Well-defined protein-polymer conjugates via in situ RAFT polymerization

Biotechnology, biomedicine, and nanotechnology applications would benefit from methods generating well-defined, monodisperse protein-polymer conjugates, avoiding time-consuming and difficult purification steps. Herein, we report the in situ synthesis of protein-polymer conjugates via reversible addition-fragmentation chain transfer polymerization (RAFT) as an efficient method to generate well-defined, homogeneous protein-polymer conjugates in one step, eliminating major postpolymerization purification steps. A water soluble RAFT agent was conjugated to a model protein, bovine serum albumin (BSA), via its free thiol group at Cys-34 residue. The conjugation of the RAFT agent to BSA was confirmed by UV-visible spectroscopy, matrix-assisted laser desorption ionization--time of flight (MALDI-TOF), and 1H NMR. BSA-macroRAFT agent was then used to control the polymerization of two different water soluble monomers, N-isopropylacrylamide (NIPAAm) and hydroxyethyl acrylate (HEA), in aqueous medium at 25 degrees C. The growth of the polymer chains from BSA-macroRAFT agent was characterized by size exclusion chromatography (SEC), 1H NMR, MALDI-TOF, and polyacrylamide gel electrophoresis (PAGE) analyses. The controlled character of the RAFT polymerizations was confirmed by the linear evolution of molecular weight with monomer conversion. The SEC analyses showed no detectable free, nonconjugated polymer formation during the in situ polymerization. The efficiency of BSA-macroRAFT agent to generate BSA-polymer conjugates was found to be ca. 1 by deconvolution of the SEC traces of the polymerization mixtures. The structural integrity and the conformation-related esterase activity of BSA were found to be unaffected by the polymerization conditions and the conjugation of the polymer chain. BSA-poly(NIPAAm) conjugates showed hybrid temperature-dependent phase separation and aggregation behavior. The lower critical solution temperature values of the conjugates were found to increase with the decrease in molecular weight of poly(NIPAAm) block conjugated to BSA.     

Emerging synthetic approaches for protein-polymer conjugations

Protein-polymer conjugates are important in diverse fields including drug delivery, biotechnology, and nanotechnology. This feature article highlights recent advances in the synthesis and application of protein-polymer conjugates by controlled radical polymerization techniques. Special emphasis on new applications of the materials, particularly in biomedicine, is provided.     

Alternating terpyridine‐endfunctionalized copolymers of styrene and diphenylethylene via anionic polymerization techniques: A detailed characterization study

1,1‐Diphenylethylenene (DPE) was copolymerized anionically with styrene to yield well‐defined alternating copolymers, which were terminated by reacting the “living” polymeric carbanion species with 4′‐chloro‐2,2′:6′2″‐terpyridine. DPE containing polymers show improved long‐term service temperatures due to the stiffening of the polymer main chain by the bulky phenyl‐rings. In addition, the functionality provided by the terpyridine group allows the synthesis of attractive materials for various fields of application. The obtained polymers were fully characterized by means of nuclear magnetic resonance, gel permeations chromatography, elemental analysis, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, ultraviolet‐visible spectroscopy, and macromolecular hydrodynamic methods (analytical ultracentrifugation, gel permeation chromatography, intrinsic viscosimetry). In the molar mass range of 2 < M < 25 kg/mol, the scaling relationships between M and hydrodynamic characteristics are obtained. The values of the Kuhn segment length (or persistence length) and hydrodynamic diameters are evaluated and compared with those of linear polystyrene. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3691–3701, 2009     

Synthesis and matrix-assisted laser desorption/ionization time-of-flight characterization of bisphenol-A copolyformals containing nickel(II)/Schiff base, eicosane and 2-butene units in the main chain

Some bisphenol-A copolyformals, containing in the main chain different amounts of a Ni-diimine nonlinear optical (NLO)-chromophore, eicosane and/or 2-butene units, were synthesized by condensation reaction between dibromomethane and suitable mixtures of Ni(II)/Schiff base complex, 1,20-di(bisphenol-A)ether-eicosane and/or 1,4-di(bisphenol-A)ether-2-butene. Structural composition and thermal properties of polymeric materials were inferred by analyses by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS), nuclear magnetic resonance (NMR), gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and thermogravimetry (TG). MALDI-TOF data show that both Ni-diimine and unsaturated units are present in the copolyformals with a homogeneous arrangement in all the polymer mass range (GPC data). It has also been ascertained that the glass transition temperature (Tg) of the copolymers changes as a consequence of the abundance of aliphatic units in the macromolecules (DSC data). Cross-linking experiments of the copolymer at temperatures near the Tg value and under UV irradiation were also performed.     

