A top-down approach to protein structure studies using chemical cross-linking and Fourier transform mass spectrometry

In a preliminary communication we described a top-down approach to the determination of chemical cross-link location in proteins using Fourier transform mass spectrometry (FT-MS). We have since extended the approach to use a series of homobifunctional cross-linkers with the same reactive functional groups, but different cross-linker arm lengths. Correlating cross-linking data across a series of related linkers allows the distance constraint derived from a cross-link between two reactive side chains to be determined more accurately and increases the confidence in the assignment of the cross-links. In ubiquitin, there are seven lysines with primary amino groups and the amino terminus. Disuccinimidyl suberate (DSS, cross-linker arm length = 11.4 A), disuccinimidyl glutarate (DSG, cross-linker arm length = 7.5 A) and disuccinimidyl tartrate (DST, cross- linker arm length = 5.8 A) are homobifunctional cross-linking reagents that react specifically with primary amines. Using tandem mass spectrometry (MS/MS) on the singly, internally cross-linked precursor ion of ubiquitin, we found cross-links with DSS and DSG between the amino terminus and Lys 6, between Lys 6 and Lys 11, and between Lys 63 and Lys 48. Using disuccinimidyl tartrate (DST), the shortest cross-linker in the series, only the cross-links between the amino terminus and Lys 6, and between Lys 6 and Lys 11 were observed. The observed cross-links are consistent with the crystal structure of ubiquitin, if the lysine side chains and the amino terminus are assumed to have considerable flexibility. In a separate study, we probed the reactivity of the primary amino groups in ubiquitin using the amino acetylating reagent, N-hydroxy succinimidyl acetate (NHSAc), and a top-down approach to localize the acetylated lysine residues. The reactivity order obtained in that study (M1 approximate, equals K6 approximate, equals K48 approximate, equals K63) > K33 > K11 > (K27, K29), shows that the cross-link first formed in ubiquitin by reaction with DSS and DSG occurs between the most reactive residues.     

Ion mobility-mass spectrometry analysis of isomeric carbohydrate precursor ions

The rapid separation of isomeric precursor ions of oligosaccharides prior to their analysis by mass spectrometry to the nth power (MS ⁿ ) was demonstrated using an ambient pressure ion mobility spectrometer (IMS) interfaced with a quadrupole ion trap. Separations were not limited to specific types of isomers; representative isomers differing solely in the stereochemistry of sugars, in their anomeric configurations, and in their overall branching patterns and linkage positions could be resolved in the millisecond time frame. Physical separation of precursor ions permitted independent mass spectra of individual oligosaccharide isomers to be acquired to at least MS³, the number of stages of dissociation limited only practically by the abundance of specific product ions. IMS–MS ⁿ analysis was particularly valuable in the evaluation of isomeric oligosaccharides that yielded identical sets of product ions in tandem mass spectrometry experiments, revealing pairs of isomers that would otherwise not be known to be present in a mixture if evaluated solely by MS dissociation methods alone. A practical example of IMS–MSⁿ analysis of a set of isomers included within a single high-performance liquid chromatography fraction of oligosaccharides released from bovine submaxillary mucin is described.     

Investigation of the carrier function of polypeptides. Synthesis,conformation and cytotoxicity of oxazolone conjugates of poly(Lys) and poly[Lys-(DL-ALAm)]

A new group of synthetic macromolecular conjugates was synthesised in which poly(Lys) or a branched polypeptide poly[Lys-(DL-Ala_m)] (m≅3) were used as carrier and 4-(ethoxymethylene)-2–phenyl–5 (4H)-oxazolone as hapten. These conjugates were characterized by amino acid analysis, identification of terminal residues of the side chain, sedimentation analysis. The conformation of conjugates and of carrier polypeptides were analyzed by circular dichroism spectroscopy in water solutions at various pH and ionic strengths. These data indicated a marked dependence of the conformation of the conjugate on the structure of carrier and on the number of the side chain terminal haptens (phOx). In vitro cytotoxicity of these polymers was also investigated using two different assays, by measuring the viability of isolated rat liver cells and the effect on growth of HeLa cells. Toxicity of polypeptides could be diminished by conjugates containing a higher amount of oxazolone. These conjugates with defined conformation and toxicological properties are considered suitable to analyse the carrier function of branched polypeptides, particularly the interaction with the immunological network.     

