Photoluminescence of an Yb3+/Al3+-codoped microstructured optical fibre

An Yb 3+ /Al 3+-codoped microstructured optical fibre is prepared based on photonic crystal fibre technology.The characteristic spectra of preforms and fibres are experimentally investigated.The results show that under a 971 nm excitation,besides the known infrared fluorescence luminescence around 1050 nm,a blue luminescence peak at 486 nm is obtained.Moreover,an unexpected emission peak at 730 nm is also observed.The photoluminescence mechanism of an Yb 3+ /Al 3+-codoped microstructured optical fibre is discussed.The emission peak at 486 nm is attributed to the cooperative upconversion resulting from pairs of Yb 3+ ions,and the emission peak around 730 nm is ascribed to the stimulated Raman scattering because of nonlinear effects of microstructured optical fibre.The Yb 3+ /Al 3+-codoped microstructured optical fibre is promising for varieties of applications from laser printing and optical recording to cancer treatments,such as photodynamic therapy.     

Ag微米管阵列修饰的聚合物光子晶体光纤制备工艺研究

以聚合物光子晶体光纤空气孔阵列为模板,制备了Ag微米管阵列修饰的聚合物光子晶体光纤.讨论了银氨溶液和葡萄糖溶液浓度以及反应时间和温度对银微米管形貌的影响.在Ag(NH3)+2与C6H6O浓度比为2,反应时间为20 min,温度为65℃条件下光纤孔洞表面获得了规则的Ag微米管状结构,并对Ag的生长机理进行了讨论.     

Semiconductor optical fibres: progress and opportunities

This paper reviews recent progress in the nascent field of semiconductor optical fibres, from the fundamentals through to device demonstration. The incorporation of semiconductor materials into both the step‐index and microstructured fibre geometries provides a route to introducing new optoelectronic functionality into existing glass fibre technologies. Herein, the various fabrication methods that have been developed as of to date are described, and their compatibility with the different semiconductor materials and fibre designs discussed. Results will be presented on the optical transmission properties of several fibre types, with particular attention being paid to the observation of nonlinear propagation in silicon core fibres. Finally, some speculation regarding the future prospects and applications of this new class of fibre will be provided.     

Fibre Bragg Gratings Inscribed in Homemade Microstructured Fibres

Fibre Bragg gratings （FBGs） are inscribed in homemade microstructured fibres by the standard phase mask method. Enhanced couplings between the forward fundamental mode and backward cladding modes are obtained. The mode coupling and spectral characteristics are investigated experimentally. The cladding mode resonances can be affected by filling active materials into the air holes, which will be useful for the implementation of tunable photonic devices in optical fibre communication and sensing systems.     

D-shape polymer optical fibres for surface plasmon resonance sensing

We experimentally studied three different D-shape polymer optical fibres with an exposed core for their applications as surface plasmon resonance sensors. The first one was a conventional D-shape fibre with no microstructure while in two others the fibre core was surrounded by two rings of air holes. In one of the microstructured fibres we introduced special absorbing inclusions placed outside the microstructure to attenuate leaky modes. We compared the performance of the surface plasmon resonance sensors based on the three fibres. We showed that the fibre bending enhances the resonance in all investigated fibres. The measured sensitivity of about 610 nm/RIU for the refractive index of glycerol solution around 1.350 is similar in all fabricated sensors. However, the spectral width of the resonance curve is significantly lower for the fibre with inclusions suppressing the leaky modes.     

Twin-hollow-core optical fibres

Twin-hollow-core microstructured optical fibres have been fabricated and characterised for the first time. The fibre cladding structure results in guidance by the inhibited coupling mechanism, in which there is a low overlap between the core modes and surrounding structure. This results in minimal interaction between the modes of each core in the transmission bands of the fibre and hence minimal coupling between the cores. It is shown that light is able to couple between the cores via coupling to cladding struts in the high loss wavelength bands.     

