Pyramidalized olefins: a DFT study of bicyclo[2.1.1]-, -[3.2.1]-, and -[3.2.2]alkenes and their fused derivatives. Two rare examples of pi-facially symmetric pyramidal olefins

Density functional theory (B3LYP/6-31G) was used to study a large series of bridged polycyclic alkenes based on the bicyclo[2.1.1], -[3.2.1], and -[3.2.2] nuclei. In those compounds with pi-facial dissymmetry, butterfly bending of the strained olefinic bonds was generally predicted. Surprisingly, large pyramidalizations are calculated for the highly strained but pi-facially symmetric tetracyclo[5.1.1.1.(3,5)0(2,6)]dec-2-ene (28, psi = 19.8 degrees ) and tetracyclo[5.2.2.1.(3,5)0(2,6)]dodec-2,8,10-triene (33, psi = 14.4 degrees ). The preference for propano-directed bending in the bicyclo[3.2.1]octenes is about as strong as that for endo bending in norbornenes.     

Manifestations of the Alder-Rickert reaction in the structures of bicyclo[2.2.2]octadiene and bicyclo[2.2.2]octene derivatives

The Alder-Rickert ethylene extrusion reaction manifests in the ground state structures of compounds 9-12 which contain the bicyclo[2.2.2]octadiene moiety and compounds 13, 14, and 17-20 which contain the bicyclo[2.2.2]octene moiety. A significant decrease of the 13C-13C one-bond coupling constants for the C-C bonds, which break in this fragmentation reaction, suggests lengthening, and hence weakening of these bonds. In the unsymmetrical systems these effects are also shown to be associated with strengthening of the CH2-CH2 bond, which is ultimately lost from the molecule as ethylene. Low-temperature crystal structures of compounds 9-12 and 16 provide evidence for similar crystal packing requirements of the CH2-CH2 and CH=CH moieties.     

Synthesis and characterization of tetramethylene-syn-sesterbicyclo[2.2.2]octene

The synthesis of syn-sesterbicyclo[2.2.2]octene (7) bilaterally grafted by an exocyclic s-cis-butadiene moiety is achieved from 1,8,9,10-tetrachloro-11,11-dimethoxy-endo-tricyclo[6.2.1.0^2,7]undeca-3,5,9-triene (8) employing repetitive Diels-Alder cycloadditions between 1,3-cyclohexadiene, generated from p-benzoquinone, and diethyl fumarate or maleic anhydride as the exocyclic butadienyl equivalent, followed by subsequent transformation to the conjugated diene moieties. In comparison with the corresponding sesquibicyclo[2.2.2]octene 6, the ¹H NMR demonstrates the anisotropic shielding effect operating within the three parallel laticyclic double bonds. However, the UV absorption of 7 shows less effect by the increase of laticyclic conjugated ethylene units.     

Synthesis of a pericosine analogue with a bicyclo[2.2.2]octene skeleton

A new analogue of the antitumor pericosines possessing a bicyclo[2.2.2]octene skeleton has been synthesized from methyl gallate using oxidative dearomatization and regio- and diastereoselective Diels-Alder reaction as the key steps.     

Chemistry of the 2,3-oxaphosphabicyclo[2.2.2]octene ring system: Extrusion of metaphosphates

The 2,3-oxaphosphabicyclo[2.2.2]octene 3-oxide (or sulfide) ring system is of considerable value because it easily fragments on being heated or irradiated (254 nm) to provide three-coordinate phosphoryl species. The system is synthesized by O-insertion with peracids into a C P bond of 7-phosphanorbornene derivatives with a variety of P-substituents. With rare exception, the insertion has been found to proceed with retention of the configuration at phosphorus, as established by X-ray and NMR techniques. The thermal fragmentation that produces the metaphosphate derivatives EtO PO₂, EtO P(S)O, and Et₂N PO₂ follows first-order kinetics, and is independent of the concentration of a trapping agent for these species. Solvent effects and activation parameters join in defining a retrocycloaddition mechanism that ejects the free metaphosphate. The species Ph PO₂ can also be easily generated either thermally or photochemically. Metaphosphates have been found to attack ethereal oxygen in epoxides and oxetanes, and may undergo anchimeric participation with a properly placed methoxy group on the substituent used in the 2,3-oxaphosphabicyclo[2.2.2]octene precursor.     

