Selectivity control in the separation of aromatic amino acid enantiomers with sulphated beta-cyclodextrin

Control of selectivity in the enantiomeric separation of three aromatic amino acids (phenylalanine, tyrosine and tryptophan) is demonstrated by electrokinetic capillary chromatography utilising temperature variations coupled with the use of sulphated-beta-cyclodextrin (s-beta-CD) as a pseudostationary phase. The concentration of s-beta-CD and temperature were used as experimental variables to control the observed selectivity. A double-coated capillary was used and proved very robust with reproducibility of migration times being <2.0% R.S.D. between runs and <2.6% on using a new capillary. The system was modelled successfully using an artificial neural network (ANN) comprising one input layer, two hidden layers and one output layer. The model accurately described the observed separations with a correlation coefficient of 0.999 being observed between predicted and observed migration times. Selectivity optimisation was achieved using the normalised resolution product and minimum resolution criteria, with both providing optima at different experimental conditions. The selectivity changes observed also allowed the estimation of electrolyte temperatures within the capillary at high operating currents (>100 microA). Using a 50 microm i.d. capillary and an electrolyte comprising 20 mM phosphate and 15 mM s-beta-CD, a temperature of 52 degrees C was calculated within the capillary at an applied voltage of +30 kV.     

Performance and selectivity of polymeric pseudostationary phases for the electrokinetic separation of amino acid derivatives and peptides

Two polymeric pseudostationary phases, one an acrylamide polymer and the second a siloxane polymer, have been investigated for the separation of naphthalene-2,3-dicarboxaldehyde (NDA)-derivatized amino acids and small peptides. The dervatized amino acids were detected by UV absorbance and laser-induced fluorescence (LIF) detection. The polymers provided very high efficiency and good selectivity for the separation of the amino acids. The separation selectivity using the polymers was significantly different from that of SDS micelles, and there were subtle differences in selectivities between the polymers. Although very good detection limits were obtained with LIF detection, a significant background signal was observed when the polymers were not washed to remove fluorescent impurities. The polymers did not separate the peptides very well. It is postulated that the fixed covalent structure of the polymers prevents them from interacting strongly or efficiently with the peptides, which are large in relation to the analytes typically separated by electrokinetic chromatography using polymers.     

Derivatives for separation of amino acid enantiomers

Summary An optimum gas chromatographic separation of all protein amino acids in one run on capillaries coated with Chirasil-Val is difficult to achieve. Overlap of enantiomers of different amino acids may occur because the relative retention times depend upon the overall polarity of the stationary phase, the film thickness and the actual temperature programm. Employment of different derivatives formed by esterification with isopropanol, n-propanol, isobutanol and n-butanol and by acylation with trifluoroacetic, pentafluoropropionic and heptafluorobutyric anhydrides yields patterns of relative elution of all amino acid enantiomers. Thus, even critical pairs of amino acid enantiomers can be separated or shifted in their relative retention times. All amino acid enantiomers can be separated and quantitatively estimated.     

Modelling,optimisation and control of selectivity in the separation of aromatic bases by electrokinetic chromatography using a neutral cyclodextrin as a pseudostationary phase

A simple mathematical model describing the separation of a series of aromatic bases by electrokinetic chromatography using beta-cyclodextrin (beta-CD) as a pseudostationary phase is described. The model takes into account changes in electrolyte pH and the different formation constants between the neutral and charged forms of the analytes with the CD. Constants in the model were obtained within the two-dimensional experimental space defined by pH and [beta-CD] with nonlinear regression using only five experimental points. These constants agreed with expected trends in analyte-CD interactions and predicted much higher formation constants for the neutral analyte-CD complex than for the charged analyte-CD complex. Correlation between predicted and observed mobilities using additional 20 points within the experimental space gave r(2) = 0.995. Optimisation of the pH and [beta-CD] was performed using both the normalised resolution product and minimum resolution product criteria and provided two optimum separations which exhibited different selectivities. Differences between predicted and observed migration times at these optima were less than 2.5 and 5% for the normalised resolution product and the minimum resolution criteria, respectively. In both cases the correct migration order was predicted. The model was also applied successfully to the optimisation of conditions for the separation of a specific mixture of analytes or for conditions under which particular analytes migrated in a desired order.     

