Acoustic properties of multiferroic PbFe1/2Ta1/2O3

The longitudinal acoustic wave velocity and attenuation in PbFe_1/2Ta_1/2O₃ ceramics have been measured by pulse-echo technique in the temperature range from 4.2 to 530 K. The anomalies observed in the sound velocity and attenuation behavior versus temperature were correlated with Burns temperature, temperature range of the coexistence of relaxor ferroelectric and antiferromagnetic states, and a suggested second antiferromagnetic phase transition at low temperatures.     

Dielectric properties and temperature stability of BaTiO3 co-doped La2O3 and Tm2O3

The influence of La₂O₃ and Tm₂O₃ co-doping on the dielectric properties and the temperature stability of BaTiO₃ was investigated. BaTiO₃ ceramics were prepared with the compositional formula of (Ba_1−xLa_x)(Ti_1-x/4−yTm_y)O₃. La₂O₃ and Tm₂O₃ co-doping in BaTiO₃ mainly had effects on an increase in the dielectric constant and the temperature stability, respectively. The increase of La₂O₃ concentration and the decrease of Tm₂O₃ concentration in BaTiO₃ resulted in a decrease of lattice parameter and tetragonality because La³⁺ ion substituting for Ba site is smaller than Ba²⁺ ion and Tm³⁺ ion substituting for Ti site is larger than Ti⁴⁺ ion. With the increase of La₂O₃ and the decrease of Tm₂O₃, the dielectric constant of BaTiO₃ was enhanced in spite of the reduction of tetragonality. P-E hysteresis measurements revealed that this phenomenon was based on the improvement of remanent polarization with the increase of La₂O₃ concentration. The introduction of excess Tm₂O₃ in BaTiO₃ suppressed the grain growth and BaTiO₃ ceramics showed higher temperature stability due to the stable tetragonal structure and the small grain size with the increase of Tm₂O₃ concentration.     

Phase transition, structural and electrical properties of Pb(Zn1/3Nb2/3)O3-doped Pb(Ni1/3Nb2/3)O3-PbTiO3 ceramics prepared by solid-state reaction method

Phase pure perovskite (1−x−y)Pb(Ni_1/3Nb_2/3)O₃-xPb(Zn_1/3Nb_2/3)O₃-yPbTiO₃ (PNN-PZN-PT) ferroelectric ceramics were prepared by conventional solid-state reaction method via a B-site oxide mixing route. The PNN-PZN-PT ceramics sintered at the optimized condition of 1185 °C for 2 h exhibit high relative density and rather homogenous microstructure. With the increase of PbTiO₃ (PT) content, crystal structure and electrical properties of the synthesized PNN-PZN-PT ceramics exhibit successive phase transformation. A morphotropic phase boundary (MPB) is supposed to form in (0.9−x)PNN-0.1PZN-xPT at a region of x=32-36 mol% confirmed by X-ray diffraction (XRD) measurement and dielectric measurement. The MPB composition can be pictured as providing a “bridge” connecting rhombohedral ferroelectric (FE) phase and tetragonal one since crystal structure of the MPB composition is similar to both the rhombohedral and tetragonal lattices. Dielectric response of the sintered PNN-PZN-PT ceramics also exhibits successive phase-transition character. 0.64PNN-0.1PZN-0.26PT exhibits broad, diffused and frequency dependent dielectric peaks indicating a character of diffused FE-paraelectric (PE) phase transition of relaxor ferroelectrics and 0.40PNN-0.1PZN-0.50PT exhibits narrow, sharp and frequency independent dielectric peaks indicating a character of first-order FE-PE phase transition of normal ferroelectrics. The FE-PE phase transition of 0.56PNN-0.1PZN-0.34PT is nearly first-order with some diffused character, which also exhibits the largest value of piezoelectric constant d₃₃ of 462pC/N.     

