Comparison of sample preparation methods based on proteolytic enzymatic processes for Se-speciation of edible mushroom (Agaricus bisporus) samples

A sequential sample preparation process was developed for the speciation analysis for Se-enriched edible mushroom, Agaricus bisporus containing 110.2 mug of total Se/g sample. Five different sample extraction methods were compared and the most efficient method (a three-step process involving the use of water extraction and two proteolytic enzymes - pepsin and trypsin) proved to be the most suitable for extracting selenium, with an extraction efficiency of 75%. As the analogues of these enzymes play an important role in human digestion the bioavailability of the selenium present in the sample was estimated. Selenocystine (SeCys(2)) and Se(IV) were detected in considerable amounts (27.7 mug Se/g sample and 46.4 mug Se/g sample, respectively). For the quality control of peak identification a spiking procedure was developed, using a low selenium mushroom containing 4.3 mug of total Se/g sample. During the analysis with HPLC-HHPN (Hydraulic High Pressure Nebuliser)-AFS complicated background effects and matrix problems were observed: stable and reproducible signals generated by the low selenium mushroom and the compounds used in sample preparation were detected. The three-step sample preparation method connected with the HPLC-HHPN-AFS system proved to be applicable for the speciation analysis of the Se-enriched Agaricus bisporus.     

A sequential extraction procedure for an insight into selenium speciation in garlic

A sequential extraction procedure was developed for the fractionation of different classes of selenium species present in garlic. The consecutive steps included leaching with water, extraction of cell-wall bound species after lysis with a mixture of cellulase, chitinase and β-glucanase completed by a proteolytic attack, extraction with HCl to liberate the residual organic bound species and finally, extractions with sulfite solution and CS₂ to complete the mass balance by the recovery of Se⁰ and Se²⁻, respectively. Selenium speciation in the aqueous fractions was probed by anion-exchange and ion-pairing reversed-phase HPLC-ICP MS after purification by preparative size-exclusion LC. It was found to be strongly affected by the sample redox conditions. The peak identity was matched with a mixture of 9 compounds expected to be present in allium plants; electrospray QTOF MS turned out to be unsuccessful. Selenite, selenate and selenomethionine were the dominating species present.     

分子荧光光谱法测定富硒大米中的痕量硒

硒(Ⅳ)与DAN(2,3-二氨基萘)生成具有荧光特性的4,5-苯并苤硒脑,可用分子荧光光谱法测定,优化测定的实验条件,建立了快速准确测定大米中痕量硒的方法.结果表明,其最佳测定条件为:pH=2.0,反应温度为80℃,1.0×10-5 mol/L十六烷基溴化吡啶用作表面活性剂,环己烷萃取条件下,增敏效果明显,在0～0.0...     

Evaluation of different sample extraction strategies for selenium determination in selenium-enriched plants (Alliumsativum and Brassicajuncea) and Se speciation by HPLC-ICP-MS

Several sample extraction techniques have been evaluated in order to obtain highest selenium (Se) extraction efficiency in two types of selenium-enriched plants (Allium sativum and Brassica juncea). Three extracting solutions have been studied for this purpose: 0.1 M HCl, 25 mM ammonium acetate buffer (pH 5.6) and protease in aqueous solution. In each case, the effect of the ultrasonic probe during extraction was also evaluated. Selenium extraction yields were calculated based on the ICP-MS determination of the total selenium content in the corresponding extracts and in the plant tissue after its microwave digestion. The action of ultrasounds allowed the reduction on the extraction time while maintaining good Se recoveries (which ranged from 75 to 120% of the total Se in the plant). The accuracy of total Se determination was controlled by analyzing a reference material (aquatic plant, BCR-670). On the other hand, speciation studies of the extracts were carried out by using ion-pairing reversed phase and size exclusion/ion exchange (Shodex Asshipak) liquid chromatographic columns. The two separation mechanisms were suitable to isolate the main extractable Se species which were identified as Se-methyl selenocysteine and Se-methionine in both systems. The extracts of both plants (A. Sativum and B. juncea) exhibited also the presence of several unknown Se-species.     

