Structural Diversity of Copper(I)–N‐Heterocyclic Carbene Complexes; Ligand Tuning Facilitates Isolation of the First Structurally Characterised Copper(I)–NHC Containing a Copper(I)–Alkene Interaction

The preparation of a series of imidazolium salts bearing N‐allyl substituents, and a range of substituents on the second nitrogen atom that have varying electronic and steric properties, is reported. The ligands have been coordinated to a copper(I) centre and the resulting copper(I)–NHC (NHC=N‐heterocyclic carbene) complexes have been thoroughly examined, both in solution and in the solid‐state. The solid‐state structures are highly diverse and exhibit a range of unusual geometries and cuprophilic interactions. The first structurally characterised copper(I)–NHC complex containing a copper(I)–alkene interaction is reported. An N‐pyridyl substituent, which forms a dative bond with the copper(I) centre, stabilises an interaction between the metal centre and the allyl substituent of a neighbouring ligand, to form a 1D coordination polymer. The stabilisation is attributed to the pyridyl substituent increasing the electron density at the copper(I) centre, and thus enhancing the metal(d)‐to‐alkene(π*) back‐bonding. In addition, components other than charge transfer appear to have a role in copper(I)–alkene stabilisation because further increases in the Lewis basicity of the ligand disfavours copper(I)–alkene binding.     

New N,N,N-heteroscorpionates based on 2,2'-bis(pyrazolyl)ethanamine and its derivatives. Ligands designed for probing supramolecular interactions

The successful design and synthesis of the new bis(pyrazolyl)ethanamine ligand and its copper(I) triphenylphosphine complex is reported. The ligand coordinates to the copper(I) center in a fac tridentate fashion, through both the pyrazolyl rings and the nitrogen atom from the NH2 group. In the solid state, the compound is organized in a 2D noncovalent network by N-H...pi and C-H...pi interactions and hydrogen bonds. The analogous ligand with a benzyl group substituted on the amine forms a complex with the same copper(I) center that has a similar 2D supramolecular structure and, in addition, is organized by the benzyl synthon into a 3D architecture.     

Synthesis of a new chiral nonracemic C(2)-symmetric 2,2'-bipyridyl ligand and its application in copper(I)-catalyzed enantioselective cyclopropanation reactions

An efficient synthesis of a low molecular weight, chiral nonracemic and C(2)-symmetric bipyridyl ligand is reported. The ligand was prepared using a catalytic asymmetric dihydroxylation reaction of a pyrindine as a key step. The ligand was evaluated in the asymmetric copper(I)-catalyzed cyclopropanation reactions of a series of alkenes and diazoesters. Very high diastereoselectivities and enantioselectivities were observed (>95:5 dr and up to 99% ee). These are the highest reported stereoselectivities for a chiral bipyridyl ligand. [structure: see text]     

"Twisted" scorpionates: synthesis of a tris(2-pyridonyl)borate (Thp) ligand; lessons in the requirements for successful B(L2D)3 type ligands

The synthesis of a new charge-neutral zwitterionic tripodal borate ligand based on 2-hydroxypyridine is reported. (Dimethylaminopyridinium)tris(2-pyridonyl)borate, (DMAP)Thp, has been complexed to copper(I) chloride to give a pseudo-C(3) symmetric complex. The propensity for this ligand and other flexible scorpionates to exhibit such helical chirality upon complexation is discussed.     

Coordination polymers of copper(I) halides and neutral heterocyclic thiones with new coordination modes

Reaction of copper(I) chloride or bromide with equimolar amounts of the neutral pyrimidine-2-thione ligand (pymtH) afforded linear chain polymers [Cu(pymtH)X]n (X = Cl, Br) with the pymtH ligand acting as a bridging N, S donor. In contrast, copper(I) iodide under the same conditions gave the dimeric complex [Cu(pymtH)2I]2 with the pymtH ligand adopting monodentate coordination mode through the exocyclic sulfur atom in terminal and bridging modes. Reactions of the heterocyclic thione ligand 2,4,6-trimercaptotriazine (H3TMT) with copper(I) halides afforded novel three-dimensional polymers, which crystallized in the cubic space group Pa. Each copper(I) ion is coordinated by three S atoms of three distinct H3TMT ligands, and each H3TMT acts as a tridentate bridging ligand linking three copper(I) ions through its sulfur atoms, thus forming two independent three-dimensional (3D) networks. The network belongs to a three-connected (10, 3)-a topology, which is enantiometric and interpenetrating. In all complexes the ligands are present in the thione form, and all halides are terminally coordinated to copper(I) ions. The photoluminescent and thermal properties of the complexes have also been investigated.     