Non-linear applications of microstructured optical fibres

The enhancement of different non-linear processes in microstructured optical fibres can be achieved through manipulation of the dispersion characteristics of the fibre. This is demonstrated by extending the region of short wavelength operation of high power supercontinuum generation through four wave mixing in a cascaded fibre geometry where the dispersion of each fibre decreased on propagation. The technique is further refined in a demonstration utilizing long lengths of dispersion decreasing tapered microstructured fibres, where the supercontinuum extends to around 300 nm with spectral power densities in excess of 2 mW/nm in the uv. These long length tapers can also be utilized for adiabatic soliton pulse compression in new spectral regions, allowing the compression of 655 fs pulses to 45 fs.     

圆形双芯微结构色散补偿光纤的色散特性分析

提出了一种圆形双芯微结构光纤,用频域有限差分法(FDFD),并对其色散特性进行了分析,并与前人提出的六边形双芯微结构色散补偿光纤进行了比较。结果表明:当圆形双芯微结构色散补偿光纤的高折射率区半径保持不变时,改变沿水平直径方向相邻空气洞中心点间的距离和空气洞的直径,能够控制有效模折射率的转折点,并在该处产生较大的负色散。由于圆形双芯微结构色散补偿光纤比六边形双芯微结构色散补偿光纤的有效模折射率对参数变化较为敏感,故前者更易于精确地控制转折点,达到色散补偿的目的。     

Silver nanocrystals modified microstructured polymer optical fibres for chemical and optical sensing

In-fibre chemical and optical sensors based on silver nanocrystals modified microstructured polymer optical fibres (MPOFs) were demonstrated. The silver nanocrystals modified MPOFs were formed by direct chemical reduction of silver ammonia complex ions on the templates of array holes in the microstructure polymer optical fibres. The nanotube-like and nanoisland-like Ag-modified MPOFs could be obtained by adjusting the conditions of Ag-formation in the air holes of MPOFs. SEM images showed that the higher concentration of the reaction solution (silver ammonia 0.5 mol/L, glucose 0.25 mol/L), gave rise to a tubular silver layer in MPOF, while the lower concentration (silver ammonia 0.1 M, glucose 0.05 M) produced an island-like Ag nanocrystal modified MPOF. The tubular Ag-MPOF composite fibre was conductive and could be directly used as array electrodes in electrochemical analyses. It displayed high electrochemical activity on sensing nitrate or nitrite ions. The enhanced fluorescence of dye molecules was observed when the island-like Ag-modified MPOF was inserted into a fluorescent dye solution.     

Cleaving of microstructured polymer optical fibres

The issue of how best to cleave PMMA microstructured polymer optical fibres (mPOF) is addressed. The impact of the following parameters on the cleaving process is considered: (i) temperature of the cutting blade, (ii) temperature of the platen holding the fibre, (iii) time allowed for thermal equilibration between fibre and platen, (iv) blade speed, and (v) blade condition. The strong influence of a temperature-dependent phase transition in the polymer on the cleaving process is established. Optically acceptable mPOF end-faces can be achieved but only over a limited range of cleavage conditions.     

Squeezed light from microstructured fibres: towards free-space quantum cryptography

Amplitude-squeezed pulsed light has been produced using a microstructured silica fibre. By spectrally filtering after the non-linear propagation in the fibre a squeezing value of -1.7 dB has been measured. A quantum key distribution scheme based on squeezed light from such microstructured fibres is proposed. Received: 9 July 2001 / Published online: 23 November 2001     

Depolarization of light in microstructured fibers filled with liquid crystals

In the paper we analyze microstructured optical fibers filled with typical nematic liquid crystals, i.e., 5CB and 6CHBT under influence of external electric field or temperature. We use the modified Mueller matrix method with an additional depolarization matrix to calculate degree of polarization changes of the light propagating in the liquid-crystal infiltrated microstructured optical fibers. Preliminary experimental results of light depolarization measurements during propagation in these microstructured fibers are also presented.     

Efficient Technique to Control the Zero-Dispersion Wavelength of a Microstructured Optical Fiber

Abstract

An efficient technique to control the zero-dispersion wavelength of a microstructured optical fiber is proposed and numerically demonstrated in this article. This technique is based on the variation of the linear refractive index and the thickness of a thin film covering the microstructured optical fiber holes' inner surfaces. A powerful and accurate code based on a full-vector finite-element method formulation in conjunction with perfectly matched layers was used. A maximum of 570-nm zero-dispersion wavelength displacement is demonstrated. This thin film can be included after the microstructured optical fiber has been fabricated, as that means the zero dispersion of such fiber can be tailored as needed.     

