Iron silylamide-grafted periodic mesoporous silica

The surface chemistry of a series of well-defined metalorganic ferrous and ferric iron complexes on periodic mesoporous silica (PMS) was investigated. In addition to literature known Fe(II)[N(SiMe(3))(2)](2)(THF), Fe(II)[N(SiPh(2)Me(2))(2)](2), and Fe(III)[N(SiMe(3))(2)](2)Cl(THF), the new complexes [Fe(II){N(SiHMe(2))(2)}(2)](2) and Fe(III)[N(SiHMe(2))(2)](3)(μ-Cl)Li(THF)(3) were employed as grafting precursors. Selection criteria for the molecular precursors were the molecular size (monoiron versus diiron species), the oxidation state of the iron center (II versus III), and the functionality of the silylamido ligand (e.g., built-in spectroscopic probes). Hexagonal channel-like MCM-41 and cubic cage-like SBA-1 were chosen as two distinct PMS materials. The highest iron load (12.8 wt %) was obtained for hybrid material [Fe(II){N(SiHMe(2))(2)}(2)](2)@MCM-41 upon stirring the reaction mixture iron silylamide/PMS/n-hexane for 18 h at ambient temperature. Size-selective grafting and concomitantly extensive surface silylation were found to be prominent for cage-like SBA-1. Here, the surface metalation is governed by the type of iron precursor, the pore size, the reaction time, and the solvent. The formation of surface-attached iron-ligand species is discussed on the basis of diffuse reflectance infrared Fourier transform (DRIFT) and electron paramagnetic resonance (EPR) spectroscopy, nitrogen physisorption, and elemental analysis.     

Synthesis and characterization of new biphenolate and binaphtholate rare-Earth-metal amido complexes: catalysts for asymmetric olefin hydroamination/cyclization

Monomeric diolate amido yttrium complexes [Y[diolate][N(SiHMe(2))(2)](thf)(2)] can be prepared in good yield by treating [Y[N(SiHMe(2))(2)](3)(thf)(2)] with either 3,3'-di-tert-butyl-5,5',6,6'-tetramethyl-1,1'-biphenyl-2,2'-diol (H(2)(Biphen)), 3,3'-bis(2,4,6-triisopropylphenyl)-2,2'-dihydroxy-1,1'-dinaphthyl (H(2)(Trip(2)BINO)) or 3,3'-bis(2,6-diisopropylphenyl)-2,2'-dihydroxy-1,1'-dinaphthyl (H(2)(Dip(2)BINO)) in racemic and enantiopure form. The racemic complex [Y(biphen)[N(SiHMe(2))(2)](thf)(2)] dimerizes upon heating to give the heterochiral complex (R,S)-[Y(biphen)[N(SiHMe(2))(2)](thf)](2). The corresponding dimeric heterochiral lanthanum complex was the sole product in the reaction of H(2)(Biphen) with [La[N(SiHMe(2))(2)](3)(thf)(2)]. Single-crystal X-ray diffraction of both dimeric complexes revealed that the two Ln(biphen)[N(SiHMe(2))(2)](thf) fragments are connected through bridging phenolate groups of the biphenolate ligands. The two different phenolate groups undergo an intramolecular exchange process in solution leading to their equivalence on the NMR timescale. All complexes were active catalysts for the hydroamination/cyclization of aminoalkynes and aminoalkenes at elevated temperature, with [Y((R)-dip(2)bino)[N(SiHMe(2))(2)](thf)(2)] being the most active one giving enantioselectivities of up to 57 % ee. Kinetic resolution of 2-aminohex-5-ene proceeded with this catalyst with 6.4:1 trans selectivity to give 2,5-dimethylpyrrolidine with a k(rel) of 2.6.     

