两种[对苯乙炔—2,5—二（十二烷氧基）对苯乙炔]共聚物的合？…

用含氯前聚物路线和Ｈｅｃｋ反应分别合成「对苯乙炔－２，５－二（十二烷氧基）对苯乙炔」无夫共聚物及交替共聚物，由元素分析，凝胶渗透色谱，吸收光谱及ＤＳＣ对其进行了表征，研究了共聚物的组成与导电率，溶解性及发光性能的关系。     

主链含PEO链段的聚对苯乙炔类蓝色电致发光共聚物

采用Ｗｉｔｔｉｇ反应合成了一种分子主链上烷氧基取代刚性共轭聚对苯乙炔（ＰＰＶ）民柔性聚氧化乙烯（ＰＥＯ）链段交替排列的、可溶于氯仿与四氢呋喃等普通有机溶剂的新型结构的聚对苯乙炔类功能性发光共聚物ＥＯ－ＰＰＶ。采用ＦＴ－ＩＲ、＾１Ｈ－ＮＭＲ、ＤＳＣ、ＧＰＣ、元素分析等手段对共聚物进行了表征,并制备了结构为（Ａｌ）Ｃａ／ＥＯ－ＰＰＶ／ＩＴＯ的单层电致发光器件、器件的最大发光波长位于４７５ｎｍ（蓝光）。     

不对称烷氧基取代聚对苯乙炔的合成及电致发光性能

利用强碱诱导的去卤缩合聚合法，合成了不对称烷氧基取代的聚（２－甲氧基－５－十二烷氧基－１，４－对苯乙炔）（ＰＭＤＰＶ）．其溶解性和成膜性能优于对称取代的聚（２，５－双十二烷氧基－１，４－对苯乙炔）．以ＰＭＤＰＶ为发光层质的聚合物电致发光器件，其发光峰值波长为６０５ｎｍ．并用ＩＲ、ＵＶ－Ｖｉｓ、ＴＧＡ、１ＨＮＭＲ、ＧＰＣ等对所合成的聚合物进行了表征．     

4,4′-二乙炔二苯甲烷与苯乙炔的共聚及共聚物的表征研究

本文做了4,4′-二乙炔二苯甲烷的本体热均聚和催化均聚,并用(Ph_3P)_2PdCl_2为催化剂做了4,4′-二乙炔二苯甲烷与苯乙炔的共聚,对均聚和共聚物中的不溶不熔组分测定了密度、溶胀度、Huggins参数以及交联点间的平均分子量(?)_c。实验表明,该交联聚合物的最良溶剂是四氢呋喃,溶度参数为9.9ca1~0.5。cm~(-1.5),当用四氢呋喃为溶剂时的Huggins参数为0.34,并且在单体摩尔比中4,4′-二乙炔二苯甲烷用量越多,溶胀度越小,交联度越大。红外光谱分析表明,所有均聚及共聚物都为反式结构。     

1,2-二乙炔基四苯基乙硅烷与1,2-二乙炔基四甲基乙硅烷的共聚及其光解

１，２－二乙炔基四苯基乙硅烷与１，２－二乙炔基四甲基乙硅烷在催化剂铑（Ⅰ）络合物［氯化三－（三苯基膦）铑］的作用下得到一种新的含硅共聚物。实验证明此共聚物的主链是有规交替结构。研究了固体薄膜及其溶液的光解作用，并测定了ＳｂＦ５蒸气处理后的共聚物薄膜的导电性。     

4,4′-二乙炔二苯甲烷与苯乙炔的共聚及共聚物的表征研究

 本文做了4,4′-二乙炔二苯甲烷的本体热均聚和催化均聚,并用(Ph₃P)₂PdCl₂为催化剂做了4,4′-二乙炔二苯甲烷与苯乙炔的共聚,对均聚和共聚物中的不溶不熔组分测定了密度、溶胀度、Huggins参数以及交联点间的平均分子量M_c。实验表明,该交联聚合物的最良溶剂是四氢呋喃,溶度参数为9.9ca1^0.5。cm^-1.5,当用四氢呋喃为溶剂时的Huggins参数为0.34,并且在单体摩尔比中4,4′-二乙炔二苯甲烷用量越多,溶胀度越小,交联度越大。红外光谱分析表明,所有均聚及共聚物都为反式结构。     

聚苯撑乙炔-苯并噻二唑共聚物的合成及光谱性能

利用钯催化剂[Pd(PPh₃)₂Cl₂]和相转移催化剂(PTC), 采用Heck交叉偶联缩聚反应合成了聚(苯撑乙炔撑-苯并噻二唑)系列交替共聚物(PPE-BT), 比较了聚合物的紫外吸收光谱和荧光光谱特征.     

