Simulated annealing study of diblock copolymer thin films confined between two homogeneous surfaces.

Thin films of symmetric diblock copolymers confined between two parallel surfaces have been systematically investigated by means of simulated annealing on a simple cubic lattice. The study was carried out for systems with different film thicknesses and surface-polymer interactions. Very regular equilibrium morphologies of lamella are formed in almost all cases. The dependence of lamellar orientations, total energy, chain-conformation entropy, and free energy of the confined films on the film thickness and the strength of surface-polymer interactions has been studied systematically. The influence of packing frustration on morphology is observed and the mechanisms of lamellar orientations are investigated.     

Preparation and photochromism of Keggin-type molybdphosphoric acid/silica mesoporous composite thin films

Using tetraethoxysilane and 3-aminopropyltriethoxysilane as the silica sources, amino-functionalized organic/inorganic hybrid mesoporous silica thin films with 2-dimensional hexagonal structure have been synthesized by evaporation induced self-assembly process in the presence of cetyltrimethyl ammonium bromide templates under acid conditions. The Keggin-type molybdphosphoric acid (PMo) is incorporated into the mesoporous silica thin films with amino-groups by wetness impregnation, and the PMo/silica mesoporous composite thin films are obtained. The results of X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), and Fourier transform infrared (FTIR) spectra indicate the PMo molecules maintain Keggin structure and are homogeneously distributed inside mesopores. The composite thin films possess excellent reversible photochromic properties, and change from colorless to blue under ultraviolet irradiation. The photochromic mechanism of the composite thin films is studied by ultraviolet-visible (UV-vis), electron spin resonance (ESR) and X-ray photoelectron spectroscopy (XPS) spectra. It is shown that intervalence charge transfer (IVCT) and ligand-to-metal charge transfer (LMCT) are the main reasons of photochromism. PMo anions interact strongly with amino-groups of the mesoporous suface via hydrogen bond and electrostatic force. After ultraviolet irradiation, the charge transfer occurs by reduction of heteropolyanions accompanying the formation of heteropolyblues with multivalence Mo(VI, V), and the bleaching process of composite thin films is closely related to the presence of oxygen.     

Preparation and characterization of covalently bonded PVA/Laponite/HAPI nanocomposite multilayer freestanding films by layer‐by‐layer assembly

The layer‐by‐layer (LBL) assembly technique is an attractive method to make functional multilayer thin films and has been applied to fabricate a wide range of materials. LBL materials could improve optical transmittance and mechanical properties if the film components were covalently bonded. Covalently bonded nanocomposite multilayer films were prepared by employing hydrophilic aliphatic polyisocyanate (HAPI) as the reactive component, to react with Laponite and polyvinyl alcohol (PVA). FT‐IR spectra suggested that HAPI reacted with Laponite and PVA at ambient temperature rapidly. Ellipsometry measurement showed that the film thickness was in linear growth. The influences of HAPI on the optical, mechanical and thermal properties of the films were investigated by UV‐Vis spectroscopy, tensile stress measurement, DSC and TGA. The obtained results showed that the optical transmittance and mechanical strength were enhanced when the film components were covalently bonded by HAPI. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 545–551     

Self‐assembly of metallo‐supramolecular block copolymers in thin films

The self‐assembly of a metallo‐supramolecular PS‐[Ru]‐PEO block copolymer, where ‐[Ru]‐ is a bis‐2,2′:6′,2″‐terpyridine‐ruthenium(II) complex, in thin films was investigated. Metallo‐supramolecular copolymers exhibit a different behavior as compared to their covalent counterparts. The presence of the charged complex at the junction of the two blocks has a strong impact on the self‐assembly, effecting the orientation of the cylinders and ordering process. Poly(ethylene oxide) cylinders oriented normal to the film surface are obtained directly regardless of the experimental conditions over a wide range of thicknesses. Exposure to polar solvent vapors can be used to improve the lateral ordering of the cylindrical microdomains. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4719–4724, 2008     

纳米二氧化钛粉体及薄膜制备的研究进展

本文对近几年有关纳米二氧化钛粉体及薄膜的制备研究进行综述。重点介绍及评述了以无机钛盐和有机钛盐为前驱体制备纳米二氧化钛粉体及利用自组装方法制备二氧钛薄膜的最新研究成果。对今后研究工作的趋势进行了探讨。     

Nanoparticulate Hollow TiO2 Fibers as Light Scatterers in Dye‐Sensitized Solar Cells: Layer‐by‐Layer Self‐Assembly Parameters and Mechanism

