Intermolecular amidation of unactivated sp2 and sp2 C-H bonds via palladium-catalyzed cascade C-H activation/nitrene insertion

This communication describes the Pd(OAc)2-catalyzed intermolecular amidation reactions of unactivated sp2 and sp3 C-H bonds using primary amides and potassium persulfate. The substrates containing a pendent oxime or pyridine group were amidated with excellent chemo- and regioselectivities. It is noteworthy that reactive C-X bonds were well-tolerated and a variety of primary amides can be effective nucleophiles for the Pd-catalyzed C-H amidation reactions. For the reaction of unactivated sp3 C-H bonds, beta-amidation of 1 degrees sp3 C-H bonds versus 2 degrees C-H bonds is preferred. The catalytic reaction is initiated by chelation-assisted cyclopalladation involving C-H bond activation. Preliminary mechanistic study suggested that the persulfate oxidation of primary amides should generate reactive nitrene species, which then reacted with the cyclopalladated complex.     

C-H bond activation of hydrocarbons by an imidozirconocene complex

Monomeric imidozirconocene complexes of the type Cp2(L)Zr=NCMe3 (Cp = cyclopentadienyl, L = Lewis base) have been shown to activate the carbon-hydrogen bonds of benzene, but not the C-H bonds of saturated hydrocarbons. To our knowledge, this singularly important class of C-H activation reactions has heretofore not been observed in imidometallocene systems. The M=NR bond formed on heating the racemic ethylenebis(tetrahydro)indenyl methyl tert-butyl amide complex, however, cleanly and quantitatively activates a wide range of n-alkane, alkene, and arene C-H bonds. Mechanistic experiments support the proposal of intramolecular elimination of methane followed by a concerted addition of the hydrocarbon C-H bond. Products formed by activation of sp2 C-H bonds are generally more thermodynamically stable than those formed by activation of sp3 C-H bonds, and those resulting from reaction at primary C-H bonds are preferred over secondary sp3 C-H activation products. There is also evidence that thermodynamic selectivity among C-H bonds is sterically rather than electronically controlled.     

Synthesis of new class of alkyl azarene pyridinium zwitterions via iodine mediated sp3 C-H bond activation

An efficient and conceptually different approach toward C-H bond activation by using iodine mediated sp(3) C-H functionalization for the synthesis of alkyl azaarene pyridinium zwitterions is described. This work has the interesting distinction of being the first synthesis of a new class of alkyl azaarene pyridinium zwitterion via transition-metal-free sp(3) C-H bond activation of an alkyl azaarene.     

Direct C2-alkylation of azoles with alcohols and ethers through dehydrogenative cross-coupling under metal-free conditions

A metal-free novel, simple, and highly efficient method for the direct C2-alkylation of azoles with alcohols and ethers has been developed on the basis of an oxidative C-H activation process. The dehydrogenative C-C cross-coupling reactions of α-position sp(3) C-H in alcohols and ethers with the 2-position sp(2) C-H in azoles proceeded smoothly in the presence of tert-butyl hydroperoxide (TBHP) under neat reaction conditions, which generated the corresponding products in good yields.     

Propargylation of 1,3-dicarbonyl compounds with 1,3-diarylpropynes via oxidative cross-coupling between sp3 C-H and sp3 C-H

A highly efficient oxidative-coupling reaction between diarylpropargylic sp(3) C-H and active methylenic sp(3) C-H was achieved with DDQ as oxidant. The reaction afforded a direct method for the propargylation of 1,3-dicarbonyl compounds, thus providing a concise synthesis of the corresponding products.     

交叉脱氢偶联反应*

发现高效高选择性的有机合成反应是有机合成化学研究中一个重要的发展方向。传统的有机合成化学是建立在官能团相互转化基础上的,又称官能团化学。非活泼化学键（如C-H键）的直接官能团化省去了一步甚至多步制备官能团化的反应底物,因此,非活泼化学键活化是提高有机合成反应效率的一个重要发展方向。交叉脱氢偶联（Cross-Dehydrogenative-Coupling,CDC）反应就是直接利用不同反应底物中的C-H键,在氧化条件下,进行脱氢偶联反应形成C-C键。交叉脱氢偶联反应实现了更短的合成路线和更高的原子利用效率,为直接利用简单的原料进行高效的复杂的有机合成任务提供了一种新的思路和手段。     

Heterocycle synthesis via direct C-H/N-H coupling

A method for five- and six-membered heterocycle formation by palladium-catalyzed C-H/N-H coupling is presented. The method employs a picolinamide directing group, PhI(OAc)(2) oxidant, and toluene solvent at 80-120 °C. Cyclization is effective for sp(2) as well as aliphatic and benzylic sp(3) C-H bonds.     