Postfunctionalization of periodic mesoporous silica SBA-1 with magnesium(II) and iron(II) silylamides

Magnesium silylamide complexes Mg[N(SiHMe(2))(2)](2)(THF)(2) and Mg[N(SiPhMe(2))(2)](2) were synthesized according to transsilylamination and alkane elimination protocols, respectively, utilizing Mg[N(SiMe(3))(2)](2)(THF)(2) and [Mg(n-Bu)](2) as precursors. Cage-like periodic mesoporous silica SBA-1 was treated with donor solvent-free dimeric [Mg{N(SiHMe(2))(2)}(2)](2), [Mg{N(SiMe(3))(2)}(2)](2) and monomeric Mg[N(SiPhMe(2))(2)](2), producing hybrid materials [Mg(NR(2))(2)]@SBA-1 with magnesium located mainly at the external surface. Consecutive grafting of [Mg{N(SiHMe(2))(2)}(2)](2) and [Fe(II){N(SiHMe(2))(2)}(2)](2) onto SBA-1 led to heterobimetallic hybrid materials which exhibit complete consumption of the isolated surface silanol groups, evidencing intra-cage surface functionalization. All materials were characterized by DRIFT spectroscopy, nitrogen physisorption and elemental analysis.     

Scandium alkyl and amide complexes containing a cyclen-derived (NNNN) macrocyclic ligand: synthesis, structure and ring-opening polymerization activity toward lactide monomers

Cyclic polyamine 1,4,7-trimethyl-1,4,7,10-tetraazacyclododecane, (Me(3)TACD)H (= Me(3)[12]aneN(4)), reacted with [K{N(SiHMe(2))(2)}] in benzene-d(6) to give [K{(Me(3)TACD)SiMe(2)N(SiHMe(2))}] (1) under hydrogen evolution. Single-crystal X-ray diffraction of 1 shows a dinuclear structure in the solid state, featuring a bridging μ-amido and a weak β-agostic Si-H bond. 1,7-Dimethyl-1,4,7,10-tetraazacyclododecane (Me(2)TACD)H(2) (= Me(2)[12]aneN(4)) and (Me(3)TACD)H were reacted with [Sc{N(SiHMe(2))(2)}(3)(thf)] in benzene-d(6) to give [{(Me(2)TACD)SiMe(2)N(SiHMe(2))}Sc{N(SiHMe(2))(2)}] (2) and [(Me(3)TACD)Sc{N(SiHMe(2))(2)}(2)SiMe(2)] (3), respectively. Both compounds are monomeric in solution and X-ray diffraction studies showed the scandium metal centers to be six-coordinate. The scandium alkyl complex [Sc(Me(3)TACD)(CH(2)SiMe(3))(2)] (4) was obtained by reacting (Me(3)TACD)H with [Sc(CH(2)SiMe(3))(3)(thf)] in benzene-d(6). The scandium amide complexes 2 and 3 catalyzed the ring-opening polymerization (ROP) of meso-lactide to give syndiotactic polylactides.     

Cube-type nitrido complexes containing titanium and alkali/alkaline-earth metals

Treatment of [[Ti(eta(5)-C(5)Me(5))(mu-NH)](3)(mu(3)-N)] with alkali-metal bis(trimethylsilyl)amido derivatives [M[N(SiMe(3))(2)]] in toluene affords edge-linked double-cube nitrido complexes [M(mu(4)-N)(mu(3)-NH)(2)[Ti(3)(eta(5)-C(5)Me(5))(3)(mu(3)-N)]](2) (M = Li, Na, K, Rb, Cs) or corner-shared double-cube nitrido complexes [M(mu(3)-N)(mu(3)-NH)(5)[Ti(3)(eta(5)-C(5)Me(5))(3)(mu(3)-N)](2)] (M = Na, K, Rb, Cs). Analogous reactions with 1/2 equiv of alkaline-earth bis(trimethylsilyl)amido derivatives [M[N(SiMe(3))(2)](2)(thf)(2)] give corner-shared double-cube nitrido complexes [M[(mu(3)-N)(mu(3)-NH)(2)Ti(3)(eta(5)-C(5)Me(5))(3)(mu(3)-N)](2)] (M = Mg, Ca, Sr, Ba). If 1 equiv of the group 2 amido reagent is employed, single-cube-type derivatives [(thf)(x)[(Me(3)Si)(2)N]M[(mu(3)-N)(mu(3)-NH)(2)Ti(3)(eta(5)-C(5)Me(5))(3)(mu(3)-N)]] (M = Mg, x = 0; M = Ca, Sr, Ba, x = 1) can be isolated or identified. The tetrahydrofuran molecules are easily displaced with 4-tert-butylpyridine in toluene, affording the analogous complexes [(tBupy)[(Me(3)Si)(2)N]M[(mu(3)-N)(mu(3)-NH)(2)Ti(3)(eta(5)-C(5)Me(5))(3)(mu(3)-N)]] (M = Ca, Sr). The X-ray crystal structures of [M(mu(3)-N)(mu(3)-NH)(5)[Ti(3)(eta(5)-C(5)Me(5))(3)(mu(3)-N)](2)] (M = K, Rb, Cs) and [M[(mu(3)-N)(mu(3)-NH)(2)Ti(3)(eta(5)-C(5)Me(5))(3)(mu(3))-N)](2)] (M = Ca, Sr) have been determined. The properties and solid-state structures of the azaheterometallocubane complexes bearing alkali and alkaline-earth metals are discussed.     