Development of new analytical methods for selenium speciation in selenium-enriched yeast material

A sequential extraction allowing the discrimination of water-soluble and non-soluble selenium fractions has been developed to evaluate the availability of selenium (Se) in an Se-enriched yeast candidate reference material. The fractionation of selenium-containing compounds in the extracts was achieved on preparative grade 200 Superdex 75 and columns. It showed that water-soluble selenium is present in several fractions with a large mass distribution. Low-molecular- (< or = 10,000) and high-molecular-mass selenocompounds (range 10,000-100,000) were considered separately for further experiments. The analytical approach for low-molecular-mass selenocompounds was based onanion-exchange HPLC with on-line inductively coupled plasma (ICP) MS for quantitative analysis. Selenocystine, selenomethionine, selenite and selenate were quantified in the fractions isolated in preparative chromatography. The study revealed the existence of various unidentified Se species in yeast material. The Se-containing proteins in the yeast material have been further separated and selenium quantified by the combination of gel electrophoresis and electrothermal vaporization-ICP-MS. This new approach allows the separation of the proteins with high resolution by sodium dodecylsulfate-polyacrylamide gel electrophoresis and the sensitive determination of selenium in the protein bands.     

Enhancement of enzymatic digestion of Antarctic krill and successive extraction of selenium organic compounds by ultrasound treatment

In a previous work we described the isolation of selenium organic species from Antarctic krill after enzymatic hydrolysis. In this paper we present the results of the influence of ultrasonication on the enzymatic treatment and the successive isolation of selenomethionine. We showed that ultrasound-assisted enzymatic digestion leads to quantitative release of selenium in the soluble fraction and recovery of selenomethionine from the krill protein within a time 2 orders of magnitude shorter. The solubilised sample was analysed by size-exclusion chromatography and the selenomethionine content was quantified by high-performance liquid chromatography–inductively coupled plasma mass spectrometry. In total, 99% of the selenomethionine in the krill hydrolysate was recovered from the chromatographic fractions. It corresponds to 35% of the total selenium content in Antarctic krill. Monitoring by microscopy of the changes in the structure of the krill samples during ultrasonication suggested that the enhancement of the ultrasound-assisted enzymatic reaction was mainly due to decrease of mass transfer limitations. A reference experiment for ultrasound-assisted enzymatic digestion of cell-free protein in a homogeneous system does not exclude direct influence of the ultrasound energy on the enzyme–substrate interaction.     

Speciation of selenium in selenium-enriched shiitake mushroom, Lentinula edodes

The major selenium compound in an aqueous extract of the most popular mushroom in Eastern Asian countries, shiitake (Lentinula edodes), fortified with selenium (Se) was identified by means of hyphenated techniques, i.e. HPLC-inductively coupled argon plasma mass spectrometry and HPLC-electrospray ionization mass spectrometry (HPLC–ICP MS and HPLC–ESI MS). Sixty-eight per cent of the total Se in the selenized shiitake was extracted with water, and 49.8% of the Se in the water extract was eluted in the high molecular mass fraction (>40,000 kDa) before incubation at 37 °C. After incubation, 40.6% of the Se in the water extract was eluted in a lower molecular mass fraction and the Se eluted in the high molecular mass fraction had decreased to 14.0%, suggesting that the major selenium compound in the water extract was initially in a form bound to macromolecule(s) and was then enzymatically liberated from the macromolecule(s). The retention time of the liberated selenium compound in HPLC–ICP MS matched that of selenomethionine (SeMet), and the masses of molecular and fragment ions detected by HPLC–ESI MS also suggested that the selenium compound was SeMet. The selenized shiitake accumulated Se as SeMet, and SeMet might be bound to the water extractable high molecular mass protein(s).Electronic Supplementary Material Supplementary material is available for this article at     

