Insertion reactions of GaCp*, InCp* and In[C(SiMe3)3] into the Ru-Cl bonds of [(p-cymene)RuIICl2]2 and [Cp*RuIICl]4

The first carbonyl free ruthenium/low valent Group 13 organyl complexes are presented, obtained by insertion of ER (ER = GaCp*, InCp*, In[C(SiMe(3))(3)]) into the Ru-Cl bonds of [(p-cymene)RuCl2]2, [Cp*RuCl]4 and [Cp*RuCl2]2. The compound [(p-cymene)RuCl2]2 reacts with GaCp*, giving a variety of isolated products depending on the reaction conditions. The Ru-Ru dimers [{(p-cymene)Ru}2(GaCp*)4(mu3-Cl)2] and the intermediate [{(p-cymene)Ru}2(mu-Cl)2] were isolated, as well as monomeric complexes [(p-cymene)Ru(GaCp*)3Cl2], [(p-cymene)Ru(GaCp*)2GaCl3] and [(p-cymene)Ru(GaCp*)2Cl2(DMSO)]. The reaction of [Cp*RuCl]4 with ER gives "piano-stool" complexes of the type [Cp*Ru(ER)3Cl](ER = InCp*, In[C(SiMe3)3], GaCp*. The chloride ligand in complex can be removed by NaBPh4, yielding [Cp*Ru(GaCp*)3]+[BPh4]-. The reaction of [Cp*RuCl2]2 with GaCp* however, does not lead to an insertion product, but to the ionic Ru(II) complex [Cp*Ru(GaCp*)3]+[Cp*GaCl3]-. The ER ligands in complexes 3, 5, 6, 7 and 8 are equivalent on the NMR timescale in solution due to a chloride exchange between the three Group 13 atoms even at low temperatures. The solid state structures, however, exhibit a different structural pattern. The chloride ligands exhibit two coordination modes: either terminal or bridging. The new compounds are fully characterized including single crystal X-ray diffraction. These results point out the different reactivities of the two precursors and the nature of the neutral p-cymene and the anionic Cp* ligand when bonding to a Ru(II) centre.     

Self-assembled organometallic [12]metallacrown-3 complexes

The reaction of [(arene)RuCl2]2 (arene = C6H6, cymene, C6H3Et3, or C6Me6) or [Cp*RhCl2]2 with 3-hydroxy-2-pyridone in the presence of Cs2CO3 gives trinuclear metallamacrocyclic complexes. The self-assembly process was shown to be completely diastereoselective, and a racemic mixture of complexes with M(R)M(R)M(R) or MsMsMs (M=Ru, Rh) configuration was obtained. Plausible mononuclear intermediates of the formula [(arene)RuCl(C5H4NO2)] (arene = cymene, C6Me6) have been isolated and characterized. A structurally related trimer was synthesized by using [(cymene)RuCl2]2 and 3-acetamido-2-pyridone instead of 3-hydroxy-2-pyridone. The macrocycles were shown to be highly potent ionophores for Na+ and/or Li+ with negligible affinities for the larger cation K+. The selectivities of the receptors depend on the pi-ligand present: whereas the (C6H6)Ru- and (cymene)Ru complexes bind both Li+ and Na+, the (C6Me6)Ru-, (C6H3Et3)Ru-, and Cp*Rh complexes bind exclusively Li+. For all receptors, the presence of alkali metal ions can be detected electrochemically: the peak potential is shifted by > 300 mV toward anionic potential upon binding. This behavior was utilized to detect Li+ and Na+ colorimetrically. Single crystal X-ray analyses have been carried out on eight complexes, four of which are bound to an alkali metal halide ion pair. Structural parameters, which affect the affinity and selectivity are discussed. A computational study on [[MX][12]crown-3] complexes (M =Li, Na; X=Cl, Br, I) was performed in order to compare relevant bond lengths and angles of the energy-minimized structures with those of the organometallic receptors.     

Preparation, structure, and ethylene polymerization behavior of half-sandwich picolyl-functionalized carborane iridium, ruthenium, and rhodium complexes