Domino ring-opening metathesis-ring-closing metathesis of bicyclo[2.2.2]octene derivatives: scope and limitations

Domino metathesis involving ring-opening metathesis-ring-closing metathesis (ROM-RCM) of a bicyclo[2.2.2]octene derivative having an appropriate alkene chain, expected to produce a 7/6 fused bicyclic system, provided a decalin system in contrast to ROM-RCM of the corresponding bicyclo[2.2.1]heptene analogues, which as expected produced the 7/5 fused bicycles. The expected 6/7 bicyclic system could, however, be made through RCM of the elusive ROM product prepared from the same bicyclo[2.2.2]octene analogue by a nonmetathetic route. A rationale to explain the difference in reactivity pattern between these two systems toward ROM-RCM has been forwarded.     

Synthesis and properties of novel oligothiophenes surrounded by bicyclo[2.2.2]octene frameworks

Novel oligothiophenes surrounded by bicyclo[2.2.2]octene (abbreviated as BCO) frameworks ranging from dimer to hexamer, 1(nT) (n = 2, 3, 4, 6), were prepared, and their structures and electronic properties were investigated. Dimer 1(2T) was synthesized by oxidative coupling of the 2-lithiated monomer generated from 4,5-BCO-annelated 2-bromothiophene 8 with CuCl2 in 76% yield. Trimer 1(3T) and tetramer 1(4T) were synthesized by Stille coupling of 2,5-dibromo-3,4-BCO-annelated thiophene 4 and of the 5,5'-dibromo derivative of bis(3,4-BCO-thiophen-2-yl) 10 with 2-stannylated 4,5-BCO-annelated thiophene 9 in 41% and 46% yield, respectively. Hexamer 1(6T) was synthesized by oxidative coupling of terthiophene 12, tris-annelated with BCO units, in 81% yield. X-ray crystallographic studies showed that the thiophene rings in 1(2T) and 1(3T) are rotated around the inter-ring C-C bond(s) with the C=C-C=C dihedral angles of -174.3(5) degrees for 1(2T) and -149.7(3) degrees and 34.4(3) degrees for 1(3T). In the crystal structures of 1(2T) and 1(3T), no pi-stacking was observed as expected from the steric effect of the BCO units. Theoretical calculations for 1(2T) and 1(3T) at the B3LYP/6-31G(d) level indicated that the annelation with BCO units either at the 2,3- or 3,4-positions of thiophene rings raises both the KS HOMO and LUMO levels. In the electronic absorption spectra of 1, the longest wavelength absorption band corresponding to the pi-pi transition is bathochromically shifted with the increase in absorption intensity as the number of thiophene rings increases, and the absorption of the polythiophene 1 with infinite length was predicted to be 419 nm. The cyclic voltammetry of 1 in CH2Cl2 at -78 degrees C (2T) or at room temperature (3T, 4T, 6T) showed two reversible oxidation waves, indicating that the radical cation and dication of 1 are stable under these conditions.     

Kinetic isotope effects on metaphosphate generation from fragmentation of 2,3-oxaphosphabicyclo[2.2.2]octene derivatives

Kinetic isotope effects of deuterium and oxygen-18 were measured on fragmentation of syn-3-ethoxy ( 1a ) and syn-3-(N,N-diethylamino) ( 1b ) 2,3-oxaphosphabicyclo[2.2.2]octene derivatives in 1,2-dichloroethane at 100°C. The secondary deuterium isotope effect on hydrogen adjacent to the P(SINGLE BOND)C bond was found to be 1.060 ± 0.008 for 1a and 1.081 ± 0.009 for 1b . The kinetic oxygen isotope effect on the bridge P(SINGLE BOND)O(SINGLE BOND)C is 0.9901 ± 0.0016 for 1a . The data indicate an unsymmetrical transition state for retrocycloaddition extrusion of the metaphosphate moiety, with the breakage of the C(SINGLE BOND)P bond and formation of the P (DOUBLE BOND) O bond more advanced than the C(SINGLE BOND)O breakage. A synthesis of 1a and 1b labeled with deuterium is described. © 1996 John Wiley & Sons, Inc.     