Homoleptic rare-earth metal(III) tetramethylaluminates: structural chemistry, reactivity, and performance in isoprene polymerization

The complexes [Ln(AlMe4)3] (Ln=Y, La, Ce, Pr, Nd, Sm, Ho, Lu) have been synthesized by an amide elimination route and the structures of [Lu{(micro-Me)2AlMe2}3], [Sm{(micro-Me)2AlMe2}3], [Pr{(micro-Me)2AlMe2}3], and [La{(micro-Me)2AlMe2}2{(micro-Me)3AlMe}] determined by X-ray crystallography. These structures reveal a distinct Ln3+ cation size-dependency. A comprehensive insight into the intrinsic properties and solution coordination phenomena of [Ln(AlMe4)3] complexes has been gained from extended dynamic 1H and 13C NMR spectroscopic studies, as well as 1D 89Y, 2D 1H/89Y, and 27Al NMR spectroscopic investigations. [Ce(AlMe4)3] and [Pr(AlMe4)3] have been used as alkyl precursors for the synthesis of heterobimetallic alkylated rare-earth metal complexes. Both carboxylate and siloxide ligands can be introduced by methane elimination reactions that give the heterobimetallic complexes [Ln{(O2CAriPr)2(micro-AlMe2)}2(AlMe4)(C6H14)n] and [Ln{OSi(OtBu)3}(AlMe3)(AlMe4)2], respectively. [Pr{OSi(OtBu)3}(AlMe3)(AlMe4)2] has been characterized by X-ray structure analysis. All of the cerium and praseodymium complexes are used as precatalysts in the stereospecific polymerization of isoprene (1-3 equivalents of Et2AlCl as co-catalyst) and compared to the corresponding neodymium-based initiators reported previously. The superior catalytic performance of the homoleptic complexes leads to quantitative yields of high-cis-1,4-polyisoprene (>98%) in almost all of the polymerization experiments. In the case of the binary catalyst mixtures derived from carboxylate or siloxide precatalysts quantitative formation of polyisoprene is only observed for nLn:nCl=1:2. The influence of the metal size is illustrated for the heterobimetallic lanthanum, cerium, praseodymium, neodymium, and gadolinium carboxylate complexes, and the highest activities are observed for praseodymium as a metal center in the presence of one equivalent of Et2AlCl.     

Formation of double cubanes [Sn(7)(NR)(8)] in the reactions of pyridyl and pyrimidinyl amines with Sn(NMe(2))(2): a synthetic and theoretical study

In contrast to the reactions of Sn(NMe(2))(2) with unfunctionalized primary amines (RNH(2)), which yield the simple imido Sn(II) cubanes [SnNR](4), the reactions of 2-pyridyl or 2-pyrimidinyl amines give the mixed-oxidation-state Sn(II)/Sn(IV) double cubanes [Sn(7)(NR)(8)]. In addition to [Sn(7)[2-N(5-Mepy)](8)] x 2thf (1 x 2thf) (py = pyridine) and [Sn(7)[2-N(pm)](8)] x 0.33thf (2 x 0.33thf) (pm = pyrimidine), which were communicated previously, the syntheses and structures of the new complexes [Sn(7)[2-N(4-Mepm)](8)] x 2thf (3 x 2thf), [Sn(7)[2-N(4,6-Me(2)pm)](8)] x 4thf (4 x 4thf), [Sn(7)[2-N(4-Me-6-MeO-pm)](8)] (5), and [Sn(7)[2-N(4-MeO-6-MeO-pm)](8)] (6) are reported. Model DFT calculations on the reactions of Sn(NMe(2))(2) with 2-pmNH(2) or PhNH(2), producing the cubanes [Sn[2-N(pm)]](4) and [SnNPh](4) (respectively), and the corresponding double cubanes [Sn(7)[2-N(pm)](8)] and [Sn(7)(NPh)(8)], show that the presence of intramolecular Sn...N bonding which spans the cubane halves of the complexes is crucial to the formation of the double-cubane structure.     