1,4—双（取代苯乙炔基）苯及反,反—1,4—双（β—取代苯乙…

测定了１，４－双（取代苯乙炔基）苯（Ⅰ）和反，反－１，４－双（β－取代苯乙烯基）苯（Ⅱ）的紫外光谱、荧光光谱。用ＣＮＤＯ／Ｓ－ＣＩ和ＨＭＯ方法对苯乙炔、二苯乙炔和（Ⅰ）及苯乙烯、１，２－二苯乙烯和（Ⅱ）的激发能进行了计算和研究。讨论了化合物结构对光谱的影响。     

苯乙炔基封端聚酰亚胺材料研究进展

在过去二十年中，芳香族聚酰亚胺材料得到越来越广泛的应用，其中苯乙炔基封端的聚酰亚胺材料因其优异的性能成为目前耐高温聚合物材料研究的热点。本文综述了苯乙炔基封端聚酰亚胺材料的研究现状与发展趋势，着重对材料的化学结构设计与制备方法、以及化学结构与性能之间的关系进行介绍。     

去卤缩聚法合成蓝色电致发光聚合物聚（2,5—二庚基）对苯乙炔

利用双卤甲基苯衍生物在强碱诱导下的缩合反应，合成了共轭态可溶的聚对苯乙炔，并利用ＩＲ，ＵＶ－Ｖｉｓ，＾１Ｈ－ＮＭＲ，ＴＧＡ等对聚合物结构与性能进行了有征，其Ｎｎ＝０．４８×１０＾４。电致发光器件的发光峰值波长为４８６ｎｍ，起亮电压为２２Ｖ。     

Properties of well‐defined alternating and random copolymers of methacrylates and styrene prepared by controlled/living radical polymerization

The physical properties of well‐defined alternating copolymers poly(methyl methacrylate‐alt‐styrene) and poly(n‐butyl methacrylate‐alt‐styrene), prepared by reversible addition–fragmentation chain transfer polymerization in the presence of Lewis acids, were investigated with differential scanning calorimetry, wide‐angle X‐ray scattering, and dynamic mechanical measurements. The properties were compared with those of random copolymers of the same overall composition and the corresponding homopolymers. Wide‐angle X‐ray scattering data showed that the alternating copolymers possessed a more regular comonomer sequence than the random copolymers. The thermomechanical properties of alternating copolymers and random copolymers were quite similar and typical for amorphous polymers, but in one of the cases studied the glass‐transition temperature for alternating copolymer was remarkably higher than for the random copolymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3440–3446, 2005     

Synthesis and optoelectronic properties of silole‐containing polyfluorenes with binary structures

2,5‐Bis(2‐bromofluorene‐7‐yl)silole was prepared by a modified one‐pot synthesis with a reverse addition procedure, from which novel silole‐containing polyfluorenes with binary random and alternating structures (silole contents between 4.5 and 25% and high M_w up to 509 kDa were successfully synthesized. The well‐defined repeating unit of the alternating copolymer comprises a terfluorene and a silole ring. Optoelectronic properties including UV absorption, electrochemistry, photoluminescence (PL), and electroluminescence (EL) of the copolymers were examined. The different excitation energy transfers from fluorene to silole of the copolymers in solution and in the solid state were compared. The films of the copolymers showed silole‐dominant green emissions with high absolute PL quantum yields up to 83%. EL devices of the copolymers with a configuration of ITO/PEDOT/copolymer/Ba/Al displayed exclusive silole emissions peaked at around 543 nm and the highest EL efficiency was achieved with the alternating copolymer. Using the alternating copolymer and poly(9,9‐dioctylfluorene) as the blend‐type emissive layer, a maximum external quantum efficiency of 1.99% (four times to that of the neat film) was realized, which was a high efficiency so far reported for silole‐containing polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 756–767, 2007     