The synthesis of half-sandwich transition-metal complexes containing the Cab(N) and Cab(N,S) chelate ligands (HCab(N) = HC2B10H10CH2C5H4N (1), LiCab(N,S) = LiSC2B10H10CH2C5H4N (4)) is described. Compounds 1 and 4 were treated with chloride-bridged dimers [{Ir(Cp*)Cl2}2] (Cp* = eta5-C5Me5), [{Ru(p-cymene)Cl2}2] and [{Rh(Cp*)Cl2}2] to give half-sandwich complexes [Ir(Cp*)Cl(Cab(N))] (2), [Ru(p-cymene)Cl(Cab(N))] (3), and [Rh(Cp*)Cl(Cab(N,S))] (5), respectively. Addition reaction of LiCab(S) (Cab(S) = SC2(H)B10H10) to the rhodium complex 5 yields [Rh(Cp*)(Cab(S))(Cab(N,S))] (6). All the complexes were characterized by IR and NMR spectroscopy, and by elemental analysis. In addition, X-ray structure analyses were performed on complexes 2, 3, 5, and 6, in which the potential C,N- and N,S-chelate ligands were found to coordinate in a bidentate mode. The carborane complex 2 shows catalytic activities up to 3.7x10(5) g PE mol(-1) Ir h(-1) for the polymerization of ethylene in the presence of methylaluminoxane (MAO) as cocatalyst. The polymer obtained from this homogeneous catalytic reaction has a spherical morphology. Catalytic activities and the molecular weight of polyethylene have been investigated for various reaction conditions.     

Synthesis and intramolecular and interionic structural characterization of half-sandwich (arene)ruthenium(II) derivatives of bis(pyrazolyl)alkanes

Arene ruthenium(II) complexes containing bis(pyrazolyl)methane ligands have been prepared by reacting the ligands L' (L' in general; specifically L(1) = H(2)C(pz)(2), L(2) = H(2)C(pz(Me2))(2), L(3) = H(2)C(pz(4Me))(2), L(4) = Me(2)C(pz)(2) and L(5) = Et(2)C(pz)(2) where pz = pyrazole) with [(arene)RuCl(mu-Cl)](2) dimers (arene = p-cymene or benzene). When the reaction was carried out in methanol solution, complexes of the type [(arene)Ru(L')Cl]Cl were obtained. When L(1), L(2), L(3), and L(5) ligands reacted with excess [(arene)RuCl(mu-Cl)](2), [(arene)Ru(L')Cl][(arene)RuCl(3)] species have been obtained, whereas by using the L(4) ligand under the same reaction conditions the unexpected [(p-cymene)Ru(pzH)(2)Cl]Cl complex was recovered. The reaction of 1 equiv of [(p-cymene)Ru(L')Cl]Cl and of [(p-cymene)Ru(pzH)(2)Cl]Cl with 1 equiv of AgX (X = O(3)SCF(3) or BF(4)) in methanol afforded the complexes [(p-cymene)Ru(L')Cl](O(3)SCF(3)) (L' = L(1) or L(2)) and [(p-cymene)Ru(pzH)(2)Cl]BF(4), respectively. [(p-cymene)Ru(L(1))(H(2)O)][PF(6)](2) formed when [(p-cymene)Ru(L(1))Cl]Cl reacts with an excess of AgPF(6). The solid-state structures of the three complexes, [(p-cymene)Ru{H(2)C(pz)(2)}Cl]Cl, [(p-cymene)Ru{H(2)Cpz(4Me))(2)}Cl]Cl, and [(p-cymene)Ru{H(2)C(pz)(2)}Cl](O(3)SCF(3)), were determined by X-ray crystallographic studies. The interionic structure of [(p-cymene)Ru(L(1))Cl](O(3)SCF(3)) and [(p-cymene)Ru(L')Cl][(p-cymene)RuCl(3)] (L' = L(1) or L(2)) was investigated through an integrated experimental approach based on NOE and pulsed field gradient spin-echo (PGSE) NMR experiments in CD(2)Cl(2) as a function of the concentration. PGSE NMR measurements indicate the predominance of ion pairs in solution. NOE measurements suggest that (O(3)SCF(3))(-) approaches the cation orienting itself toward the CH(2) moiety of the L(1) (H(2)C(pz)(2)) ligand as found in the solid state. Selected Ru species have been preliminarily investigated as catalysts toward styrene oxidation by dihydrogen peroxide, [(p-cymene)Ru(L(1))(H(2)O)][PF(6)](2) being the most active species.     

