Hydrolytic cleavage of pyroglutamyl-peptide bond. V. selective removal of pyroglutamic acid from biologically active pyroglutamylpeptides in high concentrations of aqueous methanesulfonic acid

Application of aqueous methanesulfonic acid (MSA) for selective chemical removal of pyroglutamic acid (pGlu) residue from five biologically active pyroglutamyl-peptides (pGlu-X-peptides, X=amino acid residue at position 2) was examined. Gonadotropin releasing hormone (Gn-RH), dog neuromedin U-8 (d-NMU-8), physalaemin (PH), a bradykinin potentiating peptide (BPP-5a) and neurotensin (NT) as pGlu-X-peptides were incubated in either 70% or 90% aqueous MSA at 25 degrees C. HPLC analysis of the incubation solutions showed that the main decomposition product was H-X-peptide derived from each pGlu-X-peptide by the removal of pGlu. The results revealed that the pGlu-X peptide bond had higher susceptibility than various internal amide bonds in the five peptides examined, including the Trp-Ser bond in Gn-RH, the C-terminal Asn-NH(2) in d-NMU-8, and the Asp-Pro bond in PH, whose acid susceptibility is well known. Thus, mild hydrolysis with high concentrations of aqueous MSA may be applicable to chemically selective removal of pGlu from pGlu-X-peptides for structural examinations.     

Approaches to open fullerenes: synthesis and kinetic stability of diels-alder adducts of substituted isobenzofurans and C60

We have examined the reactions of 1,3-disubstituted isobenzofurans with the fullerene C60 in the context of an approach to open a large orifice on the fullerene framework. A variety of substituted isobenzofurans (6a-h), generated from the reaction of 1,4-substituted 1,4-epoxynaphthalenes 3a-h with 3,6-bis(2-pyridyl)-1,2,4,5-tetrazine (4a) or 1,2,4,5-tetrazine (4b), were added to C60 to afford the Diels-Alder adducts 7a-h. The thermal stability of these adducts toward retro-Diels-Alder fragmentation differs greatly in solution from that in the solid state. In solution, the relatively facile retro-Diels-Alder fragmentation of monoadducts 7a and 7c, to give C60 and the free isobenzofurans 6a and 6c, have rate constants (and activation barriers) of k=9.29x10(-5) s-1 at 70 degrees C (Ea=32.6 kcal mol-1) and k=1.36x10(-4) s-1 at 40 degrees C (Ea=33.7 kcal mol-1), respectively, indicating that the addition of isobenzofurans to C60 is readily reversible at those temperatures. In the solid state, thermogravimetric analysis of adduct 7a indicates that its decomposition occurs only within the temperature range of 220-300 degrees C. As a result, these compounds can be stored at room temperature in the solid state for several weeks without significant decomposition but have to be handled within several hours in solution.     

Small organoselenium molecules. 1. Dimethyl selenoxide: structure,complexation, and gas-phase transformation

For the first time the structural characterization of dimethyl selenoxide coordinated to metal complexes has been performed confirming the Me(2)SeO arrangement assigned by spectroscopic techniques for the molecule in solution and solid state. The structure of Me(2)SeO is trigonal pyramidal with Se-O and Se-C bond lengths of 1.70 and 1.92 A, respectively, and sigma(X-Se-Y) = 301 degrees. As a ligand, dimethyl selenoxide was found to bind to the rhodium centers of various Lewis acidity strengths by using only its oxo functionality in both terminal and bridging fashions. This O-directed coordination preference contrasts with an ambidentate (-S and -O) binding character revealed by dimethyl sulfoxide upon formation of analogous donor-acceptor complexes. The study of dimethyl selenoxide in the gas phase at 135-140 degrees C resulted in a thermal degradation of this molecule. The major decomposition product has been entrapped by a metal complex and identified as dimethyl selenide. The isolation of the coordinated Me(2)Se fragment clearly demonstrates that the Me(2)SeO molecule is less thermally stable than Me(2)SO, which under similar reaction conditions shows no sign of decomposition at temperatures up to 160 degrees C.     