Aryl-2,3-oxaphosphabicyclo[2.2.2]octene derivatives—the precursors of oxoarylphosphine oxides (aryl metaphosphonates)

The Baeyer-Villiger oxidation of 7-phosphanorbornene 7-oxides with sterically demanding substituents on the phosphorus atom (4a-d) by m-chloroperbenzoic acid afforded the title products (5a-d) as a mixture of two regioisomers (A and B). Isomer A, the result of thermodynamic control, was stable, while isomer B, the product of kinetic control, underwent decomposition and/or epoxidation. Single crystal X-ray analysis of P-(2,4,6-triisopropylphenyl) oxaphosphabicyclooctene (5Ac) was not only useful in the evaluation of its structure, but, for the first time in the literature, a low-coordinated arylmetaphosphonate (15c) formed by fragmentation on X-ray irradiation could also be detected. The precursors (5Aa-c) were utilized in the thermoinduced and UV light-mediated fragmentation-related phosphorylations of alcohols. Beside the well-known elimination-addition mechanism via the metaphosphonate intermediate (15), a novel addition-elimination route involving a species with a pentavalent pentacoordinated phosphorus atom (16) was also substantiated.     

Radical cation of dibenzothiophene fully annelated with bicyclo[2.2.2]octene units: X-ray crystal structure and electronic properties

New dibenzothiophene 2 fully annelated with bicyclo[2.2.2]octene units was synthesized and oxidized to stable radical cation salt 2(*+)SbCl(6)(-), whose structure was determined by X-ray crystallography. Although the intrinsic electronic structure of 2(*+) is predicted to be close to structure A, an interaction with the counteranion makes structure B contribute significantly. A part of the salt 2(*+)SbCl(6)(-) underwent rearrangement to arenium ion 6(+), whose structure was also clarified by X-ray crystallography.     

Formation of a novel arenium ion from the radical cation of a twisted triphenylene fully annelated with bicyclo[2.2.2]octene units

[reaction: see text]. Triphenylene 1 was synthesized by palladium-catalyzed cyclotrimerization of a benzyne annelated with two bicyclo[2.2.2]octene (BCO) units. Theoretical calculations indicated that 1 is constrained to a twisted conformation with a C2 symmetry as a result of steric repulsion between the BCO units. The one-electron oxidation of 1 with SbCl5 gave the corresponding radical cation 1*+, which abstracted a chlorine atom in the medium with the concomitant rearrangement to form novel arenium ion 2+.     

Diazabicycloalkanes with nitrogen atoms in bridgehead positions 20. Synthesis of naphtho[2,3-b]-1,4-diazabicyclo[2.2.2]octene

Reaction of 2-acetamido-3-bis(2-hydroxyethyl)aminonaphthalene with phosphorus oxychloride leads to the formation of 2-methyl-1-(2-chloroethyl)naphtho[2,3-d]imidazole, while reaction with hydrobromic acid gives naphtho[23-b]-1,4-diozabicyclo[2.2.2]octane in 13% yield. The yield of the latter can be increased to 45% by exchange of the hydroxyl groups in the starting material by chlorine and by deacetylation.For Communication 19, see [1].Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 97–100, January, 1991.     

Mass spectra of the hydrogenated products of condensation of 1,3-cyclohexadiene and bicyclo[2.2.2]octene and their aromatic analogs

The structures of completely hydrogenated and aromatized products of the reaction of bicyclo[2.2.2]octene and 1,3-cyclohexadiene were investigated by mass spectrometry. It is shown that the reaction proceeds via mechanisms of the linear polymerization type and the Diels-Alder polymerization type; hydrocarbons, the molecules of which include bridged, condensed, interlinked, and mixed types of ring fusion, are formed.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1549–1553, July, 1990.     

