快离子导体AgxTiS2中Ag+离子－空位的二维基态结构与能量性质研究

根据Ag⁺离子-空位的二维有序结构建立了三维晶胞模型.采用局域密度近似下的平面波赝势方法,对有序Ag_xTiS₂(x=0,1/4,1/3,1/2,2/3,3/4,1)系列进行了几何结构优化和总能量计算,并与Li_xTiS₂系列进行了对比研究.有序Ag_xTiS₂系统的晶格参量增量Δa_{关键词： x}TiS₂')" href="#">Ag_xTiS₂ 有序—无序相变 离子扩散 第一性原理计算     

阶梯化对快离子导体LixTiS2的结构与能量性质的影响

根据密度波理论建立了stage-2有序Li_xTiS₂(x=1/8,1/6,1/4,1/3,3/8,1/2)系统的晶胞模型.采用平面波赝势方法,对stage-2有序系统和stage-1有序Li_xTiS₂(x=0,1/4,1/3,1/2,2/3,3/4,1)系统进行了几何结构优化和总能量计算,并进行了对比研究.发现stage-2晶胞的参量c(d关键词： xTiS₂')" href="#">Li_xTiS₂ 阶梯结构 有序—无序相变 第一性原理计算     

关于Zn1-xBexO电子结构和光学性质的研究

采用基于密度泛函理论和平面波赝势技术的CASTEP程序对Zn_1-xBe_xO合金电子结构和光学性质进行了计算.当0≤x≤1,其带隙从0.963 eV变化到7.293 eV.分析了晶格畸变和能带间排斥效应对带隙的影响.当Be含量x=0.125,0.25,0.375,0.5,0.625,0.75时,a/b轴压应变控制着带隙变化;当x=0.875,1时,c轴压应变控制着带隙变化.能带间的p-d排斥影响价带顶变动,Γ_1v与Γ_1c之间排斥影响导带底变动.这些能带间的排斥效应被用来分析Zn_1-xBe_xO带隙变动.另外,也分析了Zn_1-xBe_xO介电函数虚部ε₂. 关键词： 带结构 光学性质 应变 排斥     

Bi2Te3-xSex(x≤3)同晶化合物电子结构的第一性原理研究

本文采用基于密度泛函理论的第一性原理全势能线性缀加平面波方法(FLAPW),分析了Bi₂Te_3-xSe_x体系中各原子自旋轨道耦合(SOI)的p_1/2修正对体系性质的影响,并对Bi₂Te_3-xSe_x(x≤3)同晶化合物的电子特性进行系统的理论研究,首次计算出Bi₂S 关键词： 2Te_3-xSe_x(x≤3)同晶化合物')" href="#">Bi₂Te_3-xSe_x(x≤3)同晶化合物 第一性原理 电子结构 自旋轨道耦合     

NFX(X=-1,0,+1)分子离子基态的结构与势能函数

用密度泛函理论的B3LYP方法,分别以6-311++g(df,3pd),6-311g(3d,3p)和6-311++g(3df,3pd)为基函数对NF分子、NF⁺和NF^-离子基态进行几何优化和频率计算,并进行单点能扫描计算.用最小二乘法拟合得到NF^X(X=-1,0,+1)分子离子基态的Murrell-Sorbie势能函数.利用得到的解析势能函数计算出的NF分子和NF⁺离子基态光谱常数(B_e,α_e,ω_e,ω_eχ_e)与实验值符合很好.首次得到NF^-离子基态的光谱常数(B_e,α_e,ω_e,ω_eχ_e)和力常数(f₂,f₃,f₄),为NF-离子基态的后期研究提供理论参考.     

新超导体MgCNi3的虚晶掺杂研究

用全势线性缀加平面波方法,考虑局域自旋密度近似研究虚晶掺杂MgCNi₃的超导电性和磁性.计算了自旋极化能带结构、体弹性模量和它对压力的导数、原子磁矩m及其变化率.计算结果表明，对于电子掺杂的Mg_1-xAl_xCNi₃(0≤x≤0.5)，超导电性和磁涨落随掺杂量的增加逐渐减小.空穴掺杂的Mg_1-xNa_xCNi₃,在x＝0.12处出现铁磁相变，超导电性消失.在MgCNi₃少量空穴掺杂区域(0≤x<0.12)，表现为超导与磁涨落共存的不稳定状态. 关键词： 超导电性 能带结构 态密度 磁性     

Au(110)表面结构和氧原子吸附的第一性原理研究

用密度泛函理论(DFT)研究了金属Au(110)表面结构以及氧原子的吸附状态.计算得到Au(110)-(1×2)缺列再构表面原子的弛豫分别是-15.0%(Δd₁₂/d₀)和-1.1%(Δd₂₃/d₀),表面能为52.7 meV/²,功函数Φ=5.00 eV;Au(110)-(1×3)缺列再构表面的Δd_{1 关键词： 缺列再构Au(110)表面 STM图像 氧原子吸附}     