Interplay of cubic building blocks in (et6-arene)ruthenium-containing tungsten and molybdenum oxides

A series of molybdenum and tungsten organometallic oxides containing [Ru(arene)]2+ units (arene =p-cymene, C6Me6) was obtained by condensation of [[Ru(arene)Cl2]2] with oxomolybdates and oxotungstates in aqueous or nonaqueous solvents. The crystal structures of [[Ru(eta6-C6Me6]]4W4O16], [[Ru(eta6-p-MeC6H4iPr]]4W2O10], [[[Ru-(eta6-p-MeC6H4iPr)]2(mu-OH)3]2][[Ru(eta6-p-MeC6H4iPr)]2W8O28(OH)2[Ru(eta6-p-MeC6H4iPr)(H2O)]2], and [[Ru(eta6-C6Me6)]2M5O18[Ru(eta6-C6Me6)(H2O)]] (M = Mo, W) have been determined. While the windmill-type clusters [[Ru(eta6-arene)]4(MO3)4(mu3-O)4] (M = Mo, W; arene =p-MeC6H4iPr, C6Me6), the face-sharing double cubane-type cluster [[Ru(eta6-p-MeC6H4iPr)]4(WO2)2(mu3-O)4(mu4-O)2], and the dimeric cluster [[Ru(eta6-p-MeC6H4iPr)(WO3)3(mu3-O)3(mu3-OH)Ru(eta6-pMeC6H4iPr)(H2O)]2(mu-WO2)2]2- are based on cubane-like units, [(Ru(eta6-C6Me6)]2M5O18[Ru(eta6-C6Me6)(H2O)]] (M = Mo, W) are more properly described as lacunary Lindqvist-type polyoxoanions supporting three ruthenium centers. Precubane clusters [[Ru(eta6-arene)](MO3)2(mu-O)3(mu3-O)]6- are possible intermediates in the formation of these clusters. The cluster structures are retained in solution, except for [[Ru(eta6-p-MeC6H4iPr)]4Mo4O16], which isomerizes to the triple-cubane form.     

Connection of metallamacrocycles via dynamic covalent chemistry: a versatile method for the synthesis of molecular cages

A modular approach for the synthesis of cage structures is described. Reactions of [(arene)RuCl(2)](2) [arene = p-cymene, 1,3,5-C(6)H(3)Me(3), 1,3,5-C(6)H(3)(i-Pr)(3)] with formyl-substituted 3-hydroxy-2-pyridone ligands provide trinuclear metallamacrocycles with pendant aldehyde groups. Subsequent condensation reactions with di- and triamines give molecular cages with 3, 6, or 12 Ru centers in a diastereoselective and chemoselective (self-sorting) fashion. Some of the cages can also be prepared in one-pot reactions by mixing [(arene)RuCl(2)](2) with the pyridone ligand and the amine in the presence of base. The cages were comprehensively analyzed by X-ray crystallography. The diameter of the largest dodecanuclear complex is ～3 nm; the cavity sizes range from 290 to 740 ?(3). An amine exchange process with ethylenediamine allows the clean conversion of a dodecanuclear cage into a hexanuclear cage without disruption of the metallamacrocyclic structures.     

Organoruthenium derivative of the cyclic [H7P8W48O184]33- anion: [{K(H2O)}3{Ru(p-cymene)(H2O)}4P8W49O186(H2O)2]27-

Reaction of [Ru(p-cymene)Cl2]2 with [H7P8W48O184]33- (P8W48) in aqueous acidic medium results in the organometallic derivative [{K(H2O)}3{Ru(p-cymene)(H2O)}4P8W49O186(H2O)2]27- (1); in addition to the four {Ru(p-cymene)(H2O)} units, an unusual WO6 group with four equatorial, terminal ligands is also grafted to the crown-shaped P8W48 precursor.     

Framework fluxionality of organometallic oxides: synthesis, crystal structure, EXAFS, and DFT studies on [[Ru(eta6-arene)]4Mo4O16] complexes

Reactions of the molybdates Na(2)MoO4.2 H2O and (nBu(4)N)2[Mo2O7] with [[Ru(arene)Cl(2)](2)] (arene=C(6)H5CH3, 1,3,5-C6H3(CH3)(3), 1,2,4,5-C6H2(CH3)4) in water or organic solvents led to formation of the triple-cubane organometallic oxides [[Ru(eta(6)-arene)](4)Mo4O16], whose crystal and molecular structures were determined. Refluxing triple cubane [[Ru(eta(6)-C6H5CH3)](4)Mo4O16] in methanol caused partial isomerization to the windmill form. The two isomers of [[Ru(eta(6)-C6H5CH3)](4)Mo4O16] were characterized by Raman and Mo K-edge X-ray absorption spectroscopy (XAS), both in the solid-state and in solution. This triple-cubane isomer was also used as a spectroscopic model to account for isomerization of the p-cymene windmill [[Ru(eta(6)-1,4-CH3C6H4CH(CH3)2)](4)Mo4O16] in solution. Using both Raman and XAS techniques, we were then able to determine the ratio between the windmill and triple-cubane isomers in dichloromethane and in chloroform. Density functional calculations on [[Ru(eta(6)-arene)](4)Mo4O16] (arene=C6H6, C6H5CH3, 1,3,5-C6H3(CH3)3, 1,4-CH3C6H4CH(CH3)2, C6(CH3)6) suggest that the windmill form is intrinsically more stable, provided the complexes are assumed to be isolated. Intramolecular electrostatic interactions and steric bulk induced by substituted arenes were found to modulate but not to reverse the energy difference between the isomers. The stability of the triple-cubane isomers should therefore be accounted for by effects of the surroundings that induce a shift in the energy balance between both forms.     

