一种含乙氧羰基偶氮苯液晶三嵌段共聚物的合成与表征

利用原子转移自由基聚合(ATRP),合成了一种含有乙氧羰基偶氮苯的液晶三嵌段共聚物,并合成了一种同样偶氮生色团的均聚物进行对比.均聚物(PC6ET)由偶氮单体甲基丙烯酸{6-[4-(4-乙氧羰基苯基偶氮)苯氧基]己酯}(C6ET)的ATRP反应制备.嵌段共聚物的合成,先通过聚环氧乙烷(PEO)和过量的2-溴异丁酰溴、三乙胺反应,得到双端大分子引发剂(Br-PEO-Br);再进一步通过C6ET的ATRP反应,得到了三嵌段共聚物(PC6ET-PEO-PC6ET).热分析、偏光显微镜观察和X射线衍射实验证实,合成的均聚物和嵌段共聚物均为近晶型液晶聚合物.三嵌段共聚物的液晶清亮点比均聚物的稍低.     

一种含假芪型偶氮生色团两亲性嵌段共聚物的合成与表征

利用原子转移自由基聚合（ATRP）合成了一种新型的含假芪型偶氮生色团的两亲性嵌段共聚物P（HEMA-b-6CNAzo）。首先,采用ATRP引发剂引发三甲基硅保护的羟乙基甲基丙烯酸酯（HEMA—TMS）聚合,得到大分子引发剂P（HEMA—TMS）;接着进一步引发单体甲基丙烯酸6-（N_甲基苯胺基）己酯进行ATRP反应,得...     

化学酶法合成五嵌段聚合物及其自组装行为的研究

用酶促开环聚合与ATRP方法相结合,制备了聚甲基丙烯酸六氟丁酯-聚己内酯-聚乙二醇-聚己内酯-聚甲基丙烯酸六氟丁酯(PHFMA-b-PCL-b-PEG-b-PCL-b-PHFMA)五嵌段聚合物.首先用Novozym e 435作为催化剂合成了聚己内酯-聚乙二醇-聚己内酯三嵌段聚合物,然后通过端基官能化法合成了大分子引发剂,并用其引发甲基丙烯酸六氟丁酯(HFMA)的ATRP反应,合成了五嵌段聚合物.通过核磁和GPC证明了大分子引发剂和五嵌段共聚物的结构,五嵌段共聚物的GPC分析表明这种合成方法的可行.共聚物胶束的直径和大小通过动态光散射方法和原子力显微镜测试,五嵌段共聚物在水中的的自组装行为也被研究.结果证明胶束是球形,其平均直径为77 nm.聚合物在四氢呋喃中的浓度对聚合物的聚集形貌有很大的影响.     

机理转移法合成聚丁二烯-b-聚(甲基丙烯酸N,N-二甲氨基乙酯)两亲性嵌段共聚物

将活性负离子聚合与原子转移自由基聚合(ATRP)技术相结合,运用机理转移法制备了一种两亲性材料聚丁二烯-b-聚(甲基丙烯酸N,N-二甲氨基乙酯)(PB-b-PDMAEMA)嵌段共聚物.首先通过负离子聚合方法设计合成聚丁二烯,用环氧丙烷封端,2-溴异丁酰溴作酯化剂,合成具有活性端基溴的聚丁二烯大分子引发剂(PB-B r),再用其引发亲水性单体DMAEMA进行原子转移自由基聚合,聚合动力学证实了该聚合反应具有典型的活性/可控自由基聚合的特征.通过差示扫描量热法(DSC)研究嵌段共聚物的微相分离行为.制备的大分子引发剂及两亲性嵌段共聚物经凝胶色谱、红外和核磁表征证实了预定的结构.     

两亲性三嵌段共聚物PAA-PHB-PAA的合成及表征

本文用ATRP方法, 以两端溴化的聚β-羟基丁酸酯链段(Br-PHB-Br)作为大分子引发剂, 丙烯酸叔丁酯为单体, 合成了一种新的三嵌段共聚物聚丙烯酸叔丁酯-聚β-羟基丁酸酯-聚丙烯酸叔丁酯(PtBA-PHB-PtBA). 在酸性条件下进一步水解, 得到了一种两亲性的聚丙烯酸-聚β-羟基丁酸酯-聚丙烯酸(PAA-PHB-PAA)三嵌段共聚物.     

聚丙烯酸叔丁酯-b-聚(N-异丙基丙烯酰胺)嵌段共聚物的制备及其自组装

以氯化亚铜/N,N,N′,N″,N″-五甲基二乙撑三胺为催化体系、丁酮和异丙醇为混合溶剂,采用原子转移自由基聚合法制备了大分子引发剂聚丙烯酸叔丁酯(PtBA-Cl)和聚丙烯酸叔丁酯-b-聚(N-异丙基丙烯酰胺)(PtBA-b-PNIPAM)两亲性嵌段共聚物.用红外光谱和核磁共振谱表征 PtBA-b-PNIPAM 嵌段共聚物的结构,动态光散射及透射电镜研究嵌段共聚物在溶液中的温度响应性.结果表明:胶束的体积相转变温度在 33℃左右;随着温度的增加,胶柬的粒径逐渐减小.     

