还原剂对Au-Pd/CeO2催化剂甲醇部分氧化性能的影响

以PVP为保护剂,乙醇(ER)、乙二醇(GR)和水合肼(HR)为还原剂制备了一系列Au-Pd/CeO2催化剂,考察了还原剂对甲醇部分氧化性能的影响,并运用XRD、TPD和TPR等手段对催化剂进行了表征。结果表明,Au-Pd/CeO2(ER)催化剂具有较大的比表面积,形成的AuxPdy量较多、粒径较小、分散度较高、活性组分与载体的相互作用较强,同时对甲醇的吸附量较大和吸附温度较低。因此,该催化剂具有较高的催化活性和氢气选择性以及较低的CO质量分数。     

第二组分对Au/CeO2催化剂甲醇部分氧化性能的影响

本文研究了Pd、Pt、Ru和Ag对Au/CeO2催化剂以及Pd含量对Au-Pd/CeO2催化剂甲醇部分氧化性能的影响,并运用XRD、TPD和TPR等手段对Au/CeO2和Au-Pd/CeO2催化剂进行了表征.结果表明,Pd和Pt的加入能提高Au/CeO2催化剂的活性,而Ru和Ag的加入效果正好相反.不同的Au/Pd比对Au-Pd/CeO2催化剂的活性和H2选择性的影响不同,其中Au/Pd=60:40的效果最好,因为Au60Pd40/CeO2催化剂形成的富Au型AuxPdy较多,甲醇的吸附温度较低和对反应产物H2的吸附较少.     

ZnO对Au-Pd/CeO_2催化剂甲醇部分氧化制氢性能的影响

采用沉积沉淀法制备了Au-Pd双金属催化剂, 研究了ZnO对Au-Pd/CeO_2催化剂甲醇部分氧化性能的影响, 并运用N_2吸附、 XRD、 UV-Vis、 TPR、 H2-TPD和CO-IR等手段对催化剂进行了表征. 结果表明, ZnO的引入减少了Pd活性中心, 降低了催化剂的活性, 但提高了催化剂H2选择性和降低了CO选择性. Au-Pd/ZnO-CeO_2催化剂的TPR表明, 在约200℃时开始有部分ZnO被还原, CO-IR显示CO吸收峰移向低频, 这些结果表明Au-Pd/ZnO-CeO_2催化剂中Pd和Zn之间发生了相互作用. Pd和Zn之间相互作用抑制了Pd的甲醇分解活性, 有利于H2和CO_2的生成, 使Au-Pd/ZnO-CeO_2催化剂表现出较高的H2选择性和较低的CO选择性.     

SiO2负载Au-Pd双金属纳米颗粒催化甲醇选择性氧化合成甲酸甲酯

甲醇选择氧化制备甲酸甲酯（MF）是延伸甲醇产业链、开发高附加值下游产品的有效途径之一,负载型Au及Pd催化剂在这一反应中表现出优异的低温催化性能。为探索实用、高效和易再生的甲醇选择氧化催化剂,同时揭示双金属颗粒中Au和Pd的协同效应及甲醇氧化反应机理,本研究制备了一系列二氧化硅负载的Au-Pd催化剂（Au-Pd/SiO₂）,详细研究了其对甲醇选择氧化制甲酸甲酯的催化性能。结果表明,Au和Pd总负载量为0.6%、且Au/Pd质量比为2时,所制备的Au₂-Pd₁/SiO₂催化剂表现出优异的甲醇氧化催化性能;在130℃下,甲醇转化率达到57.0%,MF选择性为72.7%。多种表征结果显示,Au-Pd双金属纳米颗粒粒径为2-4 nm,高度分散于SiO₂载体表面,倾向于生成孪晶结构并暴露（111）晶面,这些因素是Au-Pd/SiO₂具有优异催化性能的主要原因。通过DRIFTS表征研究,提出了一个可能的MF生成机理：即甲醇首先与处于Au-Pd纳米粒子界面的表面氧作用,生成化学吸附的甲氧基;随后,甲氧基经去质子作用生成吸附的甲醛物种,后者与相邻的甲氧基物种亲核反应,并经β-H消除后得到目标产物MF。     

苯甲醇氧化制苯甲酸钠反应中金钯双金属催化剂的协同效应

研究了不同Au/Pd摩尔比的AuPd/CeO2双金属催化剂在苯甲醇氧化制苯甲酸及其钠盐反应中的催化活性,利用XRD,UV-Vis DRS,TEM和XPS等手段对催化剂的结构进行了系统考察.结果表明,Au-Pd纳米颗粒以合金形式分散在CeO2载体上,不同Au/Pd摩尔比会影响催化剂表面活性物种的粒径大小和尺寸分布,并改变催化剂表面物种的组成.Au-Pd之间的电子效应和协同效应显著影响其催化活性.当Au/Pd摩尔比为3时催化剂表现出最好的催化活性,苯甲酸产率可达92%.此外,双金属催化剂的催化活性显著优于单金属催化剂,主要归因于Au和Pd之间的协同效应.AuPd/CeO2催化剂还具有良好的稳定性,Au/Pd摩尔比为3的AuPd/CeO2催化剂使用7次后仍然具有较高的催化活性.     

