Factors influencing the electrokinetic injection of oligonucleotides in capillary gel electrophoresis when using laser‐induced fluorescence detection

Capillary gel electrophoresis (CGE) is a powerful tool for the analysis of oligonucleotides owing to its extraordinary resolving power. However, the only feasible injection mode for CGE, electrokinetic injection, can cause bias of the injected amount and thus reproducibility issues for CGE methods. Although the source of the bias in electrokinetic injection for analysis of small molecules by capillary zone electrophoresis has long been identified, there are very few studies on electrokinetic injection issues for biological molecules analyzed by CGE. In this study, we report three issues related to electrokinetic injection for oligonucleotides. First, the relationship between the injection amount and the sample solution resistance is not always linear for oligonucleotides, as has been observed for small molecules. Second, the injecting water prior to an oligonucleotide sample dramatically improves the reproducibility of both the injected amount and resolution through a ‘stacking‐like’ mechanism. Third, optimizing the gel concentration dramatically increases the amount of oligonucleotide that is injected into the column. Copyright © 2013 John Wiley & Sons, Ltd.     

Light-emitting diode induced fluorescence (LED-IF) detection design for a pen-shaped cartridge based single capillary electrophoresis system

CGE is a well-established separation technique for the analysis of biologically important molecules such as nucleic acids. The inherent high resolving power, rapid analysis times, excellent detection sensitivity, and quantification capabilities makes this method favorable compared to conventional manual polyacrylamide and agarose slab gel electrophoresis techniques. In this paper we introduce a novel single-channel capillary gel electrophoresis system with LED-induced fluorescence detection also utilizing a compact pen-shaped capillary cartridge design for automatic analysis of samples from a 96-well plate. To evaluate the suitability of the system, 1000 genomic DNA(gDNA) samples were analyzed in gel filled capillaries and detected by the microball ended excitation and emission optical fiber based LED-induced fluorescence detection system. Excellent migration time reproducibility of RSD <0.75% was obtained over the course of 1000 runs. The system rapidly distinguished between intact and degraded gDNA samples, therefore provided important information if they could be used for downstream quantitative PCR processing where high-quality intact gDNA was key. We envision that this novel system design will rapidly find new applications in both research and clinical diagnostic laboratories as a highly sensitive and easy to use bio-analytical approach.     

Identification, quantitation, and characterization of biomolecules by capillary electrophoretic analysis of binding interactions

The high resolving power of capillary electrophoresis combined with the specificity of binding interactions may be used with advantage to characterize the structure-function relationship of biomolecules, to quantitate specific analytes in complex sample matrices, and to determine the purity of pharmaceutical and other molecules. We here review recent and innovative methodologies and applications of high resolution affinity electrophoresis within the fields of binding constant determination, structure-activity studies, quantitative microassays, analysis of drug purity and protein conformation, and immobilized affinity ligands. Despite the virtues of these approaches with respect to applicability, resolving power, speed, and low sample consumption, problems remain with respect to analyte identification and low concentration limits of detection. The ongoing development of new detector technologies for capillary electrophoresis such as mass spectrometry, and possibly nuclear magnetic resonance and other spectroscopic methods, is therefore very promising for the continued increased use of affinity capillary electrophoresis.     

Recent progress in chiral separation principles in capillary electrophoresis

This review summarizes recent developments in the field of chiral separations by electromigration techniques including capillary zone electrophoresis (CZE), capillary gel electrophoresis (CGE), isotachophoresis (ITP), electrokinetic chromatography (EKC), and capillary electrochromatography (CEC). This overview focuses on the development of new chiral selectors and the introduction of new techniques rather than applications of already established selectors and methods. The mechanisms of the different chiral separation principles are discussed.     

Comparative analysis of storage proteins of Lotus spp. seeds by CGE and SDS-PAGE

L. tenuis and L. corniculatus seeds are morphologically very similar but their purchase prices are quite different. Chromosome number counting is the only test used thus far in laboratories for the identification of these seeds. Recently, the flavonol's pattern has been used as a criterion for differentiation. In the present work, we studied the storage protein patterns of different Lotus seed samples by capillary gel electrophoresis (CGE), as an alternative method, comparing it with sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). The seeds were treated according to International Seed Testing Association (ISTA) recommendations. CGE separations were performed using an uncoated capillary of 18 cm effective length and 50 microns i.d. and the Bio-Rad Protein Kit (Hercules, CA, U.S.A.). On-line detection was carried out at 220 nm.     