Detailed analysis of α,ω-bis(4-hydroxybutyl) poly(dimethylsiloxane) using GPC-MALDI TOF mass spectrometry

In this study the prepolymer alpha,omega-bis(4-hydroxybutyl) poly(dimethylsiloxane), used in the formulation of oxygen permeable films, is evaluated by gel permeation chromatography (GPC) combined with matrix assisted laser desorption ionization (MALDI) time of flight (TOF) mass spectrometry (MS). Two unexpected mass distributions are observed in the mass spectra. Reaction schemes for the formation of these distributions are proposed. A solution phase trimethylsilane end group modification was performed on the prepolymer to determine whether the unexpected mass distributions occur as impurities from synthesis or as artifacts from the MS process. Evaluation of the TMS modified prepolymer indicates the unexpected mass distributions indeed occur as impurities from the synthetic procedure. Average molecular weight values are determined by traditional GPC, direct MALDI-TOF MS, and GPC-MALDI-TOF MS methods and the results are compared.     

Mixed iridium(III) and ruthenium(II) polypyridyl complexes containing poly(ε‐caprolactone)‐bipyridine macroligands

A hydroxy‐functionalized bipyridine ligand was polymerized with ε‐caprolactone utilizing the controlled ring‐opening polymerization of ε‐caprolactone in the presence of stannous octoate. The resulting poly(ε‐caprolactone)‐containing bipyridine was characterized by ¹H NMR and IR spectroscopy, and gel permeation chromatography, as well as matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, revealing the successful incorporation of the bipyridine ligand into the polymer chain. Coordination to iridium(III) and ruthenium(II) precursor complexes yielded two macroligand complexes, which were characterized by NMR, gel permeation chromatography, matrix‐assisted laser desorption/ionization time‐of‐flight MS, cyclic voltammetry, and differential scanning calorimetry. In addition, both photophysical and electrochemical properties of the metal‐containing polymers proved the formation of a trisruthenium(II) and a trisiridium(III) polypyridyl species, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4153–4160, 2004     

Evaluation of matrix-assisted laser desorption ionization mass spectrometry for polymer characterization

A protocol for the preparation of polymeric samples for time-of-flight matrix-assisted laser desorption ionization mass spectrometry (TOF-MALDI-MS) analysis was developed. Dithranol was identified as a good matrix for polystyrene (PS), and the addition of silver for cationization of molecules was determined to be necessary. Based on this preparative method, low molecular weight samples of other polymers [polyisoprene, polybutadiene, poly(ethylene oxide), poly(methyl methacrylate), and polydimethylsiloxane] were analyzed with molecular weights up to 49 ku. The effects of laser intensity were determined to influence the molecular weight distribution of intact oligomers, most significantly for low molecular weight polymers. Linear and reflectron modes of analysis were evaluated; better signal intensity and resolution were obtained in the reflectron mode. The TOF-MALDI-MS measurements are compared with time-of-flight secondary ion mass spectrometry (TOF-SIMS) and gel permeation chromatography (GPC) for the same polymers. The M _n values calculated by TOF-MALDI-MS consistently are higher than values calculated by TOF-SIMS for all classes of polymers with molecular weights up to 8 ku. The molecular weights of the PS calculated from TOF-MALDI-MS are in good agreement with GPC (±10%). The composition of the terminal group on a polymer chain may affect the ion yields. The ion yields of intact oligomers were evaluated as a function of end group composition for both TOF-MALDI-MS and TOF-SIMS. The slight disparity of results between TOF-SIMS and TOF-MALDI-MS for the perfluoroalkyl-terminated PS suggests that the oligomers are desorbed preferentially from the surface in the TOF-SIMS analysis, rather than having an increased ionization probability.     