Donor–acceptor complexes in copolymerization. XLIII. Cyclization of alternating and random styrene–(meth)acrylic ester copolymers

Equimolar alternating copolymers of styrene and methyl methacrylate (prepared with Et_1.5AlCl_1.5, SnCl₄, and ZnCl₂) as well as equimolar random copolymer were treated with polyphosphoric acid at 135°C. The extent of cyclization of the alternating copolymers was about 40%, independent of the cotacticity of the copolymer, and there was little or no crosslinking. The random copolymer underwent only 10% cyclization and considerable crosslinking. The extent of cyclization of the alternating copolymer of styrene and methyl acrylate (prepared with Et_1.5AlCl_1.5) was the same as that of the random copolymer and was lower than that of the corresponding methyl methacrylate copolymer. Both alternating and random copolymers underwent extensive crosslinking.     

Synthesis and property comparisons of random and alternating hybrid fluorocarbon–fluorosilicone copolymers

The synthesis of a number of random and alternating copolymers of a fluorosiloxane and a hybrid fluorocarbon-fluorosiloxane are described, along with property comparisons. The random copolymers were prepared by silanol–chlorosilane condensation, while the alternating copolymer preparation involved the use of the novel silanol—silyl-N-methylacetamido condensation reaction, which was used to produce a high polymer, M?_n = 260,000. The physical properties of the two classes of polymers which were compared include: glass transition temperatures, reversion resistance, and thermal and oxidative weight loss. From these comparisons, it was possible to gauge the relative effects of backbone architecture, as well as monomer ratios, upon copolymer properties. Comparison of the thermogravimetric analysis (TGA) of both the random and alternating LS/FCS copolymer systems with the parent LS and FCS homopolymers indicates that the copolymer generally show little variation among themselves, but better thermal characteristics than either of the parents.     

MOLECULAR DESIGN OF LIGHT EMITTING POLYMERS

Fluorene-based alternating and statistical copolymers were synthesized by employing reaction methods of Wittig,Heck and Suzuki. The copolymers were classified into three groups with the photoluminescence (PL) emission maxima at420, 475 and 500 nm, respectively. Statistical copolymers with two chromophores having PL emission maxima at 420 and475 nm emitted light with the emission maximum at 475 nm on photoexcitation at 365 nm and improved the quantumefficiency by the energy transfer. However, the intramolecular energy transfer was inefficient compared to the intermolecularenergy transfer when the two chromophores were apart from each other in the range of the Forster critical distance. Fluorene-pyridinedivinylene alternating copolymer was synthesized by the Wittig reaction and found to have physical, electronic andelectrochemical properties of the individual units intact. The double-layered light emitting diode (LED) with the statisticalcopolymer as an emitting layer and the pyridine-containing copolymer as an electron transporting-hole blocking layer, whichwere sandwiched between ITO and Al, displayed a quantum efficiency of 0.1%.     

N-苯基马来酰亚胺/对氯甲基苯乙烯活性可控超支化交替共聚合的研究

采用核磁共振氢谱, 研究了N-苯基马来酰亚胺(NPMI)与对氯甲基苯乙烯(PCMS)在氘代氯仿中的络合性能. 以PCMS作为引发剂单体, 通过原子转移自由基聚合(ATRP)引发NPMI-PCMS电子转移络合物(CTC)进行活性可控超支化共聚合. 考察了单体初始摩尔分数对共聚物组成和其玻璃化转变温度的影响, 用Kelen-Tudos法计算得到两种单体的竞聚率分别为 r_NPMI＝0.11和r_PCMS＝0.25. 结果表明, 当单体配比f_NPMI＝0.4～0.7时, 共聚物具有交替结构, 其耐热性随着NPMI含量的增加而提高. 此外还考察了溶剂、聚合温度等对共聚合反应动力学的影响. 并进一步用所得超支化交替共聚物作为大分子引发剂, 引发甲基丙烯酸甲酯(MMA)聚合, 制得了多臂超支化接枝共聚物 poly(NPMI-co-PCMS)/poly(MMA).     