Syntheses,structures, and electronic interactions of dicyanamide/tricyanomethanide-bridged binuclear organometallic complexes

Dicyanamide-bound mononuclear compounds Cp(dppe)FeN(CN)2 (3) and Cp(PPh3)2RuN(CN)2 (4) were isolated in high yields by the reactions of Cp(dppe)FeCl (1) and Cp(PPh3)2RuCl (2), respectively, with excess sodium dicyanamide. Compounds 3 and 4 are excellent precursors for the design of dicyanamide-bridged binuclear complexes [[Cp(dppe)Fe]2N(CN)2](SbF6) (5) and [[Cp(PPh3)2Ru]2N(CN)2](SbF6) (6) by the incorporation with 1 and 2, respectively. Controlling oxidation of 5 with ferrocenium hexafluorophosphate afforded the mixed-valence compound [[Cp(dppe)Fe]2N(CN)2](PF6)2 (5a) which exhibits a broad absorption band in the near-infrared region (centered at 1500 nm, epsilon = 750 cm-1 M-1) due to the intervalence charge transfer of Robin and Day class II mixed-valence system. Tricyanomethanide-bound mononuclear compounds Cp(dppe)FeC(CN)3 (7) and Cp(PPh3)2RuC(CN)3 (8) were prepared by the same methods as 3 and 4 using potassium tricyanomethanide as the starting material instead. The tricyanomethanide-bridged binuclear complexes [[Cp(dppe)Fe]2C(CN)3](CF3SO3) (9) and [[Cp(PPh3)2- Ru]2C(CN)3](SbF6) (10) were prepared by the reactions between 7 and 1 and between 8 and 2, respectively. Cyclic voltammograms of the dicyanamide/tricyanomethanide-bridged binuclear complexes showed stepwise reversible one-electron oxidation waves with the potential separation of the two redox couples in the range 0.14-0.25 V, indicating the demonstrably electronic communication is operative between the organometallic components through a dicyanamide/tricyanomethanide spacer with metal...metal distances more than 7.8 A. Furthermore, the electronic coupling transmitted by the tricyanomethanide is appreciably greater than that by the dicyanamide. The complexes 3-10 were characterized by elemental analysis, IR, UV-vis, 1H and 31P NMR, and ES-MS. The crystal structures of 3 and 5-9 were determined by X-ray crystallography.     

Variable coordination of amine functionalised N-heterocyclic carbene ligands to Ru, Rh and Ir: C-H and N-H activation and catalytic transfer hydrogenation

Chelating amine and amido complexes of late transition metals are highly valuable bifunctional catalysts in organic synthesis, but complexes of bidentate amine-NHC and amido-NHC ligands are scarce. Hence, we report the reactions of a secondary-amine functionalised imidazolium salt 2a and a primary-amine functionalised imidazolium salt 2b with [(p-cymene)RuCl(2)](2) and [Cp*MCl(2)](2) (M = Rh, Ir). Treating 2a with [Cp*MCl(2)](2) and NaOAc gave the cyclometallated compounds Cp*M(C,C)I (M = Rh, 3; M = Ir, 4), resulting from aromatic C-H activation. In contrast, treating 2b with [(p-cymene)RuCl(2)](2), Ag(2)O and KI gave the amine-NHC complex [(p-cymene)Ru(C,NH(2))I]I (5). The reaction of 2b with [Cp*MCl(2)](2) (M = Rh, Ir), NaO(t)Bu and KI gave the amine-NHC complex [Cp*Rh(NH(2))I]I (6) or the amido-NHC complex Cp*Ir(C,NH)I (7); both protonation states of the Ir complex could be accessed: treating 7 with trifluoroacetic acid gave the amine-NHC complex [Cp*Ir(C,NH(2))I][CF(3)CO(2)] (8). These are the first primary amine- or amido-NHC complexes of Rh and Ir. Solid-state structures of the complexes 3-8 have been determined by single crystal X-ray diffraction. Complexes 5, 6 and 7 are pre-catalysts for the catalytic transfer hydrogenation of acetophenone to 1-phenylethanol, with ruthenium complex 5 demonstrating especially high reactivity.     

