Rapid SPE-HPLC determination of the 16 European priority polycyclic aromatic hydrocarbons in olive oils

Polycyclic aromatic hydrocarbons (PAHs) are a large class of organic compounds. It has been established that the main source of exposure to these compounds for human beings is through food, particularly fats and oils, due to the lipophilic nature of these polycyclic compounds. The aim of this work was to optimise and validate a method involving SPE and HPLC for rapid determination of the 16 European Union (EU) priority PAHs (required by the Recommendation 2005/108/EC) in vegetable oils. Two spectrofluorometric detectors and a UV-Visible detector in series were used to identify and quantify the target compounds. Linearity, recoveries, LOD, and LOQ were found to be in agreement with the performance criteria for benzo[a]pyrene (BaP) analysis as required by the Commission Directive 2005/10/EC, and satisfactory for all the compounds of interest, except for cyclopenta[c,d]pyrene, which presented a very low signal in the UV. Optimised chromatographic conditions for the separation of 25 PAHs, comprising both EPA and EU priority PAHs plus benzo[e]pyrene and benzo[b]chrysene, have been also proposed.     

The development of solid-surface fluorescence characterization of polycyclic aromatic hydrocarbons for potential screening tests in environmental samples

This paper presents the characterization of polycyclic aromatic hydrocarbons (PAHs) in solid-surface fluorescence as the first step for obtaining new optical sensors for PAHs screening. The fluorescence properties of the EPA-PAHs (naphthalene, acenaphthene, acenaphthylene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, chrysene, benzo[a]anthracene, benzo[k]fluoranthene, benzo[b]fluoranthene, benzo[a]pyrene, indeno [1,2,3-cd]pyrene, benzo[g,h,i]perylene and dibenzo[a,h]anthracene) on five types of solid-surfaces were evaluated. The experimental variables (pH and percentage of organic solvent in samples) were studied, obtaining different possibilities for making individual sensors for some of these PAHs and the best conditions for developing sensors for PAH screening were also studied.     

Differentiation of isomeric polyaromatic hydrocarbons by electrospray Ag(I) cationization mass spectrometry

Abundant Ag(I)-cationized complexes of 13 polyaromatic hydrocarbons (PAHs), [Ag+PAH](+) and [Ag+2(PAH)](+), were readily generated by electrospray ionization (ESI). In-source collision-induced dissociation (CID) of the [Ag+2(PAH)](+) complex yielded the monomer complex [Ag+PAH](+), which fragmented further to yield the radical molecular ion [PAH](+.). Based on significant differences in relative intensities of [Ag+2(PAH)](+), [Ag+PAH](+) and [PAH](+.), isomeric PAHs can be differentiated. The [PAH](+.)/[Ag+PAH](+) ion intensity ratio was found to increase with decreasing ionization potentials (IPs) of PAHs. The ratio was significantly different for the isomeric PAHs studied over a wide range of PAH concentrations (1.6-100 nmol/mL), and showed good measurement reproducibility; the coefficient of variation of inter-day measurements was in the range 3-12% for four representative PAHs (n = 5). Detection limits for phenanthrene, pyrene, chrysene and benzo[a]pyrene, in the form of the monomer complexes [(107)Ag+PAH](+) and measured in the selected-ion monitoring (SIM) mode, were 0.31, 0.63, 0.16 and 1.25 pmol/5 microl injection, respectively (S/N ratio approximately 2-3).     

A New and Concise Synthesis of 3-Hydroxybenzo[c]phenanthrene and 12-Hydroxybenzo[g]chrysene, Useful Intermediates for the Synthesis of Fjord-Region Diol Epoxides of Benzo[c]phenanthrene and Benzo[g]chrysene