Nonenzymatic assembly of natural polyubiquitin chains of any linkage composition and isotopic labeling scheme

Polymeric chains made of a small protein ubiquitin act as molecular signals regulating a variety of cellular processes controlling essentially all aspects of eukaryotic biology. Uncovering the mechanisms that allow differently linked polyubiquitin chains to serve as distinct molecular signals requires the ability to make these chains with the native connectivity, defined length, linkage composition, and in sufficient quantities. This, however, has been a major impediment in the ubiquitin field. Here, we present a robust, efficient, and widely accessible method for controlled iterative nonenzymatic assembly of polyubiquitin chains using recombinant ubiquitin monomers as the primary building blocks. This method uses silver-mediated condensation reaction between the C-terminal thioester of one ubiquitin and the ε-amine of a specific lysine on the other ubiquitin. We augment the nonenzymatic approaches developed recently by using removable orthogonal amine-protecting groups, Alloc and Boc. The use of bacterially expressed ubiquitins allows cost-effective isotopic enrichment of any individual monomer in the chain. We demonstrate that our method yields completely natural polyubiquitin chains (free of mutations and linked through native isopeptide bonds) of essentially any desired length, linkage composition, and isotopic labeling scheme, and in milligram quantities. Specifically, we successfully made Lys11-linked di-, tri-, and tetra-ubiquitins, Lys33-linked diubiquitin, and a mixed-linkage Lys33,Lys11-linked triubiquitin. We also demonstrate the ability to obtain, by high-resolution NMR, residue-specific information on ubiquitin units at any desired position in such chains. This method opens up essentially endless possibilities for rigorous structural and functional studies of polyubiquitin signals.     

A top-down method for the determination of residue-specific solvent accessibility in proteins

We present a method employing top-down Fourier transform mass spectrometry (FTMS) for the rapid profiling of amino acid side-chain reactivity. The reactivity of side-chain groups can be used to infer residue-specific solvent accessibility and can also be used in the same way as H/D exchange reactions to probe protein structure and interactions. We probed the reactivity of the N-terminal and epsilon-lysine amino groups of ubiquitin by reaction with N-hydroxysuccinimidyl acetate (NHSAc), which specifically acetylates primary amines. Using a hybrid Q-FTMS instrument, we observed several series of multiply acetylated ubiquitin ions that varied with the NHSAc:protein stoichiometry. We isolated and fragmented each member of the series of acetylated ubiquitin ions in the front end of the instrument and measured the fragment ion masses in the FTMS analyzer cell to determine which residue positions were modified. As we increased the NHSAc:protein stoichiometric ratio, identification of the fragments from native protein and protein with successively increasing modification allowed the assignment of the complete order of reactivity of the primary amino groups in ubiquitin (Met 1 approximately Lys 6 approximately Lys 48 approximately Lys 63>Lys 33>Lys 11>Lys 27, Lys 29). These results are in excellent agreement with the reactivity expected from other studies and predicted from the known crystal structure of ubiquitin. The top-down approach eliminates the need for proteolytic digestion, high-performance liquid chromatographic separations and all other chemical steps except the labeling reaction, making it rapid and amenable to automation using small quantities of protein.     

Probing affinity and ubiquitin linkage selectivity of ubiquitin-binding domains using mass spectrometry