基于苯氧基联烯的两亲性嵌段共聚物的合成

运用机理转换策略,结合自由基聚合和原子转移自由基聚合(ATRP),制备了含有聚联烯链段的两亲性三嵌段共聚物.设计合成了含有偶氮和ATRP引发基团的双官能团引发剂,先用该双官能团引发剂引发苯氧基联烯单体的自由基聚合,得到了含有ATRP引发基团的聚联烯大分子引发剂,然后该大分子引发剂引发亲水性单体N,N-二乙基氨乙基甲基丙烯酸酯(DEAEMA)的ATRP聚合,制得了聚N,N-二乙基氨乙基甲基丙烯酸酯-聚联烯-聚N,N-二乙基氨乙基甲基丙烯酸酯(PDEAEMA-b-PPOA-b-PDEAEMA).该三嵌段共聚物能在水溶液中形成胶束,通过荧光探针技术分别测定了它在不同离子浓度、不同p H值条件下的临界胶束浓度.实验结果表明,该聚合物胶束的cmc随着p H值增大而减小,随着离子浓度的增大而增大.     

用多官能链转移剂通过普通自由基聚合制备两亲性杂臂星形聚合物

以偶氮二异丁腈为引发剂,四(3-巯基丙酸季戊四醇四酯)(PETMP)为链转移剂进行甲基丙烯酸甲酯(MMA)的自由基聚合,得到了含有残余巯基的聚甲基丙烯酸甲酯大分子链转移剂(HS-PMMA).然后,以HS-PMMA作为大分子链转移剂进行甲基丙烯酸叔丁酯(tBMA)的自由基聚合,合成了杂臂星形聚合物.最后,将所得杂臂星形聚合物的PtBMA链段水解得到了两亲性杂臂星形聚合物.     

两亲性嵌段共聚物PAA-b-PS的合成及胶束形态

通过丙烯酸叔丁酯的自由基调聚和苯乙烯的原子转移自由基聚合（ATRP）法合成了聚丙烯酸叔丁酯-聚苯乙烯（PtBA-b-PS）嵌段共聚物,然后在三氟乙酸作用下进行选择性水解得到了两亲性聚丙烯酸-聚苯乙烯（PAA-b-PS）嵌段共聚物。利用1H-NMR、FT-IR和GPC对产物的结构进行了表征。采用透析法制备了PAA-b-P...     

自组装制备聚(丙烯酸叔丁酯-b-甲基丙烯酸二甲胺基乙酯)壳交联胶束

以1-氯代乙苯为引发剂、氯化亚铜/N,N,N′,N″,N″-五甲基二乙撑三胺(PMDETA)为催化体系、丁酮-异丙醇为混合溶剂,通过原子转移自由基聚合法制备不同分子量的大分子引发剂聚丙烯酸叔丁酯(1-PECl)及不同嵌段比的两亲性嵌段共聚物聚(丙烯酸叔丁酯-b-甲基丙烯酸二甲胺基乙酯)(P(tBA-b-DMAEMA))。通过1H-NMR表征了P(tBA-b-DMAEMA)的结构,GPC测试了其分子量及分子量分布。P(tBA-b-DMAEMA)在选择性溶剂中自组装形成核-壳结构的胶束,引用了乙烯基乙二醇二碘醚(BIEE)为交联剂与链段PDMAEMA发生化学交联反应从而得到稳定的壳交联胶束结构,并通过马尔文粒径仪研究了自组装所得胶束的温度及pH敏感性。     

PTHF—MMA嵌段共聚物的合成及性质

以含偶氮聚四氢呋喃(AZO-PTHF)为大分子引发剂,通过使甲基丙烯酸甲酯(MMA)进行自由基聚合的方法合成了PTHF-MMA嵌段共聚物。用GPC、IR、H-NMR和TMA对所得共聚物进行了表征。嵌段共聚物的韧性和耐折性大大超过PMMA,但透明性和强度却无明显损失。     

生物相容性BAB型两亲嵌段共聚物的合成及其自组装

Lys(z)-NCA was synthesized in the presence of triphosgene, amphiphilic triblock copolymers poly(N^c-CBZ-Lysine)-PEG-poly(N^c-CBZ-Lysine) were synthesized in DMF using amino-end ended PEG as initiator with the mechanism of anion ring opening polymerization. The structures of block copolymers were characterized by IR, ^1H-NMR,GPC and DSC. The results showed triblock copolymers with expected structure and low polydispersity in molecular weight could be synthesized by this method. At the same time, the self-assembling behaviors of block copolymer were investigated by TEM. A novel helical aggregates were found to be formed in DMF. Because of biocompatibility of two components of block copolymers, these block copolymers have potential applications in the field of biomaterials.     