An attempt to differentiate HPLC-ICP-MS selenium speciation in natural and selenised Agaricus mushrooms using different species extraction procedures

Total determination and speciation analysis of Se in commercial and selenised Agaricus mushrooms have been performed to investigate the Se species naturally occurring in non-enriched mushrooms as well as those present in specimens grown in a Se-enriched medium. Mushroom aqueous and enzymatic extracts have been analysed by three complementary chromatographic separation mechanisms (size-exclusion, anion-exchange and reversed-phase) coupled to an inductively coupled plasma mass spectrometer with an octopole reaction system. Post-column isotope dilution analysis has been used on-line with the separations for quantification of the Se species eluted. The ⁷⁸Se-to-⁷⁷Se isotope ratio was monitored after adequate corrections for both total determinations and Se species quantitative speciation. The results showed marked differences not only in total Se contents but also in Se species found in the two types of Agaricus mushrooms investigated. Selenomethionine was detected in both of them (free in commercial mushrooms and incorporated into proteins in selenised ones) together with a number of unknown selenocompounds.     

AE-HG-AFS测定长期汞暴露人群补硒后尿中硒的形态

建立了一种利用阴离子交换高效液相色谱与氢化物发生原子荧光光谱联用同时测定四、六价硒及硒代半胱氨酸(SeCys)形态的方法。优化了六价硒的还原条件及仪器检测参数,以不同浓度的柠檬酸铵作为流动相,在10 min内同时分离了四、六价硒及硒代半胱氨酸(SeCys)。采用加标法定量,加标回收率在90%～119%之间,相对标准偏差为1.6%～3.1%(100μg/L),四、六价硒及硒代半胱氨酸(SeCys)的检出限分别为0.32μg/L、0.47μg/L和0.44μg/L(进样量为100μL)。应用该法对长期汞暴露人群补硒后尿中的小分子硒的形态进行了分析,仅检测到硒代半胱氨酸(SeCys)。     

Solvent extraction of tetravalent selenium

Summary A systematic study has been carried out on the extraction of SeI₄, by various water-immiscible organic solvents. Extraction has been investigated as a function of H₂SO₄ and KI concentrations. It has been found that the Se(IV) extraction is appreciably increased by addition of iodide ion to sulphuric acid solutions. In addition, the presence of water-miscible alcohols and acetone was found to enhance Se(IV) extraction from H₂SO₄-KI solutions. In the light of the obtained results an extraction mechanism is suggested.

---

Untersuchungen zur Extraktion von vierwertigem Selen

Zusammenfassung Es wurde eine systematische Untersuchung zur Extraktion von SeI₄ mittels verschiedener mit Wasser nicht mischbarer organischer Lösungsmittel unternommen. Es wurde die Abhängigkeit der Extraktion von der Konzentration an H₂SO₄ und KI untersucht, wobei sich zeigte, daß die Se(IV)-Extraktion durch Zusatz von Iodid-Ionen zur schwefelsauren Lösung beträchtlich zu steigern ist. Weiters wurde gefunden, daß der Zusatz von wassermischbaren Alkoholen oder Aceton ebenfalls die Extraktion aus H₂SO₄-KI-Lösungen verbessert. Auf Basis dieser Resultate wird ein Extraktionsmechanismus vorgeschlagen.

     

Biogenic Silver Nanoparticles from Two Varieties of Agaricus bisporus and Their Antibacterial Activity

