MHD flow and heat transfer of micropolar fluid between two porous disks

A numerical study is carried out for the axisymmetric steady laminar incompressible flow of an electrically conducting micropolar fluid between two infinite parallel porous disks with the constant uniform injection through the surface of the disks. The fluid is subjected to an external transverse magnetic field. The governing nonlinear equations of motion are transformed into a dimensionless form through von Karman’s similarity transformation. An algorithm based on a finite difference scheme is used to solve the reduced coupled ordinary differential equations under associated boundary conditions. The effects of the Reynolds number, the magnetic parameter, the micropolar parameter, and the Prandtl number on the flow velocity and temperature distributions are discussed. The results agree well with those of the previously published work for special cases. The investigation predicts that the heat transfer rate at the surfaces of the disks increases with the increases in the Reynolds number, the magnetic parameter, and the Prandtl number. The shear stresses decrease with the increase in the injection while increase with the increase in the applied magnetic field. The shear stress factor is lower for micropolar fluids than for Newtonian fluids, which may be beneficial in the flow and thermal control in the polymeric processing.     

Flow due to non-coaxial rotation of a porous disk and a second grade fluid rotating at infinity

An exact solution for the three-dimensional flow due to non-coaxial rotation of a porous disk and a second grade fluid at infinity is obtained. It is shown that for uniform suction or uniform blowing at the disk, an asymptotic profile exists for the velocity distribution. The velocity depends on two parameters: one of them is the suction parameter or blowing parameter and the other is the visco-elastic parameter. Furthermore, it is found that when the value of the visco-elastic parameter is fixed, the velocity decreases with an increase in the value of the suction parameter and when the value of the suction parameter is fixed, the velocity increases with an increase in the value of the visco-elastic parameter.     

MHD axisymmetric flow of third grade fluid between porous disks with heat transfer

The magnetohydrodynamic(MHD) flow of the third grade fluid between two permeable disks with heat transfer is investigated.The governing partial differential equations are converted into the ordinary differential equations by suitable transformations.The transformed equations are solved by the homotopy analysis method(HAM).The expressions for square residual errors are defined,and the optimal values of convergencecontrol parameters are selected.The dimensionless velocity and temperature fields are examined for various dimensionless parameters.The skin friction coefficient and the Nusselt number are tabulated to analyze the effects of dimensionless parameters.     

Flow of a Casson fluid on a rotating disk

The flow of a thin layer of a Casson fluid on a fast rotating disk is considered. The film thickness distribution at various times for various initial thickness distribution is calculated. The stability of the flow is examined.     

Steady flow and heat transfer of a magnetohydrodynamic Sisko fluid through porous medium in annular pipe

In this paper, the steady flow and heat transfer of a magnetohydrodynamic fluid is studied. The fluid is assumed to be electrically conducting in the presence of a uniform magnetic field and occupies the porous space in annular pipe. The governing nonlinear equations are modeled by introducing the modified Darcy's law obeying the Sisko model. The system is solved using the homotopy analysis method (HAM), which yields analytical solutions in the form of a rapidly convergent infinite series. Also, HAM is used to obtain analytical solutions of the problem for noninteger values of the power index. The resulting problem for velocity field is then numerically solved using an iterative method to show the accuracy of the analytic solutions. The obtained solutions for the velocity and temperature fields are graphically sketched and the salient features of these solutions are discussed for various values of the power index parameter. We also present a comparison between Sisko and Newtonian fluids. Copyright © 2011 John Wiley & Sons, Ltd.     

Exact solutions for the incompressible viscous fluid of a porous rotating disk flow

The present paper is concerned with a class of exact solutions to the steady Navier-Stokes equations for the incompressible Newtonian viscous fluid flow motion due to a porous disk rotating with a constant angular speed. The three-dimensional equations of motion are treated analytically yielding derivation of exact solutions with suction and injection through the surface included. The well-known thinning/thickening flow field effect of the suction/injection is better understood from the exact velocity equations obtained. Making use of this solution, analytical formulas corresponding to the permeable wall shear stresses are extracted.Interaction of the resolved flow field with the surrounding temperature is further analyzed via the energy equation. As a result, exact formulas are obtained for the temperature field which take different forms depending on whether suction or injection is imposed on the wall. The impacts of several quantities are investigated on the resulting temperature field. In accordance with the Fourier‘s heat law, a constant heat transfer from the porous disk to the fluid takes place. Although the influence of dissipation varies, suction enhances the heat transfer rate as opposed to the injection.     