Hollow structures show both light scattering and light trapping, which makes them promising for dye‐sensitized solar cell (DSSC) applications. In this work, nanoparticulate hollow TiO₂ fibers are prepared by layer‐by‐layer (LbL) self‐assembly deposition of TiO₂ nanoparticles on natural cellulose fibers as template, followed by thermal removal of the template. The effect of LbL parameters such as the type and molecular weight of polyelectrolyte, number of dip cycles, and the TiO₂ dispersion (amorphous or crystalline sol) are investigated. LbL deposition with weak polyelectrolytes (polyethylenimine, PEI) gives greater nanoparticle deposition yield compared to strong polyelectrolytes (poly(diallyldimethylammonium chloride), PDDA). Decreasing the molecular weight of the polyelectrolyte results in more deposition of nanoparticles in each dip cycle with narrower pore size distribution. Fibers prepared by the deposition of crystalline TiO₂ nanoparticles show higher surface area and higher pore volume than amorphous nanoparticles. Scattering coefficients and backscattering properties of fibers are investigated and compared with those of commercial P25 nanoparticles. Composite P25–fiber films are electrophoretically deposited and employed as the photoanode in DSSC. Photoelectrochemical measurements showed an increase of around 50 % in conversion efficiency. By employing the intensity‐modulated photovoltage and photocurrent spectroscopy methods, it is shown that the performance improvement due to addition of fibers is mostly due to the increase in light‐harvesting efficiency. The high surface area due to the nanoparticulate structure and strong light harvesting due to the hollow structure make these fibers promising scatterers in DSSCs.     

Self-assembly of linear and cyclic siloxane-containing mesogens: investigation of layered structures in bulk and thin films

Silicon-containing materials which possess the ability to form mesophases are promising systems for applications in the fields of electro-optical devices, nonlinear optics, and information storage media. In this work, the formation of supramolecular assemblies of a series of low molecular weight siloxane-containing mesogens is presented. Besides a novel synthesis route via Ru(II) -catalyzed hydrosilylation of phenyl acetylene derivatives, mesophase characterization by modern analysis techniques is performed. As linker groups, leading to bi- and tetramesogens, linear disiloxane and cyclic tetrasiloxane are utilized. In the resulting class of materials, high thermal stability, induced by the formation of layered smectic-type structures, is predominant. The smectic-type phases were found to be monotropic. Layer distances in the assemblies, as well as the phase transition temperatures, can be controlled by the substitution motif on the mesogens (number and length of alkyl chains). In spin-cast thin films, the layered domains are visualized by atomic force microscopy; furthermore, domain dimensions and electron densities are determined by grazing-incidence small-angle X-ray scattering.     

Fullerene nanowires: self-assembled structures of a low-molecular-weight organogelator fabricated by the Langmuir-Blodgett method

Fullerene derivative C60TT, which is substituted with the low-molecular-weight organogelator tris(dodecyloxy)benzamide, formed nanowire structures on application of the Langmuir-Blodgett (LB) method. The surface morphology of the C60TT LB film was dependent on the holding time before deposition at a surface pressure of 5 mN m(-1); it changed from a homogeneous monolayer to a bilayer fibrous structure via a fibrous monolayer structure, which was estimated to have dimensions of 1.2 nm in height, 8 nm in width, and 5-10 microm in length. From the structural and spectroscopic data, it is inferred that close packing of the fullerene moiety occurs along with intermolecular hydrogen bonding within the monolayer fibrous structure. The morphological changes in the LB film are explained kinetically by the Avrami theory, based on the decrease in the surface area of the monolayer at the air/water interface. The growth of the quasi-one-dimensional fibrous monolayer structures at holding times from 0 to 0.2 h is considered to be an interface-controlled process, whereas the growth of the quasi-one-dimensional bilayer fibrous structures from 0.2 to 18 h is thought to be a diffusion-controlled process.     

Geometric Model Describing the Banded Morphology of Particle Films Formed by Convective Assembly

Nanoparticle films coated on smooth substrates by convective assembly from dilute suspensions in dip‐coating configuration are known to have discrete film morphologies. Specifically, the film morphology is characterized by alternating bands of densely packed particles and bands of bare substrate. Convective assembly is a frontal film‐growth process that occurs at the three‐phase contact line formed by the substrate, the suspension in which it is submersed, and the surrounding air. The bands are parallel to this contact line and can be either monolayered or multilayered. Monolayered bands result whenever the substrate is withdrawn from the suspension at a rate too high for particles to assemble into a continuous film. We report a new insight to the mechanism behind this banding phenomenon, namely, that inter‐band spacing is strongly influenced by the constituent particle size. We therefore propose a geometric model relating the inter‐band spacing to the particle size. By making banded films with systematically varied particle sizes (silica/zeolite, 20 to 500 nm), we are able to quantitatively validate our model. Furthermore, the model correctly predicts that multilayered banded films have higher inter‐band spacings than monolayered banded films comprising the same particles.     