Structure determination of a peptide model of the repeated helical domain in Samia cynthia ricini silk fibroin before spinning by a combination of advanced solid-state NMR methods

Fibrous proteins unlike globular proteins, contain repetitive amino acid sequences, giving rise to very regular secondary protein structures. Silk fibroin from a wild silkworm, Samia cynthia ricini, consists of about 100 repeats of alternating polyalanine (poly-Ala) regions of 12-13 residues in length and Gly-rich regions. In this paper, the precise structure of the model peptide, GGAGGGYGGDGG(A)(12)GGAGDGYGAG, which is a typical repeated sequence of the silk fibroin, was determined using a combination of three kinds of solid-state NMR studies; a quantitative use of (13)C CP/MAS NMR chemical shift with conformation-dependent (13)C chemical shift contour plots, 2D spin diffusion (13)C solid-state NMR under off magic angle spinning and rotational echo double resonance. The structure of the model peptide corresponding to the silk fibroin structure before spinning was determined. The torsion angles of the central Ala residue, Ala(19), in the poly-Ala region were determined to be (phi, psi) = (-59 degrees, -48 degrees ) which are values typically associated with alpha-helical structures. However, the torsion angles of the Gly(25) residue adjacent to the C-terminal side of the poly-Ala chain were determined to be (phi, psi) = (-66 degrees, -22 degrees ) and those of Gly(12) and Ala(13) residues at the N-terminal of the poly-Ala chain to be (phi, psi) = (-70 degrees, -30 degrees ). In addition, REDOR experiments indicate that the torsion angles of the two C-terminal Ala residues, Ala(23) and Ala(24), are (phi, psi) = (-66 degrees, -22 degrees ) and those of N-terminal two Ala residues, Ala(13) and Ala(14) are (phi, psi) = (-70 degrees, -30 degrees ). Thus, the local structure of N-terminal and C-terminal residues, and also the neighboring residues of alpha-helical poly-Ala chain in the model peptide is a more strongly wound structure than found in typical alpha-helix structures.     

Toward a general strategy for the synthesis of heterobimetallic coordination complexes for use as precursors to metal oxide materials: synthesis, characterization, and thermal decomposition of Bi(2)(Hsal)(6).M(acac)(3) (M = Al, Co, V, Fe, Cr)

Bismuth(III) salicylate, [Bi(Hsal)(3)](n), reacts readily with the trivalent metal beta-diketonate compounds M(acac)(3) (acac = acetylacetonate; M = Al, V, Cr, Fe, Co) to produce trinuclear coordination complexes of the general formula Bi(2)(Hsal)(6).M(acac)(3) (M = Al, V, Cr, Fe, Co) in 60-90% yields. Spectroscopic and single crystal X-ray diffraction experiments indicate that these complexes possess an unusual asymmetric nested structure in both solution and solid state. Upon standing in dichloromethane solution, Bi(2)(Hsal)(6).Co(acac)(3) eliminates Bi(Hsal)(3) to give the 1:1 adduct Bi(Hsal)(3).Co(acac)(3). The 2:1 heterobimetallic molecular compounds undergo facile thermal decomposition on heating in air to 475 degrees C to produce heterometallic oxide materials, which upon annealing for 2 h at 700 degrees C form crystalline oxide materials. The synthetic approach detailed here represents a unique, general approach to the formation of heterobimetallic bismuth-based coordination complexes via the coordination of M(acac)(3) complexes to bismuth(III) salicylate.     

Light-scattering study of the aggregation of syndiotactic poly(methyl methacrylate) in solution.

Syndiotactic poly(methyl methacrylate (s-PMMA) may undergo aggregation in n-butyl chloride (n-BuCl) at temperatures below the theta temperature. The aggregation behavior of the s-PMMA with weight-average molecular weight M(w) =6.06 x 10(5) g mol(-1) was studied by a combination of static and dynamic laser-light-scattering experiments. A solution of concentration 1.12 x 10(-4) g mL(-1) was quenched from 50 degrees C (above the theta temperature in n-BuCl, 35 degrees C to 12 degrees C, and the aggregation process was measured over 60 h. The time dependence of M(w) the root-mean-square z-average radius of gyration < R(g) >, and the average hydrodynamic radius were used to monitor the growth of the aggregates, with the result M(w) approximately < R(g) > d(f) (where d(f) = 1.98 +/- 0.02), which implies the formation of a fractal aggregate. The observed fractal dimension, d(f), is close to that expected for a reaction-limited cluster aggregation for which d(f) = 2.1. In addition, atomic force microscopy was used to image the aggregates.     