Non-covalent interactions between ubiquitin (Ub)-modified substrates and Ub-binding domains (UBDs) are fundamental to signal transduction by Ub receptor proteins. Poly-Ub chains, linked through isopeptide bonds between internal Lys residues and the C-terminus of Ub, can be assembled with varied topologies to mediate different cellular processes. We have developed and applied a rapid and sensitive electrospray ionization-mass spectrometry (ESI-MS) method to determine isopeptide linkage-selectivity and affinity of poly-Ub·UBD interactions. We demonstrate the technique using mono-Ub and poly-Ub complexes with a number of α-helical and zinc-finger (ZnF) UBDs from proteins with roles in neurodegenerative diseases and cancer. Affinities in the 2-200 μM range were determined to be in excellent agreement with data derived from other biophysical techniques, where available. Application of the methodology provided further insights into the poly-Ub linkage specificity of the hHR23A-UBA2 domain, confirming its role in Lys48-linked poly-Ub signaling. The ZnF UBP domain of isopeptidase-T showed no linkage specificity for poly-Ub chains, and the Rabex-5 MIU also exhibited little or no specificity. The discovery that a number of domains are able to bind cyclic Lys48 di-Ub with affinities similar to those for the acyclic form indicates that cyclic poly-Ub may be capable of playing a role in Ub-signaling. Detection of a ternary complex involving Ub interacting simultaneously with two different UBDs demonstrated the co-existence of multi-site interactions, opening the way for the study of crosstalk between individual Ub-signaling pathways.     

Ion characterisation by comparison of ion mobility spectrometry and mass spectrometry data

The major uncertainty related to ion mobility spectrometry is the lack of knowledge about the characteristics of the ions detected. When using a radioactive atmospheric pressure ionisation source (e.g. ⁶³Ni), from theory proton bound water clusters are expected as reactant ions. When analyte ions occur, proton transfer should lead to proton-bound monomer and dimer ions. To increase the knowledge about those ionisation processes in an ion mobility spectrometer (IMS), a ß-radiation ionisation source was coupled to a mass spectrometer (MS) and an identical one to an IMS. Exemplarily, acetone, limonene and 2- and 5-nonanone were introduced into both instruments in varying concentrations. By correlating the MS and IMS spectra, conclusions about the identities of the ions detected by IMS could be drawn. Proton-bound monomer, dimer and even trimer ions (MH⁺, 2MH⁺, 3MH⁺) could be observed in the MS spectra for acetone and 5-nonanone and could be assigned to the related signals detected by IMS. The oligomers could be expected from theory for increasing concentration. Limonene and 2-nonanone yielded in a variety of different ions and fragments indicating complex gas phase ion chemistry. Those findings on the obviously different behaviour of different analytes require further research focussed on the ion chemistry in IMS including the comparison of different ionisation sources.     

Novel molecular tumour classification using MALDI–mass spectrometry imaging of tissue micro-array

The development of tissue micro-array (TMA) technologies provides insights into high-throughput analysis of proteomics patterns from a large number of archived tumour samples. In the work reported here, matrix-assisted laser desorption/ionisation–ion mobility separation–mass spectrometry (MALDI–IMS–MS) profiling and imaging methodology has been used to visualise the distribution of several peptides and identify them directly from TMA sections after on-tissue tryptic digestion. A novel approach that combines MALDI–IMS–MSI and principal component analysis–discriminant analysis (PCA–DA) is described, which has the aim of generating tumour classification models based on protein profile patterns. The molecular classification models obtained by PCA–DA have been validated by applying the same statistical analysis to other tissue cores and patient samples. The ability to correlate proteomic information obtained from samples with known and/or unknown clinical outcome by statistical analysis is of great importance, since it may lead to a better understanding of tumour progression and aggressiveness and hence improve diagnosis, prognosis as well as therapeutic treatments. The selectivity, robustness and current limitations of the methodology are discussed.     

Ion mobility spectrometry – Mass spectrometry coupling for synthetic polymers

This review covers applications of ion mobility spectrometry (IMS) hyphenated to mass spectrometry (MS) in the field of synthetic polymers. MS has become an essential technique in polymer science, but increasingly complex samples produced to provide desirable macroscopic properties of high‐performance materials often require separation of species prior to their mass analysis. Similar to liquid chromatography, the IMS dimension introduces shape selectivity but enables separation at a much faster rate (milliseconds vs minutes). As a post‐ionization technique, IMS can be hyphenated to MS to perform a double separation dimension of gas‐phase ions, first as a function on their mobility (determined by their charge state and collision cross section, CCS), then as a function of their m/z ratio. Implemented with a variety of ionization techniques, such coupling permits the spectral complexity to be reduced, to enhance the dynamic range of detection, or to achieve separation of isobaric ions prior to their activation in MS/MS experiments. Coupling IMS to MS also provides valuable information regarding the 3D structure of polymer ions in the gas phase and regarding how to address the question of how charges are distributed within the structure. Moreover, the ability of IMS to separate multiply charged species generated by electrospray ionization yields typical IMS‐MS 2D maps that permit the conformational dynamics of synthetic polymer chains to be described as a function of their length.     