A new strategy which involves a palladium-catalyzed cross-coupling reaction has been developed for the rapid synthesis of 3-hydroxybenzo[c]phenanthrene (5) and 12-hydroxybenzo[g]chrysene (6). These phenolic compounds are the key intermediates for the synthesis of highly carcinogenic fjord-region diol epoxide metabolites 3 and 4 of benzo[c]phenanthrene (1) and benzo[g]chrysene (2). The cross-coupling reaction of 2-bromo-5-methoxybenzaldehyde (9) with naphthalene-1-boronic acid (7) and phenanthrene-9-boronic acid (8) produced 2-(1-naphthyl)-5-methoxybenzaldehyde (10) and 2-(9-phenanthryl)-5-methoxybenzaldehyde (11), respectively, in quantitative yields. After reaction of these aldehydes with trimethylsulfonium iodide under phase-transfer conditions or with the Wittig reagent obtained from (methoxymethyl)triphenylphosphonium bromide and phenyllithium to generate an oxiranyl or methoxyethene side chain, the acid-catalyzed cyclization with methanesulfonic acid (or boron trifluoride) produced 3-methoxybenzo[c]phenanthrene (16) and 12-methoxybenzo[g]chrysene (17) in 61-64% yields. Finally, demethylation of these methoxy derivatives 16 and 17 with boron tribromide resulted in the formation of the hydroxy analogues 5 and 6, respectively. The availability of this short and high-yielding regiospecific method for the synthesis of phenols 5 and 6 should allow the preparative-scale synthesis of the fjord-region diol epoxides 3 and 4. These diol epoxides are required as starting compounds for the synthesis of site-specifically modified oligonucleotides which are critically needed to elucidate the mechanism of carcinogenesis at the molecular level.     

Quantification of monohydroxy-PAH metabolites in urine by solid-phase extraction with isotope dilution-GC–MS

For measurement of biomarkers from polycyclic aromatic hydrocarbon (PAH) exposure, an analytical method is described quantifying hydroxylated PAH (OH-PAH) in urine samples. This method determined monohydroxy metabolites of naphthalene, fluorene, phenanthrene, fluoranthene, pyrene, chrysene, benzo[c]phenanthrene, and benz[a]anthracene. The sample preparation consisted of enzymatic hydrolysis, solid-phase extraction and derivatization with a silylating reagent. Five carbon-13 labeled standards were used for isotope dilution. Analytes were separated by gas chromatography (GC) and quantified with high-resolution mass spectrometry (HRMS). This method produced good recoveries (41-70%), linearity, and specificity. Data were corrected for blank levels from the naphthalene, fluorene, and phenanthrene metabolites. Method detection limits ranged from 2 ng L(-1) for 1-hydroxypyrene to 43.5 ng L(-1) for 1-hydroxynaphthalene. Using quality control charts from two urine pools, the method can be readily applied to biomonitoring PAH exposure.     

Determination of Polycyclic Aromatic Hydrocarbons in Airborne Particulate by High Performance Liquid Chromatography

This paper presents a trisolvent ultrasonic extraction and HPLC analysis method for the determination of 11 polycyclic aromatic hydrocarbons in air particulate collected on an air filter by a commercial high volume air sampler. A reverse phase column, Vydac 201 TP, and a gradient mobile phase, acetonitrile/water, were used. The 11 PAHs, fluoranthene, pyrene, benz[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a, h]anthracene, benzo[ghi]perylene, indeno[1,2,3-cd]pyrene, and coronene were completely resolved under experimental conditions. All the PAHs except coronene were monitored by fluorescence with λ_ex=270 nm, λ_em>389 nm. Coronene was monitored by UV with λ=300 nm. The methodology was evaluated by spiking SRM 1649 with a PAH standard and then going through different extraction procedures and analyzing the PAH concentrations without clean-up. An external standard method was used for quantitation. The recovery yields for fluoranthene, benz[a]anthracene, benzo[a]pyrene, benzo[ghi]perylene and indeno[l,2,3-cd]pyrene were above 90%. The detection limits of PAH with fluorescence at λ_ex=270 nm, λ_em>389 nm ranged from 5.7 pg to 69.5 pg.     

Resolution of 13 polycyclic aromatic hydrocarbons by constant-wavelength synchronous spectrofluorometry.

A method capable of determining 13 PAHs (acenaphthene, anthracene, benzo[a]anthracene, benzo[a]pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene, chrysene, dibenzo[ah]anthracene, fluoranthene, fluorene, indene[1,2,3-cd]pyrene, phenanthrene and pyrene) in a mixture of 16 EPA PAHs by second derivative synchronous spectrofluorometry in the constant wavelength mode was developed. It has not been possible to determine the following PAHs in the mixture: acenaphthylene, benzo[ghi]perylene and naphthalene. The approach studied allows the sensitive, rapid and inexpensive identification and quantitation of 13 PAHs in a solution of hexane. The detection limits are <1 microg L(-1) (except for chrysene and phenanthrene).     