Phenylazo-pyridine and phenylazo-pyrazole chlorido ruthenium(II) arene complexes: arene loss, aquation, and cancer cell cytotoxicity

Ru(II) eta6-arene complexes containing p-cymene (p-cym), tetrahydronaphthalene (thn), benzene (bz), or biphenyl (bip), as the arene, phenylazopyridine derivatives (C5H4NN:NC6H5R; R = H (azpy), OH (azpy-OH), NMe2 (azpy-NMe2)) or a phenylazopyrazole derivative (NHC3H2NN:NC6H5NMe2 (azpyz-NMe2)) as N,N-chelating ligands and chloride as a ligand have been synthesized (1-16). The complexes are all intensely colored due to metal-to-ligand charge-transfer Ru 4d6-pi* and intraligand pi -->pi* transitions (eta = 5000-63 700 M-1 cm-1) occurring in the visible region. In the crystal structures of [(eta6-p-cym)Ru(azpy)Cl]PF6 (1), [(eta6-p-cym)Ru(azpy-NMe2)Cl]PF6 (5), and [(eta6-bip)Ru(azpy)Cl]PF6 (4), the relatively long Ru-N(azo) and Ru-(arene-centroid) distances suggest that phenylazopyridine and arene ligands can act as competitive pi-acceptors toward Ru(II) 4d6 electrons. The pKa* values of the pyridine nitrogens of the ligands are low (azpy 2.47, azpy-OH 3.06 and azpy-NMe2 4.60), suggesting that they are weak sigma-donors. This, together with their pi-acceptor behavior, serves to increase the positive charge on ruthenium, and together with the pi-acidic eta6-arene, partially accounts for the slow decomposition of the complexes via hydrolysis and/or arene loss (t(1/2) = 9-21 h for azopyridine complexes, 310 K). The pKa* of the coordinated water in [(eta6-p-cym)Ru(azpyz-NMe2)OH2]2+ (13A) is 4.60, consistent with the increased acidity of the ruthenium center upon coordination to the azo ligand. None of the azpy complexes were cytotoxic toward A2780 human ovarian or A549 human lung cancer cells, but several of the azpy-NMe2, azpy-OH, and azpyz-NMe2 complexes were active (IC50 values 18-88 microM).     

Cyclic tetramers composed of rhodium(III), iridium(III), or ruthenium(II) half-sandwich and 6-purinethiones

Six new cyclic tetranuclear complexes [[M(Cp*)(L)](4)](4+) and [[Ru(II)(L)(cymene)](4)](4+) [Cp* = eta(5)-C(5)Me(5), cymene = eta(6)-p-MeC(6)H(4)Pr(i); M = Rh(III) and Ir(III); HL = 6-purinethione (H(2)put) and 2-amino-6-purinethione (H(2)aput)] were prepared in a self-assembly manner and characterized by NMR spectroscopy, electrospray ionization mass spectrometry, and X-ray crystal structure analysis. The two crystal structures of [[Rh(Cp*)(H(0.5)put)](4)](CF(3)SO(3))(2) and [[Ir(Cp*)(Haput)](4)](CF(3)SO(3))(4) revealed that they have similar S(4) structures with an alternate chirality array of CACA, and all ligands adopt a mu-1kappaN(9):2kappa(2)S(6),N(7) coordination mode. The orientations of the four bridging ligands are alternately up and down, and they form a central square cavity. Interestingly, the cationic tetramers of the former are stacked up along the c axis, resulting in an infinite channel-like cavity. The driving force of this stacking is due to intermolecular double hydrogen bonds [N(1)-H...N(21) = 2.752(4) A] at both sides of the cavity. In the two Rh(III)- and Ru(II)-H(2)aput systems, it turned out that the dimeric species are dominantly formed in the reaction solutions but finally convert into the tetrameric species.     

Synthesis, characterization, and reactivity of [Ru(bpy)(CH3CN)3(NO2)]PF6, a synthon for [Ru(bpy)(L3)NO2] complexes

