Ce掺杂对SnO2薄膜电学及气敏性能的影响

以无机盐ＳｎＣｌ２．２Ｈ２Ｏ（Ｎ４）３Ｃｅ（ＮＯ３）６为原料，无水乙醇为溶剂，采用溶胶－凝胶工艺制备了纯ＳｎＯ２及ＳｎＯ２：Ｃｅ薄膜。研究了ＳｎＯ２：Ｃｅ薄膜的热分解晶化过程和Ｃｅ掺杂和ＳｎＯ２薄膜的及气敏性能的影响，发现ＳｎＯ２：Ｃｅ薄膜在常温下对Ｈ２Ｓ气体具有较妇的敢敏性能，对ＳｎＯ２：Ｃｅ薄膜的结构进行了表征。     

SO2-4/Z4O2-TiO2-SiO2固体酸催化苯乙烯选择氧化反应的研究

制备了一种ＳＯ＾２－４促进的金属氧化物固体酸ＳＯ＾２－４／ＺｒＯ２－ＴｉＯ２－ＳｉＯ２,并将其用于催化Ｃ６Ｈ５Ｃ２Ｈ３的选择氧化反应,发现该新型固体酸具有较高的活性和选择性,Ｃ６Ｈ５Ｃ２Ｈ３转化率达１０．７３％,Ｃ６Ｈ５Ｃ２Ｈ５Ｏ选择性达２０．７３％。用ＩＲ,ＸＲＤ等方法进行的表征表明,反应的选择氧化活性位可能含有Ｚｒ,Ｓｉ,Ｏ,Ｔｉ等成分。     

高碲酸合铜（Ⅱ,Ⅲ）配合物的合成和性质

在Ｈ６ＴｅＯ６／ＫＯＨ水溶液中以臭氧为氧化剂，将二价铜化合物氧化成三价铜化合物，并获得一个新的三价铜化合物Ｂａ４Ｋ［Ｃｕ（Ｈ２ＴｅＯ６）２］（ＯＨ）４．６Ｈ２Ｏ；描述了碱性溶液中“Ｃｕ（Ⅲ）／Ｃｕ（Ⅲ）”循环伏安图。对铜（Ⅲ）化合物，Ｎａ４Ｈ［Ｈ２ＴｅＯ６）２］．１７Ｈ２Ｏ以及相应的铜（Ⅱ）配合物的电子光谱和Ｃｕ２ｐＸＰＳ进行了研究，给出了其配位场场强参数和Ｃｕ２ＰＸＰＸ的电子结合能。由于价态升高     

Magnetic Properties of Phenoxy－Bridged Binuclear Iron－Thiolato Complexes and Structure of （Et_4N）_2［Fe_2（o－OC_6H_4S）_2（o－OC_6H_4SH）_2］

ＭａｇｎｅｔｉｃＰｒｏｐｅｒｔｉｅｓｏｆＰｈｅｎｏｘｙ－ＢｒｉｄｇｅｄＢｉｎｕｃｌｅａｒＩｒｏｎ－ＴｈｉｏｌａｔｏＣｏｍｐｌｅｘｅｓａｎｄＳｔｒｕｃｔｕｒｅｏｆ（Ｅｔ_４Ｎ）_２［Ｆｅ_２（ｏ－ＯＣ_６Ｈ_４Ｓ）_２（ｏ－ＯＣ_６Ｈ_４ＳＨ）_２］ＸＩＥＸｉ?..     

二氧化钛基固体超强酸的结构及其光催化氧化性能

采用溶胶－凝胶法制备了多孔性,大比表面积的ＳＯ４＾２－／ＴｉＯ２固体超强催化剂,运用ＸＲＤ,ＢＥＴ比表面积测定,ＸＰＳ和ＵＶ－Ｖｉｓ反射光谱等技术对该催化剂的结构,表面状态以及半导体特征进行了表征,并通过ＣＨ３Ｂｒ,Ｃ６Ｈ６和Ｃ２Ｈ４等典型有机物的气相光催化氧化反应。     

DIRECT ELECTROCHEMICAL SYNTHESIS AND CHARACTERIZATION OF SAMARIUM （Ⅲ） COMPLEX WITH 2－HYDROXY－2， 4， 6－CYCLOHEPTATRIENONE （TROPOLONE）

ＤＩＲＥＣＴ ＥＬＥＣＴＲＯＣＨＥＭＩＣＡＬ ＳＹＮＴＨＥＳＩＳ ＡＮＤ ＣＨＡＲＡＣＴＥＲＩＺＡＴＩＯＮ ＯＦ ＳＡＭＡＲＩＵＭ （Ⅲ） ＣＯＭＰＬＥＸ ＷＩＴＨ ２－ＨＹＤＲＯＸＹ－２，４，６－ＣＹＣＬＯＨＥＰＴＡＴＲＩＥＮＯＮＥ （ＴＲＯＰＯＬ...     

