共查询到19条相似文献,搜索用时 78 毫秒
1.
利用同步辐射高能X光散射的方法,研究了室温下非晶合金Ni77P23的自由体积的变化所引起的压缩行为的变化规律,通过傅里叶变换得到不同压力下的径向分布函数,并由此获得了不同压力下,该非晶合金的配位数、近邻原子间距等原子构型的结构信息. 研究表明,至直30.5GPa压力,Ni77P23合金仍保持稳定的非晶结构,根据Bridgman方程通过拟合数据,得到状态方程为-ΔV/V0=0.08606P-3.2×10-4P2+5.7×10-6P3.
关键词:
非晶合金
自由体积
同步辐射 相似文献
2.
将Zr55All0Ni5Cu30块体非晶合金在715K等温退火30min,引入少量纳米晶,然后于室温以不同的应变速率进行轧制,用差示扫描量热仪考察不同应变量样品的热稳定性和自由体积演化.结果表明:即使轧制到95%的最大应变量,样品的热稳定性也几乎没有发生改变.在各种应变速率下,随着应变量的增加,自由体积含量持续上升.但随着应变速率的增加,相同应变量下自由体积的含量先上升后降低,该规律与单一非晶态结构合金在塑性变形过程中自由体积的变化情况截然不同. 相似文献
4.
5.
铀基非晶合金是非晶家族中的特殊成员,受限于铀元素的高活性与放射性特点,目前这类非晶材料的研究极不充分.本文结合非晶合金的最新发展动态简要介绍了铀基非晶发展历史,较系统地总结了本团队的最新铀基非晶研究工作:首先较详细地介绍了新型铀基非晶的制备技术、成分体系、形成规律与晶化行为,澄清了其形成机制与热稳定性;结合高分辨电镜分析展示了其微观结构特点;采用纳米压痕技术揭示了这类非晶的微纳力学性能;利用电化学测试方法评估了其耐腐蚀性能.这些结果丰富了非晶材料的内涵,有助于深化对非晶物理基础科学问题的理解,并推动新型铀合金材料的发展,为这种材料的潜在工程应用奠定了基础. 相似文献
6.
7.
8.
利用电化学沉积方法在阳极氧化铝模板中制备了Fe89.7P10.3非晶合金纳米线阵列.利用x射线衍射仪、透射电子显微镜、振动样品磁强计和穆斯堡尔谱仪研究了样品的结构和磁性,发现纳米线阵列是非晶结构,且拥有垂直磁各向异性和高的矫顽力,Hc=3.04×104A/m.纳米线内部的平均超精细场和平均同质异能移分别为2.15×106 A/m和0.07 mm/s;而纳米线末端的平均超精细场(2.33×106A/m)大于内部的值,平均同质异能移(0.04mm/s)小于内部的值.另外,纳米线内部Fe原子磁矩与线轴的夹角约为16°,而在纳米线末端Fe原子磁矩与线轴的夹角约为28°.这些结果表明,由于形状各向异性,在纳米线中实现了无序非晶合金磁矩的有序排列. 相似文献
9.
本文用正电子湮没技术对超高分子量聚乙烯退火处理后的结构进行了研究。用PATFIT-88软件件分析了正电子湮没谱,给出了在100℃条件下,样品的结晶度。自由体积和自由体积分数随退火的变化。实验证明,结晶度.自由体积和自由体积分数在退火初期变化最快,随着退火时间增加变化趋于平缓。这一结果与Wunderlich提出的理论相一致。 相似文献
10.
11.
12.
13.
Pure metal powder mixtures of W and Mg at the desired composition were milled in conventional high-energy ball mill, and amorphous alloy W50Mg50 was obtained after milling for 20 h. The structure evolution of elemental powder mixtures was studied following milling and subsequent high pressure and high temperature treatment. The amorphous alloy transform into a nanocrystalline material below 1050 °C at 4.0 GPa. On increasing the temperature, it transforms into a mixture of several new crystal phases under high-pressure condition. It also found that both mechanical alloying and high pressure treatment are the two necessary processes to form the nanocrystalline and the new phases. 相似文献
14.
15.
Abstract A new program has been developed for the conversion of energy-dispersive x-ray diffraction spectra obtained from powder samples at high pressure in a diamond anvil cell (DAC) into conventional pseudo angle-dispersive data. The program is compatible with a conventional Rietveld program. This allows the determination of the structural parameters of the samples investigated. Results of a synchrotron radiation study of polycrystalline SrFCl in the tetragonal phase at high pressure are presented. Presented at the IUCr Workshop on ‘Synchrotron Radiation Instrumentation for High Pressure Crystallography’, Daresbury Laboratory 20-21 July 1991 相似文献
16.
同步辐射X射线光源已经成功地应用到高压科学研究的诸多领域.文章简要回顾了同步辐射高压技术的发展历史,简要介绍了同步辐射X射线衍射技术在高压状态方程、强关联体系、地球内部物质以及早期生命起源等研究中的应用.介绍了同步辐射X射线光谱技术(包括晶格振动声子谱的测量)在高压研究中的应用,此外,还介绍了时间分辨的同步辐射技术在冲击压缩研究中的应用,最后展望了未来先进光源应用于高压科学研究的前景. 相似文献
17.
同步辐射X射线光源已经成功地应用到高压科学研究的诸多领域. 文章简要回顾了同步辐射高压技术的发展历史,简要介绍了同步辐射X射线衍射技术在高压状态方程、强关联体系、地球内部物质以及早期生命起源等研究中的应用.介绍了同步辐射X射线光谱技术(包括晶格振动声子谱的测量)在高压研究中的应用,此外, 还介绍了时间分辨的同步辐射技术在冲击压缩研究中的应用,最后展望了未来先进光源应用于高压科学研究的前景. 相似文献
18.
T. M. Poletika S. L. Girsova A. N. Shmakov 《Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques》2012,6(3):408-412
Synchrotron radiation X-ray diffraction has been applied for the precision study of the micro-structure evolution of a Zr-1% Nb alloy deformed by uniaxial tension. A nonmonotonic pattern of the integral width of X-ray lines as a function of in situ deformation and acting stress has been revealed, which is in agreement with intensity fluctuations of reflections and elastic microdistortions related to structural imperfection. The obtained results correlate with transmission electron microscopy data on the cyclicity of dislocation transformations during necking. 相似文献
19.
Abstract A single crystal study on AlPO4 was performed at 2.90 GPa with synchrotron radiation with a wavelength of only 0.54 ?. The diffracted intensity was high enough to measure even weak reflections with sufficient counting statistics. However, the search for the reflections needed to setup the orientation matrix required a lot of beamtime. A feasibility study was carried out using a proportional area counter to reduce this search time. The results demonstrate that such counters can considerably reduce the time needed for the orientation of the crystal and the data collection. Presented at the IUCr Workshop on ‘Synchrotron Radiation Instrumentation for High Pressure Crystallography’. Daresbury Laboratory 20-21 July 1991 相似文献