Electronic structure and structural phase stability of CuAlX2 (X=S, Se, Te) under pressure

The electronic and structural properties of chalcopyrite compounds CuAlX₂ (X=S, Se, Te) have been studied using the first principle self-consistent Tight Binding Linear Muffin-Tin Orbital (TBLMTO) method within the local density approximation. The present study deals with the ground state properties, structural phase transition, equations of state and pressure dependence of band gap of CuAlX₂ (S, Se, Te) compounds.Electronic structure and hence total energies of these compounds have been computed as a function of reduced volume. The calculated lattice parameters are in good agreement with the available experimental results. At high pressures, structural phase transition from bct structure (chalcopyrite) to cubic structure (rock salt) is observed. The pressure induced structural phase transitions for CuAlS₂, CuAlSe₂, and CuAlTe₂ are observed at 18.01, 14.4 and 8.29 GPa, respectively. Band structures at normal as well as for high-pressure phases have been calculated. The energy band gaps for the above compounds have been calculated as a function of pressure, which indicates the metallic character of these compounds at high-pressure fcc phase. There is a large downshift in band gaps due to hybridatization of the noble-metal d levels with p levels of the other atoms.     

Electronic structure calculations of lead chalcogenides PbS, PbSe, PbTe

In this work, we have extended our study of the mechanical properties and the electronic structure of PbTe to include other Pb chalcogenide compounds (PbSe, PbS). The calculations were performed self-consistently using the scalar-relativistic full-potential linearized augmented plane wave method. Both the local density approximation (LDA) and the generalized gradient approximation (GGA) to density-functional theory were applied.The equilibrium lattice constants and the bulk modulus of a number of structures (NaCl, CsCl, ZnS) were calculated as well as the elastic constants for the structures (NaCl, CsCl). The NaCl structure is found to be the most stable one among all the three phases considered. We have found that the GGA predicts the elastic constants in good agreement with experimental data.Both the LDA and GGA were successful in predicting the location of the band gap at the L point of the Brillouin zone but they are inconclusive regarding the value of the band-gap width. To resolve the issue of the gap, we performed Slater-Koster (SK) tight-binding calculations, including the spin-orbit coupling in the SK Hamiltonian. The SK results that are based on our GGA calculations give the best agreement with experiment.Results are reported for the pressure dependence of the energy gap of these compounds in the NaCl structure. The pressure variation of the energy gap indicates a transition to a metallic phase at high pressure. Band structure calculations in the CsCl structure show a metallic state for all compounds. The electronic band structure in the ZnS phase shows an indirect band gap at the W and X point of the Brillouin zone.     

High pressure effect on structural and mechanical properties of some LnO (Ln=Sm, Eu, Yb) compounds

The structural and mechanical properties of LnO (Ln=Sm, Eu, Yb) compounds have been investigated using a modified interionic potential theory, which includes the effect of Coulomb screening. We predicted a structural phase transition from NaCl (B₁)- to CsCl (B₂)-type structure and elastic properties in LnO compounds at very high pressure. The anomalous properties of these compounds have been correlated in terms of the hybridisation of f-electrons of the rare earth ion with conduction band and strong mixing of f-states of lanthanides with the p-orbital of neighbouring chalcogen ion. For EuO, the calculated transition pressure, bulk modulus and lattice parameter are close to the experimental data. The nature of bonds between the ions is predicted by simulating the ion-ion (Ln-Ln and Ln-O) distances at high pressure. The second order elastic constants along with shear modulus and Young's modulus, elastic anisotropy and Poisson's ratio are also presented for these oxides.     

Trends in the band-gap pressure coefficients and bulk moduli in different structures of ZnGa2S4, ZnGa2Se4 and ZnGa2Te4

We have performed a first-principles investigation for the family of compounds ZnGa2X4 (X = S, Se, Te). The properties of two possible structures, defect chalcopyrite and defect famatinite are both calculated. We reveal that ZnGa2S4 and ZnGa2Se4 have direct band gaps, while ZnGa2Te4 has an indirect band gap. The local density approximation band gaps are found to be very different in two structures, while the lattice parameters and bulk moduli are similar. We extend Cohen’s empirical formula for zinc-blende compounds to this family of compounds. The pressure coefficients are calculated and metallization pressures are discussed. We find that agi remains fairly constant when the group-Ⅵ element X is varied in ZnGa2X4 (Ⅱ-Ⅲ2 -Ⅵ4 ).     