Heteroscorpionate rare-earth initiators for the controlled ring-opening polymerization of cyclic esters

A series of neutral rare-earth metal amides containing different achiral and chiral heteroscorpionate ligands was synthesized and characterized and these compounds were employed in the polymerization of cyclic esters. Thus, treatment of [Ln{N(SiHMe(2))(2)}(3)(thf)(2)] (Ln = Nd, Sm) with acetamide or thioacetamide heteroscorpionate ligands for 2 h at 0 °C afforded the α-agostic silylamido dimeric rare-earth compounds [Ln{N(SiHMe(2))(2)}(NNE)](2) (Ln = Nd and Sm; NNE = heteroscorpionate ligands, E = O, S) (1-8), some as enantiopure complexes. Complexes 1-8 contain dianionic heteroscorpionate pseudoallyl ligands resulting from C-H activation of the bridging methine group of the bis(pyrazol-1-yl)methane moiety and subsequent coordination to the metal center. However, when the reaction was carried out for 1 h at lower temperature new bis(silylamido) dimeric lanthanide compounds [Ln{N(SiHMe(2))(2)}(2)(NNE)](2) (Ln = Nd and Sm; E = O) (9 and 10) were obtained. The structures of the complexes were determined by spectroscopic methods and the X-ray crystal structures of 1, and 4 were also established. Neodymium complexes are active initiators for the ring-opening polymerization (ROP) of lactide (LA) and lactones, giving rise to medium-high molar mass polymers under mild conditions and with narrow polydispersities. These complexes were well suited for achieving well-controlled polymerization through an insertion-coordination mechanism. Achiral and racemic complexes did not affect stereocontrol in the polymerizarion of rac-LA but the enantiomerically pure complex 1 was found to exhibit a homosteric preference for one of the two enantiomers of rac-LA at low conversions.     

Silica-supported,single-site titanium catalysts for olefin epoxidation. A molecular precursor strategy for control of catalyst structure

A molecular precursor approach involving simple grafting procedures was used to produce site-isolated titanium-supported epoxidation catalysts of high activity and selectivity. The tris(tert-butoxy)siloxy titanium complexes Ti[OSi(O(t)Bu)(3)](4) (TiSi4), ((i)PrO)Ti[OSi(O(t)Bu)(3)](3) (TiSi3), and ((t)BuO)(3)TiOSi(O(t)Bu)(3) (TiSi) react with the hydroxyl groups of amorphous Aerosil, mesoporous MCM-41, and SBA-15 via loss of HO(t)Bu and/or HOSi(O(t)Bu)(3) and introduction of titanium species onto the silica surface. Powder X-ray diffraction, nitrogen adsorption/desorption, infrared, and diffuse reflectance ultraviolet spectroscopies were used to investigate the structures and chemical natures of the surface-bound titanium species. The titanium species exist mainly in isolated, tetrahedral coordination environments. Increasing the number of siloxide ligands in the molecular precursor decreases the amount of titanium that can be introduced this way, but also enhances the catalytic activity and selectivity for the epoxidation of cyclohexene with cumene hydroperoxide as oxidant. In addition, the high surface area mesoporous silicas (MCM-41 and SBA-15) are more effective than amorphous silica as supports for these catalysts. Supporting TiSi3 on the SBA-15 affords highly active cyclohexene epoxidation catalysts (0.25-1.77 wt % Ti loading) that provide turnover frequencies (TOFs) of 500-1500 h(-1) after 1 h (TOFs are reduced by about half after calcination). These results demonstrate that oxygen-rich siloxide complexes of titanium are useful as precursors to supported epoxidation catalysts.     