Chiral ion-exchange capillary electrochromatography of arylglycine amides with dextran sulfate as a pseudostationary phase

A low-cost tunable chiral ion-exchange capillary electrochromatographic method has been developed for the separation of arylglycine amide racemic mixtures with dextran sulfate (DS) as an anionic and chiral pseudostationary phase and Tris-tartrate as a buffer system. The concentrations of DS and Tris had opposite influences on retention and resolution and could serve as ideal factors to finely tune the running speed and chiral resolution. Tartrate and pH largely impact the separation but pH should be confined within 3.0-5.5, only suitable for coarse tuning, while tartrate was preserved as the key buffering reagent, normally maintained at 40 mmol/L. With a working system composed of 0.1-1.0% DS, 20-60 mmol/L Tris, and 40 mmol/L tartrate at pH 3.50-4.50, the enantioresolution of arylglycine amides was shown to be dependent on their chemical structure: The chiral resolution increased when the hydrogen at the alpha-amino group or at the p-position of phenyl ring was replaced by other larger group(s) but the resolution decreased when the group at the o- or m-site on the phenyl ring was enlarged. Further, the electronegative substitute of -Cl had larger resolution increment than methyl or methoxy at the position p- of phenyl ring but much lower increment at position m-. It is possible to well explain the resolution variation phenomenon by considering the group resistance and the variation of hydrogen-bonds formed inside the amino amides and between the solutes and DS. The amido group was shown irreplaceable to have chiral resolution with DS alone as an ionic and chiral pseudostationary phase.     

Novel chiral selectors anchored on polydimethylsiloxane as stationary phases for separation of derivatized amino acid enantiomers by capillary gas chromatography

Six chiral selectors of S-(-)-t-Leu-cyclopropylamide, S-(-)-t-Leu-cyclopentylamide, S-(-)-t-Leu-cyclohexylamide, S-(-)-t-Leu-cycloheptylamide, S-(-)-t-Leu-cyclooctylamide, S-(-)-t-Leu-cyclododecylamide have been prepared and anchored individually through amide bonding to a polydimethylsiloxane functionalized with 2,2,2-trifluoroethyl ester groups by way of nucleophilic displacement reaction. The resulting chiral polysiloxanes have been provided as stationary phases for the separation of amino acid enantiomers by capillary GC. Amino acids were derivatized into N(O)-trifluoroacetyl isopropyl esters. Especially, polydimethylsiloxane anchored with S-(-)-t-Leu-cyclooctylamide was found to be efficient for the separation of aspartic acid (Asp) enantiomers. The method was applied to the estimation of ages from the extent of Asp racemization in human dentines.     

The separation of the enantiomers of diquats by capillary electrophoresis using randomly sulfated cyclodextrins as chiral selectors

Diquats, derivatives of the widely used herbicide diquat, represent a new class of functional organic molecules. A combination of their special electrochemical properties and axial chirality could potentially result in their important applications in supramolecular chemistry, chiral catalysis, and chiral analysis. However, prior to their practical applications, the diquats have to be prepared in enantiomerically pure forms and the enantiomeric purity of their P- and M-isomers has to be checked. Hence, a chiral capillary electrophoresis (CE) method has been developed and applied for separation of P- and M-enantiomers of 11 new diquats. Fast and better than baseline CE separations of enantiomers of all 11 diquats within a short time 5–7 min were achieved using acidic buffer, 22 mM NaOH, 35 mM H₃PO₄, pH 2.5, as a background electrolyte, and 6 mM randomly sulfated α-, β-, and γ-cyclodextrins as chiral selectors. The most successful selector was sulfated γ-cyclodextrin, which baseline separated the enantiomers of all 11 diquats, followed by sulfated β-cyclodextrin and sulfated α-cyclodextrin, which baseline separated enantiomers of 10 and nine diquats, respectively. Using this method, a high enantiopurity degree of the isolated P- and M-enantiomers of three diquats with a defined absolute configuration was confirmed and their migration order was identified.     

