Copper-free Sonogashira cross-coupling reaction catalyzed by polymer-supported N-heterocyclic carbene palladium complex

A core-shell type of polymer-supported N-heterocyclic carbene (NHC) palladium catalyst was applied to Sonogashira cross-coupling reactions without copper cocatalyst under ambient atmosphere. This supported NHC-palladium complex efficiently catalyzed the copper-free Sonogashira reaction of various aryl iodides and bromides with terminal alkynes; the reaction exhibited high dependency on the temperature and the amount of base as well as its nature. In addition, this heterogeneous catalyst exhibited good reusability for the copper-free Sonogashira reaction.     

Enhanced catalyst recovery in an aqueous copper-free Sonogashira cross-coupling reaction

We report the synthesis of a superparamagnetic nanoparticle MNP (γ-Fe(2)O(3)/polymer) supported dendritic catalyst based on a bulky electron-rich phosphine Pd(II) complex. The high reactivity of this catalyst is described in a copper-free Sonogashira C-C cross-coupling reaction in water, and the significant role of surfactant additives is highlighted in the recovery study.     

离子液体中无膦、无铜、钯催化的Sonogashira交联反应的研究

研究了离子液体中无膦、无铜、钯催化剂在Sonogashira交联反应中的催化性能. 系统考察了反应温度、溶剂、钯源、碱等因素的影响及底物的适用性. 研究结果表明, 该催化体系对各种电子效应的碘代烷和末端炔烃的Sonogashira交联反应是十分有效的, 反应在温和的条件下取得较好的收率. 此外, 该催化体系有很好的重复使用性, 循环四次后催化活性只有略微的降低.     

Copper-free palladium-catalyzed Sonogashira and Hiyama cross-couplings using aryl imidazol-1-ylsulfonates

Aryl imidazylates are effective electrophilic partners in copper-free palladium-catalyzed Hiyama and Sonogashira cross-coupling reactions. The Sonogashira cross-coupling of estron-3-yl imidazylate afforded the corresponding phenylacetylene derivative in excellent yield.     

Chemical Labeling of 5-Iodo-2′-deoxyuridine with 4-Ethynyl-N-ethyl-1,8-naphthalimide Using Copper-Free Sonogashira Cross-Coupling in Aqueous Medium

The utility of Sonogashira cross-coupling reactions in organic synthesis is indisputable. However, the palladium catalytic Sonogashira reaction in mild condition is still in its infancy. Here, we reported the synthesis of a fluorescent nucleoside analog by using a copper-free Sonogashira cross-coupling reaction in a satisfactory yield. This reaction occurred at 37 °C in the open air and aqueous medium, and avoided the toxicity of Cu(I). The mild Sonogashira reaction provided the possibility of fluorescent labeling of nucleoside mimics in living cells.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Heterogeneous copper-free Sonogashira coupling reaction catalyzed by a reusable palladium Schiff base complex in water

Heterogeneous Sonogashira coupling of terminal alkynes with aryl halides was studied over a polymer-supported macrocyclic Schiff base palladium complex. The cross-coupling reaction proceeded smoothly by adding a piperidine in water medium. The catalyst exhibited effective catalytic activities to afford the corresponding products in good to excellent yields under copper-free conditions. Furthermore, the catalyst could be easily recovered and reused for several times without a significant loss of its activity.     

The palladium-catalysed copper-free Sonogashira coupling of isoindoline nitroxides: a convenient route to robust profluorescent carbon-carbon frameworks

A series of novel acetylene-substituted isoindoline nitroxides were synthesised via palladium-catalysed copper-free Sonogashira coupling. These results demonstrate that the Sonogashira reaction is suitable for the generation of a wide range of aryl nitroxides of expanded structural variety. The novel aryl-iodide containing nitroxide, 5-iodo-1,1,3,3-tetramethylisoindolin-2-yloxyl, 3, was a key intermediate for this coupling, giving acetylene-substituted isoindoline nitroxides in high yield. Subsequent reaction of the deprotected ethynyl nitroxide 12 with iodinated polyaromatics furnished novel aromatic nitroxides with extended-conjugation. Such nitroxides have been described as profluorescent, as their quantum yields are significantly lower than those of the corresponding diamagnetic derivatives. The quantum yields of the naphthyl- and phenanthryl-acetylene isoindoline nitroxides (13 and 14) were found to be 200-fold and 65-fold less than the non-radical methoxyamine derivatives (23 and 24). Ethyne- and butadiyne-linked nitroxide dimers could also be synthesised by this cross coupling methodology.     

A Pauson-Khand approach to the hamigerans

An intramolecular Pauson-Khand reaction has been used in the construction of the tricyclic core common to the hamigeran terpenes. For effective cyclization, it was necessary to tether the olefin-containing moiety to the aromatic framework to reduce its conformation mobility; this was accomplished using a silylene protecting group. Efficient construction of the aryl enyne from a salicylic acid derivative was accomplished via ortho lithiation and Sonogashira cross-coupling chemistry.     

