Quantitative immunoassay for determining polyaromatic hydrocarbons in electrical insulating oils

The development and application of a combined sample extraction and immunoassay protocol for the quantification of polyaromatic hydrocarbons (PAHs) in transformer oils is reported. Tests were performed on 12 different used transformer oils from three major manufacturers. The removal of matrix interferents was achieved by loading oil fractions onto silica solid phase extraction cartridges and eluting with non-polar solvent prior to evaporation and reconstitution in a more polar medium. Extracts were immunoassayed using two commercially available PAH test kits either having broad specificity towards priority PAHs or enhanced binding specificity toward more carcinogenic PAHs. The total and carcinogenic PAH test kits yielded PAH levels in the oil extracts 5.86-fold and 126-fold lower than the industry-standard IP346 method. The latter method, widely used by the industry, since it correlates with biological carcinogenicity tests, grossly over-estimates PAH levels in oils since it is a non-specific gravimetric solvent extraction approach. The assay was found to be unaffected by the extract sample matrix and was capable of determining PAHs at the nanogram per millilitre level. The assay protocol was simple, low-cost and rapid (<2 h) and equally amenable to operation at remote sites or high-throughput sample screening. The binding specificity of the total anti-PAH antibody was examined by preparing and loading an anti-PAH immunosorbent with oil, prior to solvent displacement of antibody-bound compounds and by gas chromatography (GC)–mass spectrometry (MS) analysis.     

多环芳烃指纹用于渤海采油平台原油的鉴别

采用气相色谱/质谱方法,对渤海海上4个不同区块、5个平台的6口油井原油进行了烷基化多环芳烃系列化合物和美国环保署（EPA）优先控制多环芳烃系列化合物的准确定性定量分析。通过多环芳烃原始指纹谱图、多环芳烃组分分布模式和特征比值的比较对上述原油进行鉴别。结果证明不同区块的原油中多环芳烃指纹信息不尽相同,即使在同一平台不同油井中所产的原油其指纹也存在一定差异。为确保原油鉴别的准确性,分析过程中必须在仪器的稳定性和样品前处理方面实施严格的质量控制措施。     

A Routine Method for the Quantitative Determination of Polycyclic Aromatic Hydrocarbons (PAHs) in Urban Air

Abstract

We have developed a method for the quantitative determination of polycyclic aromatic hydrocarbons (PAHs) present in urban air, which can be performed rather quickly, and which uses a minimal amount of solvents.

Air samples were collected using a home-made low-volume air sampler equipped with glass fibre filter and polyurethane foam plugs. After Soxhlet extraction a liquid-liquid partition was carried out to isolate the PAH fraction. This liquid-liquid partition was performed in micro-scale, enabling us to use small quantities of the solvents and to separate the solution layers very rapidly using a centrifuge. Sample clean-up was accomplished on a high performance liquid chromatograph equipped with two normal phase silica columns. The losses of all investigated PAHs occurring during the various steps of sample clean-up have been determined. The qualitative and quantitative determination of the PAHs was carried out by capillary gas chromatography; the results were confirmed by GC/MS measurements.

The analytical procedure described was applied over a period of one year to measure the concentrations of 21 PAHs in the city of Vienna at a site with high traffic density. The concentrations of the four more volatile PAHs were determined on a semi-quantitative basis. The ratio of two selected PAHs was used to estimate the respective contribution of traffic and domestic heating to the total PAH level at the sampling site.     

Clean-up methods for polycyclic aromatic hydrocarbons analyses by capillary gas chromatography

Summary Comparative results of pre-treatment methods for the extracts of polycyclic aromatic hydrocarbons (PAHs) from airborne particulate matter for quantitative determination by gas chromatography (GC) are presented. The first method included liquid-liquid extraction and column liquid adsorption chromatography. In the second procedure the extract was fractionated by liquid-liquid chromatography and liquid adsorption chromatography. In the last procedure two different solid phase extraction (SPE) cartridges examined makes it possible to separate PAHs and remove paraffinic compounds which is very important for the quantitative GC analysis of the PAHs. Recoveries of PAH standards and some their derivatives were determined and the contents of 15 of the most important PAHs, were compared. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Simultaneous multidetermination of residues of pesticides and polycyclic aromatic hydrocarbons in olive and olive-pomace oils by gas chromatography/tandem mass spectrometry