Experimental design for enantioselective separation of celiprolol by capillary electrophoresis using sulfated beta-cyclodextrin

A capillary zone electrophoresis method was developed for the enantioseparation of celiprolol enantiomers, using a sulfated beta-cyclodextrin (beta-CD) as a chiral selector. The use of a coated capillary was necessary to achieve stable and reproducible enantioseparations. A central composite design was applied to optimize the method and four parameters were selected for this study: the buffer pH, the buffer concentration, the sulfated beta-CD concentration and the temperature. Resolution between celiprolol enantiomers as well as analysis time and generated current were established as responses. For each response, a model was obtained by a second-degree mathematical expression. From the models, the most favorable conditions were determined by optimizing the resolution between celiprolol enantiomers and by setting the two other responses at threshold values. Response surfaces were also used to assess the robustness of the analytical method around the optimal region. Successful results were obtained with a 52 mM acetate buffer at pH 4.0 in the presence of 3.0 mM sulfated beta-CD at a temperature of 19.5 degrees C. Under these optimized conditions, baseline separation of the celiprolol enantiomers was achieved in less than 10 min. The method showed good validation data in terms of precision, accuracy and linearity, and was found to be suitable in determining celiprolol enantiomers in pharmaceutical preparations and in biological fluids.     

Enantioselective separation of epoxides by capillary electrophoresis employing sulfated beta-cyclodextrin as chiral selector

A capillary electrophoresis method was developed for the enantioseparation of epoxide compounds. Sulfated beta-cyclodextrin was employed as a chiral selector. Phosphate-triethanolamine buffer showed a chiral separation effect when employing charged sulfated beta-cyclodextrin. The effect of pH, triethanolamine concentration and sulfated beta-cyclodextrin concentration on the resolution was studied. Methanol was tested as an organic modifier. Several other epoxides were successfully separated by the proposed method.     

HPLC separation of amino acid enantiomers and small peptides on macrocyclic antibiotic-based chiral stationary phases: a review

The search for new and effective chiral selectors capable of separating a wide variety of enantiomeric compounds is an ongoing process. In the past decade, macrocyclic antibiotics have proved to be an exceptionally useful class of chiral selectors for the separation of enantiomers of biological and pharmacological importance by means of HPLC, TLC and electrophoresis. More chiral analytes have been resolved through the use of glycopeptides than with all the other macrocyclic antibiotics combined (ansamycins, thiostrepton, aminoglycosides, etc.). The glycopeptides avoparcin, teicoplanin, ristocetin A and vancomycin have been extensively used as chiral selectors in the form of chiral bonded phases in HPLC, and HPLC stationary phases based on these glycopeptides have been commercialized. Teicoplanin, vancomycin, their analogs and ristocetin A seem to be the most useful glycopeptide HPLC bonded phases for the enantioseparation of proteins and unusal native and derivatized amino acids. In fact, the macrocyclic glycopeptides are to some extent complementary to one another: where partial enantioresolution is obtained with one glycopeptide, there is a high probability that baseline or better separation can be obtained with another. This review sets out to characterize the physicochemical properties of these antibiotics and their application in the enantioseparations of amino acids. The mechanism of separation, the sequence of elution of the stereoisomers and the relation to the absolute configuration are also discussed.     

Polymeric and polymer-supported pseudostationary phases in micellar electrokinetic chromatography: performance and selectivity

Several types of synthetic ionic polymers have been employed as pseudostationary phases in electrokinetic chromatography. The polymers have been shown to have some significant advantages and different chemical selectivity relative to conventional surfactant micelles. Polymeric phases are effective for the separation and analysis of hydrophobic and chiral compounds, and may be useful for the application of mass spectrometric detection. Additionally, the polymeric phases often demonstrate unique selectivity relative to micellar phases, and can be designed and synthesized to provide desired selectivity. This review covers efforts to develop and characterize the performance, characteristics, and selectivity of synthetic polymeric pseudostationary phases since their introduction in 1992. Some ideas for the future development of polymeric pseudostationary phases and the role they may play in electrokinetic separations are presented.     