SrAl12O19：Pr3+中4f2→4f2电偶极跃迁强度参量化

对SrAl₁₂O₁₉：Pr³⁺中4f²→4f²电偶极跃迁强度的参量化进行了研究.考虑明确的4f5d组态成分与4f²跃迁能级混杂对4f²组态内跃迁的影响.引入新的强度参数T_kq，参数值由³P₀能级的相关实验数据拟合.利用拟合的参数T₃₃和T₅₃计算¹S₀向下各能级发射的跃迁强度，计算值与实验及Judd-Ofelt理论的结果进行了比较. 关键词： 12O₁₉：Pr³⁺')" href="#">SrAl₁₂O₁₉：Pr³⁺ 宇称态混杂 4f5d组态 强度参数     

钒基固溶体储氢材料弹性性质第一性原理研究

采用基于密度泛函理论的第一性原理赝势平面波方法,计算了（59Cr-41Ti）_100－xV_x（x=5,15,30,60,80,100）六种钒基储氢合金的晶格常数、弹性性质和电子态密度,计算结果与实验值符合较好.发现当x=60时的钒基合金具有较好弹性性质,杨氏模量为14930 GPa,切变模量为5442 GPa及体弹模量为19396 GPa.结合实验循环性能分析认为在吸放氢过程中合金已经发生塑性变形,弹性 关键词： 钒基固溶体 储氢合金材料 密度泛函理论 弹性性质     

Y掺杂SrTiO3晶体材料的电子结构计算

采用基于第一性原理的密度泛函理论平面波超软赝势法, 研究了Y掺杂SrTiO₃体系的空间结构和电子结构性质, 得到了优化后体系的结构参数, 掺杂形成能, 能带结构和电子态密度. 对比掺杂浓度为0125, 025, 033时,Sr_1-xY_xTiO₃和SrTi_1-xY_xO₃的掺杂形成能,发现Y替代Sr能形成更稳定的结构. 对Sr_1-xY_xTiO₃（x=0, 0125, 025, 033） 的结构进行了优化,结果表明Y替代Sr后, 随着掺杂浓度增大, 体系的晶格常数逐渐减小, 稳定性逐渐增强. 对不同掺杂浓度的Sr_1-xY_xTiO₃能带结构的计算结果表明：纯净的SrTiO₃是绝缘体, 价带顶在R点, 导带底在Γ点, 费米能级处于价带顶; 掺杂Y后, 费米能级进入到导带底中, 体系呈金属性;掺杂浓度越大,费米能级进入导带的位置越深,禁带宽度也近似变宽. 关键词： 3')" href="#">SrTiO₃ 电子结构 掺杂 VASP     

Lithium ion conductive glass–ceramics with Li3Fe2(PO4)3 and YAG laser-induced local crystallization in lithium iron phosphate glasses

The glasses with the composition of 37.5Li₂O–(25 − x)Fe₂O₃–xNb₂O₅–37.5P₂O₅ (mol%) (x = 5,10,15) are prepared, and it is found that the addition of Nb₂O₅ is effective for the glass formation in the lithium iron phosphate system. The glass–ceramics consisting of Nasicon-type Li₃Fe₂(PO₄)₃ crystals with an orthorhombic structure are developed through conventional crystallization in an electric furnace, showing electrical conductivities of 3 × 10^− 6 Scm^− 1 at room temperature and the activation energies of 0.48 eV (x = 5) and 0.51 eV (x = 10) for Li⁺ ion conduction in the temperature range of 30–200 °C. A continuous wave Nd:YAG laser (wavelength: 1064 nm) with powers of 0.14–0.30 W and a scanning speed of 10 μm/s is irradiated onto the surface of the glasses, and the formation of Li₃Fe₂(PO₄)₃ crystals is confirmed from XRD analyses and micro-Raman scattering spectra. The crystallization of the precursor glasses is considered as new route for the fabrication of Li₃Fe₂(PO₄)₃ crystals being candidates for use as electrolyte materials in lithium ion secondary batteries.     

Structural and electronic properties of the Li-ion battery cathode material LixCoSiO4

The first-principles density functional theory has been employed to study the structural and electronic properties of Li_xCoSiO₄. The lattice stability of Li_xCoSiO₄ during the lithiation–delithiation process is discussed. The changes in the electronic structures of Li_xCoSiO₄ during the deintercalation of Li ions are also probed. It is found that Li₂CoSiO₄ reacts reversibly with 1 Li⁺ at an average voltage of 4.1 V versus a lithium anode. The computational results indicate that Li₂CoSiO₄ material is a potential candidate for high-capacity cathode for advanced lithium ion batteries.     

Anomalous bragg peak widths in LixTiS2

We have performed X ray diffraction experiments on Li_xTiS₂ and have found an experimental correlation between features observed in the (00?) peak width and -δx/δV data. (00?) peak broadening is indicative of imperfect order in the c direction of the lattice. This suggests that three dimensional models for lithium intercalation in TiS₂ should be investigated.     