A multiresidue method for determining major pesticides and polycyclic aromatic hydrocarbons (PAHs) in olive oils in a single injection by use of gas chromatography/tandem mass spectrometry (GC-MS/MS) is proposed. Samples are previously extracted with an acetonitrile/n-hexane mixture and cleaned up by gel permeation chromatography. Electron ionization and chemical ionization allow pesticides and PAHs to be determined in a single analysis. The precision obtained was quite satisfactory (relative standard deviations ranged from 3 to 7.8%), and so were recoveries (84-110%). The linear relation was observed from 1 to 500 microg/kg for pesticides and 0.3 to 200 microg/kg for PAHs; also, the determination coefficient, R(2), was better than 0.995 in all instances. The proposed method was applied to the routine analysis of PAH and pesticide residues in virgin and refined olive oil and olive-pomace oil samples.     

Solid-phase clean-up in the liquid chromatographic determination of polycyclic aromatic hydrocarbons in edible oils

A solid-phase extraction (SPE) method for sample clean-up, followed by reversed-phase high-performance liquid chromatography (HPLC) with fluorescence detection is reported for the determination of polycyclic aromatic hydrocarbons (PAHs) in edible oils. The effects of experimental variables, such as washing and elution solvents, sample solvent and drying time have been studied using C18 cartridges. Recoveries and selectivity using other sorbent materials (C8, C2, CH, PH and NH2) were also examined, with C18 being the best one. The recoveries ranged between 50 and 103% depending on the molecular mass of the PAH. The limits of quantitation were lower than 1 ng/g for most PAHs and good precision was achieved. The method was validated using certified reference materials.     

超临界流体萃取环境模拟样品中多环芳烃的收集方法研究

详细系统地研究了收集溶剂的种类、用量及无溶剂固体表面冷冻捕集等方法对离线收集超临界流体萃取多环芳烃组分效率的影响。研究发现,二氯甲烷和丙酮的收集效率较高,其回收率为６１．４４％～１０５．４０％,其它有机溶剂效果较差。而且,当收集溶剂的液面高度大于２．０ｃｍ时,溶剂的用量对收集效率没有明显的影响。玻璃珠固体表面冷冻捕集效果较好,其回收率在６０．９８％～１０９．８８％之间,但其精密度较差,相对标准偏差（ＲＳＤ）在０．２８％～１１．２９％之间。     

Analysis of alkyl and 2-6-ringed polycyclic aromatic hydrocarbons by isotope dilution gas chromatography/mass spectrometry. Quality assurance and determination in Spanish river sediments

An accurate, precise and sensitive method is described for the analysis of 29 polycyclic aromatic hydrocarbons (PAHs), including 19 2-6-ringed PAHs and 10 alkyl-PAHs. The method is based on an isotope dilution technique using gas chromatography/mass spectrometry (GC/MS) and available labeled PAHs as internal standards. Quality parameters were calculated with satisfactory results and 36 Spanish river sediments were analysed. Results were evaluated regarding to the sediment quality guidelines (SQGs) based on the effects range-low (ERL) and the effects range-median (ERM) values. Most analysed sediments showed a good quality, since only 7 of them exceeded ERL values, including one sample surpassing ERM values. PAH profiles were studied in order to identify PAH sources as mainly petrogenic or pyrogenic. Most samples showed petrogenic-type fingerprints, although 6 of the 11 sediments with the highest PAH concentrations (> 1000 ng/g) were classified as pyrogenic, including 4 of the 7 samples exceeding ERL values. Quality assurance was carried out by the triplicate analysis of one preanalysed river sediment without PAHs subsequently spiked at a medium (500 ng/g) and a low concentration level (10 ng/g) of each analyte. Main quality requirements for methods based on isotope dilution were accomplished. Method accuracy was 80-120% for most PAHs, method precision was <15% for all the analysed compounds and method detection limits (MDLs) were 1-3 ng/g.     