C-H...N and C-H...S hydrogen bonds--influence of hybridization on their strength

Simple complexes connected through C-H...S and C-H...N interactions are investigated: CH4...NH3, C2H4...NH3, C2H2...NH3, CH4...SH2, C2H4...SH2, and C2H2...SH2. Ab initio and DFT calculations are performed (SCF, MP2, B3LYP) using different basis sets up to the MP2/aug-cc-pVQZ//MP2/aug-cc-pVDZ level of approximation. The Bader theory is applied since MP2/6-311++G(d,p) wave functions are used to find and to characterize bond critical points in terms of electron densities and their Laplacians. The influence of hybridization on the properties of C-H...S and C-H...N systems is also studied showing that the strength of such interactions increases in the following order: C(sp3)-H...Y, C(sp2)-H...Y, C(sp)-H...Y, where Y = S, N--it is in line with the previous findings on C-H...O hydrogen bonds. The results also show that CH4...SH2 and C2H4...SH2 complexes should be rather classified as van der Waals interactions and not as hydrogen bonds. The frequency associated with the C-H stretch of C(sp3)-H...S is blue-shifted.     

Highly efficient copper-catalyzed nitro-Mannich type reaction: cross-dehydrogenative-coupling between sp3 C-H bond and sp3 C-H bond

A novel C-C bond formation method was developed via the cross-dehydrogenative-coupling (CDC) reaction catalyzed by using copper bromide in the presence of an oxidizing reagent, tert-BuOOH. The CDC reaction provides a simple and efficient catalytic method to construct beta-nitroamine via the reaction between sp3 C-H and sp3 C-H bonds.     

Catalytic allylic alkylation via the cross-dehydrogenative-coupling reaction between allylic sp3 C-H and methylenic sp3 C-H bonds

A catalytic allylic alkylation was developed via the cross-dehydrogenative-coupling reaction of allylic sp3 C-H and methylenic sp3 C-H catalyzed by copper bromide and cobalt chloride in the presence of an oxidizing reagent, t-BuOOH. This methodology provides a direct way to use allylic sp3 C-H bonds for forming C-C bonds.     

Copper(II)-catalyzed ortho-functionalization of 2-arylpyridines with acyl chlorides

Copper-catalyzed ortho-benzoxylation of 2-arylpyridine sp(2) C-H bonds with acyl chloride is described. Notably, switching the base from t-BuOK to Li(2)CO(3) causes chlorination of the C-H bond to take place.     

Palladium-catalyzed oxidative alkynylation of heterocycles with terminal alkynes under air conditions

Pd-Catalyzed oxidative alkynylation of azoles with terminal alkynes was developed via simultaneous activation of both heterocyclic sp(2) C-H and alkynyl sp C-H bonds. The choice of palladium catalyst source and external base resulted in being important factors for performing the reaction with high efficiency and selectivity, and air was successfully utilized as an environmental oxidant in the present alkynylation procedure.     

C-H activation of terminal alkynes by tris-(3,5-dimethylpyrazolyl)boraterhodiumneopentylisocyanide: new metal-carbon bond strengths

C-H bond activation of terminal alkynes by [Tp'Rh(CNneopentyl)] (Tp' = hydridotris-(3,5-dimethylpyrazolyl)borate) resulted in the formation of terminal C-H bond activation products Tp'Rh(CNneopentyl)(C≡CR)H (R = t-Bu, SiMe(3), hexyl, CF(3), p-MeOC(6)H(4), Ph, and p-CF(3)C(6)H(4)). A combination of kinetic selectivity determined in competition reactions and activation energy for reductive elimination has allowed for the calculation of relative Rh-C(alkynyl) bond strengths. The bond strengths of Rh-C(alkynyl) products are noticeably higher than those of Rh-C(aryl) and Rh-C(alkyl) analogues. The relationship between M-C and C-H bond strengths showed a linear correlation (slope R(M-C/H-C) = 1.32), and follows energy correlations previously established for unsubstituted sp(2) and sp(3) C-H bonds in aliphatic and aromatic hydrocarbons.     

Palladium-catalyzed sp(3) CH activation of simple alkyl groups: direct preparation of indoline derivatives from N-alkyl-2-bromoanilines

The sp3 C-H activation of a simple alkyl group catalyzed by palladium(0) provides a novel and convenient strategy for the synthesis of various indolines from simple precursors, such as N-alkyl-2-bromoanilines. This study demonstrates that assisting moieties in the substrate such as a pyridine or quaternary carbon are not always necessary for sp3 C-H activation.     