Agaricus bisporus, the most widely cultivated mushroom, is safe to eat and enriched with protein and secondary metabolites. We prepared silver nanoparticles (AgNPs) from two varieties of A. bisporus and tested their antibacterial activity The synthesized AgNPs were initially confirmed by UV-Vis spectroscopy peaks at 420 and 430 nm for white and brown mushrooms AgNPs, respectively. AgNPs were further characterized by zeta sizer, transmission electronic microscopy (TEM), Fourier transform infrared (FTIR), and energy-dispersive X-ray spectroscopy (EDX) prior to antibacterial activity by the well diffusion method against six bacterial strains which include Staphylococcus aureus, Staphylococcus epidermis, Bacillus subtilis, Escherichia coli, Salmonella typhi, and Pseudomonas aeruginosa. TEM results revealed a spherical shape with an average diameter of about 11 nm in the white mushroom extract and 5 nm in the brown mushroom extract. The presence of elemental silver in the prepared AgNPs was confirmed by EDS. The IR spectrum of the extract confirmed the presence of phenols, flavonoids, carboxylic, or amide groups which aided in the reduction and capping of synthesized AgNPs. The AgNPs from both extracts showed almost the same results; however, nanoparticles prepared from brown mushrooms were smaller in size with strong antibacterial activity.     

A mushroom (Agaricus bisporus) tissue homogenate based alcohol oxidase electrode for alcohol determination in serum

To construct homogenized tissue based biosensors by using plant tissue materials is a relatively new development in the biosensor technology. In this study, a homogenized mushroom (Agaricus bisporus) tissue based electrode in which alcohol oxidase activity was developed by immobilizing with gelatin and cross-linking agent glutaraldehyde at dissolved oxygen probe for determination of ethyl alcohol. The electrode response depends linearly on ethyl alcohol concentration between 0.2 and 20 mM. In the optimization studies, phosphate buffer (pH 7.5, 50 mM) and 35 degrees C were obtained as the optimum conditions. By using the electrode prepared we have made approximately 60 measurements in 10-h period, and response time of the electrode is 2 min for each measurement.     

A sequential enzymatic microreactor system for ethanol detection of gasohol mixtures

A sequential enzymatic double microreactor system with dilution line was developed for quantifying ethanol from gasohol mixtures, using a colorimetric detection method, as a new proposal to the single micro reactor system used in previous work. Alcohol oxidase (AOD) and horseradish peroxidase (HRP) immobilized on glass beads, one in each microreactor, were used with phenol and 4-aminophenazone and the red-colored product was detected with a spectrophotometer at 555 nm. Good results were obtained with the immobilization technique used for both AOD and HRP enzymes, with best retention efficiencies of 95.3 ± 2.3% and 63.2 ± 7.0%, respectively. The two microreactors were used to analyze extracted ethanol from gasohol blends in the range 1–30 % v/v (10.0–238.9 g ethanol/L), with and without an on-line dilution sampling line. A calibration curve was obtained in the range 0.0034–0.087 g ethanol/L working with the on-line dilution integrated to the biosensor—FIA system proposed. The diluted sample concentrations were also determined by gas chromatography (GC) and high-pressure liquid chromatography (HPLC) methods and the results compared with the proposed sequential system measurements. The effect of the number of analysis performed with the same system was also investigated.     

Identification of selenium species in selenium-enriched Lens esculenta plants by using two-dimensional liquid chromatography-inductively coupled plasma mass spectrometry and [77Se]selenomethionine selenium oxide spikes

Selenium speciation in Se-enriched Lens esculenta grown in hydroponic culture containing inorganic selenium as Na(2)SeO(3) and Na(2)SeO(4) was performed. After 16 days of growth, the plants were collected and divided in two parts, roots and stems and then analysed to identify and quantify selenium species. Speciation studies of the enzymatic extracts were carried out by using anion-exchange (PRP-X100) and size-exclusion/ion-exchange (Shodex Asahipak) columns coupled to inductively coupled plasma mass spectrometry (ICP-MS). The need of using two independent chromatographic mechanisms for unambiguous species identification is demonstrated. Moreover, the use of a [(77)Se]selenomethionine selenium oxide spike turned out to be critical to discriminate between selenium selenomethioine selenium oxide and selenocysteine.     