Identification, characterization and quantitation of pyrogenic polycylic aromatic hydrocarbons and other organic compounds in tire fire products

On 15 August 2001, a tire fire took place at the Pneu Lavoie Facility in Gatineau, Quebec, in which 4000 to 6000 new and recycled tires were stored along with other potentially hazardous materials. Comprehensive gas chromatography-mass spectrometry (GC-MS) analyses were performed on the tire fire samples to facilitate detailed chemical composition characterization of toxic polycyclic aromatic hydrocarbons (PAHs) and other organic compounds in samples. It is found that significant amounts of PAHs, particularly the high-ring-number PAHs, were generated during the fire. In total, 165 PAH compounds including 13 isomers of molecular weight (MW) 302, 10 isomers of MW 278, 10 isomers of MW 276, 7 isomers of MW 252, 7 isomers of MW 228, and 8 isomers of MW 216 PAHs were positively identified in the tire fire wipe samples for the first time. Numerous S-, O-, and N-containing PAH compounds were also detected. The identification and characterization of the PAH isomers was mainly based on: (1) a positive match of mass spectral data of the PAH isomers with the NIST authentic mass spectra database; (2) a positive match of the GC retention indices (I) of PAHs with authentic standards and with those reported in the literature; (3) agreement of the PAH elution order with the NIST (US National Institute of Standards and Technology) Standard Reference Material 1597 for complex mixture of PAHs from coal tar; (4) a positive match of the distribution patterns of PAH isomers in the SIM mode between the tire fire samples and the NIST Standard Reference Materials and well-characterized reference oils. Quantitation of target PAHs was done on the GC-MS in the selected ion monitoring (SIM) mode using the internal standard method. The relative response factors (RRF) for target PAHs were obtained from analyses of authentic PAH standard compounds. Alkylated PAH homologues were quantitated using straight baseline integration of each level of alkylation.     

Static subcritical water extraction with simultaneous solid-phase extraction for determining polycyclic aromatic hydrocarbons on environmental solids

A rapid and very simple method for extracting polycyclic aromatic hydrocarbons (PAHs) from soils, sediments, and air particulate matter has been developed by coupling static subcritical water extraction with styrene-divinylbenzene (SDB-XC) extraction discs. Soil, water, and the SDB-XC disc are placed in a sealed extraction cell, heated to 250 degrees C for 15 to 60 min, cooled, and the PAHs recovered from the disc with acetone/methylene chloride. If the cells are mixed during heating, all PAHs with molecular weights from 128 to 276 are quantitatively (>90%) extracted and collected on the sorbent disc and are then recovered by shaking with acetone/methylene chloride. After water extraction, the sorbent discs can be stored in autosampler vials without loss of the PAHs, thus providing a convenient method of shipping PAH extracts from field sites to the analytical laboratory. The method gives good quantitative agreement with standard Soxhlet extraction, and with certified reference materials for PAH concentrations on soil, sediment (SRM 1944), and air particulate matter (SRM 1649a).     

Comparison of immunoassay and gas chromatography-mass spectrometry for measurement of polycyclic aromatic hydrocarbons in contaminated soil