Aqueous two-phase systems containing self-associating block copolymers. Partitioning of hydrophilic and hydrophobic biomolecules.

A series of proteins and one membrane-bound peptide have been partitioned in aqueous two-phase systems consisting of micelle-forming block copolymers from the family of Pluronic block copolymers as one polymer component and dextran T500 as the other component. The Pluronic molecule is a triblock copolymer of the type PEO-PPO-PEO, where PEO and PPO are poly(ethylene oxide) and poly(propylene oxide), respectively. Two different Pluronic copolymers were used, P105 and F68, and the phase diagrams were determined at 30 degrees C for these polymer systems. Since the temperature is an important parameter in Pluronic systems (the block copolymers form micellar-like aggregates at higher temperatures) the partitioning experiments were performed at 5 and 30 degrees C, to explore the effect of temperature-triggered micellization on the partitioning behaviour. The temperatures correspond to the unimeric (single Pluronic chain) and the micellar states of the P105 polymer at the concentrations used. The degree of micellization in the F68 system was lower than that in the P105 system, as revealed by the phase behaviour. A membrane-bound peptide, gramicidin D, and five different proteins were partitioned in the above systems. The proteins were lysozyme, bovine serum albumin, cytochrome c, bacteriorhodopsin and the engineered B domain of staphylococcal protein A, named Z. The Z domain was modified with tryptophan-rich peptide chains in the C-terminal end. It was found that effects of salt dominated over the temperature effect for the water-soluble proteins lysozyme, bovine serum albumin and cytochrome c. A strong temperature effect was observed in the partitioning of the integral membrane protein bacteriorhodopsin, where partitioning towards the more hydrophobic Pluronic phase was higher at 30 degrees C than at 5 degrees C. The membrane-bound peptide gramicidin D partitioned exclusively to the Pluronic phase at both temperatures. The following trends were observed in the partitioning of the Z protein. (i) At the higher temperature, insertion of tryptophan-rich peptides increased the partitioning to the Pluronic phase. (ii) At the lower temperature, lower values of K were observed for ZT2 than for ZT1.     

Synthesis, crystal structure, and H/D exchange of the inside protonated form of the cage imine 4,8,12-triaza-1-azoniatricyclo[6.6.3.2(4,12)]nonadec-1(15)-ene. A model for proton transfer through an aliphatic membrane

The reaction of the inside protonated form of the tricyclic amine 1,4,8,12-tetraazatricyclo[6.6.3.2(4,12)]nonadecane (1) with iron(III) affords the inside monoprotonated form of the corresponding imine 4,8,12-triaza-1-azoniatricyclo[6.6.3.2(4,12)]nonadec-1(15)-ene (2), which was isolated as the tetrabromozincate salt (2a) in a yield of 78%. The crystal structure of 2a has been solved by X-ray diffraction at T = 120 K. In the imine cation the acidic hydrogen atom and the lone pairs of the nitrogen atoms are oriented toward the inside of the cavity. The acidic hydrogen atom is bound to a nitrogen atom belonging to the triazacyclononane entity. The imine double bond is situated between the N-atom of the triazacyclononane entity and the C-atom belonging to one of the three trimethylene bridges. The imine 2 is stable in acidic solution and the inside coordinated proton is very robust in acidic solution. In basic solution the imine reacts fast to give a quantitative formation of the inside protonated form of the hemiaminal 1,4,8,12-tetraazatricyclo[6.6.3.2(4,12)]nonadecan-5-ol (3). The equilibrium constant K(im) = [3][H(+)]/[2] was determined at three different temperatures from potentiometric measurements, which gave K(im) = 1.57(1) x 10(-5) M at 25 degrees C, Delta S degrees = -83(1) J mol(-1) K(-)(1),and Delta H degrees = 2.6(3) kJ mol(-1) at I = 1.0 M (NaCl). The inside coordinated proton in 3 is labile in basic solution and the rate for NH/ND exchange was determined by (1)H NMR at three different temperatures. The reaction followed the expression k(obs) = k(ex)[OD(-)] with k(ex) = 0.0978(30) dm(3) mol(-1) s(-1) at 25 degrees C, Delta S(++) = 87(4) J mol(-1) K(-1), and Delta H(++) = 104.9(11) kJ mol(-1) at I = 1.0 M (NaCl). The exchange rate is more than 5 x 10(6) times faster than that of the parent saturated cage 1. This extreme enhancement of reactivity is explained by an intramolecular proton transfer reaction mediated by hydroxy and oxy groups flipping in and out of the cavity, which mechanistically has resemblance to the transport of ions in a biological system.     