Error propagation as a factor in selection of measurement intervals for the determination of polycyclic aromatic hydrocarbons by second-derivative spectrofluorimetry

The most suitable wavelength intervals were selected for the determination of 4 polycyclic aromatic hydrocarbons (PAHs; benzo[g,h,i]perylene, dibenzo[a,h]anthracene, pyrene, and triphenylene) in very complex mixtures of 11 PAHs: anthracene, benz[a]anthracene, benzo[a]pyrene, benzo[b]fluoranthene, benzo[g,h,i]perylene, benzo[k]fluoranthene, chrysene, dibenz[a,h]anthracene, phenanthrene, pyrene, and triphenylene. The multiple linear regression algorithm was applied to measurements made in several wavelength intervals previously selected on the basis of sensitivity and minimum number of interfering compounds. Of the different models obtained, those displaying minimum error propagation in the analytical result were selected. By applying the models proposed in this study, we precisely and accurately determined benzo[g,h,i]perylene, dibenz[a,h]anthracene, pyrene, and triphenylene in complex mixtures--a feat that could not be achieved by the use of constant-wavelength spectrofluorimetry in combination with second-derivative techniques.     

Penetration of mercury-adsorbed phospholipid monolayers by polynuclear aromatic hydrocarbons

The penetration of phospholipid monolayers (dioleoyl lecithin) adsorbed on mercury by polynuclear aromatic hydrocarbons (PAH) is described. The PAH studied were anthracene, phenanthrene, pyrene, benzo[a]anthracene, fluoranthene and perylene. The penetration is monitored by measuring the differential capacitance of the monolayer; the uptake of PAH causes a potential shift (up to ?0.25 V) in the cathodic capacitance peaks. This occurs without displacement of the lipid from the mercury. The differential capacitance is measured by out-of-phase (90°) a.c. voltammetry and rapid cyclic voltammetry. The PAH permeate the mercury-adsorbed lipid layers from dilute aqueous solution; the order of affinity is benzo[a]anthracene > fluoranthrene = pyrene > anthracene = phenanthrene. The rates of penetration vary for the different compounds and depend on their water solubility.     

Efficient syntheses of C(8)-aryl adducts of adenine and guanine formed by reaction of radical cation metabolites of carcinogenic polycyclic aromatic hydrocarbons with DNA

The synthesis of the C(8)-aryl adducts of adenine and guanine formed by reaction of the radical cation metabolites of carcinogenic polycyclic aromatic hydrocarbons (PAHs), such as benzo[a]pyrene (BP) and dibenzo[def,p]chrysene (DBC), with DNA is reported. The synthetic approach involves in the key step direct reaction of a PAH aldehyde with a di- or triamine precursor of a purine. The method is operationally simple, affords good yields of adducts, and is broad in its scope. The C(8)-aryl adducts of adenine and guanine derived from BP (6-BP-8-Ade and 6-BP-8-Gua) and DBC (10-DBC-8-Ade and 10-DBC-8-Gua) were synthesized in good yields by this method. Analogous C(8)-aryl adenine and guanine derivatives of other PAHs (anthracene, benz[a]anthracene, and chrysene) were also readily prepared via this approach. This method of synthesis is superior to the only method that is currently available. It entails direct reaction of short-lived PAH radical cations (generated electrochemically or chemically) with 2'-deoxyribonucleosides or the corresponding purine bases. It provides the adducts in low yields accompanied by complex mixtures of secondary products. An alternative synthesis that involves Pd-catalyzed Suzuki-Miyaura coupling of arylboronic acids with 8-bromopurine nucleosides was also investigated. Although the C(8)-purine adducts of PAHs, such as naphthalene, phenanthrene, pyrene, and chrysene, could be prepared by this method, analogous adducts of carcinogenic PAHs and other structurally related PAHs, e.g., anthracene, benz[a]anthracene, benzo[a]pyrene, and dibenzo[def,p]chrysene, could not be obtained. This difference was shown to be a consequence of the facility of competing hydrolytic deboronation of the corresponding arylboronic acids.     