We report a high yield, two-step synthesis of fac-[Ru(bpy)(CH3CN)3NO2]PF6 from the known complex [(p-cym)Ru(bpy)Cl]PF6 (p-cym = eta(6)-p-cymene). [(p-cym)Ru(bpy)NO2]PF6 is prepared by reacting [(p-cymene)Ru(bpy)Cl]PF6 with AgNO3/KNO2 or AgNO2. The 15NO2 analogue is prepared using K15NO2. Displacement of p-cymene from [(p-cym)Ru(bpy)NO2]PF6 by acetonitrile gives [Ru(bpy)(CH3CN)3NO2]PF6. The new complexes [(p-cym)Ru(bpy)NO2]PF6 and fac-[Ru(bpy)(CH3CN)3NO2]PF6 have been fully characterized by 1H and 15N NMR, IR, elemental analysis, and single-crystal structure determination. Reaction of [Ru(bpy)(CH3CN)3NO2]PF6 with the appropriate ligands gives the new complexes [Ru(bpy)(Tp)NO2] (Tp = HB(pz)3-, pz = 1-pyrazolyl), [Ru(bpy)(Tpm)NO2]PF6 (Tpm = HC(pz)3), and the previously prepared [Ru(bpy)(trpy)NO2]PF6 (trpy = 2,2',6',2' '-terpyridine). Reaction of the nitro complexes with HPF6 gives the new nitrosyl complexes [Ru(bpy)TpNO][PF6]2 and [Ru(bpy)(Tpm)NO][PF6]3. All complexes were prepared with 15N-labeled nitro or nitrosyl groups. The nitro and nitrosyl complexes were characterized by 1H and 15N NMR and IR spectroscopy, elemental analysis, cyclic voltammetry, and single-crystal structure determination for [Ru(bpy)TpNO][PF6]2. For the nitro complexes, a linear correlation is observed between the nitro 15N NMR chemical shift and 1/nu(asym), where nu(asym) is the asymmetric stretching frequency of the nitro group.     

Remarkably favorable hydration of carbonyl substituents in dicationic bis(arene) ruthenium complexes

The addition of water and methanol to the carbonyl substituents in the dicationic bis(arene)ruthenium complexes [(p-cymene)Ru(C6H5CHO)][OTf]2 (1) and [(p-cymene)Ru(C6H5C(O)CH3)][OTf]2 (2) is remarkably favorable-the equilibrium constants for these reactions are 1 million times greater than those for uncomplexed benzaldehyde and acetophenone. The addition of methanol to the carbonyl group in the o-anisaldehyde complex, [(p-cymene)Ru(C6H4{OCH3}CHO)][OTf]2 (6), occurs with a high degree of kinetic selectivity (94% de).     

A new synthetic entry to phosphinophosphinidene complexes. Synthesis and structural characterisation of the first side-on bonded and the first terminally bonded phosphinophosphinidene zirconium complexes [mu-(1,2:2-eta-tBu2P=P)[Zr(Cl)Cp2]2] and [[Zr(PPhMe2)Cp2](eta1)-P-PtBu2)

The reactions of lithiated diphosphanes with transition metal chlorides constitute a new general entry to phosphinophosphinidene complexes: the reaction of Cp2ZrCl2(Cp = C5H5) with tBu2P-P(SiMe3)Li (molar ratio approximately 1:1) yields [mu-(1,2:2-eta-tBu2P=P)[Zr(Cl)Cp2]2]; the reaction of Cp2ZrCl2 with tBu2P-P(SiMe3)Li (molar ratio approximately 1:2) and an excess of PPhMe2 in DME yields the first terminally bonded phosphinophosphinidene complex, [[Zr(PPhMe2)Cp2](eta1-P-PtBu2)].     

Ruthenium(II) polypyridyl complexes: potential precursors, metalloligands, and topo II inhibitors

Neutral and cationic mononuclear complexes containing both group 15 and polypyridyl ligands [Ru(kappa3-tptz)(PPh3)Cl2] [1; tptz=2,4,6-tris(2-pyridyl)-1,3,5-triazine], [Ru(kappa3-tptz)(kappa2-dppm)Cl]BF4 [2; dppm=bis(diphenylphosphino)methane], [Ru(kappa3-tptz)(PPh3)(pa)]Cl (3; pa=phenylalanine), [Ru(kappa3-tptz)(PPh3)(dtc)]Cl (4; dtc=diethyldithiocarbamate), [Ru(kappa3-tptz)(PPh3)(SCN)2] (5) and [Ru(kappa3-tptz)(PPh3)(N3)2] (6) have been synthesized. Complex 1 has been used as a metalloligand in the synthesis of homo- and heterodinuclear complexes [Cl2(PPh3)Ru(micro-tptz)Ru(eta6-C6H6)Cl]BF4 (7), [Cl2(PPh3)Ru(mu-tptz)Ru(eta6-C10H14)Cl]PF6 (8), and [Cl2(PPh3)Ru(micro-tptz)Rh(eta5-C5Me5)Cl]BF4 (9). Complexes 7-9 present examples of homo- and heterodinuclear complexes in which a typical organometallic moiety [(eta6-C6H6)RuCl]+, [(eta6-C10H14)RuCl]+, or [(eta5-C5Me5)RhCl]+ is bonded to a ruthenium(II) polypyridine moiety. The complexes have been fully characterized by elemental analyses, fast-atom-bombardment mass spectroscopy, NMR (1H and 31P), and electronic spectral studies. Molecular structures of 1-3, 8, and 9 have been determined by single-crystal X-ray diffraction analyses. Complex 1 functions as a good precursor in the synthesis of other ruthenium(II) complexes and as a metalloligand. All of the complexes under study exhibit inhibitory effects on the Topoisomerase II-DNA activity of filarial parasite Setaria cervi and beta-hematin/hemozoin formation in the presence of Plasmodium yoelii lysate.     