基于高非线性微结构光纤的全光再生研究

提出了利用高非线性微结构光纤自相位调制效应进行全光再生的研究方案。分析了一组微结构光纤的色散和非线性特性。结果显示光纤的非线性系数与光纤结构有密切关系。通过减小有效模面积,可以提高光纤的非线性系数。采用一种高空气填充比的高非线性微结构光纤作为非线性介质,进行了基于自相位调制效应的全光再生研究。结果表明,由于微结构光纤的高非线性,采用较短的光纤长度就可以实现较好的再生效果。同时,输入微结构光纤的峰值功率、滤波器的参量选择对光再生的效果有重要的影响,它们必需满足一定要求,才能实现光再生。此外,对再生器的传输特性进行了研究。通过调整输入峰值功率和滤波器的参量,可以对不同宽度的光脉冲信号进行全光再生。     

Cleaved end-face quality of microstructured polymer optical fibres

The cutting of a microstructured polymer optical fibre to form an optical end-face is studied. The effect of the temperature and speed of the cutting blade on the end-face is qualitatively assessed and it is found that for fibres at temperatures in the range 70-90 °C, a blade at a similar temperature moving at a speed of less than 0.5 mm/s produces a good quality end-face. The nature of the damage caused by the cutting process was examined and found to vary with fibre temperature, blade quality and cut depth. Thermo-mechanical analysis showed that the drawn material was significantly more visco-elastic than the annealed raw material in the 70-90 °C temperature range. The behaviour of the surface damage with cut depth was found to be consistent with the behaviour of a visco-elastic material.     

Photoluminescence of an Yba＋/Al3＋-codoped microstructured optical fibre

An Yba＋/Al3＋-codoped microstructured optical fibre is prepared based on photonic crystal fibre technology. The characteristic spectra of preforms and fibres are experimentally investigated. The results show that under a 971 nm excitation, besides the known infrared fluorescence luminescence around 1050 nm, a blue luminescence peak at 486 nm is obtained. Moreover, an unexpected emission peak at 730 nm is also observed. The photoluminescence mechanism of an Yba＋/Al3＋-codoped microstructured optical fibre is discussed. The emission peak at 486 nm is attributed to the cooperative upconversion resulting from pairs of Yb3＋ ions, and the emission peak around 730 nm is ascribed to the stimulated Raman scattering because of nonlinear effects of microstructured optical fibre. The Yba＋/Al3＋-codoped microstructured optical fibre is promising for varieties of applications from laser printing and optical recording to cancer treatments, such as photodynamic therapy.     

Modal Analysis of Holey Fibres with Convex and Non-Convex Polygon-Shaped Holes

The plane wave and localized function expansion methods are established for bandgap and modal calculations of holey fibres. The calculations rely on evaluating the Fourier transform coefficients of the dielectric constant profile. In this paper we derive a generalized formula for determining these coefficients for holey fibres with holes of arbitrary polygonal shape. The accuracy of the Fourier representation is studied for different hole shapes rotated at various angles to the lattice. We combine the approach with the localized function method to study the modal properties of some holey fibres, reporting new numerical results on the influence of the hole shape on the modal and group velocity dispersion of microstructured fibres with rhombic holes aligned along radial lines.     

方形渐变空气孔微结构光纤的色散特性分析

提出了一种新型的方形分布渐变空气孔微结构光纤。借助时域有限差分法计算了孔间距取 2.0μm和2.5μm,最小孔直径分别取0.4μm、0.6μm、0.7μm、0.8μm和1.0μm,从第一层到第五层直径线性递增量分别为0.1μm/层和0.2μm/层的五层渐变空气孔微结构光纤的基模色散曲线图,结果表明渐变空气孔微结构光纤在控制色散的能力上明显优于空气孔不变的微结构光纤,这种光纤的色散曲线在1400~2000 nm波长范围内保持平坦且具有更低的色散量;当渐变空气孔微结构光纤第三层孔的直径取与孔直径不变微结构光纤的孔直径相同,且第一层到第五层孔直径按每层0.2μm的斜率增长时,其色散曲线最低最平坦,色散值保持在30 ps/(km·nm)左右。