Polycyclic aromatic hydrocarbons (PAHs) are frequently encountered in the environment and may pose health concerns due to their carcinogenicity. A commercial enzyme-linked immunosorbent assay (ELISA), was evaluated as a screening method for monitoring PAHs at contaminated sites. The ELISA was a carcinogenic PAH (C-PAH) RaPID assay testing kit that cross-reacts with several PAHs and utilizes benzo[a]pyrene (BaP) as a calibrator. Soil samples were extracted with 50% acetone in dichloromethane (DCM) for analysis by ELISA and gas chromatography-mass spectrometry (GC-MS). The overall method precision was within ±30% for ELISA and within ±20% for GC-MS. Recovery data for spiked soils ranged from 46 to 140% for BaP as determined by ELISA. Recoveries data of the GC-MS surrogate standards, 2-fluorobiphenyl and chrysene, were greater than 70%. The GC-MS procedure detected a total of 19 priority PAHs (2-6-ring PAHs) including seven probable human carcinogens (4-6-ring B2-PAHs). The ELISA results were compared to GC-MS summation results for the total 19 target PAHs as well as for the subset of the seven B2-PAH compounds. For all soil samples, the PAH concentrations derived from ELISA were greater than the sum of B2-PAH concentrations obtained by GC-MS. ELISA determinations were also frequently greater than the results obtained by GC-MS for the total 19 PAH compounds. This discrepancy can be expected, since the ELISA is a screening assay for the detection of several related PAHs while the GC-MS procedure detects priority PAH compounds. Thus, only a subset of PAHs (e.g. 19 PAHs) in the soil samples were measured by GC-MS while additional PAHs, including alkylated PAHs, and PAH derivatives have been demonstrated to be cross-reactive in the C-PAH ELISA. Results of paired tests show that the PAH data from ELISA and GC-MS methods are significantly different (P<0.001), but highly correlated. The ELISA data had a strong positive relationship with the GC-MS summation data for the B2-PAHs as well as for the 19 PAHs targeted by the GC-MS method. Results indicate that the ELISA may be useful as a broad screen for monitoring PAHs in environmental samples.     

Application of an automatic thermal desorption–gas chromatography–mass spectrometry system for the analysis of polycyclic aromatic hydrocarbons in airborne particulate matter

The application of the thermal desorption (TD) method coupled with gas chromatography–mass spectrometry (GC–MS) to the analysis of aerosol organics has been the focus of many studies in recent years. This technique overcomes the main drawbacks of the solvent extraction approach such as the use of large amounts of toxic organic solvents and long and laborious extraction processes. In this work, the application of an automatic TD–GC–MS instrument for the determination of particle-bound polycyclic aromatic hydrocarbons (PAHs) is evaluated. This device offers the advantage of allowing the analysis of either gaseous or particulate organics without any modification. Once the thermal desorption conditions for PAH extraction were optimised, the method was verified on NIST standard reference material (SRM) 1649a urban dust, showing good linearity, reproducibility and accuracy for all target PAHs. The method has been applied to PM10 and PM2.5 samples collected on quartz fibre filters with low volume samplers, demonstrating its capability to quantify PAHs when only a small amount of sample is available.     

Quantitative analysis of polycyclic aromatic hydrocarbons using high-performance liquid chromatography-photodiode array-high-resolution mass spectrometric detection platform coupled to electrospray and atmospheric pressure photoionization sources

Polycyclic aromatic hydrocarbons (PAHs) are common pollutants present in atmospheric aerosols and other environmental mixtures. They are of particular air quality and human health concerns as many of them are carcinogenic toxins. They also affect absorption of solar radiation by aerosols, therefore contributing to the radiative forcing of climate. For environmental chemistry studies, it is advantageous to quantify PAH components using the same analytical technics that are commonly applied to characterize a broad range of polar analytes present in the same environmental mixtures. Liquid chromatography coupled with photodiode array and high-resolution mass spectrometric detection (LC-PDA-HRMS) is a method of choice for comprehensive characterization of chemical composition and quantification of light absorption properties of individual organic compounds present in the environmental samples. However, quantification of non-polar PAHs by this method is poorly established because of their imperfect ionization in electrospray ionization (ESI) technique. This tutorial article provides a comprehensive evaluation of the quantitative analysis of 16 priority pollutant PAHs in a standard reference material using the LC–MS platform coupled with the ESI source. Results are further corroborated by the quantitation experiments using an atmospheric pressure photoionization (APPI) method, which is more sensitive for the PAH detection. The basic concepts and step-by-step practical guidance for the PAHs quantitative characterization are offered based on the systematic experiments, which include (1) Evaluation effects of different acidification levels by formic acid on the (+)ESI-MS detection of PAHs. (2) Comparison of detection limits in ESI+ versus APPI+ experiments. (3) Investigation of the PAH fragmentation patterns in MS² experiments at different collision energies. (4) Calculation of wavelength dependent mass absorption coefficient (MAC_λ) of the standard mixture and its individual PAHs using LC-PDA data. (5) Assessment of the minimal injected mass required for accurate quantification of MAC_λ of the standard mixture and of a multi-component environmental sample.     