Terthiophene radical cations end-capped by bicyclo[2.2.2]octene units: formation of bent pi-dimers mutually attracted at the central position

A terthiophene fused with bicyclo[2.2.2]octene units only at both ends was newly synthesized. Since there is no steric hindrance at the central position, this terthiophene has a possibility to interact only at the central position. One-electron oxidation of this terthiophene afforded a highly stable radical-cation salt as deep blue crystals. The result of X-ray crystal structural analysis demonstrated a characteristically bent pi-dimereric structure, which is formed by mutual attraction of single radical-cation species at the central position to minimize the steric repulsion. Remarkably short intermolecular distances between the central thiophene rings of each unit of the dimeric pair, that is, 2.976(10) A for Cbeta-Cbeta, 3.091(10) A for Calpha-Calpha, and 3.779(3) A for S-S, are good indication of the existence of attracting interaction, which was confirmed by theoretical calculations. This interaction was experimentally demonstrated by the reversible formation of the pi-dimer in CH2Cl2 solution using ESR and UV-vis-NIR spectroscopy. The crystal of the pi-dimer is in its singlet state and ESR silent in the solid state at 300 K, but the signal of a triplet state of the pi-dimer was observed by heating the solid at 400 K. This indicates that this pi-dimer has a quite small triplet-singlet enegy gap and the triplet state is thermally accessible.     

Synthesis and fragmentation of new 2‐phosphabicyclo[2.2.2]octene 2‐oxides

The substitution pattern of the 2‐phosphabicyclo[2.2.2]octene framework and the skeleton itself were varied to obtain new cycloadducts usable in phosphorylations and to study their ability to undergo fragmentation. Thus, an N‐methyl and several P‐trialkylphenyl derivatives ( 7 and 9 , respectively) were synthesized, together with two diaza species ( 8 ) whose stereostructure was evaluated by single crystal X‐ray analysis. Mechanistic studies on the UV light‐mediated photolysis of the P‐aryl phosphabicyclooctenes ( 9 ) in the presence of methanol supports the suggestion of a novel addition–elimination reaction path. © 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:626–632, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10052     

Diazabicycloalkanes with nitrogen atoms in bridgehead positions. 16. Synthesis and properties of benzo[b]-1,4-diazabicyclo[2.2.2]octene and dibenzo[b,e]-1,4-diazabicyclo[2.2.2]octadiene,containing primary aromatic amino acids

4-Aminobenzo[1,2-b]-1,4-diazabicyclo[2.2.2]octene and 4-aminodibenzo[1,2-b, e]-1,4-diazabicyclo[2.2.2]octadiene have been prepared by cyclization reactions of N--chloroethyl derivatives of 1,2,4-triaminobenzene and aminophenazine, and subsequent catalytic hydrogenation of the corresponding 4-nitrobenzo[1,2-b]-1,4-diazabicyclo[2.2.2]octene and 4-benzylaminodibenzo[1,2-b,e]-1,4-diazabicyclo[2.2.2]-octadiene. Using the conversion of these compounds to azides as an example, we have demonstrated the feasibility of applying these primary aromatic amines for the synthesis of derivatives of these heterocycles.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 831–837, June, 1988.     

Face Selectivity of the Diels-Alder Reaction of Hexadienone Moieties Grafted onto the Bicyclo[2.2.2]octene Skeleton and Perturbed by a Remote Tricarbonylbutadieneiron Group

Selective oxidations of bis(tricarbonyliron) complexes of methyl (3,7,8-trimethylidenebicyclo[2.2.2]oct-5-en-2-ylidene)methyl ketones 15 – 17 afforded selectively the tricarbonyl {(1RS,4SR,7SR,8RS)-C,7,8,C-η-[methyl (3,7,8-trimethylidenebicyclo[2.2.2]oct-5-en-(2Z)-2-ylidene)methyl ketone]}iron ( 12 ), the corresponding (2E)-derivative 13 and the tricarbonyl{(1RS,2RS,3SR,4SR)-C,2,3,C-η-[methyl (3,7,8-trimethylidenebicyclo[2.2.2]oct-5-en-(2Z)-2-ylidene)methyl ketone]}iron ( 18 ). The stereoselectivity of the Diels-Alder reactions of the uncomplexed (Z)- and (E)-hexadienone 12 and 13 , respectively, was established. The face of the diene syn with respect to the C(5), C(6) etheno bridge was preferred for the cycloadditions of N-phenyltriazolinedione (NPTAD). In contrast, the reactions of dimethyl acetylenedicarboxylate (DMAD) and methyl propynoate showed a slight preference for addtion to the face of the hexadienones anti with respect to the etheno bridges of 12 and 13 . The crystal structure of the adduct 25 resulting from the cycloaddition of NPTAD to 12 is reported.