Pressure induced phase transition in rare earth mono-antimonides

Pressure induced structural phase transition of mono-antimonides of lanthanum, cerium, praseodymium and neodymium (LnSb, Ln=La, Ce, Pr and Nd) has been studied theoretically using an inter-ionic potential with modified ionic charge which parametrically includes the effect of Coulomb screening by the delocalized f electrons of rare earth (RE) ion. The anomalous structural properties of these compounds have been interpreted in terms of the hybridization of f electrons with the conduction band and strong mixing of f states of Ln ion with the p orbital of neighbouring antimonide ion. All the four compounds are found to undergo from their initial NaCl (B₁) phase to body centered tetragonal (BCT) phase at high pressure and agree well with the experimental results. The body centered tetragonal phase is viewed as distorted CsCl structure and is highly anisotropic with c/a=0.82. The transition pressure of LnSb compounds is observed to increase with decreasing lattice constant in NaCl phase. The nature of bonds between the ions is predicted by simulating the ion-ion (Ln-Ln and Ln-Sb) distances at high pressure. The calculated values of elastic constants are also reported.     

Structural,mechanical and thermal properties of some Holmium Pnictides under pressure: A theoretical approach

The high pressure structural, elastic and thermal properties of holmium pnictides HoX (X=N, P, As and Bi) were investigated theoretically by using an inter-ionic potential theory with modified ionic charge parameter. We have predicted a structural phase transition from NaCl (B₁) to CsCl (B₂)-type structure at pressure of 139 GPa for HoN, 52 GPa for HoP, 44 GPa for HoAs and 26 GPa for HoBi. Other properties, such as lattice constant, bulk modulus, cohesive energy, second and third-order elastic constants were calculated and compared with the available experimental and theoretical data. In order to gain further information the brittle behaviour of these compounds was observed. Some other properties like Shear modulus (G), Young's modulus (E), Poisson's ratio (ν), anisotropy factor (A), sound velocities, Debye temperature (θ_D) were calculated. The variation of elastic constants (C₁₁ and C₄₄) and Debye temperature (θ_D) with pressure was also presented.     

Spin-polarized calculations of electronic structures in ferromagnetic and antiferromagnetic Zn0.75TM0.25Se (TM=Cr,Fe, Co and Ni)

In this work, we aim to examine the spin-polarized electronic band structures, the local densities of states as well as the magnetism of Zn_1−xTM_xSe (TM=Cr, Fe, Co and Ni) diluted magnetic semiconductors in the ferromagnetic (FM) and antiferromagnetic (AFM) phases, and with 25% of TM. The calculations are performed by the developed full-potential augmented plane wave plus local orbitals method within the spin density functional theory. As exchange-correlation potential we used the generalized gradient approximation (GGA) form. We treated the ferromagnetic and antiferromagnetic phases and we found that all compounds are stable in the ferromagnetic structure. Structural properties are computed after total energy minimization. Our results show that the cohesive energies of Zn_0.75TM_0.25Se are greater than that of zinc blende ZnSe. We discuss the electronic structures, total and partial densities of states, local moments and the p–d exchange splitting. Furthermore, we found that p–d hybridization reduces the local magnetic moment of TM and produces small local magnetic moments on the nonmagnetic Zn and Se sites. We found also that in the AFM phase the TM local magnetic moments are smaller than in the FM phase; this is due to the greater interaction of the TM d-up and d-down orbitals.     

Structural,elastic, electronic and optical properties of the cubic perovskites CaXO3 (X=Hf and Sn)

The structural, elastic, electronic and optical properties of CaXO₃ compounds with the cubic perovskites structure have been investigated, by employing a first principles method, using the plane wave pseudo potential calculations (PP-PW), based on the density functional theory (DFT), within the local density approximation (LDA). The elastic constants and their pressure dependence are calculated using the static finite strain technique. We derived the bulk, shear and Young’s moduli for ideal monocrystalline and for polycrystalline CaXO₃ aggregates which we have classified as ductile in nature. Band structures reveal that these compounds are indirect energy band gap (R-G) semiconductors; the analysis of the site and momentum projected densities, valence charge density bond length, bond population and Milliken charges, shows that bonding is of covalent–ionic nature. We have found that the elastic constants C₁₁, C₁₂, C₄₄ are in good correlation with the bonding properties. The optical constants, including the dielectric function, optical reflectivity, refractive index and electron energy loss, are calculated for radiation up to 20 eV.     

First principles study of structural, elastic, electronic and optical properties of the cubic perovskite BaHfO3

First principles study of structural, elastic, electronic and optical properties of the cubic perovskite-type BaHfO₃ has been reported using the pseudo-potential plane wave method within the local density approximation. The calculated equilibrium lattice is in a reasonable agreement with the available experimental data. The elastic constants and their pressure dependence are calculated using the static finite strain technique. A linear pressure dependence of the elastic stiffnesses is found. Band structures show that BaHfO₃ is a direct band gap between the occupied O 2p and unoccupied Hf d states. The variation of the gap versus pressure is well fitted to a quadratic function. Furthermore, in order to understand the optical properties of BaHfO₃, the dielectric function, absorption coefficient, optical reflectivity, refractive index, extinction coefficient, and electron energy loss are calculated for radiation up to 30 eV. We have found that O 2p states and Hf 5d states play a major role in the optical transitions as initial and final states, respectively. This is the first quantitative theoretical prediction of the elastic, electronic and optical properties of BaHfO₃ compound, and it still awaits experimental confirmation.     