Iron fractionation for corrosion products from natural gas pipelines by continuous-flow sequential extraction

The forms and quantities of iron species in corrosion product samples from natural gas pipelines were examined, using a continuous-flow sequential extraction system. Sequential extraction consists of four steps that dissolve water soluble iron (FeSO₄), acid soluble iron (FeCO₃), reducible iron (Fe-(oxyhydr)oxides) and oxidisable iron (FeS₂) fractions, respectively. Selectivity of extracting reagents for particular iron species was evaluated by determination of co-extracted anions, using ion chromatography, and evolved CO₂, using indirect flame atomic absorption spectrometer (FAAS). Iron was found predominantly in the reducible fraction (61–99%), indicating that Fe-(oxyhydr)oxides are the major constituents of the corrosion products.      

Improved specific separation of selenium by solvent extraction with saturated monoketones

Acetophenone is the most suitable ketone for extraction of selenium into chloroform. Methods are given for determination of selenium in copper concentrates and metallic tellurium.     

Development of a standardized sequential extraction protocol for simultaneous extraction of multiple actinide elements

Sequential extraction is a useful technique for assessing the potential to leach actinides from soils; however, current literature lacks uniformity in experimental details, making direct comparison of results impossible. This work continued development toward a standardized five-step sequential extraction protocol by analyzing extraction behaviors of ²³²Th, ²³⁸U, ^239,240Pu and ²⁴¹Am from lake and ocean sediment reference materials. Results produced a standardized procedure after creating more defined reaction conditions to improve method repeatability. A NaOH fusion procedure is recommended following sequential leaching for the complete dissolution of insoluble species.     

Hydrogenation condition for sequential processes to (+)-trifluoromethyl monomorine

(+)-Trifluoromethyl monomorine has been synthesized under mild hydrogenation condition by initiating reductive cleavage of the oxazoline ring followed by deprotection and intramolecular reductive amination reaction. The precursors could be prepared concisely by condensation and palladium-catalyzed coupling reaction.     

Evaluating adsorption ability of granite to radioselenium by chemical sequential extraction

A good understanding of the migration of selenite, Se(IV), through deep granitic layers depends on a good understanding of the geochemistry of these layers. Chemical sequential extraction is applied herein to evaluate the ability of granite to adsorb Se(IV) in DW, GW and SW systems. The experimental results indicate that the removal of crystalline Fe oxides reduces the adsorption of Se(IV), suggesting its importance in granite. The normalized concentrations of Se(IV) adsorbed onto crystalline Fe oxides is approximately 0.0301, 0.0330 and 0.0335 mole Se(IV) adsorbed/mole of Fe in DW, GW and SW systems. Kinetic adsorption experiments are conducted to elucidate the results of the chemical sequential extraction. Both the treated and the untreated granite take the same time to reach their equilibrium, suggesting that crystalline Fe oxides dominate the adsorption of Se(IV). Meanwhile, the one-site model suffices to simulate the kinetics of adsorption.     

Stability of total selenium and selenium species in lyophilised oysters and in their enzymatic extracts

To obtain reliable information on speciation analysis it is necessary to previously evaluate the stability of the species in the sample of interest. Furthermore, in those cases in which sample treatment to extract the species is time-consuming, an evaluation of how to maintain species integrity in the extracts is paramount. Thus, the present paper reports the stability of total Se, SeMet and TMSe+ in freeze-dried oyster and in the enzymatic extracts stored in Pyrex and polyethylene containers at different temperatures (-18, 4 and 20 degrees C). Total selenium determinations and Se speciation were carried out by HG-AAS after acid digestion in a microwave oven and by on-line coupling of cation exchange HPLC-ICP-MS after enzymatic hydrolysis, respectively.The results obtained for the freeze-dried sample showed that total Se and the selenium species evaluated are stable for at least 12 months, under all the conditions tested. However, Se species in the enzymatic extracts are only stable for 10 days if stored at 4 degrees C in Pyrex containers. These results show that the extracts do not necessarily have to be analysed just after sample treatment.