Ligand to ligand charge transfer in (hydrotris(pyrazolyl)borato)(triphenylarsine)copper(I)

Emission and UV-vis absorption spectra of (hydrotris(pyrazolyl)borato)(triphenylarsine)copper(I), (CuTpAsPh3), (hydrotris(pyrazolyl)borato)(triethylamine)copper(I), (CuTpNEt3), and (hydrotris(pyrazolyl)borato)(triphenylphosphine)copper(I), (CuTpPPh3), are reported. The spectra of the arsine complex contain low-energy bands (with a band maximum at 16,500 cm(-1) in emission and a weak shoulder centered at about 25,000 cm(-1) in absorption) that are not present in the corresponding spectra of the amine or phosphine complexes. The lowest energy electronic transition is assigned to ligand to ligand charge transfer (LLCT) with some contribution from the metal. This assignment is consistent with PM3(tm) molecular orbital calculations that show the HOMO to consist primarily of pi orbitals on the Tp ligand (with some metal orbital character) and the LUMO to be primarily antibonding orbitals on the AsPh3 ligand (also with some metal orbital character). The absorption shoulder shows a strong negative solvatochromism, indicative of a reversal or rotation of electric dipole upon excitation, and consistent with a LLCT. The trends in the energies of the electronic transitions and the role of the metal on the LLCT are discussed.     

Effect of a tridentate ligand on the structure, electronic structure, and reactivity of the copper(I) nitrite complex: role of the conserved three-histidine ligand environment of the type-2 copper site in copper-containing nitrite reductases

It is postulated that the copper(I) nitrite complex is a key reaction intermediate of copper containing nitrite reductases (Cu-NiRs), which catalyze the reduction of nitrite to nitric oxide (NO) gas in bacterial denitrification. To investigate the structure-function relationship of Cu-NiR, we prepared five new copper(I) nitrite complexes with sterically hindered tris(4-imidazolyl)carbinols [Et-TIC = tris(1-methyl-2-ethyl-4-imidazolyl)carbinol and iPr-TIC = tris(1-methyl-2-isopropyl-4-imidazolyl)carbinol] or tris(1-pyrazolyl)methanes [Me-TPM = tris(3,5-dimethyl-1-pyrazolyl)methane; Et-TPM = tris(3,5-diethyl-1-pyrazolyl)methane; and iPr-TPM = tris(3,5-diisopropyl-1-pyrazolyl)methane]. The X-ray crystal structures of all of these copper(I) nitrite complexes were mononuclear eta(1)-N-bound nitrite complexes with a distorted tetrahedral geometry. The electronic structures of the complexes were investigated by absorption, magnetic circular dichroism (MCD), NMR, and vibrational spectroscopy. All of these complexes are good functional models of Cu-NiR that form NO and copper(II) acetate complexes well from reactions with acetic acid under anaerobic conditions. A comparison of the reactivity of these complexes, including previously reported (iPr-TACN)Cu(NO2) [iPr-TACN = 1,4,7-triisopropyl-1,4,7-triazacyclononane], clearly shows the drastic effects of the tridentate ligand on Cu-NiR activity. The copper(I) nitrite complex with the Et-TIC ligand, which is similar to the highly conserved three-histidine ((His)3) ligand environment in the catalytic site of Cu-NiR, had the highest Cu-NiR activity. This result suggests that the (His)3 ligand environment is essential for acceleration of the Cu-NiR reaction. The highest Cu-NiR activity for the Et-TIC complex can be explained by the structural and spectroscopic characterizations and the molecular orbital calculations presented in this paper. Based on these results, the functional role of the (His)3 ligand environment in Cu-NiR is discussed.     

63Cu NMR spectroscopy of copper(I) complexes with various tridentate ligands: CO as a useful 63Cu NMR probe for sharpening 63Cu NMR signals and analyzing the electronic donor effect of a ligand