Donor-functionalized lanthanide terphenyl complexes: Synthesis and structural characterization of 2,6-di(o-anisol)phenyl compounds of ytterbium,yttrium, and samarium

The syntheses and molecular structures of a number of 2,6-di(o-anisol)phenyl ([double bond]Danip-) -based bis(amide) and bis(alkoxide) compounds of ytterbium, yttrium, and samarium are reported. Additionally, NMR spectroscopic data are reported for the analogous diamagnetic yttrium compounds. Salt metathesis reaction of equimolar amounts of DanipLi and YbCl(3) in tetrahydrofuran at room temperature followed by addition of 2 equiv of KN(SiMe(3))(2) or KN(SiHMe(2))(2) produces DanipYb[N(SiMe(3))(2)](2) (1) and DanipYb[N(SiHMe(2))(2)](2) (2), respectively. The analogous reaction using SmCl(3) and KN(SiHMe(2))(2) produces DanipSm[N(SiHMe(2))(2)](2) (3). Reaction of DanipLi and YbCl(3) in tetrahydrofuran at room temperature followed by addition of 2 equiv of KO(2,6-diisopropylphenyl) produces DanipYb[O(2,6-diisopropylphenyl)](2) (4). Our attempts to also prepare the yttrium analogue of complex 4 yielded single-crystalline material of the tetrahydrofuran adduct DanipY(THF)[O(2,6-diisopropylphenyl)](2) (5). The molecular structures of the complexes 1-4 feature five-coordinate metal atoms and coordination polyhedra which can be described as distorted square-pyramidal rather than trigonal-bipyramidal, with the ipso carbon atom occupying the apical position. On the other hand, the molecular structure of the tetrahydrofuran-solvated yttrium Danip arylalkoxide compound 5 features a six-coordinate metal atom in a distorted trigonal-prismatic coordination environment. In all cases the Danip ligand system adopts the chiral (racemic) d,l form.     

Addition of nitriles to alkaline earth metal complexes of 1,2-bis[(phenyl)imino]acenaphthenes

Compounds [Sr(dpp-bian)(thf)4] (2), [Ba(dpp-bian)(dme)2.5] (3) and [Mg(dtb-bian)(thf)2] (4) (dpp-bian = 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene; dtb-bian = 1,2-bis[(2,5-di-tert-butylphenyl)imino]acenaphthene) were prepared by reduction of dpp-bian and dtb-bian with an excess of metallic Mg, Sr, or Ba in THF or DME. Reactions of [Mg(dpp-bian)(thf)3], 3, and 4 with diphenylacetonitrile gave keteniminates [Mg(dpp-bianH)(NCCPh2)(thf)2] (5), [Mg(dtb-bianH)(NCCPh2)(thf)2] (6), and [Ba(dpp-bianH)(NCCPh2)(dme)2] (7), respectively. The reaction of 2 with CH3C[triple chemical bond]N in THF gave [{Sr(dpp-bianH)[N(H)C(CH3)C(H)CN](thf)}2] (8). The compounds 2, 3, 5-8 were characterized by elemental analysis, and IR and NMR spectroscopy. Molecular structures of 2, 3, 7, and 8 were determined by single-crystal X-ray diffraction. In contrast to reactions of alkali-metal reagents, magnesium amides, or yttriumalkyls with alpha-H acidic nitriles, which are accompanied by an amine or an alkane elimination, the reactions of [Mg(dpp-bian)(thf)3] (1), 2, 3, and 4 with such nitriles proceeded with formation of Mg, Sr, and Ba keteniminates and simultaneous protonation of one nitrogen atom of the bian ligand. The NMR spectroscopic data obtained for complex 5 indicated that in solution the amino hydrogen atom underwent the fast (on the NMR timescale) shuttle transfer between both nitrogen atoms of the dpp-bianH ligand.     

Synthesis, properties and structures of eight-coordinate zirconium(IV) and hafnium(IV) halide complexes with phosphorus and arsenic ligands