Comparison of quantitative analytical methods in headspace gas chroamtography of residual solvents

Summary The aim of this work was to compare quantitative methods used for headspace gas chromatographic analysis of residual solvents in standard aqueous solutions and to apply the methods to the analysis of medicines. We found that all three quantitative methods (external standard, ESTD; internal standard, ISTD; and standard addition, ASTD) enable determination of the total amount of solute in the equilibrated system by analysis of defined volumes of headspace gas. The results showed that the ISTD method is more precise than ESTD and ASTD when there is no strong interaction between the residual solvents and the pharmaceutical base material. When, however, there is a strong polarpolar interaction between them, the ESTD and ISTD methods give worse results than the ASTD method, because the ASTD method can eliminate the matrix effect. Presented at Balaton Symposium on High Performance Separation Methods, Siófok, Hungary, September 1–3, 1999     

Determination of Polycyclic Aromatic Hydrocarbons in Mangrove Sediments: Comparison of Two Internal Standard Surrogate Methods and Quality-Control Procedures

Two internal standard surrogate (ISS) methods, ISS-I (with m-terphenyl as a single ISS) and ISS-2 (using five deuterated PAHs as a multi-ISS), for the determination of polycyclic aromatic hydrocarbons (PAHs) in mangrove sediments were compared. The recovery percentages of 16 PAHs except naphthalene in HS-6 (a certified reference material) were high, ranging from 69.3 to 111.8% for ISS-1 and from 71.8 to 120.3% for the ISS-2 method. Similarly, the PAH recovery percentages in spiked mangrove sediments and clean sand were lower for ISS-I than for ISS-2, but both methods met the accurate acceptance criteria for PAH recoveries. The reproducibility (i.e. the method precision) between the two ISS methods was also comparable and satisfactory, with relative standard deviation values in most cases within 20% of the data variability. These results indicate that both ISS methods were acceptable for the determination of PAHs in mangrove sediments, despite the fact that the matrix of mangrove sediments may interfere with the PAH recovery efficiency.     

Rapid screening of polycyclic aromatic hydrocarbons and fingerprinting of environmental materials by laser-excited fluorescence spectrometry

Laser-excited fluorescence of aromatic molecular vapors in a graphite furnace has been used as a rapid screening method for polycyclic aromatic hydrocarbons (PAHs) in various sample types and as a fingerprinting technique for crude oils, petroleum products and particulate matter. The simplicity and speed of the method indicate that it will be a useful method for PAH screening.     

Extractions with superheated water

As the temperature of liquid water is raised under pressure, between 100 and 374 degrees C, the polarity decreases markedly and it can be used as an extraction solvent for a wide range of analytes. Most interest has been in its application for the determination of PAHs, PCBs, and pesticides from environmental samples, where it gives comparable results to Soxhlet extraction but more rapidly and without the use of significant volumes of organic solvents. Unlike SPE, n-alkanes are not extracted unless the pressure is reduced and steam is used. Other applications have included the extraction of essential oils from plant material where it preferentially extracts the economically more important oxygenated components compared to steam distillation. The aqueous extract has been concentrated in a number of different methods (solvent extraction, SPE, SPME, extraction disc) or the extraction can be linked on-line to LC or GC. In many cases the superheated water extraction is cleaner, faster and cheaper than the conventional extraction methods.     