Oxazolinethiones and oxazolidinethiones for the first copper-catalyzed desulfurative cross-coupling reaction and first sonogashira applications

Cyclic thionocarbamates, namely chiral oxazolidinethiones (OZT) and aromatic oxazolinethiones (OXT), were involved, for the first time, in Sonogashira cross-coupling. A cooperative effect of two different copper (I) species-CuI and CuTC-accounts for this new copper-catalyzed desulfurative carbon-carbon cross-coupling reaction. This cooperative reactivity could also be extended to other copper (I) catalysts.     

The first Cu- and amine-free Sonogashira-type cross-coupling in the C-6-alkynylation of protected 2′-deoxyadenosine

The Sonogashira cross-coupling reaction offers a convenient route to C(sp)-C(sp²) bond formation. Although the Sonogashira reaction has traditionally been carried out in the presence of Pd catalyst and a co-catalyst of Cu(I) salt, the use of Cu(I) salt is often not efficient because it leads to the formation of unwanted side-products. This has prompted interest in recent years in the development of Cu-free Sonogashira cross-coupling reaction conditions. In addition, the development of Cu-free Sonogashira cross-coupling conditions for the alkynylation of nucleoside derivatives remains largely unexplored. Herein, we demonstrate that Cu- and amine-free Sonogashira-type cross-coupling lead to successful alkynylation of aryl bromides and heteroaryl bromides. For the first time, we have extended this method for the alkynylation of protected 2′-deoxyadenosine at the C-6 position.     

Sonogashira cross-coupling reactions catalysed by heterogeneous copper-free Pd-zeolites

A heterogeneous [Pd(NH₃)₄]-NaY catalyst was applied to the copper-free Sonogashira cross-coupling of aryl halides with terminal alkynes. This copper-free heterogeneous Pd-catalyst is efficient, stable and recyclable. Aryl iodides and activated aryl bromides were converted quantitatively using 1 mol % Pd-catalyst to the corresponding diaryl-substituted alkynes within 3 h.     

Preparation of amphiphilic glycerol-substituted zinc phthalocyanines using copper-free Sonogashira cross-coupling in aqueous medium

Palladium-catalyzed copper-free Sonogashira cross-coupling reactions were performed on a protected and unprotected monoiodotriglycerol substituted Zn(II) phthalocyanine with various alkynes in organic and aqueous medium. From the silyl protected alkyne derivative, a protected homo coupled dimeric product was also prepared using Glaser coupling. All products were purified by reverse phase HPLC and the assigned structures were confirmed by mass and UV-vis spectroscopy.     

Efficient palladium-catalyzed homocoupling reaction and Sonogashira cross-coupling reaction of terminal alkynes under aerobic conditions

An efficient method for palladium-catalyzed homocoupling reaction of terminal alkynes in the synthesis of symmetric diynes is presented. The results showed that both Pd(OAc)(2) and CuI played crucial roles in the reaction. In the presence of 2 mol % Pd(OAc)(2), 2 mol % CuI, 3 equiv of Dabco, and air, homocoupling of various terminal alkynes afforded the corresponding symmetrical diynes in moderate to excellent yields, whereas low yields were obtained without either Pd(OAc)(2) or CuI. Moreover, high TONs (turnover numbers; up to 940 000 for the reaction of phenylacetylene) for the homocoupling reaction were observed. Under similar reaction conditions, cross-coupling of 1-iodo-4-nitrobenzene with phenylacetylene was also carried out smoothly in quantitative yield. However, the presence of CuI disfavored the palladium-catalyzed Sonogashira cross-coupling reactions of the less active aryl iodides and bromides. In the presence of 0.01-2 mol % Pd(OAc)(2), a number of aryl iodides and bromides were coupled with terminal alkynes in good to excellent yields. It is noteworthy that this protocol employs mild, efficient, aerobic, copper-free, and ligand-free conditions.     

Sonogashira reaction on pyridinium N-heteroarylaminides

The reactivity of N-(5-iodopyridin-2-yl)aminide in a copper-free Sonogashira cross-coupling process is reported. The reaction proceeds on using PdCl₂(PPh₃)₂ and DABCO as the base under microwave irradiation in acetonitrile or water as solvents. The process can also be carried out by traditional heating in acetonitrile on using Pd(AcO)₂/DABCO with Cs₂CO₃.     