63Cu NMR spectroscopic studies of copper(I) complexes with various N-donor tridentate ligands are reported. As has been previously reported for most copper(I) complexes, 63Cu NMR signals, when acetonitrile is coordinated to copper(I) complexes of these tridentate ligands, are broad or undetectable. However, when CO is bound to tridentate copper(I) complexes, the 63Cu NMR signals become much sharper and show a large downfield shift compared to those for the corresponding acetonitrile complexes. Temperature dependence of 63Cu NMR signals for these copper(I) complexes show that a quadrupole relaxation process is much more significant to their 63Cu NMR line widths than a ligand exchange process. Therefore, an electronic effect of the copper bound CO makes the 63Cu NMR signal sharp and easily detected. The large downfield shift for the copper(I) carbonyl complex can be explained by a paramagnetic shielding effect induced by the copper bound CO, which amplifies small structural and electronic changes that occur around the copper ion to be easily detected in their 63Cu NMR shifts. This is evidenced by the correlation between the 63Cu NMR shifts for the copper(I) carbonyl complexes and their nu(C[triple bond]O) values. Furthermore, the 63Cu NMR shifts for copper(I) carbonyl complexes with imino-type tridentate ligands show a different correlation line with those for amino-type tridentate ligands. On the other hand, 13C NMR shifts for the copper bound 13CO for these copper(I) carbonyl complexes do not correlate with the nu(C[triple bond]O) values. The X-ray crystal structures of these copper(I) carbonyl complexes do not show any evidence of a significant structural change around the Cu-CO moiety. The findings herein indicate that CO complexation makes 63Cu NMR spectroscopy much more useful for Cu(I) chemistry.     

Spectroelectrochemical and computational studies on the mechanism of hypoxia selectivity of copper radiopharmaceuticals

Detailed chemical, spectroelectrochemical and computational studies have been used to investigate the mechanism of hypoxia selectivity of a range of copper radiopharmaceuticals. A revised mechanism involving a delicate balance between cellular uptake, intracellular reduction, reoxidation, protonation and ligand dissociation is proposed. This mechanism accounts for observed differences in the reported cellular uptake and washout of related copper bis(thiosemicarbazonato) complexes. Three copper and zinc complexes have been characterised by X-ray crystallography and the redox chemistry of a series of copper complexes has been investigated by using electronic absorption and EPR spectroelectrochemistry. Time-dependent density functional theory (TD-DFT) calculations have also been used to probe the electronic structures of intermediate species and assign the electronic absorption spectra. DFT calculations also show that one-electron oxidation is ligand-based, leading to the formation of cationic triplet species. In the absence of protons, metal-centred one-electron reduction gives the reduced anionic copper(I) species, [CuIATSM](-), and for the first time it is shown that molecular oxygen can reoxidise this anion to give the neutral, lipophilic parent complexes, which can wash out of cells. The electrochemistry is pH dependent and in the presence of stronger acids both chemical and electrochemical reduction leads to quantitative and rapid dissociation of copper(I) ions from the mono- or diprotonated complexes, [CuIATSMH] and [Cu(I)ATSMH2]+. In addition, a range of protonated intermediate species have been identified at lower acid concentrations. The one-electron reduction potential, rate of reoxidation of the copper(I) anionic species and ease of protonation are dependent on the structure of the ligand, which also governs their observed behaviour in vivo.     

Kinetics of the dissolution of copper metal in aqueous solutions containing unsaturated organic ligands and copper(II)

The kinetics of the dissolution of copper metal in an aqueous solution containing copper(II) and an unsaturated organic ligand was followed by using an automated flow-injection analysis technique to determine the concentration of copper(I) in solution as a function of time. The results suggest that the rate of dissolution of the copper metal is dependent on electron transfer between the copper(II) and copper atoms on the surface of the copper metal, and on the stabilization of copper(I) by the unsaturated organic ligand in solution.     

Dimethyl 2,2′‐bipyridine‐6,6′‐dicarboxylate and bis(dimethyl 2,2′‐bipyridine‐6,6′‐dicarboxylato‐κ2N,N′)copper(I) tetrafluoroborate

The single‐crystal X‐ray structures of dimethyl 2,2′‐bipyridine‐6,6′‐dicarboxylate, C₁₄H₁₂N₂O₄, and the copper(I) coordination complex bis(dimethyl 2,2′‐bipyridine‐6,6′‐dicarboxylato‐κ²N,N′)copper(I) tetrafluoroborate, [Cu(C₁₄H₁₂N₂O₄)₂]BF₄, are reported. The uncoordinated ligand crystallizes across an inversion centre and adopts the anticipated anti pyridyl arrangement with coplanar pyridyl rings. In contrast, upon coordination of copper(I), the ligand adopts an arrangement of pyridyl donors facilitating chelating metal coordination and an increased inter‐pyridyl twisting within each ligand. The distortion of each ligand contrasts with comparable copper(I) complexes of unfunctionalized 2,2′‐bipyridine.     

Spectrophotometric investigation of the reaction of CU(II) and Cu(I) with 1-isonitroso-(1,2,3,4)-tetrahydrophenazine

The reactions of Cu(II) and Cu(I) with 1-isonitroso-(1,2,3,4)-tetrahydrophenazine (HITF) have been studied spectrophotometrically. Both ions form complexes with metal/ligand ratio 1:2. The complex of Cu(I) and ITF can be used for copper determination in the range 2-50 x 10(-6)M, and has been separated as the perchlorate in crystalline form. The spectrophotometric characteristics and the equilibrium constants for the ligand and for the complexes are reported.     