Effect of BiFeO3 addition on Bi2O3–ZnO–Nb2O5 based ceramics

In this paper, low temperature sintering of the Bi₂(Zn_1/3Nb_2/3)₂O₇ (β-BZN) dielectric ceramics was studied with the use of BiFeO₃ as a sintering aid. The effects of BiFeO₃ contents and the sintering temperature on the phase structure, density and dielectric properties were investigated. The results showed that the sintering temperature could be decreased and the dielectric properties could be retained by the addition of BiFeO₃. The structure of BiFeO₃ doped β-BZN was still the monoclinic pyrochlore phase. The sintering temperature of BiFeO₃ doped β-BZN ceramics was reduced from 1000 °C to 920 °C. In the case of 0.15 wt.% BiFeO₃ addition, the β-BZN ceramics sintered at 920 °C exhibited good dielectric properties, which were listed as follows: ε_r = 79 and tan δ = 0.00086 at a frequency of 1 MHz. The obtained properties make this composition to be a good candidate for the LTCC application.     

Ferroelectric properties of Pr6O11-doped Bi4Ti3O12

Praseodymium doped Bi₄Ti₃O₁₂ (BIT) ceramics with composition Bi_2.9Pr_0.9Ti₃O₁₂ (BPT) were prepared by solid state reaction. These samples have polycrystalline Bi-layered perovskite structure without preferred orientation, and consist of well-developed plate-like grains with random orientation. Pr doping into BIT causes a large shift of the Curie temperature (T_C) of the BIT from 675 to 398 °C. At an electric field of 87 kV/cm, the remanent polarization and the coercive field of the BPT ceramics are 30 μC/cm² and 52 kV/cm, respectively. Furthermore, the dielectric permittivity and the dissipation factor of the BPT ceramics are 300 and 0.003 at 1 MHz, 1 V, and room temperature. Ferroelectric properties of the BPT ceramics are superior to V-doped Bi₄Ti₃O₁₂ (∼20 μC/cm² and 80 kV/cm) and (Sr, Ta)-doped Bi₄Ti₃O₁₂ (∼12 μC/cm² and 71 kV/cm) ceramics. In addition, the dense ceramics of praseodymium-doped B₄Ti₃O₁₂ were obtained by sintering at 1100 °C, about 100-200 °C lower than those of the SrBi₂Ta₂O₉ system.     

La2O3对Yb:Y2O3透明陶瓷光谱性能的影响

研究了La₂O₃对Yb：Y₂O₃透明陶瓷光谱性能的影响，添加适量La₂O₃以后，Yb：Y₂O₃透明陶瓷的吸收峰和发射峰的位置不变，但由于La³⁺的离子半径大于Y³⁺的离子半径，在Y₂O₃中引入La³⁺离子后，导致Y₂O₃晶格常数变大，晶场强度变弱，同时降低了Y₂O₃晶体的有序度，致使发射峰强度有所下降，发射截面变小.过量的La₂O₃（x=0.16）造成Yb³⁺激活离子发射强度明显下降；其荧光寿命在添加La₂O₃后总体增大45%—60%. 关键词： 氧化镧 氧化钇 透明陶瓷 光谱性能     

Study of (Bi2O3)(BaxMo1−xO3) polycrystalline ceramic as relaxor ferroelectric

Solid solutions of bismuth layered (Bi₂O₃)(Ba_xMo_1−xO₃) (0.2≤x≤0.8, x is in step of 0.2) ceramics were prepared by conventional solid-state reaction of the constitutive oxides at optimized temperatures with a view to study its electrical properties. Powder X-ray diffraction has been employed for physical characterization and an average grain size of ∼16 to 22 nm was obtained. XRD study reveals the single phase structure of the samples. Dielectric properties such as dielectric constant (ε′), dielectric loss (tanδ) and ac electrical conductivity (σ_ac) of the prepared ceramics sintered at various temperatures in the frequency range 10¹–10⁷ Hz have been studied. A strong dispersion observed in the dielectric properties shows the relaxor type behavior of the ceramic. The presence of maxima in the dielectric permittivity spectra indicates the ferroelectric behavior of the samples. Impedance plots (Cole–Cole plots) at different frequencies and temperatures were used to analyze the electric behavior. The value of grain resistance increases with the increase in Ba ion concentration. The conductivity mechanism shows a frequency dependence, which can be ascribed to the space charge mainly due to the oxygen vacancies. The relaxation observed for the M″ (ω) or Z″ (ω) curves is correlated to both localized and long range conduction. A single ‘master curve’ for the normalized plots of all the modulus isotherms observed for a given composition indicates that the conductivity relaxation is temperature independent.     