High pressure behavior of alkaline earth tellurides

We have predicted high pressure structural behavior and elastic properties of alkaline earth tellurides (AETe; AE = Ca, Sr, Ba) by using two body interionic potential approach with modified ionic charge (Z _m e). This method has been found quite satisfactory in case of the rare earth compounds. The equation of state curve, structural phase transition pressure from NaCl (B1) to CsCl (B2) phase and associated volume collapse at transition pressure of alkaline earth tellurides (AETe) obtained from this approach, so have been compared with experimentally measured data reveal good agreement. We have also investigated bulk modulus, second and third order elastic constants and pressure derivatives of second order elastic constants at ambient pressure which shows predominantly ionic nature of these compounds. First time, we have calculated the Poisson ratio, Young and Shear modulus of these compounds.      

Pressure induced structural phase transition and electronic properties of actinide monophospides: Ab-initio calculations

We have investigated the structural and electronic properties of monophospides of thorium, uranium and neptunium. The total energy as a function of volume is obtained by means of the self-consistent tight binding linear muffin-tin-orbital (TB-LMTO) method within the local density approximation (LDA). From the present study with the help of total energy calculations it is found that ThP, UP and NpP are stable in NaCl-type structure at ambient pressure. The structural stability of ThP, UP and NpP changes under the application of pressure. We predict a structural phase transition from NaCl-type (B₁-phase) structure to CsCl-type (B₂-phase) structure for these phospides in the pressure range of 37.0-24.0 GPa (ThP-NpP). We also calculate lattice parameter (a₀), bulk modulus (B₀), band structure and density of states. From energy band diagram it is observed that ThP, UP and NpP exhibit metallic behavior. The calculated equilibrium lattice parameters and bulk modulus are in good agreement with experimental and theoretical work.     

High-pressure behaviour and elastic properties of heavy rare-earth Gd monopnictides

Pressure-induced structural phase transition of gadolinium monopnictides GdX (X=As and Sb) has been studied theoretically using an inter-ionic potential theory. This method has been found quite satisfactory in case of the pnictides of rare-earth and describes the crystal properties in the framework of rigid-ion model. We have modified the ionic charge so that it may include the Coulomb-screening effect by the delocalization of f electron of the rare-earth ion. The anomalous structural properties of these compounds with many f electrons have been interpreted in terms of the hybridization of f electrons with the conduction band and strong mixing of f states of Gd ion with the p orbital of neighbouring pnictogen ion. Both the compounds are found to undergo from their initial NaCl (B₁) structure to body centered tetragonal (BCT) structure at high pressure and agree well with the experimental results. The BCT structure is viewed as distorted CsCl structure and is highly anisotropic with c/a=0.82–0.85. The nature of bonds between the ions is predicted by simulating the ion–ion (Gd–Gd and Gd–X) distance at high pressure. Elastic properties of these compounds have also been studied with their second-order elastic constants.     

Pressure-induced structural phase transformation and elastic properties of transition metal mononitrides

The high-pressure structural phase transition in six transition metal mononitrides (TMNs) (M=Ti, Mo, V, Nb, Hf, and Zr), have been studied using a two-body interionic potential theory which includes the effect of Coulomb screening due to the semi-metallic nature of these compounds. The present theoretical results have been compared with the corresponding experimental and predictions of LDA theory. These TMN compounds have been found to undergo NaCl (B₁) to CsCl (B₂) phase transition, at a pressure quite high as compared to other binary systems. We have also predicted the elastic constants. It is shown that these binary materials are partially ionic in nature and the structural transformation is analogous to several other ionic binary systems.     

Influence of valence electron concentration on elastic, electronic and optical properties of the alkaline-earth tin oxides A3SnO (A=Ca, Sr and Ba): A comparative study with ASnO3 compounds

By employing first principles method of the plane wave pseudo potential calculations (PP-PW), based on the density functional theory (DFT), within the local density approximation (LDA), the correlation between valence electron concentration and structural, elastic, electronic as well as optical properties of A₃SnO and ASnO₃ compounds where A=Ca, Sr and Ba are investigated. The elastic constants and their pressure dependence are calculated using the static finite strain technique. We derived the bulk, shear and Young's moduli for ideal monocrystalline and for polycrystalline A₃SnO and ASnO₃ aggregates. Band structures reveal that alkaline-earth tin oxides A₃SnO are direct energy band gap (G-G) materials.The hardness of these compounds was explained using chemical bonding properties and Milliken charges transfer. The optical constants, including the dielectric function, optical reflectivity, refractive index and electron energy loss, are calculated for radiation up to 20 eV. We have found that the static dielectric constants of all these compounds are in good agreement with Penn model.     

