Facile synthesis of Fe3O4 nanoparticles by reduction phase transformation from γ-Fe2O3 nanoparticles in organic solvent

A phase transformation induced by the reduction of as-synthesized γ-maghemite (γ-Fe₂O₃) nanoparticles was performed in solution by exploiting the reservoir of reduction gas (CO) generated from the incomplete combustion reaction of organic substances in the reactor. Results from X-ray diffraction, color indicator, and magnetic analysis using a SQUID strongly support this phase transformation. Based on this route, monodisperse magnetite (Fe₃O₄) nanoparticles were simply produced in the range from 260 to 300 °C. Almost all aspects of the original γ-Fe₂O₃ nanoparticles, such as shape, size, and monodispersity, were maintained in the produced Fe₃O₄ nanoparticles.     

Adsorption of proteins on γ-Fe2O3 and γ-Fe2O3/SiO2 magnetic materials

Russian Journal of Physical Chemistry A - γ-Fe2O3–SiO2 composites are synthesized via the coprecipitation of a γ-Fe2O3 magnetic carrier (with specific surface S = 17 m2/g and pore...     

Role of surface spins on magnetization of Cr2O3 coated γ-Fe2O3 nanoparticles

Effect of surface spins in chromium oxide (Cr₂O₃) coated maghemite (γ-Fe₂O₃) nanoparticles (13 nm) as prepared by microwave plasma technique have been studied in detail. The temperature dependent zero field cooled/field cooled (ZFC/FC) measurements revealed the blocking temperature at T_B = 75 K. Simulated ZFC/FC curves exhibited large value of effective anisotropy of Cr₂O₃ coated γ-Fe₂O₃ nanoparticles as compared to bulk γ-Fe₂O₃ but less than bare γ-Fe₂O₃ nanoparticles. Bloch's law was fitted on M_S-T data and revealed the values of Bloch's constant B = 3.523 × 10⁻⁴ K^−b and Bloch's exponent b = 1.10. The higher value of B than in bulk is due to weaker exchange coupling J (B ̴ 1/J) on the surface of nanoparticle due to disorder surface spins, while lower value of b is due to no spin wave excitation in presence of large energy band gap at nanoscale. Kneller's law fit on H_C-T data deviated in all temperature range which is due to strong surface anisotropy, core-shell interactions and superparamagnetism. Interparticle interactions and spin glass behavior were investigated by using different physical laws for f-dependent ac susceptibility and they confirmed the presence of spin glass behavior which is due to disordered frozen surface spins and random interparticle interactions.     

Metallodendritic grafted core-shell γ-Fe2O3 nanoparticles used as recoverable catalysts in Suzuki C-C coupling reactions

The use of dendritic structures for the grafting of core-shell γ-Fe(2)O(3)/polymer 300 nm superparamagnetic nanoparticles (MNPs) has been performed with four metallodendrons that were functionalized with diphosphinopalladium complexes. The catalytic performance of these nanocatalysts was optimized for the Suzuki C-C cross-coupling reaction. These results demonstrated the importance of optimizing the catalytic efficiency of grafted MNPs by optimizing the dendritic structures and the nature of the peripheral phosphine ligands. All of these nanocatalysts showed remarkable reactivity towards bromoarenes and they were recovered and efficiently reused by magnetic separation with almost no loss of reactivity, even after 25 cycles.     

Per atom muon capture ratios and effects of molecular structure on muon capture by γ-Fe2O3 and Fe3O4

Journal of Radioanalytical and Nuclear Chemistry - An elemental analysis method utilizing muons has been demonstrated to be effective for non-destructive and quantitative analysis of precious bulk...     

Synthesis,characterization and magnetic properties of γ-Fe2O3 nanoparticles via a non-aqueous medium

Acicular shaped γ-Fe₂O₃ nanoparticles (major axis: 17±2 nm; minor axis: 1.7±1 nm) have been prepared using lauric acid as a non-aqueous medium. The products were investigated by IR, TG-DTA, XRD, Raman, SEM, TEM and magnetization measurements. For the preparation of pure γ-Fe₂O₃ nanoparticles, the suitable condition of the molar ratio of lauric acid to iron nitrate is set 2:1 and the appropriate temperature lies in the range 573–673 K. Besides, either pure α-Fe₂O₃ or a mixture of γ-Fe₂O₃ and α-Fe₂O₃ can also be obtained with the change of the molar ratio of lauric acid to iron nitrate. The experimental results indicate that the particle sizes, thermal stability and magnetic properties of the iron oxide strongly depend on the conditions in the preparation.     

