Analytical methodologies for determination of artificial sweeteners in foodstuffs

Artificial high-intensity sweeteners are used increasingly frequently for food production. The food industry tends to highlight beneficial aspects of their use (e.g., tooth friendliness, increasing the quality of life of those suffering from different forms of diabetes and the possibility of weight control without anyone sacrificing their favorite “unhealthy” drinks or snacks). However, some consumers are deeply concerned about the safety of artificial sweeteners and claim that the food industry is replacing natural beet sugar or cane sugar for purely economic reasons.Most of these food additives have a maximum usable dose or a maximum allowable concentration specified for a given type of food. In order to assure consumer safety, it is necessary to control the content of sweeteners in foodstuffs. Analytical methods (including high-performance liquid chromatography, ion chromatography, thin-layer chromatography, gas chromatography, capillary electrophoresis, flow-injection analysis, electroanalysis and spectroscopy) can determine sweeteners individually and simultaneously in mixtures. This review focuses on the application of some popular analytical procedures for determination of artificial sweeteners in food.     

Off-axis field approximations for ion traps with apertures

In recent work (Int. J. Mass Spec., vol. 282, pp. 112–122) we have considered the effect of apertures on the fields inside rf traps at points on the trap axis. We now complement and complete that work by considering off-axis fields in axially symmetric (referred to as “3D”) and in two dimensional (“2D”) ion traps whose electrodes have apertures, i.e., holes in 3D and slits in 2D. Our approximation has two parts. The first, E_noAperture, is the field obtained numerically for the trap under study with apertures artificially closed. We have used the boundary element method (BEM) for obtaining this field. The second part, E_{dueToAperture}, is an analytical expression for the field contribution of the aperture.In E_{dueToAperture}, aperture size is a free parameter. A key element in our approximation is the electrostatic field near an infinite thin plate with an aperture, and with different constant-valued far field intensities on either side. Compact expressions for this field can be found using separation of variables, wherein the choice of coordinate system is crucial. This field is, in turn, used four times within our trap-specific approximation.The off-axis field expressions for the 3D geometries were tested on the quadrupole ion trap (QIT) and the cylindrical ion trap (CIT), and the corresponding expressions for the 2D geometries were tested on the linear ion trap (LIT) and the rectilinear ion trap (RIT). For each geometry, we have considered apertures which are 10%, 30%, and 50% of the trap dimension. We have found that our analytical correction term E_{dueToAperture}, though based on a classical small-aperture approximation, gives good results even for relatively large apertures.     

The Inject-Mix-React-Separate-and-Quantitate (IMReSQ) approach to studying reactions in capillaries

A capillary or a narrow channel is an attractive medium for studying reactions. A capillary can serve as (i) a microreactor for carrying out a reaction in a nanoliter volume and (ii) a separation column to separate the reaction products prior to their quantitation. The term “Inject-Mix-React-Separate-and-Quantitate” (IMReSQ) includes all analyses of reactions in capillaries that involve these five steps. We analyze these steps in detail and formulate the requirements for them to be generic and quantitative.     

Determination of sulfur components in natural gas: A review

More stringent environmental regulations as well as higher demands presently being imposed on the sulfur content of natural gas feed-stocks for chemical processes necessitate the development of new analytical procedures for sulfur determination in natural gas. Only analytical procedures based on gas chromatography can meet the sensitivity and accuracy requirements dictated by environmental regulation institutions and modern chemical industry. The complexity of the natural gas matrix as well as the extremely low concentration levels at which the sulfur species occur make the development of these analytical methods a true challenge. In this review the three steps common for analytical methods for trace analysis in complex matrices, i.e. pretreatment, chromatographic separation, and detection, are discussed in detail. Possible methods for calibration of the system are discussed in the final section. Various techniques to determine sulfur in natural gas are described. Depending on the application, the most suitable system has to be selected. For example, for on-line application in a hazardous area a simple and rugged system is required, i.e. a simple gas chromatograph with a flame photometric detector, while for laboratory application a more complex instrument including preconcentration, column switching, and more exotic detection systems could be more suitable. Therefore it is crucial to define the requirements of the instrument at an early stage and use the information in this review article to develop/select a dedicated instrument/procedure for the problem at hand.     