苯甲醇氧化制苯甲酸钠反应中金钯双金属催化剂的协同效应

研究了不同Au/Pd摩尔比的AuPd/CeO2双金属催化剂在苯甲醇氧化制苯甲酸及其钠盐反应中的催化活性,利用XRD,UV-Vis DRS,TEM和XPS等手段对催化剂的结构进行了系统考察.结果表明,Au-Pd纳米颗粒以合金形式分散在CeO2载体上,不同Au/Pd摩尔比会影响催化剂表面活性物种的粒径大小和尺寸分布,并改变催化剂表面物种的组成.Au-Pd之间的电子效应和协同效应显著影响其催化活性.当Au/Pd摩尔比为3时催化剂表现出最好的催化活性,苯甲酸产率可达92%.此外,双金属催化剂的催化活性显著优于单金属催化剂,主要归因于Au和Pd之间的协同效应.AuPd/CeO2催化剂还具有良好的稳定性,Au/Pd摩尔比为3的AuPd/CeO2催化剂使用7次后仍然具有较高的催化活性.     

稀土改性Pd/Al2O3催化剂的性能:甲醇分解的活性和选择性

用稀土金属氧化物CeO2和La2O3改性γ-Al2O3担载Pd制备了一系列甲醇分解催化剂，并考察了Pd盐前驱体（氯盐或硝酸盐），稀土种类（镧或／和铈），经的含量（0％－30％），浸渍方法（顺序浸渍或共浸渍）地催化剂性能的影响。结果表明：CeO2能提高Pd/Al2O3催化剂的甲醇分解活性，La2O3能提高催化剂的CO和H2选择性，而CeO2和La2O3在γ-Al2O3上对Pd的催化性能表现出一种协同作用。在10％的La2O3和22％的CeO2共同改性的催化剂上，250℃，甲醇液体空速1.8h^-1条件下反应甲醇转化率达到91．4％，CO（H2）的选择性几乎为100％。     

不同温度焙烧的Au-Pd/SiO2催化剂上甲醇选择性氧化制备甲酸甲酯

以溶胶固定法制备了Au-Pd/SiO₂催化剂,考察了催化剂焙烧温度对甲醇选择氧化制甲酸甲酯反应性能的影响。在200~500℃,400℃焙烧的Au-Pd/SiO₂具有最好的低温催化性能,在室温下就有活性,反应温度为100℃时甲醇转化率为25.3%,甲酸甲酯的选择性为100%。采用BET、XRD、UV-vis DRS、XPS、TEM和DRIFTS技术对催化剂进行表征,结果表明,催化剂中活性组分Au和Pd的高分散性,合适的Au和Pd粒径,Au-Pd合金的形成以及Au和Pd之间的强相互作用力,有利于甲醇氧化为甲酸甲酯反应的进行。初步推测出了甲醇在Au-Pd/SiO₂上氧化为甲酸甲酯的反应机理,甲醇在Au-Pd/SiO₂催化剂上是通过甲氧基中间体得到甲酸甲酯的。     

Pt-CeO2/C催化剂对甲醇氧化的电催化活性

将CeO2溶胶与Pt/C催化剂机械混合制备了Pt-CeO2/C催化剂,研究了酸性条件下Pt-CeO2/C催化剂对甲醇氧化的电催化活性。结果表明,与Pt/C催化剂相比,Pt-CeO2/C催化剂对甲醇展现出更好的催化活性。XRD和TEM测试结果表明,Pt-CeO2/C催化剂中Pt与CeO2的平均粒径均为3~4 nm。对CeO2含量不同的Pt-CeO2/C催化剂在CH3OH-H2SO4中进行循环伏安测试发现,Pt-CeO2/C催化剂对甲醇氧化的电催化活性较高,其中Pt与CeO2质量比为1∶1时,催化剂的催化活性最高,对甲醇氧化的峰电流密度达到0.112 A/cm2。     

V/Ce-Al2O3催化甲醇选择性氧化制备二甲氧基甲烷

为有效改善催化剂酸性,利用共沉淀法对20V₂O₅/Al₂O₃催化剂载体进行Ce改性制备了不同CeO₂质量分数的双功能催化剂,并对其催化甲醇选择性氧化制二甲氧基甲烷（DMM）的活性进行了研究。由X射线衍射（XRD）、扫描电子显微镜（SEM-EDS）、傅里叶红外光谱（FT-IR）、拉曼光谱（Raman）、H₂程序升温还原（H₂-TPR）及NH₃程序升温脱附（NH₃-TPD）表征结果证实,经Ce改性后在催化剂中有效引入了中强酸位点是DMM选择性提高的关键因素,同时也增强了钒氧化物与载体间的相互作用,降低了催化剂的氧化还原性。实验结果表明,当CeO₂质量分数为8%时,催化剂表现出最佳的催化性能,反应温度对甲醇氧化产物有较大影响,低温更有利于DMM的生成。在反应温度为170 ℃时,经20V/8Ce-Al₂O₃催化,甲醇转化率为23.6%,DMM选择性达99.9%。催化剂经循环反应5次后DMM选择性依然为99.9%,研究为改善催化剂酸性提供了有价值的参考。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。