Stronger together: Analytical techniques for recombinant adeno associated virus

With recent FDA approval of two recombinant adeno-associated virus (rAAV)-based gene therapies, these vectors have proven that they are suitable to address monogenic diseases. However, rAAVs are relatively new modalities, and their production and therapy costs significantly exceed those of conventional biologics. Thus, significant efforts are made to improve the processes, methods, and techniques used in manufacturing and quality control (QC). Here, we evaluate transmission electron microscopy (TEM), analytical ultracentrifugation (AUC), and two modes of capillary electrophoresis (CE) for their ability to analyze the DNA encapsidated by rAAVs. While TEM and AUC are well-established methods for rAAV, capillary gel electrophoresis (CGE) has been just recently proposed for viral genome sizing. The data presented reflect that samples are very complex, with various DNA species incorporated in the virus, including small fragments as well as DNA that is larger than the targeted transgene. CGE provides a good insight in the filling of rAAVs, but the workflow is tedious and the method is not applicable for the determination of DNA titer, since a procedure for the absolute quantification (e.g., calibration) is not yet established. For estimating the genome titer, we propose a simplified capillary zone electrophoresis approach with minimal sample preparation and short separation times (<5 min/run). Our data show the benefits of using the four techniques combined, since each of them alone is prone to delivering ambiguous results. For this reason, a clear view of the rAAV interior can only be provided by using several analytical methods simultaneously.     

Recent developments in DNA sequencing by capillary and microdevice electrophoresis

The present review covers papers published in the years 1997 and 1998 on DNA sequencing by capillary and microdevice electrophoresis. The article does not include other electrophoretic DNA applications such as analysis of oligonucleotides, genotyping, and mutational analysis. Capillary gel electrophoresis (CGE) is starting to become a viable competitor to slab gel electrophoresis for DNA sequencing. Commercially available multicapillary array sequencers are now entering sequencing facilities which to date have totally relied on traditional slab gel technology. CGE research on DNA sequencing therefore becomes increasingly concerned with the critical task of fine-tuning the operational parameters to create robust sequencing systems. Electrophoretic microdevices are being considered the next technological step in DNA sequencing by electrophoresis.     

Recent advances in capillary electrophoresis/electrospray-mass spectrometry

In this review, the progress in hyphenation of capillary electrophoresis (CE) with electrospray ionization-mass spectrometry (ESI-MS) since the article of Banks (Banks, J. F., Electrophoresis 1997, 18, 2255-2266) is reported. In all capillary-based electromigration techniques, such as capillary gel electrophoresis (CGE), capillary isotachophoresis (CITP), capillary isoelectric focussing (CIEF), micellar electrokinetic chromatography (MEKC), affinity capillary electrophoresis (ACE), as well as in the hybrid techniques capillary electrochromatography (CEC), and pressurized capillary electrochromatography (pCEC) progress has been made in experimental setups, and for many groups of analytes, such as peptides, proteins, nucleotides, saccharides, drugs and their metabolites, CE/ESI-MS has been successfully applied. Electromigration is further miniaturized. New preconcentration methods allow the investigation of compounds, which are not sensitively detected with ESI-MS. Coordination ion spray (CIS) MS is another method for sensitivity enhancement by on-line formation of charged coordination compounds.     

Capillary electrophoresis of DNA damage after irradiation: apoptosis and necrosis

Apoptosis is a type of cellular death but also directly regulates tumorigenesis through different gene expression. This phenomenon is often used as end-point in studies of radio- and chemosensitivity of cancer cells. Restriction DNA fragments have been separated quickly, efficiently and successfully by capillary gel electrophoresis (CGE). In this study CGE has been applied to distinguish between the discrete pattern of degraded DNA produced by apoptosis and randomized DNA breaks produced by ionizing radiation. The influence of different variables has been discussed and an example of fast separation by CGE of the apoptotic fragments produced by UV light treatment is shown.     

Gel and polymer-solution mediated separation of biopolymers by capillary electrophoresis

In the age of genomics and proteomics, high-resolution separation techniques are routinely utilized in an integrated and automated fashion to solve formidable separation problems and provide the means for large-scale analysis of biological samples with excellent resolution. By automating the current manual procedures, capillary gel (CGE) and polymer-solution mediated electrophoresis greatly enhance the productivity of biopolymer analysis while also reducing both analysis time and the human intervention necessary from sample loading to data processing. The advent of this novel and high-performance bioseparation technique has made it possible to sequence the human genome and revealed global changes in the genome and proteome level, bringing about a revolutionary transition in our views of living systems on the molecular basis. CGE and polymer-solution mediated electrophoresis and related microseparation methods (e.g., electrophoresis microchips) are quickly becoming important separation and characterization tools in analytical biochemistry and molecular biology. This review gives an overview of the key application areas of DNA, protein, and complex carbohydrate analysis, and summarizes the latest developments on CGE column technology, including capillary coatings and sieving polymer matrices. Micropreparative aspects and related microseparation techniques are also discussed.     