Inhibition of the beta-cyclodextrin catalyzed dediazoniation of 4-nitrobenzenediazonium tetrafluoroborate. blocking effect of sodium dodecyl sulfate

We have investigated the effects of sodium dodecyl sulfate, SDS, on the reaction between 4-nitrobenzenediazonium, 4NBD, ions and beta-cyclodextrin, beta-CD, under acidic conditions at T = 60 degrees C by employing a combination of spectrophotometric, chromatographic, and conductometric techniques. Previous studies under acidic conditions indicate that the secondary -OH groups of beta-CD solvate 4NBD ions, which are included in the beta-CD cavity, leading to the formation of a highly unstable transient diazo ether complex that undergoes homolytic fragmentation with an observed rate constant about 1700 times higher than that in pure aqueous acid solution (t(1/2) = 6 h at T = 60 degrees C) when [beta-CD]/[4NBD] = 40. Addition of SDS to a 4NBD/beta-CD system makes the k(obs) values decrease up to its value in a SDS micellar solution, which is similar to that in aqueous acid solution. Dediazoniation product distribution is significantly affected; the reaction between 4NBD and beta-CD ([beta-CD]/[4NBD] = 40), in the absence of SDS, proceeds exclusively through a homolytic mechanism leading to the quantitative formation of nitrobenzene, ArH, but addition of SDS turns over the mechanism by promoting the heterolytic mechanism. In addition, mixtures of 4-nitrophenol, ArOH, and ArH dediazoniation products are formed; their relative yields depend on the amount of added SDS so that at very high [SDS(T)], the heterolytic mechanism becomes the predominant one. Results are consistent with conductometric measurements showing that addition of beta-CD to an aqueous surfactant solution inhibits micelle formation and elevates CMC(app) values because CD encapsulation of surfactant monomers competes with the micellization process and are interpreted in terms of SDS monomers blocking the beta-CD cavity by forming a nonreactive complex, releasing 4NBD to the bulk solution.     

Controlled nitroxide-mediated styrene surface graft polymerization with atmospheric plasma surface activation

Polymer layer growth by free radical graft polymerization (FRGP) and controlled nitroxide-mediated graft polymerization (NMGP) of polystyrene was achieved by atmospheric pressure hydrogen plasma surface activation of silicon. Kinetic polystyrene layer growth by atmospheric pressure plasma-induced FRGP (APPI-FRGP) exhibited a maximum surface-grafted layer thickness (125 A after 20 h) at an initial monomer concentration of [M] 0 = 2.62 M at 85 degrees C. Increasing both the reaction temperature ( T = 100 degrees C) and initial monomer concentration ([M] 0 = 4.36 M) led to an increased initial film growth rate but a reduced polymer layer thickness, due to uncontrolled thermal initiation and polymer grafting from solution. Controlled atmospheric pressure plasma-induced NMGP (APPI-NMGP), using 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO), exhibited a linear increase in grafted polystyrene layer growth with time due to controlled surface graft polymerization as well as reduced uncontrolled solution polymerization and polymer grafting, resulting in a polymer layer thickness of 285 A after 60 h at [TEMPO] = 10 mM, [M] 0 = 4.36 M, and T = 120 degrees C. Atomic force microscopy (AFM) surface analysis demonstrated that polystyrene-grafted surfaces created by APPI-NMGP exhibited a high surface density of spatially homogeneous polymer features with a low root-mean-square (RMS) surface roughness ( R rms = 0.36 nm), similar to that of the native silicon surface ( R rms = 0.21 nm). In contrast, polymer films created by APPI-FRGP at [M] 0 = 2.62 M demonstrated an increase in polymer film surface roughness observed at reaction temperatures of 85 degrees C ( R rms = 0.55 nm) and 100 degrees C ( R rms = 1.70 nm). The present study concluded that the current approach to APPI controlled radical polymerization may be used to achieve a grafted polymer layer with a lower surface roughness and a higher fractional coverage of surface-grafted polymers compared to both conventional FRGP and APPI-FRGP.     