Eight-coordinate [MX(4)(L-L)(2)] (M = Zr or Hf; X = Cl or Br; L-L = o-C(6)H(4)(PMe(2))(2) or o-C(6)H(4)(AsMe(2))(2)) were made by displacement of Me(2)S from [MX(4)(Me(2)S)(2)] by three equivalents of L-L in CH(2)Cl(2) solution, or from MX(4) and L-L in anhydrous thf solution. The [MI(4)(L-L)(2)] were made directly from reaction of MI(4) with the ligand in CH(2)Cl(2) solution. The very moisture-sensitive complexes were characterised by IR, UV/Vis, and (1)H and (31)P NMR spectroscopy and microanalysis. Crystal structures of [ZrCl(4)[o-C(6)H(4)(AsMe(2))(2)](2)], [ZrBr(4)[-C(6)H(4)(PMe(2))(2)](2)], [ZrI(4)[o-C(6)H(4)(AsMe(2))(2)](2)] and [HfI(4)[o-C(6)H(4)(AsMe(2))(2)](2)] all show distorted dodecahedral structures. Surprisingly, unlike the corresponding Ti(iv) systems, only the eight-coordinate complex was found in each system. In contrast, the ligand o-C(6)H(4)(PPh(2))(2) forms only six-coordinate complexes [MX(4)[-C(6)H(4)(PPh(2))(2)]] which were fully characterised spectroscopically and analytically. Surprisingly the tripodal triarsine, MeC(CH(2)AsMe(2))(3), also produces eight-coordinate [MX(4)[MeC(CH(2)AsMe(2))(3)](2)] in which the triarsines bind as bidentates in a distorted dodecahedral structure. There is no evidence for seven-coordination as found in some thioether systems.     

High tetraalkylaluminate fluxionality in half-sandwich complexes of the trivalent rare-earth metals

Steric factors govern the formation of half-sandwich complexes (C5Me4R)Ln[N(SiHMe2)2]2 according to acid-base reactions utilising Ln[N(SiHMe2)2)3(thf)2 and substituted cyclopentadienes. Subsequent trimethylaluminium-promoted silylamide elimination produces the first half-sandwich bis(tetramethylaluminate) complexes (C5Me4R)Ln(AlMe4)2.     

Dinuclear cyano complexes of cobalt(III) and Iron(III) containing noninnocent 1,2,4,5-tetrakis(2-pyridinecarboxamido)benzene bridging ligands

Two new dinucleating ligands 1,2,4,5-tetrakis(2-pyridinecarboxamido)benzene, H(4)(tpb), and 1,2,4,5-tetrakis(4-tert-butyl-2-pyridinecarboxamido)benzene, H(4)(tbpb), have been synthesized, and the following dinuclear cyano complexes of cobalt(III) and iron(III) have been isolated: Na(2)[Co(III)(2)(tpb)(CN)(4)] (1); [N(n-Bu)(4)](2)[Co(III)(2)(tbpb)(CN)(4)] (2); [Co(III)(2)(tbpb(ox2))(CN)(4)] (3); [N(n-Bu)(4)](2)[Fe(III)(2)(tpb)(N(3))(4)] (4); [N(n-Bu)(4)](2)[Fe(III)(2)(tpb)(CN)(4)] (5); [N(n-Bu)(4)](2)[Fe(III)(2)(tbpb)(CN)(4)] (6). Complexes 2-4 and 6 have been structurally characterized by X-ray crystallography at 100 K. From electrochemical and spectroscopic (UV-vis, IR, EPR, M?ssbauer) and magnetochemical investigations it is established that the coordinated central 1,2,4,5-tetraamidobenzene entity in the cyano complexes can be oxidized in two successive one-electron steps yielding paramagnetic (tbpb(ox1))(3)(-) and diamagnetic (tbpb(ox2))(2)(-) anions. Thus, complex 6 exists in five characterized oxidation levels: [Fe(III)(2)(tbpb(ox2))(CN)(4)](0) (S = 0); [Fe(III)(2)(tbpb(ox1))(CN)(4)](-) (S = (1)/(2)); [Fe(III)(2)(tbpb)(CN)(4)](2)(-) (S = 0); [Fe(III)Fe(II)(tbpb)(CN)(4)](3)(-) (S = (1)/(2)); [Fe(II)(2)(tbpb)(CN)(4)](4)(-) (S = 0). The iron(II) and (III) ions are always low-spin configurated. The electronic structure of the paramagnetic iron(III) ions and the exchange interaction of the three-spin system [Fe(III)(2)(tbpb(ox1))(CN)(4)](-) are characterized in detail. Similarly, for 2 three oxidation levels have been identified and fully characterized: [Co(III)(2)(tbpb)(CN)(4)](2)(-) (S = 0); [Co(III)(2)(tbpb(ox1))(CN)(4)](-) (S = (1)/(2)); [Co(III)(2)(tbpb(ox2))(CN)(4)](0). The crystal structures of 2 and 3 clearly show that the two electron oxidation of 2 yielding 3 affects only the central tetraamidobenzene part of the ligand.     