Hierarchically Structured Porous Films of Silica Hollow Spheres via Layer‐by‐Layer Assembly and Their Superhydrophilic and Antifogging Properties

Raspberrylike organic/inorganic composite spheres are prepared by stepwise electrostatic assembly of polyelectrolytes and silica nanoparticles onto monodisperse polystyrene spheres. Hierarchically structured porous films of silica hollow spheres are fabricated from these composite spheres by layer‐by‐layer assembly with polyelectrolytes followed by calcination. The morphologies of the raspberrylike organic/inorganic composite spheres and the derived hierarchically structured porous films are observed by scanning and transmission electron microscopy. The surface properties of these films are investigated by measuring their water contact angles, water‐spreading speed, and antifogging properties. The results show that such hierarchically structured porous films of silica hollow spheres have unique superhydrophilic and antifogging properties. Finally, the formation mechanism of these nanostructures and property–structure relationships are discussed in detail on the basis of experimental observations.     

Progressive transition from resonant to diffuse reflection in anisotropic colloidal films

The synthesis and characterization of highly ordered three‐dimensional photonic crystals have been the subjects of intense study over the past two decades due to the unique ability of these structures to control light at the nanoscale. Building on that work in recent years, increasing interest is now focused on the unique optical properties of disordered and quasi‐ordered photonic structures. We present a study of the effects of shape anisotropy and disorder on the specular reflection properties of polymer‐based colloidal films comprised of rod‐shaped subunits of varying aspect ratio. We characterize the specular reflectance properties of these films as a function of their increasing levels of disorder, demonstrating progressive transition from resonant reflection to diffuse reflection. The onset of the diffuse reflection is governed by particle size. © 2014 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys. 2014 , 52, 611–617     

Fabrication of ultrathin films with large third-order nonlinear optical properties.

An ultrathin composite film containing anionic Ag-His complexes (His: L-Histidine) and oppositely charged BH-PPV was fabricated by means of the electrostatic layer-by-layer self-assembly technique. UV/Vis spectra showed a continuous deposition process of Ag-His complexes and BH-PPV. The film structure was characterized by using small-angle X-ray diffraction, AFM, and SEM. The nonlinear optical properties of the ultrathin film were studied by using the Z-scan technique with a laser duration of 8 ns at a wavelength of 532 nm. The film sample exhibited a strong nonlinear saturated absorption, with an alpha2 value of -3.9 x 10(-5) mW(-1) and a self-defocusing effect with an n2 value of -4.78 x 10 (-12) m2W(-1).     

Sequential Assembly of Phototunable Ferromagnetic Ultrathin Films with Perpendicular Magnetic Anisotropy

Getting organized : Assemblies of ferromagnetic FePt nanoparticles were generated with large perpendicular magnetic anisotropy by a magnetic‐field‐assisted layer‐by‐layer method, and subsequently layer‐by‐layer films consisting of L1₀‐FePt nanoparticles and organic polymers were prepared. These films are phototunable when photochromic molecules are used as polymer layers.

     

Specific recognition of syndiotactic poly(methacrylic acid) in porous isotactic poly(methyl methacrylate) thin films based on the effects of stereoregularity,temperature, and solvent

The effects of stereoregularity, temperature, and solvent on the specific recognition of syndiotactic (st)‐poly(methacrylic acid) (PMAA) in macromolecularly porous isotactic (it)‐poly(methyl methacrylate) films were investigated to give important insights into the regularity and stability of nanospaces in the it‐PMMA films as well as template polymerization. The porous it‐PMMA films were fabricated on quartz crystal microbalance (QCM) substrates via the layer‐by‐layer (LbL) assembly of it‐PMMA/st‐PMAA, plus the st‐PMAA extraction from the assembly. QCM analysis and infrared spectroscopy revealed the first case of stereocomplex formation using st‐PMAA with lower stereoregularity (rr = 73%) in the LbL films, while st‐PMAA obtained with conventional free radical polymerization (rr = 62%) was barely incorporated into the porous it‐PMMA films. The maximum st‐PMAA incorporation increased from 25 to 40 °C, but there were almost no difference between 40 and 55 °C, indicating that the it‐PMMA crystallization would also be accelerated with increasing temperature. The studies on st‐PMAA incorporation with various complexing solvents revealed that the host it‐PMMA in the porous films could only form the original stereocomplex with 2/1 unit‐molar stoichiometry (st‐PMAA/it‐PMMA) in acetonitrile/water or ethanol/water. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3651–3657, 2010     

Organic–Organic Heterostructures: Concepts and Applications

We review basic concepts as well as recent examples and applications of organic–organic heterostructures. We organize the different types of heterostructures according to material A deposited on material B (A/B), A co‐deposited with B (A:B), heterostructures in the monolayer regime including nanostructuring concepts and systems involving self‐assembled monolayers, as well as various other architectures, including superlattices. While most examples are related to small‐molecule organic semiconductors, many of the ideas can be applied to other systems. The central theme is growth and structure as well as optical and electronic properties. Finally, we comment on implications for device applications.