Structure-activity relationships of rat neuromedin U for smooth muscle contraction.

Rat neuromedin U (r-NMU) and its fragment peptide amides were synthesized by solid-phase methodology. Using a chicken crop smooth muscle contraction assay, the potency of r-NMU and its fragments relative to porcine neuromedin U-8 (p-NMU-8) was r-NMU: 10.25 +/- 2.88, r-NMU (6-23): 8.01 +/- 1.04, r-NMU (10-23): 2.76 +/- 0.46, r-NMU (13-23): 2.81 +/- 0.52, and r-NMU (16-23): 0.88 +/- 0.19, respectively. Two heptapeptides, r-NMU (17-23) and r-NMU (16-22), had a relative potency of 0.61 and 0.03 respectively, and elicited maximal contraction at a dose of 10 microM to a similar degree to p-NMU-8. The other shorter C-terminal fragments did not elicit the maximal contraction or any activity. In a rat uterus contraction assay, r-NMU (13-23), but not r-NMU (16-23), at a dose of 4 nM retained as high a stimulatory activity as r-NMU itself. r-NMU (17-22) was the smallest peptide fragment to elicit the maximal sustained contraction at 10 microM. These results indicate that the amino acid sequence Phe-Leu-Phe-Arg-Pro-Arg, corresponding to positions 17 to 22 of r-NMU, may be essential for contractile activity. N-terminal peptide segments Tyr-Gln-Gly-Pro corresponding to positions 6 to 9, and Ser-Gly-Gly corresponding to positions 13 to 15, appear to be of special importance for potent activity.     

Embracing C(60) with multiarmed geodesic partners.

1,3,5,7,9-Pentakis(4-methoxyphenylthio)corannulene (3), 1,3,5,7,9-pentakis(2-naphthylthio)corannulene (4), and 1,3,6,8-tetrakis(4-methoxyphenylthio)corannulene (5b) have been synthesized by chlorination of corannulene with ICl in CH(2)Cl(2) at 25 degrees C and subsequent nucleophilic aromatic substitution with the appropriate sodium thiophenolate in DMEU at 25 degrees C. (1)H NMR titration studies demonstrate that these novel bowl-shaped hosts form 1:1 complexes with C(60) in toluene-d(8) solution with association constants of 454, 368, and 280 M(-1), respectively.     

Microsecond melting of a folding intermediate in a coiled-coil peptide, monitored by T-jump/UV Raman spectroscopy

A truncated version of the GCN4 coiled-coil peptide has been studied by ultraviolet resonance Raman (UVRR) spectroscopy with 197 nm excitation, where amide modes are optimally enhanced. Although the CD melting curve could be satisfactorily described with a two-state transition having Tm = 30 degrees C, singular value decomposition of the UVRR data yielded three principal components, whose temperature dependence implicates an intermediate form between the folded and unfolded forms, with formation and melting temperatures of 10 and 40 degrees C. Two alpha-helical amide III bands, at 1340 and 1300 cm(-1), melted out selectively at 10 and 40 degrees C, respectively, and are assigned to hydrated and unhydrated helical regions. The hydrated regions are proposed to be melted in the intermediate form, while the unhydrated regions are intact. Time-resolved UVRR spectra following laser-induced temperature jumps revealed two relaxations, with time constants of 0.2 and 15 mus. These are suggested to reflect the melting times of hydrated and unhydrated helices. The unhydrated helical region may be associated with a 14-residue "trigger" sequence that has been identified in the C-terminal half of GCN4. Dehydration of helices may be a key step in the folding of coiled-coils.     