A first-principle study of the structural, elastic, lattice dynamical and thermodynamic properties of PrX (X=P, As)

The structural, phase transition, elastic, lattice dynamic and thermodynamic properties of rare-earth compounds PrP and PrAs with NaCl (B1), CsCl (B2), ZB (B3), WC (B_h) and CuAu (L1₀) structures are investigated using the first principles calculations within the generalized gradient approximation (GGA). For the total-energy calculation, we have used the projected augmented plane-wave (PAW) implementation of the Vienna Ab-initio Simulation Package (VASP). Specifically, some basic physical parameters, e.g. lattice constants, bulk modulus, elastic constants, shear modulus, Young's modulus and Poison's ratio, are predicted. The obtained equilibrium structure parameters are in excellent agreement with the experimental and theoretical data. The temperature and pressure variations of the volume, bulk modulus, thermal expansion coefficient, heat capacity and Debye temperature are calculated in wide pressure and temperature ranges. The phonon dispersion curves and corresponding one-phonon density of states (DOS) for both compounds are also computed in the NaCl (B1) structure.     

Structural, high pressure and elastic properties of transition metal monocarbides: A FP-LAPW study

The structural, elastic and thermal properties of four transition metal monocarbides ScC, YC (group III), VC and NbC (group V) have been investigated using full potential linearized augmented plane wave (FP-LAPW) method within generalized gradient approximation (GGA) both at ambient and high pressure. We predict a B₁ to B₂ structural phase transition at 127.8 and 80.4 GPa for ScC and YC along with the volume collapse percentage of 7.6 and 8.4%, respectively. No phase transition is observed in case of VC and NbC up to pressure 400 and 360 GPa, respectively. The ground state properties such as equilibrium lattice constant (a₀), bulk modulus (B) and its pressure derivative (B′) are determined and compared with available data. We have computed the elastic moduli and Debye temperature and report their variation as a function of pressure.     

First-principles investigation of structural,elastic, electronic and magnetic properties of Be0.75Co0.25Y (YS,Se and Te) compounds

We have theoretically investigated the structural, elastic, electronic and magnetic properties of Be_0.75Co_0.25Y (YS, Se and Te) alloys, in their zinc-blend phase. This study is carried out by using the full-potential augmented plane wave plus local orbitals method within the density functional theory. Foe computing the exchange-correlation potential, the Wu and Cohen generalized gradient approximation is employed to calculate structural and elastic properties whereas the modified Becke and Johnson potential local density approximation is utilized to examine electronic and magnetic properties. By minimizing the total energy in paramagnetic (PM) and ferromagnetic (FM) phases, it is found the studied compounds are stable in FM structure. The mechanical behavior of the studied compounds is reported with the calculation of shear modulus, Young's modulus, and Poisson's ratio provides. Such mechanical aspects might be useful for the experimentalists to study the mechanical properties upon alloying BeY compounds with Co. We also compute electronic structures, density of states (total and partial), pd-exchange splitting and magnetic moments. Moreover, bond nature is studied by estimating the spin polarized charge densities of Be_0.75Co_0.25Y (YS, Se and Te).     

First-principles calculation of structural stability,lattice dynamic and thermodynamic properties of BeX (X = S,Se and Te) compounds under high pressure

The phase transitions, lattice dynamical and thermodynamic properties of BeS, BsSe and BeTe at high pressure have been investigated with the density functional theory. The calculated equilibrium structural parameters agree well with the available experimental and theoretical values. The phase transition pressures from the zinc-blende (ZB) to the nickel arsenide (NiAs) phase of these compounds are determined. The calculated phonon dispersion curves of these compounds in ZB phase at zero pressure do not show any anomaly or instability. Dynamically, the ZB phase of BeS, BeSe and BeTe is found to be stable near transition pressures P_T. Within the quasiharmonic approximation, the thermodynamic properties including the thermal expansion coefficient, heat capacity at constant volume, heat capacity at constant pressure and entropy are predicted.     

First-principle study of the structural,electronic, and thermodynamic properties of cuprous oxide under pressure

Cuprous oxide is selected as a promising material for photovoltaic applications. Density functional theory is used to study the structural, electronic, and thermodynamic properties of cuprous oxide by using the local density approximation and generalized-gradient approximation. The effect of pressure on the structural and electronic properties of Cu₂O is investigated. This study confirms and characterizes the existence of new phases. Hexagonal and tetragonal phases are not completely indentified. We focus on the phase transition of the cuprous oxide under hydrostatic pressure to tetragonal and hexagonal (CdI₂) structures. Variation of enthalpy with pressure is used to calculate the pressure of the phase transition.