Sr位Nd掺杂对SrBi$lt;sub$gt;2$lt;/sub$gt;Nb$lt;sub$gt;2$lt;/sub$gt;O$lt;sub$gt;9$lt;/sub$gt;性能的影响及机理研究

采用传统固相法制备了（Sr_1-3x/2A_x/2Nd_x）Bi₂Nb₂O₉（x=0,0.05,0.1和0.2）陶瓷,并系统研究了Nd离子取代Sr离子对SrBi₂Nb₂O₉性能的影响及其作用机理.研究结果表明：Sr_1-3x/2A_x/2Nd_xBi₂Nb₂O₉的介电常数和介电损耗随温度变化的行为具有明显的离子松弛极化特征.Nd³⁺对Sr²⁺的部分取代,导致Sr_1-3x/2A_x/2Nd_xBi₂Nb₂O₉剩余极化强度P_r稍有下降,但其压电系数d₃₃却有所增加,根据铁电热力学理论,这是Nd³⁺对Sr²⁺取代导致材料介电常数增大所致.Sr_1-3x/2A_x/2Nd_xBi₂Nb₂O₉的居里温度（T_C）没有随Nd含量的增加而变化,拉曼光谱技术分析表明这是其NbO₆八面体畸变程度没有发生变化所致.Nd³⁺取代Sr²⁺提高了材料的介电常数ε_r、压电系数d₃₃、机电耦合系数K_p,同时降低了机械品质因数Q_m,但是谐振频率温度系数C值没有改变. 关键词： 压电陶瓷 介电性能 压电性能 拉曼光谱     

Dielectric and impedance measurements on (1−x)Ba(Fe1/2Ta1/2)O3-xBa(Zn1/3Ta2/3)O3 ceramics

In this work, ((1−x)Ba(Fe_1/2Ta_1/2)O₃-xBa(Zn_1/3Ta_2/3)O₃), ((1−x)BFT-xBZT) ceramics with x = 0.00–0.12 were synthesized by the solid–state reaction method. X-ray diffraction data revealed that both the powders and ceramics were of a pure-phase cubic perovskite structure. All ceramics showed large dielectric constants. For the x = 0.12 sample, a very high dielectric constant (>20,600) was observed. A lowering in the dielectric loss compared to pure BFT ceramics was observed with the BZT addition. The impedance measurements indicated that BZT has a strong effect on the bulk grain and grain boundary resistance of BFT ceramics. These results are in agreement with the measured dielectric properties. Based on dielectric and impedance results, (1−x)BFT-xBZT ceramics could be of great interest for high performance dielectric materials applications due their giant dielectric constant behavior.     

Synthesis and characterizations of Ho2O3 modified SrBi2Nb2O9 ceramics

SrBi_2-xHo_xNb₂O₉ (0?≤?x?≤?0.5) ceramics were prepared through the conventional solid state route. The materials have been characterized by XRD, FTIR and SEM. All compounds were pure and well crystallized. In FTIR spectroscopy, the spectral patterns of the crystal structures of these polyphases are unique and smoothly different from each other. The grains were prone to become spherical with increasing x. Dielectric and electrical properties of these materials as a function of temperature at different frequencies have been carried out. The dielectric constant and dielectric loss were found to decrease with an increase of the holmium concentration at room temperature. Reaching up to x?=?0.4 and x?=?0.5, the diffusivity increases, leading to the occurrence of relaxor behavior. 20–30 at.% Ho doping on the Bi-site can fill up the oxygen vacancies and decrease the AC conductivity. However, at higher doping levels greater than 40% holmium oxide, the AC conductivity is found to increase.     

Electric field effects on the dielectric and acoustic anomalies of Pb[(Mg1/3Nb2/3)0.83Ti0.17]O3 single crystals studied by dielectric and Brillouin spectroscopies

The effect of the electric field on the dielectric and acoustic properties of Pb[(Mg_1/3Nb_2/3)_0.83Ti_0.17]O₃ single crystals was investigated as functions of temperature and the electric field strength. The dielectric constant and the acoustic mode behaviors exhibited typical relaxor behaviors when there was no bias field. The longitudinal acoustic mode showed splitting under a moderate electric field of 1 kV/cm applied along the [001] direction, indicating coexistence of macroscopic/mesoscopic ferroelectric states and relaxor states. Further increase in the electric field up to 2 kV/cm induced a clear ferroelectric phase transition, which became smeared out due to the proximity of the electric field to the critical point. The electric field-temperature phase diagram of Pb[(Mg_1/3Nb_2/3)_0.83Ti_0.17]O₃ was suggested based on the observed field-induced changes in the dielectric and the acoustic properties.     