SYNTHEIS， SITUCTURE AND CHARACTERIZATION OF BINUCLEAR Cu（II） COMPLEX ［Cu（C_6H_5COO）_2（C_5H_6N_2）］_2．（C_4H_8O）_2

ＳＹＮＴＨＥＩＳ，ＳＩＴＵＣＴＵＲＥＡＮＤＣＨＡＲＡＣＴＥＲＩＺＡＴＩＯＮＯＦＢＩＮＵＣＬＥＡＲＣｕ（ＩＩ）ＣＯＭＰＬＥＸ［Ｃｕ（Ｃ_６Ｈ_５ＣＯＯ）_２（Ｃ_５Ｈ_６Ｎ_２）］_２．（Ｃ_４Ｈ_８Ｏ）_２￥ＲｕｉＮａＹＡＮＧａｎｄＤｏｕＭａｎＪＩＮ（Ｈｅｎａ...     

Synthesis and Crystal Structure of［Na（DB18C6）（H_2O）_2］_2Mo_6O_（19）·3DMF·2CH_3OH

ＳｙｎｔｈｅｓｉｓａｎｄＣｒｙｓｔａｌＳｔｒｕｃｔｕｒｅｏｆ［Ｎａ（ＤＢ１８Ｃ６）（Ｈ_２Ｏ）_２］_２Ｍｏ_６Ｏ_（１９）·３ＤＭＦ·２ＣＨ_３ＯＨＬｕＸｉａｏ－Ｍｉｎｇ；ＺｈａｏＹａ－Ｐｉｎｇ；ＱｕＥｒ－Ｌｉｎｇ；ＸｉａｏＬｉｎｇ－Ｍｅｉ；ＬｉｕＳｈｕ...     

SYNTHESIS AND CRYSTAL STRUCTURE OF [Na (DB18C6) (CH_3OH)]_2W_6O_(19) (DB18C

ＳＹＮＴＨＥＳＩＳＡＮＤＣＲＹＳＴＡＬＳＴＲＵＣＴＵＲＥＯＦ［Ｎａ（ＤＢ１８Ｃ６）（ＣＨ_３ＯＨ）］_２Ｗ_６Ｏ_（１９）（ＤＢ１８Ｃ６）·（ＣＨ_３ＯＨ）ＸｉａｏＭｉｎｄＬＵ；ＨｕｉＪｕＺＨＵ；ＳｈｕｎＣｈｅｎｇＬＩＵ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍ?..     

THE SYNTHESIS AND CRYSTAL STRUCTURE COMPLEX OF SCHIFF BASE CONTAINING S·N－Cd_3｜CH_3O（O）C_6H_3CH＝NNHC（S）NH_2｜4·（CH_3COO_2·1／2［CH_3S（O）CH_3］·2H_2O

ＴＨＥＳＹＮＴＨＥＳＩＳＡＮＤＣＲＹＳＴＡＬＳＴＲＵＣＴＵＲＥＣＯＭＰＬＥＸＯＦＳＣＨＩＦＦＢＡＳＥＣＯＮＴＡＩＮＩＮＧＳ·Ｎ－Ｃｄ_３｜ＣＨ_３Ｏ（Ｏ）Ｃ_６Ｈ_３ＣＨ＝ＮＮＨＣ（Ｓ）ＮＨ_２｜４·（ＣＨ_３ＣＯＯ_２·１／２［ＣＨ_３Ｓ（Ｏ）ＣＨ_３］·?..     