Validation of a method for extraction of polycyclic aromatic hydrocarbons from sewage sludge and analysis by GC-MS

In the present study, the solid–liquid extraction with low temperature purification was validated for the determination of 16 polycyclic aromatic hydrocarbons from sewage sludge by gas chromatography-mass spectrometry. Recoveries ranged 70–114% for naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene and chrysene, while the compounds benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene, dibenzo[a,h]anthracene and benzo[g,h,i]perylene showed recoveries of between 40 and 70%. The relative standard deviation was less than 13% for all of the compounds. Negative matrix effect was observed on the 10 compounds with less retention time in the chromatographic analysis and positive matrix effect noticed on the others. The limits of quantification were from 2 to 20 μg kg^?1, about 30 times less than the maximum residue limit allowed in sludge by the European Union. The validated method produced quantification of 11 PAHs in one sludge sample at concentrations ranging 20–2000 μg kg^?1.     

Implementation of comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry for the simultaneous determination of halogenated contaminants and polycyclic aromatic hydrocarbons in fish

In the presented study, comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC?×?GC-TOFMS) was shown to be a powerful tool for the simultaneous determination of various groups of contaminants including 18 polychlorinated biphenyls (PCBs), seven polybrominated diphenyl ethers (PBDEs), and 16 polycyclic aromatic hydrocarbons (PAHs). Since different groups of analytes (traditionally analyzed separately) were included into one instrumental method, significant time savings were achieved. Following the development of an integrated sample preparation procedure for an effective and rapid isolation of several groups of contaminants from fish tissue, the GC?×?GC-TOFMS instrumental method was optimized to obtain the best chromatographic resolution and low quantification limits (LOQs) of all target analytes in a complex mixture. Using large-volume programmable temperature vaporization, the following LOQs were achieved-PCBs, 0.01-0.25 μg/kg; PBDEs, 0.025-5 μg/kg; PAHs 0.025-0.5 μg/kg. Furthermore, several capillary column combinations (BPX5, BPX50, and Rxi-17Sil-ms in the first dimension and BPX5, BPX50, Rt-LC35, and HT8 in the second dimension) were tested during the experiments, and the optimal separation of all target analytes even of critical groups of PAHs (group (a): benz[a]anthracene, cyclopenta[cd]pyrene and chrysene; group (b): benzo[b]fluoranthene, benzo[j]fluoranthene and benzo[k]fluoranthene; group (c): dibenz[ah]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene) was observed on BPX5?×?BPX50 column setup. Moreover, since the determination of target analytes was performed using TOFMS detector, further identification of other non-target compounds in real life samples was also feasible.     

New synthetic approaches to polycyclic aromatic hydrocarbons and their carcinogenic oxidized metabolites: derivatives of benzo[s]picene, benzo[rst]pentaphene, and dibenzo[b,def]chrysene

A new synthetic approach to polycyclic aromatic compounds is described that entails in the key steps double Suzuki coupling of PAH bisboronic acid derivatives with o-bromoaryl aldehydes to furnish aryl dialdehydes that are converted to larger polycyclic aromatic ring systems by either (a) conversion to diolefins by Wittig reaction followed by photocyclization or (b) reductive cyclization with triflic acid and 1,3-propanediol. This synthetic method provides convenient access to as many as three different polycyclic aromatic ring systems from a single Suzuki coupled intermediate. It was utilized to synthesize substituted derivatives of benzo[s]picene, benzo[rst]pentaphene, dibenzo[b,def]chrysene, and 13,14-dihydro-benz[g]indeno[2,1-a]fluorene, as well as the putative carcinogenic bisdihydrodiol metabolites of benzo[s]picene, benzo[rst]pentaphene, and dibenzo[b,def]chrysene.     