Biochemical properties of K11,48-branched ubiquitin chains

The affinities of chemically synthetic linkage- and length-defined K_11,48-branched ubiquitin chains binding to ubiquitin receptor S5a were quantitatively measured. Proteasome-associated deubiquitinase Rpn11 showed a higher activity towards K_11,48-branched ubiquitin chains.     

Peak assignment in multi-capillary column–ion mobility spectrometry using comparative studies with gas chromatography–mass spectrometry for VOC analysis

Over the past years, ion mobility spectrometry (IMS) as a well established method within the fields of military and security has gained more and more interest for biological and medical applications. This highly sensitive and rapid separation technique was crucially enhanced by a multi-capillary column (MCC), pre-separation for complex samples. In order to unambiguously identify compounds in a complex sample, like breath, by IMS, a reference database is mandatory. To obtain a first set of reference data, 16 selected volatile organic substances were examined by MCC-IMS and comparatively analyzed by the standard technique for breath research, thermal desorption–gas chromatography–mass spectrometry. Experimentally determined MCC and GC retention times of these 16 compounds were aligned and their relation was expressed in a mathematical function. Using this function, a prognosis of the GC retention time can be given very precisely according to a recorded MCC retention time and vice versa. Thus, unknown MCC-IMS peaks from biological samples can be assigned—after alignment via the estimated GC retention time—to analytes identified by GC/MS from equivalent accomplished data. One example of applying the peak assignment strategy to a real breath sample is shown in detail.     

Improvement using chemometrics in ion mobility coupled to mass spectrometry as a tool for mass spectrometry fragmentation studies: Flavonoid aglycone cases

A chemometric method for the treatment of ion mobility coupled to mass spectrometry (IMS/MS) data is proposed as a complementary tool for obtaining experimental evidence for the study of MS fragmentations, which can provide a direct and automatable methodology for characterising ionic series and the hierarchy of all product ions of an MS spectrum.     

Optimum collision energies for proteomics: The impact of ion mobility separation

Ion mobility spectrometry (IMS) is a widespread separation technique used in various research fields. It can be coupled to liquid chromatography–mass spectrometry (LC–MS/MS) methods providing an additional separation dimension. During IMS, ions are subjected to multiple collisions with buffer gas, which may cause significant ion heating. The present project addresses this phenomenon from the bottom-up proteomics point of view. We performed LC–MS/MS measurements on a cyclic ion mobility mass spectrometer with varied collision energy (CE) settings both with and without IMS. We investigated the CE dependence of identification score, using Byonic search engine, for more than 1000 tryptic peptides from HeLa digest standard. We determined the optimal CE values—giving the highest identification score—for both setups (i.e., with and without IMS). Results show that lower CE is advantageous when IMS separation is applied, by 6.3 V on average. This value belongs to the one-cycle separation configuration, and multiple cycles may supposedly have even larger impact. The effect of IMS is also reflected in the trends of optimal CE values versus m/z functions. The parameters suggested by the manufacturer were found to be almost optimal for the setup without IMS; on the other hand, they are obviously too high with IMS. Practical consideration on setting up a mass spectrometric platform hyphenated to IMS is also presented. Furthermore, the two CID (collision induced dissociation) fragmentation cells of the instrument—located before and after the IMS cell—were also compared, and we found that CE adjustment is needed when the trap cell is used for activation instead of the transfer cell. Data have been deposited in the MassIVE repository (MSV000090944).     