Analysis of DNA restriction fragments and polymerase chain reaction products by capillary electrophoresis

Capillary electrophoresis (CE) is a new, high-resolution tool for the analysis of DNA restriction fragments and DNA amplified by the polymerase chain reaction (PCR). By combining many of the principles of traditional slab gel methods in a capillary format, it is possible to perform molecular size determinations of human and plant PCR amplification products and DNA restriction fragments. DNA restriction fragments and PCR products were analyzed by dynamic sieving electrophoresis (DSE) and capillary gel electrophoresis (CGE). As part of this study, sample preparation procedures, injection modes, and the use of molecular mass markers were evaluated. Optimum separations were performed using the uPage-3 (3% T, 3% C) CGE columns with UV detection at 260 nm. Membrane dialysis and ultrafiltration/centrifugation proved to be nearly equivalent methods of sample preparation. Reproducibility studies demonstrated that blunt-ended, non-phosphorylated markers (specifically allele generated markers) provide the most accurate calibration for PCR product analysis. This study demonstrates that CE offers a high-speed, high-resolution analytical method for accurately determining molecular size and/or allelic type as compared with traditional methodologies.     

Protein separation by capillary gel electrophoresis: A review

Capillary gel electrophoresis (CGE) has been used for protein separation for more than two decades. Due to the technology advancement, current CGE methods are becoming more and more robust and reliable for protein analysis, and some of the methods have been routinely used for the analysis of protein-based pharmaceuticals and quality controls. In light of this progress, we survey 147 papers related to CGE separations of proteins and present an overview of this technology. We first introduce briefly the early development of CGE. We then review the methodology, in which we specifically describe the matrices, coatings, and detection strategies used in CGE. CGE using microfabricated channels and incorporation of CGE with two-dimensional protein separations are also discussed in this section. We finally present a few representative applications of CGE for separating proteins in real-world samples.     

Recent advances in capillary separations for proteomics

The sequencing of several organisms' genomes, including the human's one, has opened the way for the so-called postgenomic era, which is now routinely coined as "proteomics". The most basic task in proteomics remains the detection and identification of proteins from a biological sample, and the most traditional way to achieve this goal consists of protein separations performed by two-dimensional polyacrylamide gel electrophoresis (2-D PAGE). Still, the 2-D PAGE-mass spectrometry (MS) approach remains lacking in proteome coverage (for proteins having extreme isoelectric points or molecular masses as well as for membrane proteins), dynamic range, sensitivity, and throughput. Consequently, considerable efforts have been devoted to the development of non-gel-based proteome separation technologies in an effort to alleviate the shortcomings in 2-D PAGE while reserving the ability to resolve complex protein and peptide mixtures prior to MS analysis. This review focuses on the most recent advances in capillary-based separation techniques, including capillary liquid chromatography, capillary electrophoresis, and capillary electrokinetic chromatography, and combinations of multiples of these mechanisms, along with the coupling of these techniques to MS. Developments in capillary separations capable of providing extremely high resolving power and selective analyte enrichment are particularly highlighted for their roles within the broader context of a state-of-the-art integrated proteome effort. Miniaturized and integrated multidimensional peptide/protein separations using microfluidics are further summarized for their potential applications in high-throughput protein profiling toward biomarker discovery and clinical diagnosis.     

Development of a capillary gel electrophoresis method for monitoring disulfide isomer heterogeneity in IgG2 antibodies

A CGE method for monitoring the disulfide isomer distribution characteristic of IgG2 MAbs is presented. Disulfide heterogeneity of MAbs has been studied using various chromatographic and electrophoretic methods. Although CGE operates using a different selectivity mechanism from that of sorption chromatographic techniques, similar trends are present in the data, which allow the CGE method to be used as a complementary method for studying disulfide isomer distribution. This article focuses on the optimization of a capillary‐based gel electrophoresis method that can be used to support antibody development including bioprocess optimization, antibody characterization, release, and formulation stability assessment.     