Catalytic conversions of chloroolefines over iron oxide nanoparticles 3. Electronic and magnetic properties of γ-Fe2O3 nanoparticles immobilized on different silicas

Catalytic properties of superparamagnetic γ-ferric oxide nanoclusters, which are uniform in terms of size and magnetic properties were studied. The catalysts were supported on the activated silica gel matrix (AGM) prepared from the KSK-2 silica gel of globular structure and on the activated silica matrix (ASM) prepared from layered natural vermiculite. The clusters are active in some reactions of chloroolefin conversions: isomerization of dichlorobutenes and alkylation of benzene with allyl chloride. Their activity in these reactions is many times higher that of usual supported catalysts based on α-ferric oxide. Analysis of the Mössbauer spectra of the 2.5 wt.% Fe/AGM and 2.5 wt.%Fe/ASM samples before and after the reaction at T = 3–300 K shows that during the reaction some Fe^III ions arranged in ～2–3-nm γ-Fe₂O₃ nanoclusters magnetically ordered at 6 K are reduced to form a high-spin Fe^II complex in the paramagnetic state. According to the macroscopic magnetization data (SQUID) of the initial clusters, curves with hysteresis are observed at 2 K in the plots of forward and backward magnetization, while the 2.5 wt.%Fe/ASM catalyst after the reaction at T = 2 K demonstrates a linear field dependence of the magnetization passing through the coordinate origin. Analysis of the Mössbauer spectra and magnetic properties suggests that during the catalytic reaction the Fe^III ions in the γ-Fe₂O₃ nanoclusters interact with chloroolefin with the allylic structure to be partially reduced to the Fe^II ions that are bound in a complex containing chloride ions and O^II ion(s) of the silicate matrix as ligands. This is a reason, probably, for the high catalytic activity of γ-Fe₂O₃ nanoparticles.     

Preparation of nanoparticles and hollow spheres of ��-Fe2O3 and their properties

Uniform nanoparticles and hollow microspheres of hematite (??-Fe₂O₃) were obtained via a hydrothermal method by using iron (III) chloride as a precursor. The effects of reactant concentration, reaction time and temperature on the morphology of the samples were studied. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and superconducting quantum interference device magnetometer (SQUID) measurement. ??-Fe₂O₃ nanoparticles show a superparamagnetic behavior and the average size of the spherical particles was around 60 nm. However, hollow microspheres show a normal ferromagnetic behavior at room temperature with remanent magnetization and coercivity of 0.2482 emu/g and 2,516 Oe, respectively, and their average diameter was around 2 ??m. The effects of reactant concentration and reaction temperature on the formation of the products were investigated. The experimental results reveal that the magnetic properties of hematite can be tuned by controlling the morphology.     

In vitro biological evaluations of Fe3O4 compared with core–shell structures of chitosan-coated Fe3O4 and polyacrylic acid-coated Fe3O4 nanoparticles

Research on Chemical Intermediates - Today the use of magnetic nanoparticles (MNPs) is widely investigated because of their biocompatibility and nontoxicity. The objective of this study was to...     

Design and synthesis of novel triazole derivatives containing γ-lactam as potential antifungal agents

A series of novel triazole derivatives containing γ-lactam were designed and synthesized, and their structures were confirmed by ~1H NMR,~(13)CNMR and HRMS. The in vitro antifungal activities of the target compounds were evaluated. The results showed that all of the compounds exhibited stronger activity against the six clinically important fungi tested than fluconazole. 3D and 3E showed comparative activity against the fungi tested except for Candida glabrata and Aspergillus fumigatus as voriconazole. In addition,the docking model for 2A and CYP51 was investigated.     

Magnetically recoverable γ-Fe2O3 nanoparticles as a highly active catalyst for Friedel–Crafts benzoylation reaction under ultrasound irradiation

A simple, facile and efficient method has been developed for the Friedel–Crafts benzoylation of arenes using magnetic γ-Fe₂O₃ nanoparticles under solvent-free sonication. The γ-Fe₂O₃ nanoparticles were used as an efficient and magnetically recoverable catalyst for the synthesis of aromatic ketones in good to excellent yields at room temperature under solvent-free. The reaction occurred with high regioselectivity under mild condition. The magnetic γ-Fe₂O₃ nanoparticles are economically synthesized in large-scale, easily separated from the reaction mixture by an external magnet and able to be reused several times without significant loss of the catalytic performance, which make them easy application to industrial processes.     

Synthesis and magnetic properties of the γ-Fe2O3/poly-(methyl methacrylate)-core/shell nanoparticles

The synthesis of γ-Fe₂O₃/poly-(methyl methacrylate)-core/shell nanoparticles and their magnetic properties are reported. Specific γ-Fe₂O₃ nanoparticles capable of initiating atom transfer radical polymerization (ATRP) were prepared by a ligand exchange reaction of ((chloromethyl)phenylethyl)-dimethylchlorosilane and caprylate-capped γ-Fe₂O₃ nanoparticles of 4 nm in diameter, and the ATRP of methyl methacrylate was carried out subsequently. These nanoparticles were characterized with Fourier transform infrared spectroscopy, transmission electron microscopy and Mössbauer spectroscopy. Low temperature magnetic properties investigated with SQUID magnetometry revealed that the coercivity and the blocking temperature changed slightly owing to surface effects.     