Ferroelectric-relaxor behavior of (Na0.5K0.5)NbO3-based ceramics

We report that ferroelectric-relaxor behavior is induced by doping of SrO and TiO₂, or BaO and TiO₂ into classic ferroelectric (Na_0.5K_0.5)NbO₃. It is found that [(Na_0.5K_0.5)_0.9Sr_0.1](Nb_0.9Ti_0.1)O₃ ceramics exhibit a pronounced ferroelectric-relaxor behavior, comparable to that of [(Na_0.5K_0.5)_0.9Ba_0.1](Nb_0.9Ti_0.1)O₃ ceramics. Our results indicate that the relaxor behavior is closely related to the appearance of micropolar regions in these systems. The relaxor behavior should arise from the dynamic response of micropolar clusters. Raman spectra of [(Na_0.5K_0.5)_1−xSr_x](Nb_1−xTi_x)O₃ ceramics measured in the wavenumber range from 100 to 1200 cm⁻¹ confirm that the first order scattering is dominant in phonon bands should result from both short-range ordered region (micropolar regions) and disordered matrix. The frequency dependence of dielectric permittivity measurements show that the relaxor behavior of SrO and TiO₂, or BaO and TiO₂ doped (Na_0.5K_0.5)NbO₃ ceramics is not a Debye type in the radio frequency range.     

Dielectric and piezoelectric properties of Fe2O3-doped (Na0.5K0.5)0.96Li0.04Nb0.86Ta0.1Sb0.04O3 lead-free ceramics

The effect of a small amount Fe₂O₃ (0.1-2 mol%) doping on the electrical properties of (Na_0.5K_0.5)_0.96Li_0.04Nb_0.86Ta_0.1Sb_0.04O₃ (NKLNTS) ceramics was investigated. It was found that the B-site substitution of Fe³⁺ does not change the crystal structure within the studied doping level and all modified ceramics have a pure tetragonal perovskite structure at room temperature. The addition of Fe₂O₃ can promote the sintering of NKLNTS ceramics, and simultaneously cause the grain growth so that Fe³⁺-doped NKLNTS compositions show degraded densification at higher doping level. Furthermore, the dielectric properties of the NKLNTS ceramics do not show a significant change by Fe₂O₃ doping. However, the addition of Fe₂O₃ was found to have a significant influence on the electric fatigue resistance and the durability against water. The presence of oxygen vacancies caused by the replacement of Fe³⁺ for B-site ions makes the NKLNTS ceramics harder.     

非化学计量和掺杂对(Na1/2Bi1/2)0.92Ba0.08TiO3陶瓷电性能的影响

研究了非化学计量和掺杂对无铅压电陶瓷(Na_1/2Bi_1/2)_0.92Ba_0.08TiO₃的压电性能及去极化温度的影响.研究发现A位非化学计量可以提高陶瓷的压电性能;B位掺杂对材料电学性能的影响规律类似于Pb(Ti,Zr)O₃系压电陶瓷的相关规律;由于非化学计量和掺杂会影响到A位离子对B位离子与氧离子形成的BO₆八面体的耦合作用,影响到畴的稳定性,从而影响 关键词： 无铅压电陶瓷 非化学计量 掺杂 电性能     

ZnO-Bi2O3-Sb2O3-BaO系陶瓷的晶界相与抗退降性能

在通常的ＺｎＯ－Ｂｉ₂Ｏ₃－Ｓｂ₂Ｏ₃系电压敏陶瓷中，加入能构成压敏特性的钡添加剂，发现除已知的Ｂｉ₂Ｏ₃和Ｚｎ_2．３３Ｓｂ_０．６７Ｏ₄晶界相以外，还出现新的晶界相，分析表明是固溶有微量其它成分的偏锑酸钡（ＢａＳｂ₂Ｏ₆）晶相。同时还发现，ＢａＳｂ_{2关键词：}     

Study of PbO-SrO-TiO2-B2O3 glass and glass ceramics

The glasses with composition (50−X)PbO–XSrO-25TiO₂-25B₂O₃ (where X=0, 5, 10 and 15 mol%) were prepared using conventional quenching technique. The T_g, T_c, density and CTE of the glass samples were measured. The T_g observed to increase with increasing concentration of SrO, while the T_c first decreased and then increased. The glass samples were converted to glass ceramics by following two stage heat treatment schedule. The glass ceramic samples were characterized by XRD, SEM and dielectric measurements. The XRD results revealed the formation of ferroelectric lead titanate as a major crystalline phase in glass ceramics. Additional phases observed include Sr₂B₂O₅ and PbB₂O₄. The room temperature (RT) dielectric constant of glass and glass ceramics are in the range of 100–120 which is promising for capacitor application.     