Methodological Challenges of Protein Analysis in Blood Serum and Cerebrospinal Fluid by Capillary Electrophoresis

Summary High-performance capillary electrophoresis (HPCE or CE) is an ultrasensitive analytical technique with high resolving power and a wide area of applications including peptide/protein analysis. Its applicability is greatly enhanced by the short separation times, the ease of method development and the minimum sample and organic solvent requirements. Various HPCE modes have been developed for peptide/protein analysis, including capillary zone electrophoresis, micellar elektrokinetic capillary chromatography, capillary isoelectric focusing, isotachophoresis, capillary gel electrophoresis and microemulsion elektrokinetic chromatography. HPCE can easily be applied to quality control of manufacturing processes or to clinical routine for diagnostic purposes due to its potential to provide information on the identity, the purity of the samples and the quantities of the constituents. Furthermore, interactions of a peptide or a protein with other molecules can be studied by HPCE. The separation principles of the various operation modes applied to peptide/protein analysis are presented in this article. Furthermore, in order to exemplify the application of the separation principles in the area of serum protein analysis, which is of importance in clinical practice, the capillary electrophoretic methods developed for analysis of serum and cerebrospinal fluid proteins are also reviewed.Presented at: International Symposium on Separation and Characterization of Natural and Synthetic Macromolecules, Amsterdam, The Netherlands, February 5–7, 2003     

Quantitative capillary gel electrophoresis assay of phosphorothioate oligonucleotides in pharmaceutical formulations

Quantitative capillary gel electrophoresis (QCGE) has been developed for the accurate quantitation of a 21-mer phosphorothioate oligonucleotide, ISIS 2922, and its degradation products in an intravitreal formulation. The electrokinetic mode of injection employed by CGE necessitates formulation of the external reference standard in a sample matrix similar to that of the drug product and the use of an internal standard for improved accuracy and precision. The analytical method detailed in this paper has demonstrated the necessary accuracy, precision, linearity, range, selectivity and ruggedness for use in routine drug product analysis and stability monitoring of phosphorothioate oligonucleotides.     

Microchip capillary gel electrophoresis with electrochemical detection for the analysis of known SNPs

A novel microchip-based single nucleotide polymorphism (SNP) screening system has been developed. The system utilizes capillary gel electrophoresis (CGE) with electrochemical detection in a chip-based format to accomplish rapid scoring of a mock SNP site. The accuracy of the thermostable polymerase and the advantages of coupling this technique to microfluidics are demonstrated. An electrochemically labeled chain terminator is used in the single base extension (SBE) reaction, in which the terminator is incorporated only when its Watson-Crick complementary base is present at the mock SNP site. The resulting electrochemically active extension product is subsequently separated from any excess terminator by CGE and detected by sinusoidal voltammetry. Although no attempts at optimization have been made, the analysis is performed in less than 4 min. The technique presented could lead to a fast, simple, and cost effective SNP scoring system.     

Determination of Genetically Modified Soybean by Multiplex PCR and CGE with LIF Detection

A method for rapid screening, identification and detection of genetically modified soybean by multiplex polymerase chain reaction (PCR) and capillary gel electrophoresis with laser-induced fluorescence (CGE–LIF) was developed and applied to actual food samples. A triplex PCR procedure was used to amplify the parts of nopaline synthase (NOS) terminator, and the junction between cauliflower mosaic virus 35S promoter and chloroplast transit peptide CTP4 trait gene, as well as the lectin gene to allow the screening and identification of specific transgenic soybean line (glyphosate-tolerant soybean). The multiplex PCR parameters and conditions of capillary gel electrophoresis were optimized. The amplified DNA fragments were analyzed by CGE–LIF. The amplified PCR products were analyzed by CGE–LIF within about 20 min. The method developed is highly sensitive and allows the detection of a percentage of genetically modified soybean as low as 0.025%. The percentage is low enough to fulfill the requirement of the EU Regulation for transgenic food labeling of 1.0%. The sequences of the multiple PCR products were identical with those published in Genbank. The proposed method has been used in identification and detection of genetically modified soybean in various food samples. Compared with agarose gel electrophoresis (AGE), the proposed method is more rapid, accurate and requires a smaller amount of samples. Thus an efficient alternative method is provided for monitoring genetically modified soybean in order to meet the increasing demand of implementation of the genetically modified food labeling policy.     

State-of-the-art of capillary electrophoresis with application to the area of glycoconjugates

Glycoconjugates constitute a major group of biomolecules, which participate in several biological functions and processes. Their carbohydrate components play key roles in determining the properties of glycoconjugates and, therefore, analysis and structural characterization of carbohydrates are essential. Capillary electrophoresis, due to its high resolving power and sensitivity, has been successfully used for the analysis of carbohydrates. In this review the principles of high-performance capillary electrophoresis; mechanisms employed for glycoconjugate analysis as well as the various detection techniques used are summarized.