Controlling the positive ion electrospray ionization of poly(ethylene glycols) when using ultra-high-performance supercritical fluid chromatography-mass spectrometry

Poly(ethylene glycols) are complex polymers often added to pharmaceutical formulations to improve drug solubility and delivery. One of the main challenges when using chromatographic techniques coupled to mass spectrometry is the unselective ionization of poly(ethylene glycols) oligomers. Additionally, when the chain length is large enough, multiple charged species are formed, further complicating the mass spectra and processing. This study uses the advanced oligomer separation provided by supercritical fluid chromatography with a mass spectrometry approach that selectively ionizes poly(ethylene glycols) as ammoniated molecules to simplify data analysis and facilitate batch-to-batch comparisons. Several visual representations of the response of the ionization events based on the polymer molecular weight and the repeating unit were used to elucidate trends in ionization. Evaluation of the influence of the oligomer length and end-group on the electrospray ionization of the polymer allowed the development of a process to enable selective ionization for these complex polymers.     

Thio‐Bromo “Click” Reaction Derived Polymer–Peptide Conjugates for Their Self‐Assembled Fibrillar Nanostructures

The synthesis and self‐assembly of peptide–polymer conjugates into fibrillar nanostructures are reported, based on the amyloidogenic peptide KLVFF. A strategy for rational synthesis of polymer–peptide conjugates is documented via tethering of the amyloidogenic peptide segment LVFF (Aβ_17‐20) and its modified derivative FFFF to the hydrophilic poly(ethylene glycol) monomethyl ether (mPEG) polymer via thio‐bromo based “click” chemistry. The resultant conjugates mPEG‐LVFF‐OMe and mPEG‐FFFF‐OMe are purified via preparative gel permeation chromatography technique (with a yield of 61% and 64%, respectively), and are successfully characterized via combination of spectroscopic and chromatographic methods, including electrospray ionization time‐of‐flight mass spectrometry. The peptide‐guided self‐assembling behavior of the as‐constructed amphiphilic supramolecular materials is further investigated via transmission electron microscopic and circular dichroism spectroscopic analysis, exhibiting fibrillar nanostructure formation in binary aqueous solution mixture.     

In situ preparation of protein-"smart" polymer conjugates with retention of bioactivity

Protein-polymer conjugates are widely used in biotechnology and medicine, and new methods to prepare the bioconjugates would be advantageous for these applications. In this report, we demonstrate that bioactive "smart" polymer conjugates can be synthesized by polymerizing from defined initiation sites on proteins, thus preparing the polymer conjugates in situ. In particular, free cysteines, Cys-34 of bovine serum albumin (BSA) and Cys-131 of T4 lysozyme V131C, were modified with initiators for atom transfer radical polymerization (ATRP) either through a reversible disulfide linkage or irreversible bond by reaction with pyridyl disulfide- and maleimide-functionalized initiators, respectively. Initiator conjugation was verified by electrospray-ionization mass spectroscopy (ESI-MS), and the location of the modification was confirmed by muLC-MSMS (tandem mass spectrometry) analysis of the trypsin-digested protein macroinitiators. Polymerization of N-isopropylacrylamide (NIPAAm) from the protein macroinitiators resulted in thermosensitive BSA-polyNIPAAm and lysozyme-polyNIPAAm in greater than 65% yield. The resultant conjugates were characterized by gel electrophoresis and size exclusion chromatography (SEC) and easily purified by preparative SEC. The identity of polymer isolated from the BSA conjugate was confirmed by (1)H NMR, and the polydispersity index was determined by gel permeation chromatography (GPC) to be as low as 1.34. Lytic activities of the lysozyme conjugates were determined by two standard assays and compared to that of the unmodified enzyme prior to polymerization; no statistical differences in bioactivity were observed.     

Water-soluble dendrimer–poly(ethylene glycol) starlike conjugates as potential drug carriers

The design and synthesis of a new dendrimer–poly(ethylene glycol) (PEG) conjugate that may be used as a model drug carrier are described. The starting material is a polyether dendrimer with two different types of chain end functionalities. The dendritic assembly is made water soluble through attachment of short PEG chains to the dendrimer via one type of functionality. The remaining chain end functionalities then were used to incorporate model drug molecules of varying polarity into the modified dendrimer. Cholesterol and two amino acid derivatives were selected as model drugs for attachment through their respective hydroxyl, carboxylic acid, and amino functional groups to the dendrimer via carbonate, ester, and carbamate linkages. The resulting water-soluble dendrimer-model drug conjugates were characterized by matrix-assisted laser desorption ionization time of flight (MALDI-TOF) mass spectrometry. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3492–3503, 1999     