Dielectric properties of BiMg1/2Ti1/2O3 and BiMg1/2Zr1/2O3 perovskite ceramics with elimination of the contribution for direct current conductivity

A technique for analysis of the electric modulus spectrum of dielectric ceramics based on the elimination of the direct current conductivity (σ _dc ) contribution has been developed. Expressions are given for the real (M′ _ac ) and imaginary (M′′ _ac ) parts of the complex electrical modulus related only to the dielectric polarization and not containing the contribution of σ _dc . The frequency dependence of M′′ _ac and the M′′ _ac – M′ _ac diagram for BiMg_1/2Ti_1/2O₃ and BiMg_1/2Zr_1/2O₃ perovskite ceramics are analyzed.     

Spectroscopic characterization of Yb:Sc2O3 transparent ceramics

Yb：Sc2O3 transparent ceramics are fabricated by a conventional ceramic process and sintering in H2 atmosphere. The room-temperature spectroscopic properties are investigated, and the Raman spectrum shows an obvious vibration characteristic band centred at 415 cm-1. There are three broad absorption bands around 891, 937, and 971 nm, respectively. The strongest emission peak is centred at 1.04 μm with a broad bandwidth （11 nm） and an emission cross-section of 1.8×10^-20 cm^2. The gain coefficient implies a possible laser ability in a range from 990 nm to 1425 nm. The energy-level structure shows that Yb：Sc2O3 ceramics have large Stark splitting at the ground state level due to their strong crystal field. All the results show that Yb：Sc2O3 transparent ceramics are a promising material for short pulse lasers.     

Magnetism and thermal induced characteristics of Fe2O3 content bioceramics

Magnetic properties of Li₂O–MnO₂–CaO–P₂O₅–SiO₂ (LMCPS) glasses doped with various amounts of Fe₂O₃ were investigated. There is a dramatic change in the magnetic property of pristine LMCPS after the addition of Fe₂O₃ and crystallized at 850 °C for 4 h. Both the electron paramagnetic resonance and magnetic susceptibility measurements showed that the glass ceramic with 4 at% Fe₂O₃ exhibited the coexistence of superparamagnetism and ferromagnetism at room temperature. When the Fe₂O₃ content was higher than 8 at%, the LMCPS glasses showed ferromagnetism behavior. The complex magnetic behavior is due to the distribution of (Li, Mn)ferrite particle sizes driven by the Fe₂O₃ content. The thermal induced hysteresis loss of the crystallized LMCPS glass ceramics was characterized under an alternating magnetic field. The energy dissipations of the crystallized LMCPS glass ceramics were determined by the concentration and Mn/Fe ratios of Li(Mn, Fe)ferrite phase formed in the glass ceramics.     

Cr3+:Al2O3透明多晶陶瓷光谱特性分析

对透光性良好的Cr³⁺:Al₂O₃透明多晶陶瓷的光谱性能 进行了研究，其吸收光谱中吸收峰与单晶红宝石相一致，按吸收光谱和Tanabe-Sugano能级 图，算出其晶场强度参数D_q及Racah参数B分别为1792cm^-1， 689cm ^-1，D_q/B=2.6，陶瓷中Cr³⁺离子所处格位的晶体场强 比单晶弱一些，但Cr³⁺:Al₂O₃透明陶瓷仍属于强场晶 体材料；当Cr³⁺掺杂浓度到达0.8wt%时，陶瓷的发射谱仍保持较好的R线发射 ；随Cr³⁺掺杂浓度的增大，激发峰位发生“红移”.在Cr³⁺:Al₂O₃透明多晶陶瓷的荧光谱上，发现一个波长为670nm的发射峰，经激发 谱确认为Cr³⁺的发射峰. 关键词： 氧化铝 透明陶瓷 离子格位 光谱性质