The experimental and theoretical investigation of vibration spectra in ferroelectric semiconductor SbSBrxI1−x crystals

The vapor grown SbSBr_xI_1−x (x=0.1; 0.5; 0.9) crystals with clear mirror surfaces have been used for infrared reflection measurements with Fourier spectrometer. The vibration frequencies along c(z)-axis have been derived from Kramers–Kroning and optical parameters fitting analysis of the experimental reflectivity spectra at T=300 K. The theoretical vibration spectra of SbSBr_xS_1−x (x=0.1; 0.5; 0.9) crystals in paraelectric phase (T=300 K) along c(z)-axis have been determined in quasiharmonic approximation by diagonalization of dynamical matrix. The theoretical vibration spectra of these crystals in a–b(x−y) plane have been determined in harmonic approximation. In this work we discuss the nature of anharmonism in SbSBr_xI_1−x crystals along the c(z)-axis.     

Co(S1-xSex)2系统中的铁磁量子相变

针对Co(S_1-xSe_x)₂系统在x=0.11附近发生的铁磁金属到顺磁金属相变,制备了一系列不同Se替代浓度的多晶样品.通过对其结构和电阻率-温度ρ(T)关系的系统观测,结果发现,样品铁磁相变温度T_C随着Se替代浓度x值的增加,以(1-x)^1/2关系单调下降,其二级铁磁相变转变为一级相变 关键词： 量子相变 自旋量子涨落 1-xSe_x)₂')" href="#">Co(S_1-xSe_x)₂     

Ti1－xCrxO2±δ体系的相关系、晶体结构和磁性能研究

采用溶胶凝胶法制备了Ti_1-xCr_xO_2±δ体系系列样品.利用扫描电子显微镜(SEM)，X射线光电子能谱(XPS)，粉末X射线衍射分析(XRD)方法研究了Ti_1-xCr_xO_2±δ系列样品的颗粒尺寸、形貌、组分化学态、相关系和固溶区范围；并利用超导量子干涉磁强计对样品的磁性能进行了研究.采用Rietveld结构精修的方法研究了Cr的不同掺杂量对TiO₂晶体结构的影响，研究表明，1000℃烧结的样品的固溶区范围是x=0—0.03，为金红石单相；随着Cr掺杂量的增加，金红石相晶胞参数规律性地减小；当x>0.03，为金红石相和CrO₂相两相共存.综合XRD和磁性测量结果，500℃烧结的样品的固溶区范围是x=0—0.02，为锐钛矿单相；随着Cr掺杂量的增加，锐钛矿相晶胞参数规律性地减小；当x≥0.04，为锐钛矿相和绿铬矿相(Cr₂O₃)两相共存.XPS实验结果表明，500℃和1000℃退火的样品中Cr都是以Cr⁺³和Cr⁺⁶两种化学态存在，1000℃烧结的样品中可能有更多的Cr³⁺转化为Cr⁶⁺.根据M-H和M-T曲线的测试结果发现，本文500℃烧结的Ti_1-xCr_xO_2±δ体系样品当x=0—0.02时，为室温铁磁性.当x≥0.04时，由铁磁相和顺磁相所组成，在低温下有较强的铁磁性；室温下主要是顺磁相，铁磁相只占据很小的体积分数. 关键词： 1-xCr_xO_2±δ体系')" href="#">Ti_1-xCr_xO_2±δ体系 相关系 固溶区 磁性能     

Temperature dependence of the indirect band gap, steepness parameter and related optical constants of [Kx(NH4)1−x]2ZnCl4 mixed crystals

Optical transmittance measurements near the absorption edge of [K_x(NH₄)_1−x]₂ZnCl₄ mixed crystals, where x=0.00, 0.232, 0.522, 0.644, 0.859 and 1.00, are reported over 276–350 K range. Analysis reveals that the type of transition is the indirect allowed one. The absorption edge shifted towards lower energy with increasing temperature. It is shown that [K_x(NH₄)_1−x]₂ZnCl₄ mixed crystals with x0.644 reveal a phase transition at 319 K, this phase disappeared at high concentrations of K⁺ ions. The steepness parameter is given, its value is used to estimate the temperature dependence of the indirect energy gap. In the region of the absorption edge, the absorption coefficient obeys Urbach's rule. Urbach parameters are investigated as a function of temperature.     

Be-composition effect on structure, electronic and optical properties of BexZn1-xO alloys

This paper carries out first principles calculation of the structure,electronic and optical properties of Be x Zn 1 x O alloys based on the density-functional theory for the compositions x = 0.0,0.25,0.5,0.75,1.0.The lattice constants deviations of alloys obey Vegard’s law well.The Be x Zn 1 x O alloys have the direct band gap(Γ-Γ) character,and the bowing coefficients are less than the available theoretical values.Moreover,it investigates in detail the optical properties(dielectric functions,absorption spectrum and refractive index) of these ternary mixed crystals.The obtained results agree well with the available theoretical and experimental values.