Flash vacuum thermolysis of acenaphtho[1,2-a]acenaphthylene. Thermal behaviour of a polycyclic aromatic hydrocarbon containing two abutting pentagons

FVT of acenaphtho[1,2-a]acenaphthylene (1) gave acenaphtho[1,2-e]acenaphthylene (2), cyclopenta[cd]perylene (3) and cyclopenta[rst]benzo[hi]chrysene (4). The formation of 3 and 4 indicates that, besides ring contraction/ring expansion of 1 giving 2, homolytic scission of a five-membered ring carbon---carbon single bond of 1 is an important competitive process.     

Detection and identification of carcinogen-peptide adducts by nanoelectrospray tandem mass spectrometry

Nanoelectrospray (nanoES) tandem mass spectrometry was used to examine covalently modified peptides in crude enzymatic digests of human serum albumin (HSA) that had been exposed to either benzo[a]pyrene diol epoxide (B[a]PDE, 1), chrysene diol epoxide (CDE, 2), 5-methylchrysene diol epoxide (5MeCDE, 3), or benzo[g]chrysene diol epoxide (B[g]CDE, 4). The low flow rates of nanoES (～20 nL/min) allowed several MS/MS experiments to be optimized and performed on a single sample with very little sample consumption (～30 min analysis time/µL sample). Initially, nanoES was compared with conventional LC/MS/MS analysis of carcinogen-peptide adducts. For example, nanoES analysis of an unseparated digest of B[a]PDE-treated serum albumin revealed the same peptides (RRHPY and RRHPY-FYAPE) that were previously shown, by LC/MS/MS, to be adducted with B[a]PDE. In addition, nanoES could detect unstable peptide adducts that might not otherwise have been directly observable. Finally, nanoES was shown to be an effective way to screen mixtures of modified and unmodified peptides for which no chromatographic information is available.     

Optimization of the matrix solid-phase dispersion sample preparation procedure for analysis of polycyclic aromatic hydrocarbons in soils: comparison with microwave-assisted extraction

A fast and simple preparation procedure based on the matrix solid-phase dispersion (MSPD) technique is proposed for the first time for the isolation of 16 polycyclic aromatic hydrocarbons (PAHs) from soil samples. Naphthalene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benz[a]anthracene, chrysene, benzo[e]pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenzo[a,h]anthracene, benzo[g,h,i]perylene, and indeno[1,2,3-c,d]pyrene were considered in the study. Extraction and clean-up of samples were carried out in a single step. The main parameters that affect extraction yield, such as dispersant, type and amount of additives, clean-up co-sorbent and extractive solvent were evaluated and optimized. The addition of an alkali solution in MSPD was required to provide quantitative recoveries. Analytical determinations were carried out by high performance liquid chromatography (HPLC) with fluorescence detection. Quantification limits (between 0.01 and 0.6 ng g(-1) dry mass) were well below the regulatory limits for all the compounds considered. The extraction yields for the different compounds obtained by MSPD were compared with the yields obtained by microwave-assisted extraction (MAE). To test the accuracy of the MSPD technique, the optimized methodology was applied to the analysis of standard reference material BCR-524 (contaminated industrial soil), with excellent results.     

Supercritical fluid extraction of polycyclic aromatic hydrocarbons from liver samples and determination by HPLC-FL

An extraction/clean-up procedure by SFE was developed for isolating PAHs from liver samples for subsequent HPLC-FL determination of ten PAHs in the enriched extract. Recoveries (90-115%) and RSD % (< or =7.7) were satisfactory. When applied to 11 samples of bird of prey (Tyto alba) protected species and classified of special interest, from the Galicia (Northwest to Spain), benzo[ghi]perylene and indeno[1,2,3-cd]pyrene were undetectable; chrysene and benzo[a]pyrene are only detected in one sample; benzo[a]anthracene and benzo[k]fluoranthene are only quantified in one sample and benzo[b]fluoranthene in two samples. The other PAHs, anthracene, fluoranthene and pyrene are present in almost all the samples.     

Differentiation of polycyclic aromatic hydrocarbons using electron capture negative chemical ionization

A number of isomeric polycyclic aromatic hydrocarbons may be distinguished using electron capture negative chemical ionization when methane is used as a buffer gas, including benzo[a]pyrene and benzo[e]pyrene. The ionization behavior of these compounds may be predicted, on the basis of their electron afinities, allowing compounds to be distinguished without the use of standards.