Synthesis,characterization and catalytic activity of novel Co(II) and Pd(II)‐perfluoroalkylphthalocyanine in fluorous biphasic system; benzyl alcohol oxidation

Tetrakis[heptadecafluorononyl] substituted phthalocyanine complexes were prepared by template synthesis from 4‐(heptadecafluorononyloxy)phthalonitrile with Co(CH₃COO)^·₂H₂O or PdCl₂ in 2‐N, N‐dimethylaminoethanol. The corresponding phthalonitrile was obtained from heptadecafluorononan‐1‐ol and 4‐nitrophthalonitrile with K₂CO₃ in DMF at 50 °C. The structures of the compounds were characterized by elemental analysis, FTIR, UV–vis and MALDI‐TOF MS spectroscopic methods. Metallophthalocyanines are soluble in fluoroalkanes such as perfluoromethylcyclohexane (PFMCH). The complexes were tested as catalysts for benzyl alcohol oxidation with tert‐butylhydroperoxide (TBHP) in an organic–fluorous biphasic system (n‐hexane–PFMCH). The oxidation of benzyl alcohol was also tested with different oxidants, such as hydrogen peroxide, m‐chloroperoxybenzoic acid, molecular oxygen and oxone in n‐hexane–PFMCH. TBHP was found to be the best oxidant for benzyl alcohol oxidation since higher conversion and selectivity were observed when this oxidant was used. Copyright © 2008 John Wiley & Sons, Ltd.     

Homogeneous catalysts supported on soluble polymers: biphasic Suzuki-Miyaura coupling of aryl chlorides using phase-tagged palladium-phosphine catalysts

The Suzuki-Miyaura coupling of aryl chlorides and PhB(OH)(2) under biphasic conditions (DMSO/heptane) can be performed in almost quantitative yields over several cycles by means of polymeric Pd catalysts with soluble polyethylene glycol phase tags. Three sterically demanding and electron-rich phosphines 1-CH(2)Br,4-CH(2)P(1-Ad)(2)-C(6)H(4), and 2-PCy(2),2'-OH-biphenyl, and 2-PtBu(2),2'-OH-biphenyl were covalently bonded to 2000 Dalton MeOPEG-OH. The catalysts, which were formed in situ from Na(2)[PdCl(4)], the respective polymeric phosphine, KF/K(3)PO(4), and PhB(OH)(2), efficiently couple aryl chlorides at 80 degrees C at 0.5 mol % loading, resulting in a >90 % yield of the respective biphenyl derivatives. The use of polar phase tags allows the efficient recovery of palladium-phosphine catalysts by simple phase separation of the catalyst-containing DMSO solution and the product-containing n-heptane phase. The high activity (TOF) of the catalyst remains almost constant over more than five reaction cycles, which involve the catalytic reaction, separation of the product phase from the catalyst phase, and addition of new reactants to initiate the next cycle. The Buchwald type biphenyl phosphines form the most active Pd catalysts, which are 1.3-2.8 times more active than catalysts derived from diadamantyl-benzylphosphine, but appear to be less robust in the recycling experiments. There is no apparent leaching of the catalyst into the heptane solution (<0.05 %), as evidenced by spectrophotometric measurements, and contamination of the product with Pd is avoided.     

Homogeneous catalysts supported on soluble polymers: biphasic Sonogashira coupling of aryl halides and acetylenes using MeOPEG-bound phosphine-palladium catalysts for efficient catalyst recycling

The Sonogashira coupling of various aryl bromides and iodides with different acetylenes was studied under biphasic conditions with soluble, polymer-modified catalysts to allow the efficient recycling of the homogeneous catalyst. For this purpose, several sterically demanding and electron-rich phosphines of the type R(P)PR(2) were synthesised. They are covalently linked to a monomethyl polyethylene glycol ether with a mass of 2000 Dalton (R(P)=MeOPEG(2000)) R(P)PR(2): -PR(2)= -CH(2)C(6)H(4)CH(2)P(1-Ad)(2), -C(6)H(4)-P(1-Ad)(2), -C(6)H(4)-PPh(2). To couple aryl iodides and acetylenes, the catalyst [(MeCN)(2)PdCl(2)]/2 R(P)-C(6)H(4)-PPh(2) was used in CH(3)CN/Et(3)N/n-heptane (5/2/5). The combined yields of coupling product over five reaction cycles are between 80-95 percent. There is no apparent leaching of the catalyst into n-heptane, as evidenced by (1)H NMR spectroscopy. The new catalyst [(MeCN)(2)PdCl(2)]/2 (1-Ad)(2)PBn can be used for room-temperature coupling of various aryl bromides and acetylenes in THF with HNiPr(2) as a base. A closely related catalyst Na(2)[PdCl(4)]/2 R(P)-CH(2)C(6)H(4)CH(2)P(1-Ad)(2) linked to the polymer was used to couple aryl bromides and acetylenes in DMSO or DMSO/n-heptane at 60 degrees C with 0.5 mol percent Na(2)[PdCl(4)], 1 mol percent R(P)PR(2) and 0.33 mol percent CuI. The combined yield of coupling products over five cycles is always greater than 90 percent, except for sterically hindered aryl bromides. The determination of the turnover frequency (TOF) of the catalyst indicates only a small decrease in activity over five cycles. Leaching of the catalyst into the product containing n-heptane solution could not be detected by means of (1)H NMR and TXRF; this is indicative of >99.995 percent catalyst retention in the DMSO solvent.     