Synthesis, reactivity, spectroscopic characterization, X-ray structures, PGSE, and NOE NMR studies of (eta5-C5Me5)-rhodium and -iridium derivatives containing bis(pyrazolyl)alkane ligands

Rhodium(III) and iridium(III) complexes containing bis(pyrazolyl)methane ligands (pz = pyrazole, L' in general; specifically, L1 = H2C(pz)2, L2 = H2C(pzMe2)2, L3 = H2C(pz4Me)2, L4 = Me2C(pz)2), have been prepared in a study exploring the reactivity of these ligands toward [Cp*MCl(mu-Cl)]2 dimers (M = Rh, Ir; Cp* = pentamethylcyclopentadienyl). When the reaction was carried out in acetone solution, complexes of the type [Cp*M(L')Cl]Cl were obtained. However, when L1 and L2 ligands have been employed with excess [Cp*MCl(mu-Cl)]2, the formation of [Cp*M(L')Cl][Cp*MCl3] species has been observed. PGSE NMR measurements have been carried out for these complexes, in which the counterion is a cyclopentadienyl metal complex, in CD2Cl2 as a function of the concentration. The hydrodynamic radius (rH) and, consequently, the hydrodynamic volume (VH) of all the species have been determined from the measured translational self-diffusion coefficients (Dt), indicating the predominance of ion pairs in solution. NOE measurements and X-ray single-crystal studies suggest that the [Cp*MCl3]- approaches the cation, orienting the three Cl-legs of the "piano-stool" toward the CH2 moieties of the bis(pyrazolyl)methane ligands. The reaction of 1 equiv of [Cp*M(L')Cl]Cl or [Cp*M(L')Cl][Cp*MCl3] with 1 equiv of AgX (X = ClO4 or CF3SO3) in CH2Cl2 allows the generation of [Cp*M(L')Cl]X, whereas the reaction of 1 equiv of [Cp*M(L')Cl] with 2 equiv of AgX yields the dicationic complexes [Cp*M(L')(H2O)][X]2, where single water molecules are directly bonded to the metal atoms. The solid-state structures of a number of complexes were confirmed by X-ray crystallographic studies. The reaction of [Cp*Ir(L')(H2O)][X]2 with ammonium formate in water or acetone solution allows the generation of the hydride species [Cp*Ir(L')H][X].     

Synthesis and characterization of heterometallic clusters (Ir2Rh, Ir2W, Rh3) Containing 1,2-dicarba-closo-dodecaborane(12)-1,2-dithiolate chelate ligands, [(B10H10)C2S2]2-

The 16-electron half-sandwich complex [Cp*Ir[S2C2(B10H10)]] (Cp* = eta5-C5Me5) (1a) reacts with [[Rh(cod)(mu-Cl)]2] (cod = cycloocta-1,5-diene, C8H12) in different molar ratios to give three products, [[Cp*Ir[S2C2(B10H9)]]Rh(cod)] (2), trans-[[Cp*Ir[S2C2(B10H9)]]Rh[[S2C2(B10H10)]IrCp*]] (3), and [Rh2(cod)2[(mu-SH)(mu-SC)(CH)(B10H10)]] (4). Complex 3 contains an Ir2Rh backbone with two different Ir-Rh bonds (3.003(3) and 2.685(3) angstroms). The dinuclear complex 2 reacts with the mononuclear 16-electron complex 1a to give 3 in refluxing toluene. Reaction of 1a with [W(CO)3(py)3] (py = C5H5N) in the presence of BF3.EtO2 leads to the trinuclear cluster [[Cp*Ir[S2C2(B10H10)]]2W(CO)2] (5) together with [[Cp*Ir(CO)[S2C2(B10H10)]]W(CO)5] (6), and [Cp*Ir(CO)[S2C2(B10H10)]] (7). Analogous reactions of [Cp*Rh[S2C2(B10H10)]] (1 b) with [[Rh(cod)(mu-Cl)]2] were investigated and two complexes cis-[[Cp*Rh[S2C2(B10H10)]]2Rh] (8) and trans-[[Cp*Rh[S2C2(B10H10)]]2Rh] (9) were obtained. In refluxing THF solution, the cisoid 8 is converted in more than 95 % yield to the transoid 9. All new complexes 2-9 were characterized by NMR spectroscopy (1H, 11B NMR) and X-ray diffraction structural analyses are reported for complexes 2-5, 8, and 9.     