Aryl Oxalate Derivatives as Convenient Precursors for Generation of Aryloxyl Radicals

The use of aryloxy oxalyl chlorides (AOCs), aryloxy oxalyl tert-butyl peroxides (AOBs), and diaryl oxalates (DAOs) for unimolecular generation of phenoxyl-based radicals under solution and rigid matrix conditions is described. AOCs are usable for photochemical generation of phenoxyl radicals, but are only conveniently stable as precursors when 2,6-di-tert-butylated derivatives are used. AOBs may be used as thermal precursors to aryloxyl radicals, since they typically decompose within 2-3 h at 60-85 degrees C to give phenols. (1)H-NMR solution kinetic studies find that DeltaH() = 31 kcal/mol, and DeltaS() = +3.4 cal/mol-K for decomposition of phenoxyoxalyl tert-butyl peroxide, consistent with substantial concertedness in peroxide bond cleavage. AOBs and the more stable DAOs are also convenient photochemical phenoxyl radical precursors. AOBs yield phenoxyl radicals more readily by photolysis than do corresponding DAOs, but the DAOs have fewer side reactions that can quench the product phenoxyl radicals.     

Temperature responsive complex coacervate core micelles with a PEO and PNIPAAm corona

In aqueous solutions at room temperature, poly( N-methyl-2-vinyl pyridinium iodide)- block-poly(ethylene oxide), P2MVP 38- b-PEO 211 and poly(acrylic acid)- block-poly(isopropyl acrylamide), PAA 55- b-PNIPAAm 88 spontaneously coassemble into micelles, consisting of a mixed P2MVP/PAA polyelectrolyte core and a PEO/PNIPAAm corona. These so-called complex coacervate core micelles (C3Ms), also known as polyion complex (PIC) micelles, block ionomer complexes (BIC), and interpolyelectrolyte complexes (IPEC), respond to changes in solution pH and ionic strength as their micellization is electrostatically driven. Furthermore, the PNIPAAm segments ensure temperature responsiveness as they exhibit lower critical solution temperature (LCST) behavior. Light scattering, two-dimensional 1H NMR nuclear Overhauser effect spectrometry, and cryogenic transmission electron microscopy experiments were carried out to investigate micellar structure and solution behavior at 1 mM NaNO 3, T = 25, and 60 degrees C, that is, below and above the LCST of approximately 32 degrees C. At T = 25 degrees C, C3Ms were observed for 7 < pH < 12 and NaNO 3 concentrations below approximately 105 mM. The PEO and PNIPAAm chains appear to be (randomly) mixed within the micellar corona. At T = 60 degrees C, onion-like complexes are formed, consisting of a PNIPAAm inner core, a mixed P2MVP/PAA complex coacervate shell, and a PEO corona.     

Chemical stability of nonwetting, low adhesion self-assembled monolayer films formed by perfluoroalkylsilanization of copper

A self-assembled monolayer (SAM) has been produced by reaction of 1H,1H,2H,2H-perfluorodecyldimethylchlorosilane (PFMS) with an oxidized copper (Cu) substrate and investigated by x-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), friction force microscopy (FFM), a derivative of AFM, and contact angle measurement. FFM showed a significant reduction in the adhesive force and friction coefficient of PFMS modified Cu (PFMS/Cu) compared to unmodified Cu. The perfluoroalkyl SAM on Cu is found to be extremely hydrophobic, yielding sessile drop static contact angles of more than 130 degrees for pure water and a "surface energy" (which is proportional to the Zisman critical surface tension for a Cu surface with 0 rms roughness) of 14.5 mJm2(nMm). Treatment by exposure to harsh conditions showed that PFMS/Cu SAM can withstand boiling nitric acid (pH=1.8), boiling water, and warm sodium hydroxide (pH=12, 60 degrees C) solutions for at least 30 min. Furthermore, no SAM degradation was observed when PFMS/Cu was exposed to warm nitric acid solution for up to 70 min at 60 degrees C or 50 min at 80 degrees C. Extremely hydrophobic (low surface energy) and stable PFMS/Cu SAMs could be useful as corrosion inhibitors in micro/nanoelectronic devices and/or as promoters for antiwetting, low adhesion surfaces or dropwise condensation on heat exchange surfaces.     