Endogenous arene hydroxylation promoted by copper(I) cluster helicates

A novel neutral triple-stranded hexanuclear copper(I) cluster helicate [Cu(I)(6)L(3)]·2CH(3)CN derived from a thiosemicarbazone ligand could be synthesized and crystallographically characterized. The MALDI mass spectrum of this complex suggests that the tetranuclear copper(I) cluster helicate [Cu(I)(4)L(2)] is also present in solution. These copper(I) cluster helicates are capable, in the presence of O(2), of hydroxylating the arene linker of their supporting ligand strands. The resulting dinuclear complex [Cu(II)(2)L'(OH)] is formed by two copper(II) centers, a new ligand arising from the hydroxylation reaction, and one hydroxide group. The magnetic investigation of this compound shows a strong antiferromagnetic coupling between the two Cu(II) centers. The kinetic studies for the hydroxylation process show values of ΔH(≠)=-70 kJ mol(-1), similar to those mediated by the tyrosinase enzymes.     

Luminescent Coordination Polymers Constructed from a Flexible,Tetradentate Diisopyrazole Ligand and Copper(I) Halides

One‐ and two‐dimensional coordination polymers composed of a structurally flexible, tetradentate diisopyrazole ligand and copper(I) halides were synthesized as crystalline solids. Complexation with copper(I) chloride or bromide resulted in the formation of infinite coordination chains through connecting each diisopyrazole ligand with two copper(I) ions in a trigonal planar coordination geometry. Contrarily, the combination of a diisopyrazole ligand and copper(I) iodide gave a two‐dimensional coordination network comprising Cu₄I₄ units with stair‐step type geometry and diisopyrazoles that acted as both tetradentate and bidentate bridging ligands. All the coordination polymers exhibited visible photo‐emission upon UV irradiation, and the Cu₄I₄ complex showed thermochromic behavior.     

Carbon-halogen bond activation mechanism by copper(I) complexes of (2-pyridyl)alkylamine ligands

The reaction of p-substituted benzyl halides ((Y)BnX; X = Cl, Br, and I; Y = p-substituent, OMe, t-Bu, Me, H, F, Cl, and NO(2)) and copper(I) complexes supported by a series of (2-pyridyl)alkylamine ligands has been investigated to shed light on the mechanism of copper(I) complex mediated carbon-halogen bond activation, including ligand effects on the redox reactivity of copper(I) complexes which are relevant to the chemistry. For both the tridentate ligand (Phe)L(Pym2) [N,N-bis(2-pyridylmethyl)-2-phenylethylamine] and tetradentate ligand TMPA [tris(2-pyridylmethyl)amine] complexes, the C-C coupling reaction of benzyl halides proceeded smoothly to give corresponding 1,2-diphenylethane derivatives and copper(II)-halide complex products. Kinetic analysis revealed that the reaction obeys second-order kinetics both on the copper complex and the substrate; rate = k[Cu](2)[(Y)BnX](2). A reaction mechanism involving a dinuclear copper(III)-halide organometallic intermediate is proposed, on the basis of the kinetic results, including observed electronic effects of p-substituents (Hammett plot) and the rate dependence on the BDE (bond dissociation energy) of the C-X bond, as well as the ligand effects.     

Redox-adaptable copper hosts. Pyridazine-linked cryptands accommodate copper in a range of redox States

A series of structurally characterized copper complexes of two pyridazine-spaced cryptands in redox states + (I,I), (II,I), (II), (II,II) are reported. The hexaimine cryptand L(I) [formed by the 2 + 3 condensation of 3,6-diformylpyridazine with tris(2-aminoethyl)amine (tren)] is able to accommodate two non-stereochemically demanding copper(I) ions, resulting in [Cu(I)(2)L(I)](BF(4))(2) 1, or one stereochemically demanding copper(II) ion, resulting in [Cu(II)L(I)()](BF(4))(2) 3. Complex 3 crystallizes in two forms, 3a and 3b, with differing copper(II) ion coordination geometries. Addition of copper(I) to the monometallic complex 3 results in the mixed-valence complex [Cu(I)Cu(II)L(I)](X)(3) (X = PF(6)(-), 2a; X = BF(4)(-), 2b) which is well stabilized within this cryptand as indicated by electrochemical studies (K(com) = 2.1 x 10(11)). The structurally characterized, octaamine cryptand L(A), prepared by sodium borohydride reduction of L(I), is more flexible than L(I) and can accommodate two stereochemically demanding copper(II) ions, generating the dicopper(II) cryptate [Cu(II)(2)L(A)](BF(4))(4) 4. Electrochemical studies indicate that L(A) stabilizes the copper(II) oxidation state more effectively than L(I); no copper redox state lower than II,II has been isolated in the solid state using this ligand.     