Multidimensional Mass Spectrometry of Synthetic Polymers and Advanced Materials

Multidimensional mass spectrometry interfaces a suitable ionization technique and mass analysis (MS) with fragmentation by tandem mass spectrometry (MS²) and an orthogonal online separation method. Separation choices include liquid chromatography (LC) and ion‐mobility spectrometry (IMS), in which separation takes place pre‐ionization in the solution state or post‐ionization in the gas phase, respectively. The MS step provides elemental composition information, while MS² exploits differences in the bond stabilities of a polymer, yielding connectivity and sequence information. LC conditions can be tuned to separate by polarity, end‐group functionality, or hydrodynamic volume, whereas IMS adds selectivity by macromolecular shape and architecture. This Minireview discusses how selected combinations of the MS, MS², LC, and IMS dimensions can be applied, together with the appropriate ionization method, to determine the constituents, structures, end groups, sequences, and architectures of a wide variety of homo‐ and copolymeric materials, including multicomponent blends, supramolecular assemblies, novel hybrid materials, and large cross‐linked or nonionizable polymers.     

Shape changes induced by N-terminal platination of ubiquitin by cisplatin

The three-dimensional conformation of a protein is an important property and plays a key role in its biological activity. We show here that ion mobility-mass spectrometry (IM-MS) can be used to detect conformational changes in the protein ubiquitin in the gas phase induced by reaction with the anticancer drug cisplatin. The primary adduct was ubiquitin-{Pt(NH₃)₂} under denaturing conditions. Up to three different conformations appear to be generated upon platination depending on the charge state. The collision cross-sections (Ω) for each conformation indicate that the conformations of the platinated protein are contracted in size compared with unmodified ubiquitin with generally smaller Ω values. Ion mobility-tandem MS allowed determination of the platinum binding site without a requirement for prior Chromatographic separation. A rapid 30-min digestion of cisplatin-modified ubiquitin with trypsin allowed the platination site to be identified as the N-terminal methionine following low-energy collision-induced dissociation (CID) studies of the modified peptide. The data were generated using a Traveling-Wave based ion mobility-MS approach. Such cisplatin-induced shape changes may have a significant effect on its function in vivo. This work highlights the usefulness of the ion-mobility mass spectrometry technique for shedding new light on such protein interactions.     

Visualization of acetylcholine distribution in central nervous system tissue sections by tandem imaging mass spectrometry

Metabolite distribution imaging via imaging mass spectrometry (IMS) is an increasingly utilized tool in the field of neurochemistry. As most previous IMS studies analyzed the relative abundances of larger metabolite species, it is important to expand its application to smaller molecules, such as neurotransmitters. This study aimed to develop an IMS application to visualize neurotransmitter distribution in central nervous system tissue sections. Here, we raise two technical problems that must be resolved to achieve neurotransmitter imaging: (1) the lower concentrations of bioactive molecules, compared with those of membrane lipids, require higher sensitivity and/or signal-to-noise (S/N) ratios in signal detection, and (2) the molecular turnover of the neurotransmitters is rapid; thus, tissue preparation procedures should be performed carefully to minimize postmortem changes. We first evaluated intrinsic sensitivity and matrix interference using Matrix Assisted Laser Desorption/Ionization (MALDI) mass spectrometry (MS) to detect six neurotransmitters and chose acetylcholine (ACh) as a model for study. Next, we examined both single MS imaging and MS/MS imaging for ACh and found that via an ion transition from m/z 146 to m/z 87 in MS/MS imaging, ACh could be visualized with a high S/N ratio. Furthermore, we found that in situ freezing method of brain samples improved IMS data quality in terms of the number of effective pixels and the image contrast (i.e., the sensitivity and dynamic range). Therefore, by addressing the aforementioned problems, we demonstrated the tissue distribution of ACh, the most suitable molecular specimen for positive ion detection by IMS, to reveal its localization in central nervous system tissues.     