The capillary electrophoresis separation of benzodiazepine drug using dextran sulfate and SDS as running buffer

Capillary electrophoresis has been applied the analyses of many clinical drugs due to its rapid, high-resolution separation. In this study, electrokinetic chromatography involving the combination of SDS and dextran sulfate, which are synthetic polymers, was examined in order to obtain high resolution. Use of 2% dextran sulfate (10,000 molecular weight), 20 mm SDS running buffer containing boric acid solution (pH 9.2) and a silica capillary (inner diameter of 75 micro m, effective length of 50 cm, 57 cm overall length) afforded separation of 10 kinds of benzodiazepines. The detection limit was 0.2 micro g/mL; additionally, reproducibilities were de fi ned as the peak height and migration time. The average peak height was 5.92% (2.46-17.61), whereas the average migration time was 0.44% (0.18-0.76; n = 5). This separations system can be applied to the analysis and measurement of other pharmaceuticals as well.     

Binary ionic liquid mixtures as gas chromatography stationary phases for improving the separation selectivity of alcohols and aromatic compounds

Binary mixtures of two ionic liquids (ILs), 1-butyl-3-methylimidazolium chloride (BMIM-Cl) and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide (BMIM-NTf2), have been studied for the first time as gas chromatographic stationary phases. The two ILs differ only in the nature of the associated anion. The solvation parameter model was used to examine the change of solvation interactions with the IL stationary phase composition. The hydrogen bond basicity increased linearly as the stationary phase was enriched with the BMIM-Cl IL. The retention factor of short-chained alcohols increased by as much as 1100% when performing the separation on a column containing an IL mixture of 25% BMIM-NTf2/75% BMIM-Cl compared to that of the neat BMIM-NTf2 IL column. By tuning the composition of the IL-stationary phase, the separation selectivity and resolution factors of alcohols and aromatic compounds were improved. A reversal of elution order was observed for specific classes of analytes with enhancements in the stationary phase hydrogen bond basicity.     

Capillary electrochromatographic separation of amino acid enantiomers with molecularly imprinted polymers as chiral recognition agents

The use of molecularly imprinted polymers polymerized in a capillary for the separation of amino acid enantiomers by electrochromatography is described. The substrate-selective polymers were prepared by using l-phenylalanine anilide as print molecule and methacrylic acid as the functional monomer. The treatment of the inside surface of the capillary, the composition of the polymer and the electrochromatographic running conditions were investigated. This preliminary report demonstrated a novel and simple method for capillary electrochromatographic separations of amino acid enantiomers using molecularly imprinted polymers. Received: 9 April 1996 / Revised: 8 August 1996 / Accepted: 8 August 1996     

Polyamidoamine‐grafted silica nanoparticles as pseudostationary phases for capillary electrochromatographic separation of proteins

Polyamidoamine‐grafted silica nanoparticles were synthesized, characterized and investigated for the feasibility as pseudostationary phases in alkaline buffer for separation of cationic and anionic proteins, viz., lysozyme, cytochrome C, gamma globulin, and myoglobin. Neither bare silica nanoparticles nor polyamidoamines nor their mixtures as pseudostationary phases could lead to simultaneous separation of the four proteins. However, polyamidoamine‐grafted silica nanoparticles not only suppressed the irreversible wall adsorption of the cationic lysozyme and cytochrome C, but also provided selectivity toward all the proteins. We found that polyamidoamine generation two‐modified silica nanoparticles were the optimum pseudostationary phases with respect to detection sensitivity and separation efficiency; presence of the nanoparticles at 0.01% in the running buffer of 12.5 mM tetraborate/phosphate at pH 9.1 resulted in baseline resolution of the four proteins.     