Flow of a Viscoplastic Fluid on a Rotating Disk

ＦＬＯＷＯＦＡＶＩＳＣＯＰＬＡＳＴＩＣＦＬＵＩＤＯＮＡＲＯＴＡＴＩＮＧＤＩＳＫＦａｎＣｈｕｎ（范椿）（ＩｎｓｔｉｕｉｅｏｆＭｅｃｈａｎｉｃｓ，ＡｃａｄｅｍｉａＳｉｎｉｃａ，Ｂｅｉｊｉｎｇ）（ＲｅｃｅｉｖｅｄＮｏｖ．２０，１９９２；Ｃｏｍｍｕｎｉｃａｔ...     

Rotationally symmetric flow over a rotating disk

The rotationally symmetric flow over a rotating disk in an incompressible viscous fluid is analyzed by a new method when the fluid at infinity is in a state of rigid rotation (in the same or in the opposite sense) about the same axis as that of the disk. Asymptotic expansions for the velocity field over the entire flow field are obtained for the general class of one-parameter rotationally symmetric flows. This method is further extended to the case when a uniform suction or injection is assumed at the rotating disk. Fluid motion induced by oscillatory suction of small amplitude at the rotating disk is also discussed.An initial-value analysis reveals that resonance is possible only when the angular velocity of the rotating fluid is greater than that of the rotating disk.     

Reiner-Rivlin nanomaterial heat transfer over a rotating disk with distinct heat source and multiple slip effects

Applied Mathematics and Mechanics - The thermodynamic features of the Reiner-Rivlin nanoliquid flow induced by a spinning disk are analyzed numerically. The non-homogeneous two-phase nanofluid...     

Magnetohydrodynamic flow past a porous rotating disk in a circular magnetic field

This paper studies the effects of a circular magnetic field on the flow of a conducting fluid about a porous rotating disk. Using modern quasi-Newton and globally convergent homotopy methods, numerical solutions are obtained for a wide range of magnetic field strengths, suction and injection velocities and Alfven and disk speeds. Results are presented graphically in terms of three non-dimensional parameters. There is excellent agreement with previous work and asymptotic formulae.     

Convective heat transfer from a rotating or nonrotating axisymmetric body

An analysis of steady laminar mixed-convection heat transfer from a rotating or nonrotating axisymmetric body is presented. A mixed-convection parameter is proposed to serve as a controlling parameter that determines the relative importance of the forced and the free convection. In addition, a rotation parameter is introduced to indicate the relative contributions of the flow forced convection and the rotational forced convection. The values of both these two parameters lie between 0 and 1. Furthermore, the coordinates and dependent variables are transformed to yield computationally efficient numerical solutions that are valid over the entire range of mixed convection from the forced-convection limit (rotating or nonrotating bodies) to the pure free-convection limit (non-rotating bodies) and the entire regime of forced convection from the pure flow forced-convection limit (nonrotating bodies) to pure rotational forced-convection limit (rotating bodies). The effects of mixed-convection intensity, body rotation, fluid suction or injection, and fluid Prandtl number on the velocity profiles, the temperature profiles, the skin-friction parameter, and heat transfer parameter are clearly illustrated for both cases of buoyancy assisting and opposing flow conditions.     

Axisymmetric magnetohydrodynamic flow of Jeffrey fluid over a rotating disk

This paper examines the magnetohydrodynamic boundary layer flow of Jeffrey fluid due to a rotating disk. The governing partial differential equations are first transformed into the coupled system of ordinary differential equations and then solved by using the homotopy analysis method. The influence of various involved physical parameters on the dimensionless radial and azimuthal velocities is sketched and analyzed. The variation of skin friction coefficients in radial and azimuthal directions is studied for various values of pertinent parameters. Copyright © 2011 John Wiley & Sons, Ltd.     

Fluid flow in a rotating cylindrical container with a rotating disk at the fluid surface

Fluid flow in a rotating cylindrical container of radius R_w and height H with a co-axially rotating disk of radius R_d at the fluid surface is numerically investigated. The container and the disk rotate with angular velocities Ω_w and Ω_d, respectively. We solve the axisymmetric Navier-Stokes equations using a finite-volume method. The effects of the relative directions and magnitudes of the disk and container rotations are studied. The calculations are carried out with various ratios of Ω_w and Ω_d for H/R_w = 2 and R_d/R_w = 0.7. Streamlines and velocity vectors in the meridional plane and azimuthal velocities are obtained. The flow fields in the meridional plane are discussed with relation to azimuthal velocities in the interior of the container. The numerical results are also compared with experimental data.     