Highly regioselective arylation of sp3 C-H bonds catalyzed by palladium acetate

A new palladium-catalyzed arylation process based on C-H activation has been developed. The utilization of pyridine-containing directing groups allows the beta-arylation of carboxylic acid derivatives and gamma-arylation of amine derivatives. Both primary and secondary sp3 C-H bonds, as well as sp2 C-H bonds, are reactive.     

CuBr-catalyzed direct indolation of tetrahydroisoquinolines via cross-dehydrogenative coupling between sp3 C-H and sp2 C-H bonds

A novel and efficient C-C bond formation method was developed via the cross-dehydrogenative coupling (CDC) reaction of indoles and tetrahydroisoquinolines catalyzed by copper bromide in the presence of an oxidizing reagent, tert-BuOOH. The CDC reaction provides a simple and efficient catalytic method to construct indolyl tetrahydroisoquinolines via a combination of sp3 C-H bond and sp2 C-H bond followed by C-C bond formation.     

Geometric isotope effect of various intermolecular and intramolecular C-H...O hydrogen bonds, using the multicomponent molecular orbital method

The geometric isotope effect (GIE) of sp- (acetylene-water), sp(2)- (ethylene-water), and sp(3)- (methane-water) hybridized intermolecular C-H...O and C-D...O hydrogen bonds has been analyzed at the HF/6-31++G level by using the multicomponent molecular orbital method, which directly takes account of the quantum effect of proton/deuteron. In the acetylene-water case, the elongation of C-H length due to the formation of the hydrogen bond is found to be greater than that of C-D. In contrast to sp-type, the contraction of C-H length in methane-water is smaller than that of C-D. After the formation of hydrogen bonds, the C-H length itself in all complexes is longer than C-D and the H...O distance is shorter than D...O, similar to the GIE of conventional hydrogen bonds. Furthermore, the exponent (alpha) value is decreased with the formation of the hydrogen bond, which indicates the stabilization of intermolecular C-H...O hydrogen bonds as well as conventional hydrogen bonds. In addition, the geometric difference induced by the H/D isotope effect of the intramolecular C-H...O hydrogen bond shows the same tendency as that of intermolecular C-H...O. Our study clearly demonstrates that C-H...O hydrogen bonds can be categorized as typical hydrogen bonds from the viewpoint of GIE, irrespective of the hybridizing state of carbon and inter- or intramolecular hydrogen bond.     

Efficient alkyl ether synthesis via palladium-catalyzed, picolinamide-directed alkoxylation of unactivated C(sp3)-H and C(sp2)-H bonds at remote positions

We report the efficient synthesis of alkyl ethers by the functionalization of unactivated sp(3)- and sp(2)-hybridized C-H bonds. In the Pd(OAc)(2)-catalyzed, PhI(OAc)(2)-mediated reaction system, picolinamide-protected amine substrates undergo facile alkoxylation at the γ or δ positions with a range of alcohols, including t-BuOH, to give alkoxylated products. This method features a relatively broad substrate scope for amines and alcohols, inexpensive reagents, and convenient operating conditions. This method highlights the emerging value of unactivated C-H bonds, particularly the C(sp(3))-H bond of methyl groups, as functional groups in organic synthesis.     

Investigation on the regioselectivities of intramolecular oxidation of unactivated C-H bonds by dioxiranes generated in situ

We found that dioxiranes generated in situ from ketones 1-6 and Oxone underwent intramolecular oxidation of unactivated C-H bonds at delta sites of ketones to yield tetrahydropyrans. From the trans/cis ratio of oxidation products 1a and 2a as well as the retention of the configuration at the delta site of ketone 5, we proposed that the oxidation reaction proceeds through a concerted pathway under a spiro transition state. The intramolecular oxidation of ketone 6 showed the preference for a tertiary delta C-H bond over a secondary one. This intramolecular oxidation method can be extended to the oxidation of the tertiary gamma' C-H bond of ketones 9 and 10. For ketone 11 with two delta C-H bonds and one gamma' C-H bond linked respectively by a sp(3) hydrocarbon tether and a sp(2) ester tether, the oxidation took place exclusively at the delta C-H bonds. Finally, by introducing proper tethers, regioselective hydroxylation of steroid ketones 12-14 have been achieved at the C-17, C-16, C-3, and C-5 positions.     

Platinum(IV) centres with agostic interactions from either sp² or sp³ C-H bonds

Agostic complexes of platinum(IV) have been isolated and characterised. A Pt(II) sp3 agostic complex maintains the agostic interaction upon oxidation giving a Pt(IV) sp3 agostic complex; in another Pt(IV) complex the agostic interaction from an sp2 C-H bond is sufficient to displace another ligand.