Discontinuous electrokinetic chromatography of parabens using different substituted resonances as pseudostationary phases

Resorcarene derivatives, negatively charged even at moderate pH, were synthesized and employed as pseudostationary phases to achieve mobilities exceeding that of the electroosmotic flow. Under these conditions, a discontinuous electrolyte system was developed which allows the separation of four uncharged homologous 4-hydroxybenzoic esters (parabens) within a zone of resorcarene electrolyte, and the detection of these UV active compounds in a resorcarene-free zone, free from the high UV background absorbance of the resorcarenes. Resorcarenes, with differently charged functionalities (carboxylate and phosphate groups) to provide the electrophoretic mobility and with alkyl residues of different chain lengths responsible for the chromatographic interactions with the analytes, were tested and compared in terms of mobility and selectivity. Only the resorcarene phosphates exhibited sufficient mobilities at low pH exceeding the mobility of the electroosmotic flow (EOF). Retention factors of the parabens were found to increase with increasing chain length of the alkyl residues attached to the resorcarene. However, maximum selectivity was observed for an intermediate chain length (C8). An equation for the calculation of retention factors in discontinuous electrokinetic chromatography (EKC) is presented.     

Influence of the amino acid sequence and nature of the cyclodextrin on the separation of small peptide enantiomers by capillary electrophoresis using randomly substituted and single isomer sulfated and sulfonated cyclodextrins

The separation of dipeptide and tripeptide enantiomers using negatively charged single isomers as well as randomly sulfated and sulfonated cyclodextrins (CDs) was investigated with respect to the amino acid sequence of the peptides and the nature of the CDs. Standardized conditions concerning buffer pH and molarity, CD concentration, and separation voltage were applied. Compared to suffobutylether-beta-CD and heptakis-(2,3-dimethyl-6-sulfato)-beta-CD, randomly sulfated beta-CD as well as the single isomer derivatives heptakis-6-sulfato-beta-CD and heptakis-(2,3-diacetyl-6-sulfato)-beta-CD were the more universal CDs for enantioseparations. The enantiomer migration order depended to a greater extent on the CD than on the amino acid sequence of the peptide although small structural differences such as formation of a peptide amide or ester affected the chiral recognition by the randomly substituted CD derivatives. Using sulfobutylether-beta-CD or heptakis-(2,3-diacetyl-6-sulfato)-beta-CD the DD enantiomers migrated before the LL enantiomers for most peptides while the opposite migration order, i.e. LL before DD, was observed when heptakis-6-sulfato-beta-CD was applied as chiral selector.     

Assay of aromatic amino acid enantiomers in rice-brewed suspensions by chiral ligand-exchange CE

The aim of this work was to assay seasoning D- or L-aromatic amino acids (AAs) in rice-brewed suspensions, Laozao in Chinese, by chiral ligand-exchange CE with UV detection and Zn(II) complex as a chiral selecting system. Resolution and peak retention were found to be parallel to the basicity of the AA chiral ligands, and basic L-Arg was known to work the best at pH 8.20 compared with L-Lys and other AA ligands. Baseline separation of DL-aromatic AAs and partially separation of some FMOC-labeled nonaromatic AAs have been achieved using a running buffer of 5 mM ammonium acetate, 100 mM boric acid, 3 mM ZnSO(4), and 6 mM L-Arg at pH 8.20. The aromatic amino acids in four brands of Laozao were measured in a range of 0.25-20 microg/mL for Typ, 1.00-120 microg/mL for Phe, and 2.50-200 microg/mL for Tyr, with linear regression coefficient all over 0.999. The LOD (S/N=3) was 0.15 microg/mL for Typ, 0.50 microg/mL for Phe, and 1.25 microg/mL for Tyr. The recovery of the method determined by spiking with the supernates of Laozao as background was 94.0-112.9%. The RSDs of migration time and peak area measured from six injections of tyrosine were 0.2 and 2.7%, respectively, for run-to-run, and 1.6 and 3.2%, respectively for day-to-day. Interestingly, there were only L-Trp, D-Tyr, and L-Tyr found in the assayed four brands of Laozao. They may serve as an index to recognize the brand of Laozao.