Numerical solution of the three‐dimensional fluid flow in a rotating heterogeneous porous channel

A numerical solution to the problem of the three‐dimensional fluid flow in a long rotating heterogeneous porous channel is presented. A co‐ordinate transformation technique is employed to obtain accurate solutions over a wide range of porous media Ekman number values and consequent boundary layer thicknesses. Comparisons with an approximate asymptotic solution (for large values of Ekman number) and with theoretical predictions on the validity of Taylor–Proudman theorem in porous media for small values of Ekman number show good qualitative agreement. An evaluation of the boundary layer thickness is presented and a power‐law correlation to Ekman number is shown to well‐represent the results for small values of Ekman number. The different three‐dimensional fluid flow regimes are presented graphically, demonstrating the distinct variation of the flow field over the wide range of Ekman numbers used. Copyright © 1999 John Wiley & Sons, Ltd.     

Numerical analysis of fluid flow and mass transfer in a channel with a porous bottom wall

The flow of a solution between parallel plates is considered. The bottom plate is porous, while the top one is an impermeable solid. A computer program based on the control volume approach was developed to analyse the flow and concentration fields. The effects of the slip at the porous wall on the velocity and particle concentration distributions were investigated. It was observed that as the slip increases, the concentration on the porous wall decreases and the maximum velocity moves towards the porous wall. The concentration on the porous wall increases in the flow direction. This increase in the particle concentration along the porous wall may cause a reduction of the porosity and hence a variation in the suction rate along the porous wall. In order to take this effect into account, a linearly varying transverse velocity along the porous wall was considered. The results were compared with the data available in the literature.     

Natural convection of non-Newtonian power-law fluid over axisymmetric and two-dimensional bodies of arbitrary shape in fluid-saturated porous media

Numerical analysis of the free convection coupled heat and mass transfer is presented for non-Newtonian power-law fluids with the yield stress flowing over a two-dimensional or axisymmetric body of an arbitrary shape in a fluid-saturated porous medium. The governing boundary layer equations and boundary conditions are cast into a dimensionless form by the similarity transformation. The resulting system of equations is solved by a finite difference method. The parameters studied are the rheological constants, the buoyancy ratio, and the Lewis number. Representative velocity, temperature, and concentration profiles are presented and discussed. It is found that the results depend strongly on the values of the yield stress parameter and the power-law index of the non-Newtonian fluid.     

Natural convection of non-Newtonian power-law fluid over axisymmetric and two-dimensional bodies of arbitrary shape in fluid-saturated porous media

Numerical analysis of the free convection coupled heat and mass transfer is presented for non-Newtonian power-law fluids with the yield stress flowing over a two-dimensional or axisymmetric body of an arbitrary shape in a fluid-saturated porous medium. The governing boundary layer equations and boundary conditions are cast into a dimensionless form by the similarity transformation. The resulting system of equations is solved by a finite difference method. The parameters studied are the rheological constants, the buoyancy ratio, and the Lewis number. Representative velocity, temperature, and concentration profiles are presented and discussed. It is found that the results depend strongly on the values of the yield stress parameter and the power-law index of the non-Newtonian fluid.     

Melting heat transfer effects on stagnation point flow of micropolar fluid saturated in porous medium with internal heat generation （absorption）

The effect of melting heat transfer on the two dimensional boundary layer flow of a micropolar fluid near a stagnation point embedded in a porous medium in the presence of internal heat generation/absorption is investigated. The governing non-linear partial differential equations describing the problem are reduced to a system of non-linear ordinary differential equations using similarity transformations solved numerically using the Chebyshev spectral method. Numerical results for velocity, angular velocity and temperature profiles are shown graphically and discussed for different values of the inverse Darcy number, the heat generation/absorption parameter, and the melting parameter. The effects of the pertinent parameters on the local skin-friction coefficient, the wall couple stress, and the local Nusselt number are tabulated and discussed. The results show that the inverse Darcy number has the effect of enhancing both velocity and temperature and suppressing angular velocity. It is also found that the local skin-friction coefficient decreases, while the local Nusselt number increases as the melting parameter increases.     

Two fluid flow and heat transfer in an inclined channel containing porous and fluid layer

Convective flow and heat transfer in an inclined channel bounded by two rigid plates held at constant different temperatures with one region filled with porous matrix saturated with a viscous fluid and another region with a clear viscous fluid different from the fluid in first region is studied analytically. The coupled nonlinear governing equations are solved using regular perturbation method. It is found that the presence of porous matrix in one of the region reduces the velocity and temperature. Results have been presented for a wide range of governing parameters such as Grashof number, porous parameter, angle of inclination, ratio of heights of the two layers and also the ratio of viscosities.