Multimetallic Nanoparticles as Alternative Antimicrobial Agents: Challenges and Perspectives

Recently, infectious diseases caused by bacterial pathogens have become a major cause of morbidity and mortality globally due to their resistance to multiple antibiotics. This has triggered initiatives to develop novel, alternative antimicrobial materials, which solve the issue of infection with multidrug-resistant bacteria. Nanotechnology using nanoscale materials, especially multimetallic nanoparticles (NPs), has attracted interest because of the favorable physicochemical properties of these materials, including antibacterial properties and excellent biocompatibility. Multimetallic NPs, particularly those formed by more than two metals, exhibit rich electronic, optical, and magnetic properties. Multimetallic NP properties, including size and shape, zeta potential, and large surface area, facilitate their efficient interaction with bacterial cell membranes, thereby inducing disruption, reactive oxygen species production, protein dysfunction, DNA damage, and killing potentiated by the host’s immune system. In this review, we summarize research progress on the synergistic effect of multimetallic NPs as alternative antimicrobial agents for treating severe bacterial infections. We highlight recent promising innovations of multimetallic NPs that help overcome antimicrobial resistance. These include insights into their properties, mode of action, the development of synthetic methods, and combinatorial therapies using bi- and trimetallic NPs with other existing antimicrobial agents.     

Standard operation protocol for analysis of lipid hydroperoxides in human serum using a fully automated method based on solid-phase extraction and liquid chromatography-mass spectrometry in selected reaction monitoring

Standard operating procedures (SOPs) are of paramount importance in the analytical field to ensure the reproducibility of the results obtained among laboratories. SOPs gain special interest when the aim is the analysis of potentially unstable compounds. An SOP for analysis of lipid hydroperoxides (HpETEs) is here reported after optimization of the critical steps to be considered in their analysis in human serum from sampling to final analysis. The method is based on automated hyphenation between solid-phase extraction (SPE) and liquid chromatography-mass spectrometry (LC-MS). The developed research involves: (i) optimization of the SPE and LC-MS steps with a proper synchronization; (ii) validation of the method-viz. accuracy study (estimated as 86.4% as minimum value), evaluation of sensitivity and precision, which ranged from 2.5 to 7.0 ng/mL (0.25-0.70 ng on column) as quantification limit and precision below 13.2%), and robustness study (reusability of the cartridge for 5 times without affecting the accuracy and precision of the method); (iii) stability study, involving freeze-thaw stability, short-term and long-term stability and stock solution stability tests. The results thus obtained allow minimizing both random and systematic variation of the metabolic profiles of the target compounds by correct application of the established protocol.     

The impact of flow injection on modern chemical analysis: has it fulfilled our expectations? And where are we going?

Presenting a condensation of the opening lecture of the 12th ICFIA conference, this communication presents a view of the impact that flow injection analysis (FIA) has had on modern analytical chemistry, evaluated both within the academic community and outside it, i.e. in “industry”. The ensuing developments of FIA, encompassing sequential injection analysis (SIA) and bead injection lab-on-valve (BI-LOV), are described and their individual features discussed. Finally, some recent results of the activities from the author’s own research group are briefly mentioned.     

Comparison of chemometric methods for brand classification of cigarettes by near-infrared spectroscopy

The combinations of NIR spectroscopy and three classification algorithms, i.e., multi-class support vector machine (BSVM), k-nearest neighbor (KNN) and soft independent modeling of class analogies (SIMCA), for discriminating different brands of cigarettes, were explored. The influence of the training set size on the relative performance of each algorithm was also investigated. A NIR spectral dataset involving the classification of cigarettes of three brands was used for illustration. Three performance criteria based on “correctly classified rate (CCR)”, i.e., “Average CCR”, “95 percentile of CCR” and “S.D. of CCR”, were defined to compare different algorithms. It was revealed that BSVM is significantly better than KNN or SIMCA in the statistical sense, especially in cases where the training set is relatively small. The results suggest that NIR spectroscopy together with BSVM could be an alternative to traditional methods for discriminating different brands of cigarettes.     

The Two Faces of the Guanyl Radical: Molecular Context and Behavior

The guanyl radical or neutral guanine radical G(-H)^• results from the loss of a hydrogen atom (H^•) or an electron/proton (e^–/H⁺) couple from the guanine structures (G). The guanyl radical exists in two tautomeric forms. As the modes of formation of the two tautomers, their relationship and reactivity at the nucleoside level are subjects of intense research and are discussed in a holistic manner, including time-resolved spectroscopies, product studies, and relevant theoretical calculations. Particular attention is given to the one-electron oxidation of the GC pair and the complex mechanism of the deprotonation vs. hydration step of GC^•+ pair. The role of the two G(-H)^• tautomers in single- and double-stranded oligonucleotides and the G-quadruplex, the supramolecular arrangement that attracts interest for its biological consequences, are considered. The importance of biomarkers of guanine DNA damage is also addressed.     