Ca2+xLa8-x(SiO4)6O2-0.5x的合成及其导电机理

Ca2+xLa8-x(SiO4)6O2-0.5x的合成及其导电机理;溶胶凝胶法;硅酸盐氧基磷灰石;空位导电机理;电化学阻抗谱     

Bi-Mo-Nb复合氧化物的结构与对丙烯氧化的催化活性

本文用XRD, IR, Raman, SEM和ESR等方法研究了系列氧化物Bi~2Mo~3-3XNb~2xO~12-4X(X=0.00, 0.02, 0.05, 0.10, 0.15, 0.20, 0.25) 的结构和对丙烯氧化的催化活性。结果表明, 在X<0.25范围内, 催化剂基本保持典型的α-Bi~2Mo~3O~12结构, 少量Nb^5+的掺杂, 可取代晶格中的Mo^6+, 产生氧空位,无序分布的氧空位的浓度先随X值的增加而增加, 当X=0.15时达到最大值, 催化剂对丙烯氧化的催化活性与这种氧空位的浓度成正比, 反应遵循Redox机理。     

Effects of thermal annealing on the structural and optical properties of Mg(x)Zn(1-x)O nanocrystals

Mg(x)Zn(1-x)O ternary alloy nanocrystals with hexagonal wurtzite structures were fabricated by using the sol-gel method. X-ray diffraction patterns, UV-vis absorption spectra, and photoluminescence spectra were used to characterize the structural and optical properties of the nanocrystals. For as-prepared nanocrystals, the band gap increases with increasing Mg content. Weak excitonic emission with strong deep-level emission related to oxygen vacancy and interface defects is observed in the photoluminescence spectra at room temperature. Thermal annealing in oxygen was used to decrease the number of defects and to improve the quality of the nanocrystals. In terms of XRD results, the grain sizes of nanocrystals increase with increasing annealing temperature and the lattice constants of alloy are smaller than those of pure ZnO. The band gap becomes narrower with increasing annealing temperature. For Mg(x)Zn(1-x)O nanocrystals (x=0.03-0.15) annealed at temperatures ranging from 500 to 1000 degrees C, intense near-band-edge (NBE) emissions and weak deep-level (DL) emissions are observed. Consequently, the quality of Mg(x)Zn(1-x)O nanocrystals can be improved by thermal annealing.     

Crystal structure and carbon vacancy hardening of (W0.5Al0.5)C1-x prepared by a solid-state reaction.

Novel solid solutions of aluminum in tungsten carbide (WC) with or without carbon vacancies, which can be expressed by the chemical formula (W(0.5)Al(0.5))C(1-x) (x=0.0-0.5), have been synthesized by the solid-state reaction of W(0.5)Al(0.5) alloy and the proper amount of carbon at around 1673 K in vacuum. The reaction time decreases from 73 to 50 h on increasing the carbon vacancy concentration from 0 to 50 %. The formation of the intended products is certified, by X-ray diffraction, environmental scanning electron microscopy-energy-dispersive X-ray analysis, and inductively coupled plasma-atomic emission spectroscopy, even though the carbon vacancy concentration reaches the astonishing value of 50 %. The as-prepared (W(0.5)Al(0.5))C(1-x) samples have been identified as the hexagonal WC-type structure belonging to the space group P6m2 (Z=1). Moreover, the crystallographic results reveal that the substituting aluminum atoms in the WC are located in the 1a site (the W atom position of the WC structure) and the cell parameters decrease slightly with increasing vacancy concentration. The hardness of the (W(0.5)Al(0.5))C(1-x) system increases up to a maximum 2659 kg mm(-2) at a carbon vacancy concentration of about 35 %, and the density of (W(0.5)Al(0.5))C(1-x) is far lower than that of WC.     

新型固体电解质Ce5.2RE0.8MoO15-δ 的合成及电性质

采用溶胶-凝胶方法合成了系列新型氧化物Ce5.2RE0.8MoO15-δ(RE=Ce, Y, La, Sm, Gd, Dy, Ho, Er). 通过XRD, Raman和XPS等手段对氧化物的结构进行了表征, 采用交流阻抗谱测试其导电性能. 研究结果表明, RE3+的掺杂可增加氧离子的空位浓度, 改善母体电导率, 晶胞参数随RE3+半径的增大而增大. 掺杂离子Dy3+的半径(0.0908 nm) 与母体基质离子Ce4+的半径(0.0920 nm) 相近, 形成的掺杂氧化物晶格弹性应变最小, RE3+与氧空位间的缔合焓(ΔHA)最小, 因而氧化物Ce5.2Dy0.8MoO15-δ具有相对较高的电导率(7.02×10-3 S/cm)和较低的激活能(1.056 eV).     

Ce0.8Gd0.2-xPrxO1.9固溶体的合成与表征

利用X射线衍射(XRD)、拉曼光谱(Raman)、X射线光电子能谱(XPS)和交流阻抗谱对溶胶-凝胶法制备的稀土双掺杂固溶体Ce0.8Cd0.2-xPrxO1.9(x=0,0.02,0.10)的结构和导电性进行了研究.XRD结果表明,经800℃焙烧所得样品都形成了单相立方萤石结构,平均晶粒尺寸在23～30 nm之间;X...     