Thin films of ��-Fe2O3 nanoparticles using as nonmetallic SERS-active nanosensors for submicromolar detection

A new kind of nonmetallic nanosensors based on surface-enhanced Raman spectroscopy (SERS) have been successfully prepared by the assembly of α-Fe₂O₃ nanoparticles (NPs) onto clean quartz surface via the cross-linker of hexamethylene diisocyanate (HDI). The resultant substrates have been characterized by electron micrographs, which show that the α-Fe₂O₃ NPs distribute on the modified surface uniformly with a monolayer or sub-monolayer structure. 4-mercaptopyridine (4-Mpy) and 2-mercaptobenzothiazole (2-MBT) molecules have been used as SERS probes to estimate the detection efficiency of the α-Fe₂O₃ thin films. The SERS experiments show that it is possible to record high quality SERS spectra from probe molecules on the α-Fe₂O₃ thin films at sub-micromolar ( < 10⁻⁶ mol/L) concentration. These results indicate that the highly ordered, uniformly roughed, highly sensitive and low-cost α-Fe₂O₃ thin films are excellent candidates for nonmetallic SERS-active nanosensors.     

β-Cyclodextrin derivatives hybrid Fe3O4 magnetic nanoparticles as the drug delivery for ketoprofen

β-Cyclodextrin (β-CD) and its derivatives carboxymethyl-β-CD (CM-β-CD) and 2,6-dimethyl-β-CD (DM-β-CD) modified magnetic nanoparticles (CD-MNPs) were synthesized via layer-by-layer method. CDs grafted onto Fe₃O₄ MNPs were demonstrated by transmission electron microscopy, Fourier transform infrared and Zeta potential. Magnetic properties of CM-β-CD-MNPs, DM-β-CD-MNPs and β-CD-MNPs were characterized by vibrating sample magnetometer and the magnetic saturation values were 47, 46 and 44 emu g^?1, respectively. CD-MNPs as drug carriers were investigated by inclusion behavior and in vitro release using ketoprofen (KP) as a model drug. The maximum adsorption quantities of CM-β-CD-MNPs, DM-β-CD-MNPs and β-CD-MNPs for KP were 37.03, 7.63 and 25.12 mg g^?1, respectively, and the loading behaviors followed the Langmuir adsorption isotherm model with monolayer adsorption. The release profiles of KP released from KP-loaded CD-MNPs were rapid in initial 60 min and then gradually tend to level off, the release efficiency order was CM-β-CD-MNPs > β-CD-MNPs > DM-β-CD-MNPs, which was consistent with the order of inclusion capability. Therefore, the CD-MNPs were promising candidates for drug delivery.     

Template synthesis of ε-Fe2O3 nanoparticles in opal-like matrices

Nanoparticles of ε-Fe₂O₃ were obtained by template synthesis in the pores of opal-like matrices. The maximum content of ε-Fe₂O₃ is achieved upon calcination at 1000 °C for 2–4 h. The content of ε-Fe₂O₃ in a mixture of modifications of iron oxides reaches 80–90%, which is confirmed by the data of X-ray diffraction analysis, Mössbauer spectroscopy and magnetometry experiments.     

Reaction products and kinetics of the reaction of NO2 with γ-Fe2O3

The reaction of NO(2) with Fe(2)O(3) has relevance for both atmospheric chemistry and catalysis. Most studies have focused on hematite, α-Fe(2)O(3), as it is the thermodynamic stable state of iron oxide; however, other forms of Fe(2)O(3) naturally occur and may have different chemistries. In this study, we have investigated the reaction products and kinetics for NO(2) reacting with γ-Fe(2)O(3) powder using diffuse reflectance infrared Fourier transform spectroscopy and compared the results to those of previous studies of NO(2) reacting with α-Fe(2)O(3). Both α- and γ-Fe(2)O(3) produce surface-bound nitrate at the pressures examined in this study (24-212 mTorr); surface-bound nitrite products are observed at all pressures for γ-Fe(2)O(3) whereas nitrite was only observed on α-Fe(2)O(3) at lower pressures. Surface-bound NO(+) and Fe-NO products are observed on γ-Fe(2)O(3), which have not been observed with α-Fe(2)O(3). The reaction kinetics show a first-order dependence on NO(2) pressure and this is used to support the hypothesis of unimolecular reaction of adsorbed NO(2) with the γ-Fe(2)O(3) surface as the slow step in the reaction mechanism. The difference in product formation between NO(2) reacting with γ-Fe(2)O(3) and previous studies of α-Fe(2)O(3) illustrate the fact that care must be taken in generalizing reactivity of different polymorphs.