On the ionic conductivity and phase transitions in the Li2SO4---Li2WO4 system and their relation to ion transport mechanism

Secco et al. have performed several measurements of ionic conductivity, which they have considered as “convincing evidence” that the “paddle-wheel” mechanism does not contribute significantly to ion conductivity in Li₂SO₄-based compositions. However, a comparison of their results in the high-conductivity range with those of other investigators suggests that their data are artifacts. The cause of this is that the resistance of their sulfate-rich samples is about 0.1 ohm at high temperatures. Thus, their results are reliable only for “normal,” i.e., low, conductivities. It is briefly summarized why the “paddle-wheel” mechanism for ion transport is superior to a percolation-type mechanism for a few high-conducting phases.     

Quantitative Determination of Copper: Combining Project-Based Laboratories with Single-Analyte Detection

A multiweek experiment is presented for use in undergraduate instrumental analysis courses. The experiment combines project-based laboratories and single-analyte detection to provide students with experience in method development and validation, and to give them a more realistic experience in the analytical laboratory. Working together as a team, students develop methods for the detection of an analyte (i.e., copper) in water samples using at least two spectroscopic instruments (e.g., ICP-AES, AA, UV-vis, fluorescence). Student teams are given only topical information about their projects, and must research and plan the analyses, learn the instrumental methods to be used, obtain figures of merit (e.g., detection limits) from Beers law plots, analyze commercial water samples, and produce a standard operating protocol for one of their methods, which will be validated by another team during a subsequent laboratory. Goals of this approach include promoting teamwork and building student confidence in approaching and operating unfamiliar instrumentation. Even more importantly, students are placed in the position of being scientists and having to make decisions and recommendations. Each step of the analytical process must be carefully considered, and its significance assessed as there are no recipes to follow as they develop their methods and make comparisons between different techniques for the determination of a single analyte.     

三嗪基多孔有机材料的合成及在固相微萃取应用中的研究进展

三嗪基多孔有机材料(TPOPs)具有较大的比表面积、可调的孔道结构、较高的热和化学稳定性、丰富的π键体系等诸多优点,目前被广泛应用于气体储存、催化、能源转化和吸附等诸多领域。基于TPOPs的固相微萃取(SPME)技术近年来引起了人们的极大兴趣,成为样品前处理技术领域的研究热点之一。该文简要地综述了近年来TPOPs的合成方法及其在固相微萃取领域的应用与发展,并对该领域研究进行了展望。     

Label-free cell separation and sorting in microfluidic systems

Cell separation and sorting are essential steps in cell biology research and in many diagnostic and therapeutic methods. Recently, there has been interest in methods which avoid the use of biochemical labels; numerous intrinsic biomarkers have been explored to identify cells including size, electrical polarizability, and hydrodynamic properties. This review highlights microfluidic techniques used for label-free discrimination and fractionation of cell populations. Microfluidic systems have been adopted to precisely handle single cells and interface with other tools for biochemical analysis. We analyzed many of these techniques, detailing their mode of separation, while concentrating on recent developments and evaluating their prospects for application. Furthermore, this was done from a perspective where inertial effects are considered important and general performance metrics were proposed which would ease comparison of reported technologies. Lastly, we assess the current state of these technologies and suggest directions which may make them more accessible.     

Synthesis and properties of novel thermotropic liquid crystalline copoly(ester-imide)s

Four novel copoly(ester-imide)s based on 3,3',4,4'-biphenyltetracarboxylic dianhydride,bis(trimellitic acid anhydride) phenyl ester and di-p-aminophenyl ester of dicarboxylic acids were synthesized via two-step method in order to investigate whether two imide mesogenic units with different conformation and polarity could control the formation of LC-phase.Polarizes light microscopy(PLM) and differential scanning calorimetry(DSC) have shown that three polymers formed the nematic phase with thread schlieren...     

Research needs in support of the European thematic strategy for soil protection

We report on a Communication of the European Commission to the Council and the European Parliament in 2002, entitled “Towards a Thematic Strategy for Soil Protection”, an operational framework for its implementation and an indicator approach, as a basis for the elaboration of priority research areas for soil protection and the management of Europe's natural resources. From this, we draw the conclusion that soil research should be integrated into comprehensive research areas (e.g., including water and sediments) in order to manage natural resources in Europe.     

The design of molecular sensing interfaces with lipid-bilayer assemblies

We describe the current status of techniques for preparing planar lipid bilayers, the fusion of sensory elements and the design of bilayer interfaces for analytical applications. Advances in bilayer fabrication have allowed preparation of lipid bilayers with membrane resistance of >1 GΩ (“gigaseal”) in flow, microfluidic and array formats, which have enabled single-channel and multi-channel recording. Not only biological but also engineered channels have been adopted as sensory elements for lipid-bilayer-based biosensors. Synthetic and inorganic channels are also emerging for designing membranes for lipid-bilayer sensors. We discuss the potential of lipid bilayers containing biological, engineered or synthetic channels for the design of biosensors, including drug-screening biosensors.     