Peptide mass mapping of acetylated isoforms of histone H4 from mouse lymphosarcoma cells treated with histone deacetylase (HDACs) inhibitors

The acetylated isoforms of histone H4 from mouse lymphosarcoma cells treated with HDAC inhibitors trichostatin A (TSA) and depsipeptide (DDP) were separated by acetic acid urea-polyacrylamide gel electrophoresis (AU-PAGE), in-gel digested, and analyzed by matrix assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and liquid chromatography tandem mass spectrometry (LC-MS/MS). The acetylation pattern of histone H4 in mouse lymphosarcoma cells induced by TSA was established in which acetylation initially occurred at K16 followed by K12 and then K8 and/or K5. An identical order of acetylation was found for cells treated with DDP.     

Living star polymer formation (RAFT) studied via electrospray ionization mass spectrometry

A mass spectrometry analysis has been performed on complex architecture polymeric material produced during reversible addition fragmentation chain transfer (RAFT) polymerizations yielding star polymers. Para‐acetoxystyrene (AcOSty) has been polymerized at 60 °C, using azobisisobutyronitrile (AIBN) as the thermally decomposing initiator, in the presence of the R‐group approach tetrafunctional RAFT agent (1,2,4,5‐tetrakis‐(2‐phenyl‐thioacetyl‐sulfanylmethyl)‐benzene). In addition to ideal star material, a variety of products unique to this mode of polymerization have been identified. These include star–star couples, stars terminated with initiator fragments, star–star couples terminated with initiator fragments and linear polymers, supporting the notion that these species are responsible for the structured molecular‐weight distributions measured for these systems when analyzed via gel permeation chromatography. The analysis begins with a study of AcOSty polymerizing (i) in the absence of any mediating agent and (ii) in the presence of a monofunctional RAFT agent, revealing the mode of termination of propagating poly(AcOSty) radicals as combination and that some ionization biases exist among variants of poly (AcOSty). The interpretation of the mass spectrometry data has been aided by a novel kinetic model of star polymerizations, allowing the rationalization of experimental observations with theoretical expectations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1873–1892, 2008     

Novel propylmethacrylate-monofunctionalized polyhedral oligomeric silsesquioxanes homopolymers prepared via radical bulk free polymerization

Novel propylmethacrylate-monofunctionalized polyhedral oligomeric silsesquioxanes (POSS-PMA) homopolymers were obtained, in good yield, by free bulk radical polymerizations of the low melting macromer heptaisobutylpentacyclooctasiloxan-1-(yl)propylmethacrylate [(PMA)(i-Bu)₇T₈], 1, by using different initiator/macromer molar ratios. Their characterization was accomplished by TG, DTG and DSC analyses, Gel permeation chromatography (GPC) and MALDI-TOF mass spectrometry. The results indicate that both macromolecular as well as the thermal properties of the new materials are dependent on the initiator/macromer molar ratio used in the polymerization process. By increasing the amount of initiator, polymers with lowest molecular masses, highest molecular weight distributions (MWD) and lowest thermal stability were obtained. High value of MWD was found for all the samples. The different thermal behavior observed for the sample prepared by using the highest amount of initiator is explained by the formation of polymer branched chain, induced by chain transfer to polymer processes. MALDI-TOF mass spectra resulted diagnostic of the homopolymers compositions displaying a series of peaks corresponding to oligomeric structures present in the polymeric samples. The thermal polymerization of 1 performed without employing catalyst was also investigated. Only low yields (4%) of short oligomers (from dimer to pentamer), bearing degraded POSS cages, were isolated.     

Protection in radiolysis of n-hexadecane—I. Radiolysis of pure liquid n-hexadecane

Radiolysis of pure liquid n-hexadecane under vacuum has been studied to obtain greater understanding about the effect of radiation on open chain polymers such as polyethylene. Gas chromatography, gel permeation chromatography and mass spectrometry have been used to analyze the radiolysis products and their yields have been determined. The gas products mainly contain H₂, the condensed products contain saturated and unsaturated scission products, hexadecene and crosslink products. Mass analysis of the condensed products shows unsaturations in the crosslink products.     

