The nonlinear stability of a heavy rigid plate supported by flexible columns

A heavy rigid platform is supported by thin elastic legs. The governing equations for large deformations are formulated and solved numerically by homotopy and quasi-Newton methods. Nonlinear phenomena such as nonuniqueness, catastrophe and hysteresis are found. A global critical load for nonlinear stability is introduced.     

Stress analysis of a flexible ring plate with circumferentially varying stiffness in a magnetic field

A problem of magnetoelasticity for a ring plate of variable stiffness is solved. A governing system of nonlinear differential equations is derived. It describes the stress–strain state of flexible conductive plates in nonstationary mechanical and electromagnetic fields. A numerical example is given. The stress state of a flexible plate of variable stiffness in a magnetic field is analyzed     

Sound emission by a vortex ring passing through a circular hole in a large flat plate

Acoustic emission has been studied experimentally when a vortex ring passes through a circular hole in a large flat plate, along its normal axis. The speed of the vortex ring is made high enough for the sound emission to be detectable, but can be regarded as sufficiently low in comparison to the sound speed. Substantial monopole and quadrupole components are observed in the detected wave profiles. Translational motion of the vortex ring in the presence of the flat plate with a hole has been observed optically, and its relation with the sound emission is determined. In this case, the power law of the acoustic pressure amplitude of monopolar vortex sound versus the translation speed U of the vortex ring is first measured in detail and is found to be U^2.1–U^2.4. This means that experimentally determined powers for the monopole components in the two half-spaces also agree approximately with the corresponding values predicted by the theory of vortex sound.     

Complex equations of flexible circular ring shells overall-bending in a meridian plane and general solution for the slender ring shells

ＩｎｔｒｏｄｕｃｔｉｏｎＥｑｕａｔｉｏｎｓｆｏｒｃｉｒｃｕｌａｒｒｉｎｇｓｈｅｌｌｓａｒｅｄｉｆｆｉｃｕｌｔｔｏｓｏｌｖｅ．Ｔｈｅｒｅｓｅａｒｃｈｏｆｔｈｉｓｐｒｏｂｌｅｍｓｔａｒｔｅｄａｔｔｈｅｂｅｇｉｎｎｉｎｇｏｆｔｈｉｓｃｅｎｔｕｒｙ．Ｉｎｔｈｅｌａｔｅ１９７０ｓａｎｄｅａｒｌｙ１９８０ｓ,Ｗ．Ｚ．Ｃｈｉｅｎ（１９７９,１９８０,１９８１）［１～３］ｒｅｂｕｉｌｔｔｈｅｃｏｍｐｌｅｘｅｑｕａｔｉｏｎｓｏｆａｘｉｓ＿ｓｙｍｍｅｔｒｉｃａｌｌｙｌｏａｄｅｄｒｉｎｇｓｈｅｌｌｓｐｒｅｓｅｎｔｅｄ…     

Stresses in a perforated circular ring

This paper presents a solution for the stresses in a perforated circular ring containing a ring of uniformly distributed circular holes. The stress function is constructed by using ring-periodic biharmonic functions. Even and odd solutions are formulated separately. The solution is illustrated by numerical examples of a ring containing six holes under two types of loading.     

Contact problem for a circular ring

International Applied Mechanics -     

Non-axisymmetric thermal stress of a functionally graded coated circular inclusion in an infinite matrix

This paper is to study the non-axisymmetric two-dimensional problem of thermal stresses in an infinite matrix with a functionally graded coated circular inclusion based on complex variable method. With using the method of piece-wise homogeneous layers, the general solution for the functionally graded coating having radial arbitrary elastic properties is derived when the matrix is subjected to uniform heat flux at infinity, and then numerical results are presented for several special examples. It is found that the existence of the functionally graded coating can change interfacial thermal stresses, and choosing proper change ways of the radial elastic properties in the coating can obviously reduce the thermal stresses.     

Wave-induced dynamics of a particle on a thin circular plate

In this paper, the dynamics of a particle placed on a thin circular plate carrying circumferential harmonic travelling wave is studied. Coulomb friction is used to model the particle–surface interaction. Distinct regions on the plate surface are identified where either of the three phases of particle motion, namely jumping, sliding and sticking, occurs. Also, the effect of wave frequency and the plate geometry on these regions is studied. Interestingly, there exists an optimum plate thickness for which the region of sliding is maximum. At certain wave frequencies, from the numerical simulations within sticking and sliding regions, it is observed that the average particle motion spirals inwards towards the plate centre. Such an average motion is observed whenever the particle is placed initially with a zero velocity relative to the plate surface. The Gedanken experiments discussed herein provide cogent explanations to all the observed average (slow) dynamics and are also found to be useful in predicting the slow dynamics of the particle a priori, that is, before the actual numerical simulations. The particle’s velocity couples the radial and tangential sliding friction components and is found to be the key physical feature that explains the observed behaviour. Also, it is observed that the plate surface excited by circumferential travelling waves can provide acoustic lubrication to a particle by reducing the limiting force required to move it relative to the surface. The methods discussed in this paper can be extended to study the dynamics of a group of particles (granular materials) and extended rigid bodies, interacting with such surface waves.

     

Unsteady vibration of a growing circular plate

Forced vibration of a thickening circular plate is studied within the framework of the small deformation theory. The plate material is assumed to be elastic and isotropic and the plate thickness to be continually increasing due to influx of material from outside. It is also assumed that the plate thickness varies with time but is independent of the space coordinates. Moreover, in the process of growth, the midsurface position does not change, which suggests that the plate grows symmetrically on both its surfaces.