐slope source term and is able to handle strong variations of topography and to preserve the steady states at rest. In addition, the use of the recent VFRoe‐ncv Riemann solver leads to a robust treatment of wetting and drying phenomena. An adapted ‘second order’ reconstruction generates accurate bore‐capturing abilities.This scheme is validated against several analytical solutions, involving varying topography, time dependent moving shorelines and convergences toward steady states. This model should have an impact in the prediction of 2D moving shorelines over strongly irregular topography. Copyright © 2006 John Wiley & Sons, Ltd.     

An unstructured finite‐volume method for coupled models of suspended sediment and bed load transport in shallow‐water flows

The aim of this work is to develop a well‐balanced finite‐volume method for the accurate numerical solution of the equations governing suspended sediment and bed load transport in two‐dimensional shallow‐water flows. The modelling system consists of three coupled model components: (i) the shallow‐water equations for the hydrodynamical model; (ii) a transport equation for the dispersion of suspended sediments; and (iii) an Exner equation for the morphodynamics. These coupled models form a hyperbolic system of conservation laws with source terms. The proposed finite‐volume method consists of a predictor stage for the discretization of gradient terms and a corrector stage for the treatment of source terms. The gradient fluxes are discretized using a modified Roe's scheme using the sign of the Jacobian matrix in the coupled system. A well‐balanced discretization is used for the treatment of source terms. In this paper, we also employ an adaptive procedure in the finite‐volume method by monitoring the concentration of suspended sediments in the computational domain during its transport process. The method uses unstructured meshes and incorporates upwinded numerical fluxes and slope limiters to provide sharp resolution of steep sediment concentrations and bed load gradients that may form in the approximate solutions. Details are given on the implementation of the method, and numerical results are presented for two idealized test cases, which demonstrate the accuracy and robustness of the method and its applicability in predicting dam‐break flows over erodible sediment beds. The method is also applied to a sediment transport problem in the Nador lagoon.Copyright © 2013 John Wiley & Sons, Ltd.     

A second-order upwind finite-volume method for the Euler solution on unstructured triangular meshes

A scheme for the numerical solution of the two-dimensional (2D) Euler equations on unstructured triangular meshes has been developed. The basic first-order scheme is a cell-centred upwind finite-volume scheme utilizing Roe's approximate Riemann solver. To obtain second-order accuracy, a new gradient based on the weighted average of Barth and Jespersen's three-point support gradient model is used to reconstruct the cell interface values. Characteristic variables in the direction of local pressure gradient are used in the limiter to minimize the numerical oscillation around solution discontinuities. An Approximate LU (ALU) factorization scheme originally developed for structured grid methods is adopted for implicit time integration and shows good convergence characterisitics in the test. To eliminate the data dependency which prohibits vectorization in the inversion process, a black-gray-white colouring and numbering technique on unstructured triangular meshes is developed for the ALU factorization scheme. This results in a high degree of vectorization of the final code. Numerical experiments on transonic Ringleb flow, transonic channel flow with circular bump, supersonic shock reflection flow and subsonic flow over multielement aerofoils are calculated to validate the methodology.     

Flux and source term discretization in two‐dimensional shallow water models with porosity on unstructured grids

Two‐dimensional shallow water models with porosity appear as an interesting path for the large‐scale modelling of floodplains with urbanized areas. The porosity accounts for the reduction in storage and in the exchange sections due to the presence of buildings and other structures in the floodplain. The introduction of a porosity into the two‐dimensional shallow water equations leads to modified expressions for the fluxes and source terms. An extra source term appears in the momentum equation. This paper presents a discretization of the modified fluxes using a modified HLL Riemann solver on unstructured grids. The source term arising from the gradients in the topography and in the porosity is treated in an upwind fashion so as to enhance the stability of the solution. The Riemann solver is tested against new analytical solutions with variable porosity. A new formulation is proposed for the macroscopic head loss in urban areas. An application example is presented, where the large scale model with porosity is compared to a refined flow model containing obstacles that represent a schematic urban area. The quality of the results illustrates the potential usefulness of porosity‐based shallow water models for large scale floodplain simulations. Copyright © 2005 John Wiley & Sons, Ltd.     

A Godunov‐type fractional semi‐implicit method based on staggered grid for dam‐break modeling

A semi‐implicit finite volume model based upon staggered grid is presented for solving shallow water equation. The model employs a time‐splitting scheme that uses a predictor–corrector method for the advection term. The fluxes are calculated based on a Riemann solver in the prediction step and a downwind scheme in the correction step. A simple TVD scheme is employed for shock capturing purposes in which the Minmond limiter is used for flux functions. As a consequence of using staggered grid, an ADI method is adopted for solving the discretized equations for 2‐D problems. Several 1‐D and 2‐D flows have been modeled with satisfactory results when compared with analytical and experimental test cases. The model is also capable of simulating supercritical as well as subcritical flow. Copyright © 2010 John Wiley & Sons, Ltd.     

A triangular spectral/hp discontinuous Galerkin method for modelling 2D shallow water equations

We present a spectral/hp element discontinuous Galerkin model for simulating shallow water flows on unstructured triangular meshes. The model uses an orthogonal modal expansion basis of arbitrary order for the spatial discretization and a third‐order Runge–Kutta scheme to advance in time. The local elements are coupled together by numerical fluxes, evaluated using the HLLC Riemann solver. We apply the model to test cases involving smooth flows and demonstrate the exponentially fast convergence with regard to polynomial order. We also illustrate that even for results of ‘engineering accuracy’ the computational efficiency increases with increasing order of the model and time of integration. The model is found to be robust in the presence of shocks where Gibbs oscillations can be suppressed by slope limiting. Copyright 2004 John Wiley & Sons, Ltd.     