pH-specific aqueous synthetic chemistry in the binary cadmium(II)-citrate system. Gaining insight into cadmium(II)-citrate speciation with relevance to cadmium toxicity

The involvement of Cd(II) in toxic manifestations and pathological aberrations in lower and higher organisms entails interactions with low and high molecular mass biological targets. To understand the relevant chemistry in aqueous media, we have launched pH-dependent synthetic efforts targeting Cd(II) with the physiological ligand citric acid. Reactions of Cd(II) with citric acid upon the addition of NaOH at pH 2.5 and pyridine at pH 3 and the addition of ammonia at pH approximately 7 led to the new complexes [Cd3(C6H5O7)2(H2O)5] x H2O (1) and (NH4)[Cd(C6H5O7)(H2O)] x H2O (2), respectively. Complexes 1 and 2 were characterized by elemental analysis, spectroscopy (FT-IR and NMR), and X-ray crystallography. Complex 1 crystallizes in the monoclinic space group P2(1)/n, with a = 18.035(6) A, b = 10.279(4) A, c = 12.565(4) A, beta = 109.02(1) degrees, V = 2202(2) A3, and Z = 4. Complex 2 crystallizes in the monoclinic space group P2(1), with a = 9.686(4) A, b = 8.484(4) A, c = 7.035(3) A, beta = 110.28(1) degrees, V = 542.3(4) A3, and Z = 2. Complex 1 is a trinuclear assembly with the citrate ligand securing a stable metallacyclic ring around one Cd(II), with the terminal carboxylates spanning into the coordination sphere of two nearby Cd(II) ions. Complex 2 contains mononuclear units of Cd(II) bound by citrate in an overall coordination number of 8. In both 1 and 2, the participating citrates exhibit three different modes of coordination, thus projecting a distinct yet variable aqueous structural chemistry of Cd(II) with physiological substrates. The pH-dependent chemistry and its apparent structural diversity validate past solution speciation studies, projecting the existence of mononuclear species such as the one in the anion of 2. The spectroscopic and structural properties of 2 emphasize the significance of the information emerging from synthetic studies that otherwise would not have been revealed through conventional solution studies, while concurrently shedding light onto the linkage of the requisite chemistry with the potential biological toxicity of Cd(II).     

Molecular precursors for ferroelectric materials: synthesis and characterization of Bi2M2(mu-O)(sal)4(Hsal)4(OEt)2 and BiM4(mu-O)4(sal)4(Hsal)3(O(i)Pr)4 (sal = O2CC6H4O,Hsal = O2CC6H4OH) (M = Nb,Ta)

Reactions between triphenyl bismuth, salicylic acid, and niobium or tantalum ethoxide have been explored. Four new coordination complexes incorporating bismuth and the group 5 metals niobium or tantalum have been synthesized and characterized spectroscopically, by elemental analysis, and by single crystal X-ray diffraction. The new complexes are Bi(2)M(2)(mu-O)(sal)(4)(Hsal)(4)(OEt)(2) (1a, M = Nb; 1b, M = Ta) and BiM(4)(mu-O)(4)(sal)(4)(Hsal)(3)(O(i)Pr)(4) (sal = O(2)CC(6)H(4)-2-O, Hsal = O(2)CC(6)H(4)-2-OH) (2a, M = Nb; 2b, M = Ta). Complexes 1a and 1b are isomorphous, as are 2a and 2b. The thermal and hydrolytic decomposition of 1a has been explored by DT/TGA and powder X-ray diffraction, while scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) were used to characterize the morphology and composition of the oxides. The heterobimetallic molecules are completely converted to the amorphous bimetallic oxide by heating to 500 degrees C in air. Decomposition of 1a or 1b at 650 degrees C produces the metastable high temperature form of BiNbO(4) as the major crystalline oxide phase. Heating samples of 1a to 850 degrees C favors conversion of the materials to the low temperature phase as well as disproportionation into Bi(5)Nb(3)O(15) and Nb(2)O(5). Thermal decomposition of 1a and 1b produces porous oxides, while hydrolytic decomposition of the complexes has been shown to produce nanometer scale bimetallic oxide particles. The potential of the complexes to act as single-source precursors for ferroelectric materials is considered.     