Perfluoroalkylated-pyridine catalyzed Aldol condensations of aldehydes and ketones in a fluorous biphasic system without fluorous solvent

Aldol condensation of different ketones with various aromatic aldehydes proceeds efficiently in the presence of catalytic amount of perfluoroalkylated-pyridine in a fluorous biphasic system without fluorous solvent, which has prompted various concerns involving cost, solvent leaching, and environmental persistence. The catalyst can be recovered by simple cooling and precipitation and used again.     

有机溶剂/缓冲液两相体系中全细胞催化拆分环氧氯丙烷

研究了有机溶剂/缓冲液两相体系中重组大肠杆菌E.coli BL21 (DE3)全细胞水解动力学拆分外消旋环氧氯丙烷制备(R)-环氧氯丙烷的过程.结果表明,最适反应条件为:最适有机溶剂异辛烷与缓冲液的体积比7:3,最适缓冲液pH 8.0,底物浓度574mmol/L,全细胞加入量0.07g湿菌体/ml溶液,温度30℃.在此条件下于1L反应器中反应45min,(R)-环氧氯丙烷的摩尔产率、光学纯度和时空产率分别达到37.5%,99.3%ee和0.286mol/(L·h).与单一水相体系相比,异辛烷/缓冲液两相体系中底物浓度和(R)-环氧氯丙烷时空产率分别提高了55.2%和98.6%.     

Fluorous biphasic catalysis with dirhodium(II) perfluorocarboxylates: selective silylation of alcohols under fluorous biphasic conditions

Dirhodium(II) perfluorocarboxylates bearing C7–C13 perfluoroalkyl chains have been prepared and used as catalysts under fluorous biphasic conditions. They were found to be active and recyclable catalysts for the silylation of alcohols with triethylsilane. Hydrophobic, primary alcohols are preferentially silylated by the fluorous biphasic catalytic system in comparison with hydrophilic or secondary ones. This opens the way to the development of selective silylation protocols.     

An efficient catalytic system for cyclocarbonylation of terpenes into lactones

Three different kinds of representative monoterpenic alcohol are involved in the palladium‐catalysed cyclocarbonylation reaction. Lactone formation is shown to occur when cyclic ( 1 ), tertiary ( 3 ) and primary allylic alcohol ( 7 ) functions are reacted, in the presence of CO with [HPd(SnCl₃)L₂] as the active catalytic species. Good yields and selectivities can easily be reached for isopulegol ( 1 ), and dihydromyrcenol ( 3 ). However, more modest results are obtained for the functionalization of geraniol into the original lactone ( 9 ). This lactone can be largely favoured by using a basic chelating diphosphine ligand such as 1,4‐bis(diphenylphosphino)butane. Copyright © 2005 John Wiley & Sons, Ltd.     

A novel ytterbium/perfluoroalkylated-pyridine catalyst for Baylis-Hillman reaction in a fluorous biphasic system

Ytterbium perfluorooctanesulfonate [Yb(OPf)₃] catalyses the highly efficient Baylis-Hillman reaction in the presence of a catalytic amount of a novel perfluoroalkylated-pyridine as a ligand in a fluorous biphasic system (FBS) composed of toluene and perfluorodecalin. The new process can be carried out successfully without the use of a stoichiometric amount of Lewis base. The fluorous phase containing the active catalytic species is easily separated and can be reused several times without significant loss of catalytic activity.     

Catalytic hydrogenation of 1-hexene with RuCl2(TPPMS)3(DMSO), Part I: Aqueous biphasic system

RuCl₂(TPPMS)₃(DMSO) (complex I) shows good catalytic 1-hexene hydrogenation activity in toluene/water biphasic medium under moderate conditions, reaching 90% conversion in 5 hours, with good hydrogenation selectivity and low isomerization products. The effect of various parameters (temperature, H₂ pressure, reaction time, substrate/catalyst ratio, added electrolytes and other additives) on the hydrogenation reaction were studied. Complex (I) shows good stability in the reaction medium and can be reused several times. This revised version was published online in August 2006 with corrections to the Cover Date.     