Finite volume solution to integrated shallow surface–saturated groundwater flow

This paper describes development of an integrated shallow surface and saturated groundwater model (GSHAW5). The surface flow motion is described by the 2‐D shallow water equations and groundwater movement is described by the 2‐D groundwater equations. The numerical solution of these equations is based on the finite volume method where the surface water fluxes are estimated using the Roe shock‐capturing scheme, and the groundwater fluxes are computed by application of Darcy's law. Use of a shock‐capturing scheme ensures ability to simulate steady and unsteady, continuous and discontinuous, subcritical and supercritical surface water flow conditions. Ground and surface water interaction is achieved by the introduction of source‐sink terms into the continuity equations. Two solutions are tightly coupled in a single code. The numerical solutions and coupling algorithms are explained. The model has been applied to 1‐D and 2‐D test scenarios. The results have shown that the model can produce very accurate results and can be used for simulation of situations involving interaction between shallow surface and saturated groundwater flows. Copyright © 2005 John Wiley & Sons, Ltd.     

A robust and well‐balanced scheme for the 2D Saint‐Venant system on unstructured meshes with friction source term

In the following lines, we propose a numerical scheme for the shallow‐water system supplemented by topography and friction source terms, in a 2D unstructured context. This work proposes an improved version of the well‐balanced and robust numerical model recently introduced by Duran et al. (J. Comp. Phys., 235 , 565–586, 2013) for the pre‐balanced shallow‐water equations, accounting for varying topography. The present work aims at relaxing the robustness condition and includes a friction term. To this purpose, the scheme is modified using a recent method, entirely based on a modified Riemann solver. This approach preserves the robustness and well‐balanced properties of the original scheme and prevents unstable computations in the presence of low water depths. A series of numerical experiments are devoted to highlighting the performances of the resulting scheme. Simulations involving dry areas, complex geometry and topography are proposed to validate the stability of the numerical model in the neighbourhood of wet/dry transitions. Copyright © 2015 John Wiley & Sons, Ltd.     

Boussinesq cut‐cell model for non‐linear wave interaction with coastal structures

Boussinesq models describe the phase‐resolved hydrodynamics of unbroken waves and wave‐induced currents in shallow coastal waters. Many enhanced versions of the Boussinesq equations are available in the literature, aiming to improve the representation of linear dispersion and non‐linearity. This paper describes the numerical solution of the extended Boussinesq equations derived by Madsen and Sørensen (Coastal Eng. 1992; 15 :371–388) on Cartesian cut‐cell grids, the aim being to model non‐linear wave interaction with coastal structures. An explicit second‐order MUSCL‐Hancock Godunov‐type finite volume scheme is used to solve the non‐linear and weakly dispersive Boussinesq‐type equations. Interface fluxes are evaluated using an HLLC approximate Riemann solver. A ghost‐cell immersed boundary method is used to update flow information in the smallest cut cells and overcome the time step restriction that would otherwise apply. The model is validated for solitary wave reflection from a vertical wall, diffraction of a solitary wave by a truncated barrier, and solitary wave scattering and diffraction from a vertical circular cylinder. In all cases, the model gives satisfactory predictions in comparison with the published analytical solutions and experimental measurements. Copyright © 2007 John Wiley & Sons, Ltd.     

Lattice Boltzmann modeling of shallow water flows over discontinuous beds

Numerical modeling of shallow water flows over discontinuous beds is presented. The flows are described with the shallow water equations and the equations are solved using the lattice Boltzmann method (LBM) with single relaxation time (Bhatnagar–Gross–Krook‐LBM (BGK‐LBM)) and the multiple relaxation time (MRT‐LBM). The weighted centered scheme for force term together with the bed height for a bed slope is described to improve simulation of flows over discontinuous bed. Furthermore, the resistance stress is added to include the local head loss caused by flow over a step. Four test cases, one‐dimensional tidal over regular bed and steps, dam‐break flows, and two‐dimensional shallow water flow over a square block, are considered to verify the present method. Agreements between predictions and analytical solutions are satisfactory. Furthermore, the performance and CPU cost time of BGK‐LBM and MRT‐LBM are compared and studied. The results have shown that the lattice Boltzmann method is simple and accurate for simulating shallow water flows over discontinuous beds. This demonstrates the capability and applicability of the lattice Boltzmann method in modeling shallow water flows on bed topography with a discontinuity in practical hydraulic engineering. Copyright © 2014 John Wiley & Sons, Ltd.     

An evaluation of force terms in the lattice Boltzmann models in simulating shallow water flows over complex topography

Proper approximation of the force terms, especially the bed slope term, is of crucial importance to simulating shallow water flows in lattice Boltzmann (LB) models. However, there is little discussion on the schemes of adding force terms to LB models for shallow water equations (SWEs). In this study, we evaluate the performance of forcing schemes coupled with different LB models (LABSWE and MLBSWE) in simulating shallow water flows over complex topography and try to find out their intrinsic characteristics and applicability. Three cases are adopted for evaluation, including a stationary case, a one-dimensional tidal wave flow over an irregular bed, and a steady flow over a two-dimensional seamount. The simulating results are compared with analytical solutions or the results produced by the finite difference method. For LABSWE, all the forcing schemes, except for the weighting factor method, fail to produce accurate solutions for the test cases; this is probably due to the mismatch between the bed slope term in source terms and the quadratic depth term of the equilibrium distribution functions in these forcing schemes. For MLBSWE, all the forcing schemes are capable of simulating flows over the complex topography accurately; furthermore, those schemes taking into account the collision effect τ to eliminate the momentum induced by forces provide more accurate solutions with quicker convergence as the lattice size decreases. In this view, MLBSWE can bring more flexibility in treating the force terms and thus can be a better tool to simulate shallow water flows over complex topography in practical application.