Mechanisms of NO release by N1-nitrosomelatonin: nucleophilic attack versus reducing pathways

A new type of physiologically relevant nitrosamines have been recently recognized, the N(1)-nitrosoindoles. The possible pathways by which N(1)-nitrosomelatonin (NOMel) can react in physiological environments have been studied. Our results show that NOMel slowly decomposes spontaneously in aqueous solution, generating melatonin as the main organic product (k = (3.7 +/- 1.1) x 10(-5) s(-1), Tris-HCl (0.2 M) buffer, pH 7.4 at 37 degrees C, anaerobic). This rate is accelerated by acidification (k(pH 5.8) = (4.5 +/- 0.7) x 10(-4) s(-1), k(pH 8.8) = (3.9 +/- 0.6) x 10(-6) s(-1), Tris-HCl (0.2 M) buffer at 37 degrees C), by the presence of O(2) (k(o) = (9.8 +/- 0.1) x 10(-5) s(-1), pH 7.4, 37 degrees C, [NOMel] = 0.1 mM, P(O(2)) = 1 atm), and by the presence of the spin trap TEMPO (2,2,6,6-tetramethylpiperidine 1-oxyl; k(o) = (2.0 +/- 0.1) x 10(-4) s(-1), pH 7.4, 37 degrees C, [NOMel] = 0.1 mM, [TEMPO] = 9 mM). We also found that NOMel can transnitrosate to l-cysteinate, producing S-nitrosocysteine and melatonin (k = 0.127 +/- 0.002 M(-1) s(-1), Tris-HCl (0.2 M) buffer, pH 7.4 at 37 degrees C). The reaction of NOMel with ascorbic acid as a reducing agent has also been studied. This rapid reaction produces nitric oxide and melatonin. The saturation of the observed rate constant (k = (1.08 +/- 0.04) x 10(-3) s(-1), Tris-HCl (0.2 M) buffer, pH 7.4 at 37 degrees C) at high ascorbic acid concentration (100-fold with respect to NOMel) and the pH independence of this reaction in the pH range 7-9 indicate that the reactive species are ascorbate and melatonyl radical originated from the reversible homolysis of NOMel. Taking into account kinetic and DFT calculation data, a comprehensive mechanism for the denitrosation of NOMel is proposed. On the basis of our kinetics results, we conclude that under physiological conditions NOMel mainly reacts with endogenous reducing agents (such as ascorbic acid), producing nitric oxide and melatonin.     

Substituent effects on the stereochemistry of gas-phase intracomplex nucleophilic substitutions

The mechanism and stereochemistry of the intracomplex solvolysis of proton-bound complexes [Y...H...M]+ between M = CH3 (18)OH and Y = 1-arylethanol [(S)-1-(para-tolyl)ethanol (1S), (S)-1-(para-chlorophenyl)ethanol (2S), (S)-1-(meta-alpha,alpha,alpha-trifluoromethylphenyl)ethanol (3S), (S)-1-(para-alpha,alpha,alpha-trifluoromethylphenyl)ethanol (4S), (R)-1-(pentafluorophenyl)ethanol (5R), (R)-alpha-(trifluoromethyl)benzyl alcohol (6R), and (R)-1-phenylethanol (7R)] have been investigated in the gas phase (CH3F; 720 Torr) in the 25-140 degrees C temperature range. Gas-phase solvolysis of [Y...H...M]+ (Y=2S, 3S, 4S, and 7R) leads to extensive racemization above a characteristic temperature t(#) (e.g. at t(#)>60 degrees C for 7R), whereas below that temperature the reaction displays a preferential retention of configuration. Predominant retention of configuration is instead observed in the intracomplex solvolysis of [Y...H...M]+ (Y=1S, 4S, 5R, and 6R) with the temperature range investigated (25 相似文献