Synthesis and structures of the first cationic perfluoroaryllanthanoid(II) complexes

Tetraphenylborate salts of solvated pentafluorophenyllanthanoid(II) cations [Ln(C(6)F(5))(thf)(n)](+) (Ln=Eu, n=6 (1); Ln=Yb, n=5 (2)) were readily synthesized in high yield by reactions of ytterbium or europium with HgPh(C(6)F(5)) and Me(3)NHBPh(4) in THF. The structures of 1.THF and 2 confirmed the existence of well-separated ions and both 1 and 2 show notable thermal stability at room temperature. The cation in 2 was also observed in the remarkable mixed-valent complex [Yb(II)(C(6)F(5))(thf)(5)][Yb(III)(C(6)F(5))(2)[N(SiMe(3))(2)](2)] (3), fortuitously isolated in low yield from a reaction of ytterbium metal, HgPh(C(6)F(5)), and HN(SiMe(3))(2) in THF, and which additionally has an unusual bis(pentafluorophenyl)bis[bis(trimethylsilyl)amido)]ytterbate(III) anion. (171)Yb-(19)F coupling has been observed in the low-temperature (171)Yb NMR spectra of 2 and [Yb(C(6)F(5))(2)(thf)(4)].     

A new series of homoleptic,paramagnetic organochromium derivatives: synthesis,characterization, and study of the magnetic properties

The synthesis and characterization of the triad of organochromium derivatives [Cr(C(6)Cl(5))(4)](n-) (n=0, 1, 2) are described. By treating [CrCl(3)(thf)(3)] with LiC(6)Cl(5) in 1:5 molar ratio, the salt [Li(thf)(4)][Cr(III)(C(6)Cl(5))(4)] (1) was obtained as a violet solid in 57 % yield. Oxidation of 1 with [N(4-BrC(6)H(4))(3)][SbCl(6)] yielded the neutral complex [Cr(IV)(C(6)Cl(5))(4)] (2) as a brown solid in 71 % yield. The arylation of [CrCl(2)(thf)] with LiC(6)Cl(5) under similar conditions as above gave [[Li(thf)(3)](2)(mu-Cl)](2)[Cr(II)(C(6)Cl(5))(4)] (3) as an extremely air- and water-sensitive red solid in 47 % yield. The crystal and molecular structures of 1 and 3 have been established by X-ray diffraction methods. Complex 3 contains the unusual cation [[Li(thf)(3)](2)(mu-Cl)](+) with an almost linear Li-Cl-Li unit (174.2(6)degrees). All four C(6)Cl(5) groups are sigma-bonded to the Cr(II) center, which is located in a square-planar environment. The local geometry around the Cr(III) center in 1 is, in turn, pseudo-octahedral, since two of the C(6)Cl(5) groups act as standard sigma-bonded monodentate ligands, while the other two act as small-bite didentate ligands coordinated through both the ipso-C and one of the ortho-Cl atoms. Compounds 1-3 are paramagnetic with maximum spin multiplicity each (EPR and magnetization measurements).     

Tris(tert-butoxy)siloxy derivatives of boron,including the boronous acid HOB[OSi(O(t)Bu)(3)](2) and the metal (siloxy)boryloxide complex Cp(2)Zr(Me)OB[OSi(O(t)Bu)(3)](2): a remarkable crystal structure with 18 independent molecules in its asymmetric unit

Silanolysis of B(O(t)Bu)(3) with 2 and 3 equiv of HOSi(O(t)Bu)(3) led to the formation of (t)BuOB[OSi(O(t)Bu)(3)](2) (1) and B[OSi(O(t)Bu)(3)](3) (2), respectively. Compounds 1 and 2 are efficient single-source molecular precursors to B/Si/O materials via thermolytic routes in nonpolar media, as demonstrated by the generation of BO(1.5).2SiO(2) (BOSi2(xg)) and BO(1.5).3SiO(2) (BOSi3(xg)) xerogels, respectively. Use of a block copolymer template provided B/Si/O materials (BOSi2(epe) and BOSi3(epe)) with a broad distribution of mesopores (by N(2) porosimetry) and smaller, more uniform particle sizes (by TEM) as compared to the nontemplated materials. Hydrolyses of 1 and 2 with excess H(2)O resulted in formation of the expected amounts of (t)BuOH and HOSi(O(t)Bu)(3); however, reaction of 1 with 1 equiv of H(2)O led to isolation of the new boronous acid HOB[OSi(O(t)Bu)(3)](2) (3). This ligand precursor is well suited for the synthesis of new metal (siloxy)boryloxide complexes via proton-transfer reactions involving the BOH group. The reaction of 3 with Cp(2)ZrMe(2) resulted in formation of Cp(2)Zr(Me)OB[OSi(O(t)Bu)(3)](2) (4) in high yield. This rare example of a transition metal boryloxide complex crystallizes in the triclinic space group Ponemacr; and exhibits a crystal structure with an unprecedented number of independent molecules in its asymmetric unit (i.e., Z' = 18 and Z = 36). This unusual crystal structure presented an opportunity to perform statistical analyses of the metric parameters for the 18 crystallographically independent molecules. Complex 4 readily converts to Cp(2)Zr[OSi(O(t)Bu)(3)](2) (5) upon thermolysis or upon dissolution in Et(2)O at room temperature.     