化学共沉淀法制备气敏材料Cd2+XSb2O6.8

采用化学共沉淀法,以可溶性的镉盐和三价锑盐为源物质、氢氧化物作共沉淀剂,在较宽的Cd/Sb摩尔配比范围内,制备出了具有缺陷烧绿石结构的镉锑复合氧化物Cd₂Sb₂O_6.8及其固溶体。研究了烧成条件对产物的影响,在较低温度(600℃)下得到了纯相Cd₂Sb₂O_6.8的超微粉,并对其高温反应机理进行了探讨。所得微粉产物制成的厚膜元件经气敏测试,发现n(Cd)/n(Sb)=1.10、 900 ℃、3 h烧成的间隙型固溶体Cd_2+XSb₂O_6.8,对乙炔气体具有非常优秀的气敏性能。     

The chemical nature of surface point defects on MoO3(010): adsorption of hydrogen and methyl.

We report density functional theory calculations using the Adaptive Coordinate Real-space Electronic Structure (ACRES) method of the terminal oxygen vacancy on the (010) surface of MoO3, within a (2 x 2) ordered array of vacancies on the surface. Analysis of the electronic structure of this surface shows that there are unoccupied dangling d(xz) and d(z)2 orbitals perpendicular to the surface that are created by the removal of terminal oxygen. The Mo-oxygen bonds surrounding the vacancy contract; however, the overall morphology of the surface is not drastically distorted. The vacancies alter the chemical character of the surface, as shown by studies of hydrogen and methyl binding. On both the "perfect" and vacancy surfaces, hydrogen was most strongly adsorbed over the terminal oxygen and most weakly bound over the symmetric bridging oxygen. Hydrogen is bound over the Mo atom, with a slightly smaller binding energy than hydrogen over the asymmetric bridging oxygen. The most favorable binding site for methyl on the vacancy surface is over the Mo atom exposed by removal of a terminal oxygen, whereas methyl bound to terminal oxygen is most stable on the perfect surface. There is no local minimum for adsorption over the symmetric bridging oxygen; instead, a methyl placed over this site moves toward the terminal oxygen vacancy. Analysis of the bonding shows that methyl is bound more strongly than hydrogen over the Mo atom because the C 2p orbital has better overlap with the Mo d(z)2 orbital than the hydrogen 1s. In addition, the steric repulsion observed for methyl over the perfect MoO3(010) surface is more easily relieved with the presence of the terminal oxygen vacancy.     

尖晶石锂锰氧结构中的氧缺陷及其修复方法

研究了氧缺陷型尖晶石锂锰氧化物的结构与电化学性能, 根据缺陷化学理论提出了弥补氧缺陷的办法. X射线衍射(XRD)结果表明, 在真空条件下于750 ℃焙烧不同时间后锂锰氧化物主要物相仍可保持尖晶石结构, 并伴随有少量Mn₃O₄和Li₂MnO₃杂相. 充放电测试及交流阻抗结果表明, 锂锰氧化物材料的放电容量随氧缺陷的增加而降低, 随着氧缺陷的增大, 表面膜阻抗及电荷传递阻抗增大、锂离子在锂锰氧固体中的嵌入与累积量减小使电化学性能恶化. 加入LiOH•H₂O和通入氧气焙烧可在一定程度上修复氧缺陷.     

A Mössbauer study of oxygen vacancy and cation distribution in 6H-BaTi1−xFexO3−x/2

We have synthesized samples in the system BaTi_1−xFe_xO_3−x/2 with x=0.1−0.6 at temperatures of 1200-1300°C under reducing conditions of oxygen fugacity. After drop quenching, samples were characterized using the electron microprobe, X-ray diffraction and Mössbauer spectroscopy. All samples were hexagonal with a 6H-BaTiO₃ type structure. Mössbauer spectroscopy showed all iron to be present as Fe³⁺, occurring in octahedral and pentahedral sites. Analysis of area ratios indicates that oxygen vacancies are distributed randomly over O1 sites, and that a random distribution of Fe and Ti cations over M1 and M2 sites is consistent with the data. No evidence for ordering of oxygen vacancies was found. Results are consistent with conductivity results, which show generally increasing ionic conductivity with increasing oxygen vacancy concentration.