Enantioselective and diastereoselective Tsuji-Trost allylic alkylation of lactones: an experimental and computational study

The Tsuji-Trost protocol has been successfully employed for the allylic alkylation of preformed lactone enolates. It has been demonstrated that this Pd-catalyzed reaction can be carried out in an enantio- and diastereoselective manner. The use of additives, such as LiCl, was found to be crucial for reaching high levels of product selectivity. For one particular pair of reactants, density functional theory was used to investigate the mechanism of the nucleophilic addition. Among the five pathways considered, the reaction between an (allyl)Pd(BINAP) complex and a LiCl-lithium enolate adduct is predicted to be the most likely route for C-C bond formation. LiCl plays a key role as the connecting link between the noble metal and the enolate in the kinetically favored transition state. The computed diastereoselectivity ratio is in good agreement with the experimentally observed value.     

Silver carboxylate promoted lactonization: a general method applicable to prepare medium and large-sized lactones without high dilution or slow addition

Efficient and applicable approach to macrolactonizations, with ready availability of starting materials and simple operation, remains a challenging task for the organic community. We developed a ‘freshman-can-do’ protocol to medium- and large-sized lactones, not depending on high-dilution or slow addition techniques. Application of this method for the synthesis of natural lactones or potentially pharmaceutical compounds might be useful for organic chemists and pharmacists.     

Palladium‐Catalyzed Alkoxycarbonylation of Terminal Alkenes To Produce α,β‐Unsaturated Esters: The Key Role of Acetonitrile as a Ligand

A mild protocol has been developed for the Pd^II‐catalyzed alkoxycarbonylation of terminal olefins to produce α,β‐unsaturated esters with a wide range of substrates. Key features are the use of MeCN as solvent (and/or ligand) to control the reactivity of the intermediate Pd complexes and the combination of CO with O₂, which facilitates the Cu^II‐mediated reoxidation of the Pd⁰ complex to Pd^II and prevents double carbonylation.     

Use of allyl, 2-tetrahydrofuryl, and 2-tetrahydropyranyl ethers as useful C3-, C4-, and C5-carbon sources: palladium-catalyzed allylation of aldehydes

Palladium-diethylzinc or palladium-triethylborane catalytically promotes self-allylation of 2-(allyloxy)tetrahydrofurans, 2-(allyloxy)tetrahydropyrans, and their hydroxy derivatives on the rings (ribose, glucose, mannose, deoxyribose, deoxyglucose). All the reactions proceed at room temperature and provide polyhydroxyl products, sharing a structural motif of a homoallyl alcohol, in good to excellent yields with high levels of stereoselectivity. Useful C3-unit elongation, which makes the best use of an allyl ether as a protecting group and a nucleophilic allylation agent, is demonstrated. Mechanisms for the umpolung reaction (of an allyl ether into an allylic anion) and stereoselectivity associated with allylation of aldehydes are discussed.     

Model studies on carboxypeptidase Y catalyzed peptide synthesis in an aqueous-organic two-phase system

Carboxypeptidase Y catalyzes in a biphasic system containing carbon tetrachloride and carbonate buffer the reaction ofZ-Phe-OMe and variousZ-andBoc-protected dipeptide methyl esters with Val-NH₂ and Leu-NH₂, respectively. This method has been applied to the synthesis of the corresponding N-protected tripeptide amides on a preparative scale. Using a substrate—nucleophile ratio of only 1:2 or 1:3 the peptide derivatives are obtained in yields of 56–97%.Abbreviations: IUPAC-IUB rules for peptides are followed, see Eur. J. Biochem.27, 201 (1972).Boc=tert-butyloxycarbonyl,Z=benzyloxycarbonyl,-OMe=methyl ester, HPLC=high performance liquid chromatography, TLC=thin layer chromatography,CPD-Y=carboxypeptidase Y.     

Pd/Cu Dual-Catalyzed Asymmetric Synthesis of Highly Functional All-Carbon Quaternary Stereocenters from Vinyl Carbonates

The challenging metal-catalyzed asymmetric synthesis of highly functional quaternary carbon centers using decarboxylative C(sp³)−C(sp³) bond formation reactions is reported. The key substrate, a vinyl cyclic carbonate, is activated to provide concomitantly both the requisite nucleophile (by formal umpolung) and electrophile reaction partner preceding the asymmetric cross-coupling process. A wide screening of reaction conditions, additives and catalyst precursors afforded a protocol that gave access to a series of compounds featuring densely functionalized, elusive quaternary carbon stereocenters in appreciable yield and with enantiomeric ratios (er's) of up to 90 : 10.     

Traversing Steric Limitations by Cooperative Lewis Base/Palladium Catalysis: An Enantioselective Synthesis of α‐Branched Esters Using 2‐Substituted Allyl Electrophiles

Cooperative catalysis enables the direct enantioselective α‐allylation of linear prochiral esters with 2‐substituted allyl electrophiles. Critical to the successful development of the method was the recognition that metal‐centered reactivity and the source of enantiocontrol are independent. This feature is unique to simultaneous catalysis events and permits logical tuning of the supporting ligands without compromising enantioselectivity.