溶剂尺寸对ABA两亲性三嵌段共聚物在选择性溶剂中自组装行为影响的Monte Carlo模拟

采用Monte Carlo模拟方法研究了溶剂尺寸对ABA两亲性三嵌段共聚物在选择性溶剂中自组装行为的影响。模拟结果表明,溶剂尺寸是决定共聚物聚集形态的重要因素之一。随着溶剂尺寸的增大,嵌段共聚物自组装所形成的胶束可以发生从球状到棒状再到囊泡状的转变。通过对各组分的相互作用对数随溶剂尺寸变化曲线的分析发现,增大溶剂尺寸会使溶剂的溶解性变差,由此引发体系中的一系列形态转变。此外,通过对体系自组装形貌结构相图的分析发现,增大溶剂尺寸或增加疏水作用同减小亲水作用对于自组装形态的改变具有同等效果。     

树枝状聚(醚-酰胺)基胶束的制备及其形貌研究

采用ε-己内酯(CL)开环聚合的方法首先合成树枝状聚(醚-酰胺)基(DPEA)星形聚合物star-PCL,再与异氰酸基封端的PEG(PEG-NCO)偶合制备了两亲性树枝状聚(醚-酰胺)基星形嵌段聚合物star-PCL-b-PEG.利用FT-IR、1H-NMR和GPC分析测试手段对star-PCL-b-PEG的结构进行了表征.通过滴加选择性溶剂的方法,制备了star-PCL-b-PEG以水为介质的类似"平头"聚集体胶束溶液.采用荧光光谱法测得star-PCL-b-PEG水溶液的临界胶束浓度(CMC)为1.623mg/L;采用激光光散射仪测得其在浓度0.15mg/mL和0.5mg/mL的流体力学半径分别为86.2nm和224.6nm,其多分散指数分别为0.115和0.197.透射电镜(TEM)观察发现胶束的形貌受共溶剂的特性,初始聚合物浓度,水含量等因素的影响.     

Synthesis of pH-responsive amphiphilic diblock copolymers containing polyisobutylene via oxyanion-initiated polymerization and their multiple self-assembly morphologies

 Two pH-responsive amphiphilic diblock copolymers, namely polyisobutylene-block-poly[2-(N,N-dimethylamino)ethyl methacrylate] (PIB-b-PDMAEMA) and polyisobutylene-block-poly(metharylic acid) (PIB-b-PMAA), were synthesized via oxyanion-initiated polymerization, and their multiple self-assembly behaviors have been studied. An exo-olefin-terminated highly reactive polyisobutylene (HRPIB) was first changed to hydroxyl-terminated PIB (PIB-OH) via hydroboration-oxidation of C＝C double bond in the chain end, and then reacted with KH to yield a potassium alcoholate of PIB (PIB-O^-K⁺). PIB-O^-K⁺ was immediately used as a macroinitiator to polymerize DMAEMA monomer, resulting in a cationic diblock copolymer PIB-b-PDMAEMA. With the similar synthesis procedure, the anionic diblock copolymer PIB-b-PMAA could be prepared via a combination of oxyanion-initiated polymerization of tert-butyl methacrylate (tBMA) and subsequent hydrolysis of tert-butyl ester groups in PtBMA block. The functional PIB and block copolymers have been fully characterized by ¹H-NMR, FT-IR spectroscopy, and gel permeation chromatography (GPC). These samples allowed us to systematically investigate the effects of block composition on the pH responsivity and various self-assembled morphologies of the copolymers in THF/water mixed solvent. Transmission electron microscopy (TEM) images revealed that these diblock copolymers containing small amount of original PIB without exo-olefin-terminated group are able to self-assemble into micelles, vesicles with different particle sizes and cylindrical aggregates, depending on various factors including block copolymer composition, solvent polarity and pH value.     

Photoresponsive self‐assembling structures from a pyrene‐based triblock copolymer

A new photoresponsive amphiphilic triblock copolymer, poly(pyrenylmethyl methacrylate)‐block‐polystyrene‐block‐poly(ethylene oxide) (PPy‐b‐PSt‐b‐PEO), was synthesized using atom‐transfer radical polymerization. Formation of colloidal aggregates of the polymer was observed in solutions under controlled conditions due to the amphiphilic nature of the polymer. Irradiation of the polymer aggregates using UV light resulted in the photodissociation of 1‐pyrenemethanol units from the polymer back‐bone resulting in break‐up of the aggregates mainly due to the hydrophilic nature of the residual polymer. The use of these polymer aggregates to trap hydrophobic fluorescent dyes in water and its controlled release on exposure to UV light has also been explored. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011