Alpha-amino acids with metallocenyl side chains

A straightforward method for the synthesis of enantiomerically pure bis(valine)metallocenes is presented. Derivatives of lithium cyclopentadienylvaline 1a, b were obtained by addition of the (R)- or (S)-Sch?llkopf reagents to 6,6-dimethylfulvene as single enantiomers and gave with FeCl2 or [RuCl2(dmso)4] the chiral metallocenes [Fe[C5H4-CMe2-[C4H2N2(OMe)2iPr]]2] (2a, b) and [Ru[C5H4-CMe2-[C4H2N2(OMe)2iPr]]2] (3a, b). Complex 2b was hydrolyzed to the ferrocenylene-bis(valine-methylester) [[Fe[C5H4-CMe2-CH(NH3+)COOMe]2]2+(Cl-)2] (7) without racemization. Complex 7 could be used as ligand and was treated with [[Cp*IrCl2]2] to afford [Fe[C5H4-CMe2-CH(COOMe)(NH2-IrCp*Cl2)]2] (10). The reactions of 1 with CoCl2, [Re(CO)5Br], [[(cod)RhCl2]2] (cod= 1,5-cyclooctadiene) or [Cp*MCl3] (M= Ti, Zr) gave the cyclopentadienyl complexes [[Co[C5H4-CMe2-[C4H2N2(OMe)2iPr]]2]+ I-] (11) and [Re[C5H4-CMe2-[C4H2N2(OMe)2iPr]](CO)3] (13), [(C8H12)Rh[C5H4-CMe2-[C4H2N2(OMe)2(iPr)]]] (14). [[Rh[C5H4-CMe2-[C4H2N2(OMe)2(iPr)]]I]2(mu-I)2] (15), [Cp*Cl2Ti-[C5H4-CMe2-[C4H2N2(OMe)2(iPr)]]] (16), and [Cp*Cl2Zr[C5H4-CMe2-[C4H2N2(OMe)2(iPr)]]] (17), with chiral valine derivatives as substituents on the cyclopentadienyl ring and with excellent diastereoselectivities. Also the Seebach reagent (Boc-BMI) or O'Donnell reagent could be added to 6,6-dimethylfulvene to give the lithium cyclopentadienides Li[C5H4-CMe2-[C3H2(tBu)(N-Boc)(NMe)O]] (18) and Li[C5H4-CMe2-CH(NCPh2)(COOEt)] (21), which formed the ferrocene derivatives [Fe[C5H4-CMe2-[C3H2(tBu)(N-Boc)(NMe)O]]2] (19) and [Fe[C5H4-CMe2-CH(NCPh2)(COOEt)]2] (22). The stable cobaltocinium cation in 11 and the complex 19 could be hydrolyzed to the metallocenes 12 and [Fe(C5H4-CMe2-CH(NH3+)(COO-)]2] (20) with two valines in the 1,1'-position. The structures of 2a, b, 11, 15, and 16 were determined by X-ray diffraction and confirm the diastereomeric purity of the compounds.     

Ruthenocene‐Type Complexes of N‐Fused Porphyrins

Ruthenocene‐type hybrid complexes with N‐fused porphyrinato ligands, [Ru(NFp)Cp] (NFp=N‐fused porphyrin, Cp=cyclopentadienyl), have been prepared and characterized by NMR and UV/Vis/NIR spectroscopy, cyclovoltammetry, and X‐ray crystallography. [Ru(NFp)Cp] is a common low‐spin ruthenium(II) complex and shows strong aromaticity. The Ru–Cp distance (1.833 Å) in [Ru(NFp)Cp] is comparable to that in [RuCp₂] (1.840 Å). DFT calculations on [Ru(NFp)Cp] showed the unequivocal contribution of the RuCp moiety as well as the NFp moiety to both the HOMO and LUMO, constructing a three‐dimensional d–π conjugated system. The HOMO–LUMO gaps of [Ru(NFp)Cp] are insensitive to the substituents on the NFp ligand, which is illustrated spectroscopically as well as theoretically. This is in sharp contrast to the ligand precursor, the N‐fused porphyrin, in which the HOMO–LUMO gap is affected by substituents in a similar manner to standard porphyrins and related macrocycles.