Copper(II/I) Complexes of a Hexakis(bipyridyl)cyclotriveratrylene Ligand: A Redox-Induced Conformational Switch

A series of copper(II) and copper(I) complexes have been synthesized with ligands combining 6-methyl-2,2'-bipyridines with cyclotriveratrylene (CTV) (1) and with catechol (2). The electrochemical, (1)H NMR, and mass spectrometry characterizations of these complexes are described and discussed. The six pendant bipyridines of ligand 1 allow for the formation of two trinuclear copper(I) complexes [(1)Cu(3)](BF(4))(3) differing only in the conformation "vic" or "int" adopted by the ligand to fit the tetrahedral cuprous ions. Similarly, 1 generates two trinuclear copper(II) complexes in which the conformation of the ligand fits the square planar geometry of cupric ions. In both the cuprous and cupric complexes, a conformational equilibrium exists. Ligand 2 bearing two methylbipyridines has proven to be a useful model of the coordinating sites of ligand 1. In this case, two homologous copper(I) complexes are obtained, [(2)Cu]BF(4) and [(2)(2)Cu(2)](BF(4))(2), modeling respectively two possible coordination conformations of ligand 1. With copper(II), ligand 2 yields only one complex [(2)Cu](CF(3)SO(3))(2), which allows for the unambiguous identification of the conformations observed for ligand 1 complexes. The different coordinating modes of ligand 1 in the complexes mentioned are in exchange but exhibit different physical properties, thus representing a new bistable system based on conformational isomerism which exhibits an electrochemical potential hysteresis. An equilibrium constant and thermodynamic data were obtained for this system by variable-temperature cyclic voltammetry. The influence of coordinating vs noncoordinating solvents was also studied.     

含混合配体双核铜（I）配合物的合成及荧光光谱

合成了含双二苯基膦甲烷（dppm)和邻菲咯啉（phen)混合配体的双核铜（I）配合物[Cu(dppm)(phen)]2(NO3)21,并经X射线单晶结构分析表征了配合物的结构，研究了配合物的荧光光谱特征，配合物1的结构分析表明，dppm作为桥式双齿配体、phen作为双齿配体分别与铜原子形成四面体配位结构，硝酸根离子位于配合物外界。     

Dioxygen reactivity of new bispidine-copper complexes

The reactivity of copper complexes of three different second-generation bispidine-based ligands (bispidine = 3,7-diazabicyclo[3.3.1]nonane; mono- and bis-tetradentate; exclusively tertiary amine donors) with dioxygen [(reversible) binding of dioxygen by copper(I)] is reported. The UV-vis, electrospray ionization mass spectrometry, electron paramagnetic resonance, and vibrational spectra (resonance Raman) of the dioxygen adducts indicate that, depending on the ligand and reaction conditions, several different species (mono- and dinuclear, superoxo, peroxo, and hydroperoxo), partially in equilibrium with each other, are formed. Minor changes in the ligand structure and/or experimental conditions (solvent, temperature, relative concentrations) allow switching between the different forms. With one of the ligands, an end-on peroxodicopper(II) complex and a mononuclear hydroperoxocopper(II) complex could be characterized. With another ligand, reversible dioxygen binding was observed, leading to a metastable superoxocopper(II) complex. The amount of dioxygen involved in the reversible binding to Cu(I) was determined quantitatively. The mechanism of dioxygen binding as well as the preference of each of the three ligands for a particular dioxygen adduct is discussed on the basis of a computational (density functional theory) analysis.     

Henry reaction catalyzed by copper(I) complexes of a new pyridine‐containing macrocyclic ligand

The synthesis and characterization of copper(I) complexes of the novel pyridine‐containing macrocyclic ligand (PC‐L) and their use as catalysts in the Henry reaction are reported. The pyridine‐based 12‐membered tetraaza macrocyclic (PC‐L) ligand 1 can be obtained in good overall yield (85%) from commercially available starting materials. The Cu(I) complexes showed good catalytic activities in the Henry reaction of different aldehydes and nitroalkanes. Remarkable diastereoselectivity was observed when isatine was reacted with nitroethane under catalytic conditions. Copyright © 2011 John Wiley & Sons, Ltd.