Systematic Review on Biosynthesis of Silver Nanoparticles and Antibacterial Activities: Application and Theoretical Perspectives

The biosynthesis of silver nanoparticles and the antibacterial activities has provided enormous data on populations, geographical areas, and experiments with bio silver nanoparticles’ antibacterial operation. Several peer-reviewed publications have discussed various aspects of this subject field over the last generation. However, there is an absence of a detailed and structured framework that can represent the research domain on this topic. This paper attempts to evaluate current articles mainly on the biosynthesis of nanoparticles or antibacterial activities utilizing the scientific methodology of big data analytics. A comprehensive study was done using multiple databases—Medline, Scopus, and Web of Sciences through PRISMA (i.e., Preferred Reporting Items for Systematic Reviews and Meta-Analyses). The keywords used included ‘biosynthesis silver nano particles’ OR ‘silver nanoparticles’ OR ‘biosynthesis’ AND ‘antibacterial behavior’ OR ‘anti-microbial opposition’ AND ‘systematic analysis,’ by using MeSH (Medical Subject Headings) terms, Boolean operator’s parenthesis, or truncations as required. Since their effectiveness is dependent on particle size or initial concentration, it necessitates more research. Understanding the field of silver nanoparticle biosynthesis and antibacterial activity in Gulf areas and most Asian countries also necessitates its use of human-generated data. Furthermore, the need for this work has been highlighted by the lack of predictive modeling in this field and a need to combine specific domain expertise. Studies eligible for such a review were determined by certain inclusion and exclusion criteria. This study contributes to the existence of theoretical and analytical studies in this domain. After testing as per inclusion criteria, seven in vitro studies were selected out of 28 studies. Findings reveal that silver nanoparticles have different degrees of antimicrobial activity based on numerous factors. Limitations of the study include studies with low to moderate risks of bias and antimicrobial effects of silver nanoparticles. The study also reveals the possible use of silver nanoparticles as antibacterial irrigants using various methods, including a qualitative evaluation of knowledge and a comprehensive collection and interpretation of scientific studies.     

新型碳纳米管色谱固定相制备的研究进展

碳纳米管（CNTs）作为一种新型的功能材料,具有优异的物理、化学和机械性能,已经在分析化学领域得到了广泛的关注和应用。通过填充法或原位化学气相沉积法,可制备CNTs气相色谱固定相;将CNTs沉积在硅胶微球或有机聚合物基质微球表面,可制备填充式CNTs液相色谱固定相;通过包埋共聚法将CNTs嵌入聚合物整体柱内,可制备毛细管CNTs液相色谱整体柱。本文主要综述了近年来CNTs（单壁碳纳米管和多壁碳纳米管）用于色谱固定相制备的研究现状,包括气相色谱及液相色谱,并对该领域今后的发展进行展望。     

An efficient approach for the synthesis of novel methyl sulfones in acetic acid medium and evaluation of antimicrobial activity

A series of nine methyl sulphones ( 3a –3 i ) starting from the aldehydes ( 1a–1i ) were synthesized in two consecutive steps. In the first step, preparation of allyl alcohols ( 2a–2i ) from their corresponding aldehydes by the reaction of sodium borohydride in methanol at room temperature is reported. Finally, methyl sulphones are synthesized by condensing sodium methyl sulfinates with allyl alcohols in the presence of BF ₃ .Et ₂ O in acetic acid medium at room temperature for about 2–3 h. The reaction conditions are simple, yields are high (85%–95%), and the products were obtained with good purity. All the synthesized compounds were characterized by their ¹ H, ¹³ C NMR, and mass spectral analysis. All the title compounds were screened for antimicrobial activity. Among the compounds tested, the compound 3f has inhibited both Gram positive and Gram negative bacteria effectively and compound 3i has shown potent antifungal activity. These promising components may help to develop more potent drugs in the near future for the treatment of bacterial and fungal infections.     

Biomolecules as promising ligands in the synthesis of metal nanoclusters: Sensing,bioimaging and catalytic applications

The use of metal nanoclusters as sensing probes has recently attracted considerable interest from researchers. In particular, metallic nanoclusters (e.g., Au, Ag, Cu, Pt) have been noticed a wide range of applications in the field of fluorescence sensing and bioimaging. The stabilization of metal nanoclusters with organic molecules, proteins, and amino acids enhances their optical properties and analytical applications. In this review, synthetic routes for the fabrication of metal nanoclusters are summarized. This review also describes the metal nanoclusters properties including aggregation-induced emission, optical absorption, non-linear optical, and chiral properties. We discussed the analytical applications of metal nanoclusters for sensing of wide variety of analytes including drugs, biomolecules, biomarkers. Further, the catalytic applications of metal nanoclusters are also briefly summarized. Finally, we summarize the challenges and future perspectives of metal nanoclusters in analytical chemistry.