Feasibility of higher-order differential ion mobility separations using new asymmetric waveforms

Technologies for separating and characterizing ions based on their transport properties in gases have been around for three decades. The early method of ion mobility spectrometry (IMS) distinguished ions by absolute mobility that depends on the collision cross section with buffer gas atoms. The more recent technique of field asymmetric waveform IMS (FAIMS) measures the difference between mobilities at high and low electric fields. Coupling IMS and FAIMS to soft ionization sources and mass spectrometry (MS) has greatly expanded their utility, enabling new applications in biomedical and nanomaterials research. Here, we show that time-dependent electric fields comprising more than two intensity levels could, in principle, effect an infinite number of distinct differential separations based on the higher-order terms of expression for ion mobility. These analyses could employ the hardware and operational procedures similar to those utilized in FAIMS. Methods up to the 4th or 5th order (where conventional IMS is 1st order and FAIMS is 2nd order) should be practical at field intensities accessible in ambient air, with still higher orders potentially achievable in insulating gases. Available experimental data suggest that higher-order separations should be largely orthogonal to each other and to FAIMS, IMS, and MS.     

An ion mobility spectrometry/mass spectrometry (IMS/MS) study of the site of protonation in anilines

Ion mobility spectrometry (IMS) and IMS/MS techniques were used to differentiate between nitrogenprotonated and carbon-protonated anilines, both of which coexist under the conditions of the IMS. Analysis of the results led to the conclusion that the former species had lower mobilities than the latter. This was attributed mainly to charge delocalization in the ring-protonated species, which results in a weaker interaction with the drift gas molecules. Furthermore,meta-alkyl substitution enhanced ring protonation, while in 2-chloroaniline the nitrogenprotonated species was predominant, as expected.     

Comparison of differential mobility spectrometry and mass spectrometry for gas chromatographic detection of ignitable liquids from fire debris using projected difference resolution

The significance of forensic arson analysis accelerates the applications of new technologies in this area. Based on the previously reported application of differential mobility spectrometry (DMS) as a detection method for gas chromatography (GC) in arson analysis, the performances of DMS and mass spectrometry (MS) were compared using a novel chemometric tool, projected difference resolutions (PDRs). The PDR results show that one-way mass spectra data exhibit higher resolution than DMS data, while total ion chromatograms from GC–DMS show higher resolution than that from GC/MS for differentiating seven kinds of ignitable liquids. Combining the information from both chromatography and spectra, two-way data always have higher resolution than one-way data for these two detection methods, and GC/MS would exhibit better performance than GC–DMS according to the minimum resolution value. To verify the PDR results, a fuzzy rule-building expert system was applied for classifying these seven kinds of ignitable liquids from fire debris based on GC–DMS and GC/MS data, respectively. The prediction accuracies were consistent with PDR results, which proved that PDR is a powerful tool in comparing the performances of different analysis methods for pattern recognition. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Characterization of volatile metabolites formed by molds on barley by mass and ion mobility spectrometry

The contamination of barley by molds on the field or in storage leads to the spoilage of grain and the production of mycotoxins, which causes major economic losses in malting facilities and breweries. Therefore, on‐site detection of hidden fungus contaminations in grain storages based on the detection of volatile marker compounds is of high interest. In this work, the volatile metabolites of 10 different fungus species are identified by gas chromatography (GC) combined with two complementary mass spectrometric methods, namely, electron impact (EI) and chemical ionization at atmospheric pressure (APCI)‐mass spectrometry (MS). The APCI source utilizes soft X‐radiation, which enables the selective protonation of the volatile metabolites largely without side reactions. Nearly 80 volatile or semivolatile compounds from different substance classes, namely, alcohols, aldehydes, ketones, carboxylic acids, esters, substituted aromatic compounds, alkenes, terpenes, oxidized terpenes, sesquiterpenes, and oxidized sesquiterpenes, could be identified. The profiles of volatile and semivolatile metabolites of the different fungus species are characteristic of them and allow their safe differentiation. The application of the same GC parameters and APCI source allows a simple method transfer from MS to ion mobility spectrometry (IMS), which permits on‐site analyses of grain stores. Characterization of IMS yields limits of detection very similar to those of APCI‐MS. Accordingly, more than 90% of the volatile metabolites found by APCI‐MS were also detected in IMS. In addition to different fungus genera, different species of one fungus genus could also be differentiated by GC‐IMS.