Determination of trace PAHs in seawater and sediment pore-water by solid-phase microextraction (SPME) coupled with GC/MS

A fast and reliable method for the determination of trace PAHs (polynuclear aromatic hydrocarbons) in seawater by solid-phase microextraction (SPME) followed by gas chromatographic (GC) analysis has been developed. The SPME operational parameters have been optimized, and the effects of salinity and dissolved organic matter (DOM) on PAHs recoveries have been investigated. SPME measures only the portion of PAHs which are water soluble, and can be used to quantify PAH partition coefficient between water and DOM phases. The detection limits of the overall method for the measurement of sixteen PAHs range from 0.1 to 3.5 ng/g, and the precisions of individual PAH measurements range from 4% to 23% RSD. The average recovery for PAHs is 88.2±20.4%. The method has been applied to the determination of PAHs in seawater and sediment porewater samples collected in Jiaozhou Bay and Laizhou Bay in Shandong Peninsula, China. The overall levels of PAHs in these samples reflect moderate pollution compared to seawater samples reported elsewhere. The PAH distribution pattern shows that the soluble PAHs in seawater and porewater samples are dominated by naphthalenes and 3 ring PAHs. This is in direct contrast to those of the sediment samples reported earlier, in which both light and heavy PAHs are present at comparable concentrations. The absence of heavy PAHs in soluble forms (<0.1-3.5 ng/L) is indicative of the strong binding of these PAHs to the dissolved or solid matters and their low seawater solubility.     

An experimental design approach to optimise the determination of polycyclic aromatic hydrocarbons from rainfall water using stir bar sorptive extraction and high performance liquid chromatography-fluorescence detection

Stir bar sorptive extraction (SBSE) followed by HPLC-fluorescence detection (FLD) was optimised for analysing 15 polycyclic aromatic hydrocarbons (PAHs) from water samples, especially rainfall water with low PAH content. The literature data described widely different experimental conditions for the extraction of PAHs by SBSE. A chemometric approach was therefore used to evaluate the statistically influential and/or interacting factors, among those described in the literature, and to find the best extraction and desorption conditions. Among six factors studied in a 2(6-2) fractional factorial design, only sample volume, extraction time and the interaction between both of them had significant effects on the PAH extraction recoveries. Optimal sample volume of 10 mL and extraction time of 140 min were obtained with a response surface design. For the desorption conditions, a Box-Behnken design showed that desorption time, temperature and PAH concentrations had significant effects. The best conditions were two successive desorptions with 100 microL of acetonitrile for 25 min at 50 degrees C. The optimised method was repeatable (RSD< or =5.3% for 50 ng L(-1) spiked water and < or =12.8% for 5 ng L(-1) spiked water), linear (R(2)> or =0.9956), with quantitative absolute recoveries (> or =87.8% for 50 ng L(-1) spiked water), and with the LOD between 0.2 and 1.5 ng L(-1). The optimised method was successfully applied to six-rainfall water samples collected in a suburban area. The total PAHs concentrations studied ranged from 31 to 105.1 ng L(-1). Seasonal variation was observed and on average three PAHs were at the highest concentrations (phenanthrene, fluoranthene and pyrene).     

Polycyclic aromatic hydrocarbon analysis in different matrices of the marine environment

Polycyclic aromatic hydrocarbons (PAHs) were determined in marine samples of various types, i.e. seawater, sediment and mussel homogenate samples. The samples were spiked with standard PAH mixtures in both polar (acetonitrile) and non-polar (i-octane) solvents, then extracted. Extraction from seawater was performed by liquid/liquid extraction to hexane (LLE) and with solid phase extraction (SPE) discs. The water samples were filtered and unfiltered seawater, and redistilled water for comparison. The discs with PAHs adsorbed from water samples, and also the sediment and mussel homogenate samples, were extracted with acetonitrile by sonication. PAHs in the disc extracts and from the LLE were cleaned-up using TLC and next determined by GC/MS/IT (with ion-trap) and HPLC-DAD/UV. The analytical procedures were verified with deuterated PAH standard mixtures. The large differences in PAH recoveries (from 12 to 86% for sum, and from 3 to 135% for particular PAHs) do not depend solely on the type of matrix and analytical procedure applied (e.g. standard solvent, volume of evaporated sample), but also on the concentration and molecular structure of the analyte. Usually, only a fraction of each PAH content in the matrix is determined, depending on the particulate matter in seawater and the sorption properties of the solid matrix. The recoveries of deuterated PAHs are higher than those of non-deuterated compounds.