Head-to-head vinyl polymers. IV. Preparation and characterization of equimolar head-to-head copolymers of acrylic acid and its esters

The alternating copolymer of ethylene with maleic anhydride was esterified with a number of aliphatic alcohols to yield its monoesters, which correspond structurally to equimolar (1:1) head-to-head (h-h) copolymers of acrylic acid with alkyl acrylates. In addition, they were methylated with diazomethane to 1:1 h-h copolymers of methyl acrylate with alkyl acrylates. For comparison the 1:1 head-to-tail (h-t) copolymers of methyl acrylate with alkyl acrylates were prepared by radical copolymerizations. Some chemical, physical, and thermal properties of these 1:1 h-h and h-t copolymers were evaluated and compared. The softening and glass transition temperatures of the 1:1 h-h copolymers were somewhat higher than those of the corresponding 1:1 h-t copolymers, which indicated that the h-h replacements made the polymer chain stiffer and less flexible. The 1:1 h-h copolymers were also observed to degrade thermally at somewhat higher temperatures and with higher rates than the 1:1 h-t copolymers. The ratio of alcohol to monomer found in the pyrolysis products was higher for the 1:1 h-h than for its respective 1:1 h-t copolymer.     

以氯代钒酸酯-三异丁基铝催化体系合成丁二烯-丙烯交替共聚物的研究

本文比较了各种氯代钒酸酯-三异丁基铝体系催化丁二烯、丙烯交替共聚的活性,得出氯代钒酸二新戊酯-三异丁基铝体系催化活性最高。能制得高分子量的交替共聚物。研究了该催化体系的特点和聚合规律及提高共聚物[η]的途径。在-76--45℃温度范围内可以制得正[η]为1.7-2.6dl/g的丁丙交替共聚物,单体转化率在80％以上。通过分析鉴定,证明产物交替度在95％左右,反式1,4丁二烯组分含量在95％以上。     

Copolymers containing alternating sequences of nucleic acid base pairs. II. Polymerization studies

The objective of this project was to utilize the alternating copolymerizability of electrondonor monomers with electron-acceptor monomers to selectively introduce nucleic acid bases into copolymers in a controlled sequence distribution. To this end, maleimide monomers containing the adenine, thymine, cytosine, and 6-chloropurine moieties were converted to their hompolymers. The homopolymer of 1-(vinyloxyethoxy)thymine was also prepared. Alternating copolymers of the adenine maleimide monomer and the corresponding 6-chloropurine maleimide monomer with 1-(vinyloxyethoxy)thymine were prepared. The latter copolymer was converted to the alternating adenine–thymine copolymer by reaction with ammonia. Characterization of the polymers and copolymers via spectroscopic methods and physical measurements confirm their proposed structures. Monomer syntheses and characterization, as well as studies designed to establish the extent and nature of adenine–thymine interactions in the copolymers, are reported in accompanying papers.     

强阴离子型丙烯酰胺共聚物P(AM-co-NaAMPS)的结构与性能

在水介质中实施了丙烯酰胺 (AM)与 2 丙烯酰胺基 2 甲基丙磺酸钠 (NaAMPS)的溶液共聚合 ,制备了组成系列变化的强阴离子型共聚物P(AM co NaAMPS) ;通过红外光谱法与元素分析法对共聚物的组成进行了表征 ;稀释外推粘度法测定了共聚物的特性粘数及Huggins常数 ;测定了共聚物纯水溶液及盐水溶液的表观粘度及高温下共聚物盐水溶液的粘度保持率 ;重点考察了共聚物的结构与组成对其各种性能的影响规律 .实验结果表明 ,在聚丙烯酰胺 (PAM)分子主链上引入NaAMPS链节后 ,磺酸根的强阴离子性与庞大侧基的位阻效应 ,赋于共聚物P(AM co NaAMPS)以优良的溶解、增稠、耐温与抗盐性能 ,且这些性能随共聚物的结构与组成的改变发生规律性的变化 .