Reduction of benzophenone and 9(10H)-anthracenone with the magnesium complex [(2,6-iPr2C6H3-bian)Mg(thf)3

The reduction of benzophenone with the magnesium complex [(2,6-iPr(2)C(6)H(3)-bian)Mg(thf)(3)] (1), containing the 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene dianion, affords the pinacolato complex [(2,6-iPr(2)C(6)H(3)-bian)Mg(thf)](2)[micro-O(2)C(2)Ph(4)].(C(6)H(6))(4) (2). The reaction of 1 with 9(10H)-anthracenone yields the 9-anthracenolato complex [(2,6-iPr(2)C(6)H(3)-bian)Mg(OC(14)H(9))(thf)(2)] (3). Complexes 2 and 3 were characterized by elemental analyses, UV/Vis, IR, and ESR spectroscopy, as well as by single crystal X-ray diffraction. Complex 2 dissociates in solution with splitting of the bridging pinacolato unit, forming the biradical diimino/ketyl complex [(2,6-iPr(2)C(6)H(3)-bian)Mg(thf)(OCPh(2))].     

Synthesis and luminescence studies of mono- and C3-symmetric, tris(ligand) complexes of Sm(III), Y(III) and Eu(III) with sulfur-bridged binaphtholate ligands

A series of trivalent mono- and tris(ligand) lanthanide complexes of a sulfur-bridged binaphthol ligand [1,1'-S(2-HOC(10)H(4)Bu(t)(2)-3,6)(2)] H(2)L(SN), have been prepared and characterised both structurally and photophysically. The H(2)L(SN) ligand provides an increased steric bulk and offers an additional donor atom (sulfur) as compared with 1,1'-binaphthol (BINOL), a ligand commonly used to complex Lewis acidic lanthanide catalysts. Reaction of the diol H(2)L(SN) with [Sm[N(SiMe(3))(2)](3)] affords silylamido- and amino- derivatives [Sm(L(SN))[N(SiMe(3))(2)][HN(SiMe(3))(2)]] and the crystallographically characterised [Sm(L(SN))[N(SiMe(3))(2)](thf)(2)] with different degrees of structural rigidity, depending on the presence of coordinating solvents. The binaphthyl groups of the L(SN) ligand act as sensitisers of the metal centred emission, which is observed for the Eu(III) and Sm(III) complexes studied. We have therefore sought to use emission spectroscopy as a non-invasive technique to monitor a monomer-dimer equilibrium in these complexes. A dramatic difference between the emission properties of the unreactive dimeric Sm(III) aryloxide complex, the solvated monomeric analogues and the amido adduct demonstrated the potential use of such a technique. For a few representative lanthanides (Ln = Sm, Eu and Y) the reaction of the dilithium salt Li(2)L(SN) with either [Ln[N(SiMe(3))(2]3)] or [LnCl(3)(thf)(3)] affords only the homoleptic complex [Li(S)(3)][LnL(SN)(3)](S = thf or diethyl ether); we report the structural characterisation of the Sm complex. However, the reactions of this dipotassium salt K(2)L(SN) with [Sm[N(SiMe(3))(2)](3)] or [SmCl(3)(thf)(3)] give only [SmL(SN)N(SiMe(3))(2)], or intractable mixtures respectively, in which no (tris)binaphtholate is observed. The only isolable lanthanide-L(SN) halide adduct so far is [YbL(SN)I(thf)].