活性负离子聚合法制备POSS基七臂星形聚合物及其表征

首先利用高真空活性负离子聚合方法制备聚异戊二烯锂(PI-Li)和(聚苯乙烯-b-聚异戊二烯)锂(PS-PI-Li)活性链,再与单羟基七乙烯基多面体齐聚倍半硅氧烷(VPOSS-OH)发生加成反应,一步法制备2种含羟基的七臂星形聚合物.用分级沉淀法去除低加成产物,即可得到纯的七臂星形聚合物7PI-POSS-OH和7(PS-PI)-POSS-OH,利用凝胶渗透色谱(GPC)、核磁共振波谱(1H-,13C-NMR)、红外光谱(FTIR)和基质辅助激光解吸电离飞行时间质谱(MALDI-TOF MS)表征了聚合物的化学结构、分子量及分子量分布,并通过热失重分析(TGA)测试了聚合物的热分解温度.     

基质辅助激光解析电离飞行时间质谱分析合成聚合物样品制备的研究进展

基质辅助激光解析电离飞行时间质谱(MALDI-TOF-MS)在合成聚合物的表征手段中具有不可替代的优点,可以提供聚合物的质量分布、嵌段长度、端基等信息.但由于合成聚合物的离子化效率通常不佳,因此样品制备是分析成功的关键.从基质、基质添加剂以及混样方式3个方面综述了MALDI-TOF质谱分析合成聚合物样品制备的研究进展.     

Control of polymer topology through transition-metal catalysis: synthesis of hyperbranched polymers by cobalt-mediated free radical polymerization

A novel approach was demonstrated for the synthesis of hyperbranched polymers by direct free radical polymerization of divinyl monomers controlled by a cobalt chain transfer catalyst (1). By controlling the competition between propagation and chain transfer with 1, the free radical polymerization of ethylene glycol dimethacrylate (3) afforded soluble hyperbranched polymers in one pot. The structure of the hyperbranched polymers was confirmed by (1)H and (13)C NMR. The molecular weight and intrinsic viscosity of the hyperbranched polymers were measured by matrix-assisted laser desorption ionization (MALDI) mass spectrometry and size exclusion chromatography (SEC) equipped with triple detectors. The intrinsic viscosities of the hyperbranched polymers are much lower than those of their linear analogues and do not show molecular weight dependence. The unique structure and properties of these hyperbranched polymers combined with the commercial availability of many divinyl monomers and the robustness of free radical polymerization make this new approach attractive for the preparation of new functional materials.     

Investigation of 1,1-diphenylethylene Oligomerization in the End-Capping Reaction of Poly(styryl)lithium

Summary: The possible oligomerization of 1,1-diphenylethylene (DPE) in the end-capping reaction of poly(styryl)lithium (PSLi) was studied in hydrocarbon solvents using excess DPE (≤16 mol-eq); the effect of addition of THF (30 mol-eq Lewis base) and extended times of reaction (8-24 h) were also investigated. The characterization of the polymers was made by size exclusion chromatography (SEC), proton nuclear magnetic resonance spectroscopy (1H NMR) and matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF MS). MALDI- TOF mass spectrometric results revealed the absence of DPE oligomerization under the reaction conditions used in this study.     

The synthesis and photoactive properties of cyclic amphiphilic polymers with azobenzene in main chain

The cyclic amphiphilic polymers with azobenzene in main chain, cyclic azobenzene tetraethylene glycol polystyrene (cyclic‐Azo‐TEG‐PS) with different molecular weights, were successfully synthesized by combining atom transfer radical polymerization (ATRP) and Cu (I)‐catalyzed azide/alkyne cycloaddition (CuAAC). Gel permeation chromatography (GPC), proton nuclear resonance (¹H NMR), Fourier transform‐infrared (FT‐IR), and matrix‐assisted laser desorption/ionization time of flight (MALDI‐TOF) mass spectrometry were used to prove the complete conversion from linear polymers to cyclic ones. The thermal properties and photoisomerization behaviors of obtained cyclic polymers have been investigated by comparison with the linear analogues. The cyclic polymer displayed a higher glass transition temperature compared with the linear one, measured by differential scanning calorimetry (DSC). It was found that the trans‐to‐cis and cis‐to‐trans isomerization of cyclic polymers was both slower than that of their respective linear counterparts upon irradiation by UV/visible light. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1834–1841