Efficient access to materials-oriented aromatic alkynes via the mechanochemical Sonogashira coupling of solid aryl halides with large polycyclic conjugated systems

Sonogashira coupling represents an indispensable tool for the preparation of organic materials that contain C(sp)–C(sp²) bonds. Improving the efficiency and generality of this methodology has long been an important research subject in materials science. Here, we show that a high-temperature ball-milling technique enables the highly efficient palladium-catalyzed Sonogashira coupling of solid aryl halides that bear large polyaromatic structures including sparingly soluble substrates and unactivated aryl chlorides. In fact, this new protocol provides various materials-oriented polyaromatic alkynes in excellent yield within short reaction times in the absence of bulk reaction solvents. Notably, we synthesized a new luminescent material via the mechanochemical Sonogashira coupling of poorly soluble Vat Red 1 in a much higher yield compared to those obtained using solution-based conditions. The utility of this method was further demonstrated by the rapid synthesis of a fluorescent metal–organic framework (MOF) precursor via two sequential mechanochemical Sonogashira cross-coupling reactions. The present study illustrates the great potential of Sonogashira coupling using ball milling for the preparation of materials-oriented alkynes and for the discovery of novel functional materials.

Using a high-temperature ball-milling technique, a practical mechanochemical protocol for the Sonogashira cross-coupling of polyaromatic halides was achieved, which provides efficient access to materials-oriented aromatic alkynes.     

Catalytic activity of palladium(II) diaminocarbene complexes in the Sonogashira and Suzuki reactions

Palladium(II) complexes with chelating and non-chelating diaminocarbene ligands were assessed as catalysts in the cross-coupling reactions of haloarenes with oct-1-yne (Sonogashira reaction) and phenylboronic acid (Suzuki reaction). Both complexes exhibited a higher catalytic activity than traditional phosphine ligandbased systems in the Sonogashira reaction, and they ensured cross-coupling not only with iodoarenes but also with bromoarenes activated by electron-withdrawing substituents. The catalytic activities of the examined complexes in the Suzuki reaction were appreciably different: the palladium(II) complex with the chelating ligand turned out to be considerably less active than the complex with the non-chelating ligand.     

Pd2+ and Cu2+ catalyzed oxidative cross-coupling of mercaptoacetylenes and arylboronic acids

An oxidative thiolate scavenging concept in a metal catalyzed reaction is presented and demonstrated on the aerobic Pd and Cu catalyzed cross-coupling of mercaptoacetylenes with arylboronic acids. Synthetic value of the chemistry as the complementary tool to the Sonogashira protocol has been demonstrated on a series of functionalized mercaptoacetylene substrates.     

Cyclopalladated ferrocenylimines: efficient catalysts for homocoupling and Sonogashira reaction of terminal alkynes

A novel pathway for homocoupling of terminal alkynes has been described using cyclopalladated ferrocenylimine 1 or 2/CuI as catalyst in the air. This catalytic system could tolerate several functional groups. The palladacycle 2 in the presence of n-Bu₄NBr as an additive could be applied to Sonogashira cross-coupling reaction of aryl iodides, aryl bromides, and some activated aryl chlorides with terminal alkynes under amine- and copper-free conditions, mostly to give moderate to excellent yields.     

A diphenylphosphinoethane-functionalized polystyrene resin-supported Pd(0) complex as an effective catalyst for copper-free Sonogashira coupling reactions under aerobic conditions

A polymer-supported palladium(0) diphenylphosphinoethane complex was found to be a highly active catalyst for the copper-free Sonogashira coupling reaction of aryl iodides with terminal alkynes, giving excellent yields of products (85-98%) under aerobic conditions.     

9-fluorenylphosphines for the Pd-catalyzed sonogashira, suzuki, and Buchwald-Hartwig coupling reactions in organic solvents and water

The lithiation/alkylation of fluorene leads to various 9-alkyl-fluorenes (alkyl=Me, Et, iPr, -Pr, -C18H25) in>95% yields, for which lithiation and reaction with R2PCl (R=Cy, iPr, tBu) generates 9-alkyl, 9-PR2-fluorenes which constitute electron-rich and bulky phosphine ligands. The in-situ-formed palladium-phosphine complexes ([Na2PdCl4], phosphonium salt, base, substrates) were tested in the Sonogashira, Suzuki, and Buchwald-Hartwig reactions of aryl chlorides and aryl bromides in organic solvents. The Sonogashira coupling of aryl chlorides at 100-120 degrees C leads to>90% yields with 1 mol% of Pd catalyst. The Suzuki coupling of aryl chlorides typically requires 0.05 mol% of Pd catalyst at 100 degrees C in dioxane for quantitative product formation. To carry out "green" cross-coupling reactions in water, 9-ethylfluorenyldicyclohexylphosphine was reacted in sulphuric acid to generate the respective 2-sulfonated phosphonium salt. The Suzuki coupling of activated aryl chlorides by using this water-soluble catalyst requires only 0.01 mol% of Pd catalyst, while a wide range of aryl chlorides can be quantitatively converted into the respective coupling products by using 0.1-0.5 mol% of catalyst in pure water at 100 degrees C. Difficult substrate combinations, such as naphthylboronic acid or 3-pyridylboronic acid and aryl chlorides are coupled at 100 degrees C by using 0.1-0.5 mol% of catalyst in pure water to obtain the respective N-heterocycles in quantitative yields. The copper-free aqueous Sonogashira coupling of aryl bromides generates the respective tolane derivatives in>95% yield.