Effect of ionic liquids on (vapor + liquid) equilibrium behavior of (water + 2-methyl-2-propanol)

Isobaric T, x, y data were reported for ternary systems of {water + 2-methyl-2-propanol (tert-butyl alcohol, TBA) + ionic liquid (IL)} at p = 100 kPa. When the mole fraction of TBA on IL-free basis was fixed at 0.95, measurements were performed at IL mass fractions from 0.6 down to 0.05, in a way of repeated synthesis. The vapor-phase compositions were obtained by analytical methods and the liquid-phase compositions were calculated with the aid of mass balances. Activity coefficients of water and TBA were obtained without the need of a thermodynamic model of the liquid-phase. Six ILs, composed of an anion chosen from [OAc]^? or [Cl]^?, and a cation from [emim]⁺, or [bmim]⁺, or [hmim]⁺, were studied. Relative volatility and activity coefficients were presented in relation with the IL mole fraction, showing the effect of the ILs on a molar basis. The effect of the ILs on relative volatility of TBA to water was depicted by the effect of anions and cations on, respectively, the activity coefficients of water and TBA. The results indicated that, among the six ILs studied, [emim][Cl] has the most significant effect on enhancement of the relative volatility, which reaches a value of 7.2 at an IL mass fraction of 0.58. Another IL, [emim][OAc], has also significant effect, with an appreciable value of 5.2 for the relative volatility when the IL mass fraction is 0.6. Considering the relatively low viscosity and melting point of [emim][OAc], it might be a favorable candidate as solvent for the separation of water and TBA by extractive distillation. Simultaneous correlation by the NRTL model was presented for both systems of (water + ethanol + IL) and (water + TBA + IL), using consistent binary parameters for water and IL.     

Ternary and quaternary (liquid + liquid) equilibria for (water + ethanol + α-pinene, +β-pinene,or +limonene) and (water + ethanol + α-pinene + limonene) at the temperature 298.15 K

(Liquid + liquid) equilibria and tie-lines for the ternary (water + ethanol + α-pinene, or β-pinene or limonene) and quaternary (water + ethanol + α-pinene + limonene) mixtures have been measured at T = 298.15 K. The experimental multicomponent (liquid + liquid) equilibrium data have been successfully represented in terms of the modified UNIQUAC model with binary parameters.     

Effect of ionic liquid 1-methylimidazolium chloride on the vapour liquid equilibrium of water,methanol, ethanol,and {water + ethanol} mixture

Measurements of vapour pressure data were conducted using a quasi-static ebulliometer for systems containing water, methanol, ethanol, and a mixture of {water + ethanol} in the presence of an ionic liquid (IL), namely, 1-methylimidazolium chloride ([MIm]Cl), wherein the IL-content ranged from w₂ = (0.10 to 0.50). The vapour pressure data of IL-containing binary systems were correlated by the NRTL model with an overall average absolute relative deviation (AARD) of 0.0103, and the resulting binary parameters were used to predict the vapour pressures of a ternary system {water + ethanol + [MIm]Cl} with an AARD less than 0.0077. Further, the isobaric vapour liquid equilibria (VLE) for the ternary system {water + ethanol + IL} with IL-content of w₃ = (0.10, 0.30, and 0.50) for [MIm]Cl and x₃ = 0.15 for [MIm]Cl, [C₄MIm]Cl, and [C₆MIm]Cl were predicted at 101.3 kPa, respectively. It is indicated that [MIm]Cl presents the strongest ability to enhance the relative volatility of ethanol to water in the mixture of {water + ethanol} than that of [C₄MIm]Cl and [C₆MIm]Cl, which is consistent with the cationic sizes and hence the ionic hydration ability. Therefore, distillation separation of the azeotrope of {water + ethanol} can be sufficiently facilitated by the addition of [MIm]Cl at a specified content.     

(Liquid + liquid) equilibria for (water + 1-propanol + diisopropyl ether + octane,or methylbenzene,or heptane) systems at T = 298.15 K

(Liquid + liquid) equilibria (LLE) data were presented for one ternary system of {water + octane + diisopropyl ether (DIPE)} and three quaternary systems of (water + 1-propanol + DIPE + octane, or methylbenzene, or heptane) at T = 298.15 K and p = 100 kPa. The experimental LLE data were correlated with the modified and extended UNIQUAC models. Distribution coefficients were derived from the experimental LLE data to evaluate the solubility behavior of components in organic and aqueous phases.     

(Liquid + liquid) phase equilibria for (water + 2,3-butanediol + oleyl alcohol) at T = (300.2, 307.2, and 314.2) K

(Liquid + liquid equilibrium) (LLE) data for ternary system: (water + 2,3-butanediol + oleyl alcohol) has been measured at T = (300.2, 307.2, and 314.2) K. Complete phase diagrams were obtained by determining solubility and tie-line data. Tie-line compositions were correlated by Othmer–Tobias and Bachman methods. The nonrandom two liquids equation (NRTL) was used to correlate the phase equilibrium in the system using the interaction parameters determined from experimental data. It is found that NRTL could give a good correlation for the LLE data. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

(Liquid + liquid) equilibria of (water + ethanol + dimethyl glutarate) at several temperatures

(Liquid + liquid) equilibrium (LLE) data of (water + ethanol + dimethyl glutarate) have been determined experimentally at T=(298.15,308.15 and 318.15) K. The reliability of the experimental tie-line data was ascertained by using the Othmer and Tobias correlation. The LLE data of the ternary mixture were predicted by UNIFAC method. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

Effects of external electromagnetic field on binodal curve of (water + propionic acid + dichloromethane) ternary system

The effects of an external electromagnetic field on the binodal curve of the (water + propionic acid + dichloromethane) ternary system was investigated at 91.3 kPa and T = (294.15 and 284.15) K. The experimental binodal curve values for the ternary system were obtained by the cloud point method using a new setup with a flat capacitor. The effects of variation of frequencies and amplitude of voltages of the applied external electromagnetic field on the binodal curve results have been evaluated. The results obtained indicate that the heterogeneous two-phase area increases with increasing frequency of the applied external electromagnetic field. At constant frequency, a similar effect has been found by increasing the amplitude of the voltage of the applied external electromagnetic field. The comparison between the results obtained for this work with those reported in previous work indicates that the treatment efficiency in liquid–liquid extraction process of (water + propionic acid + dichloromethane) ternary system can be governed by the applied external electromagnetic field.     

Solubilities and liquid–liquid equilibria of (water + ethanol + α,α,α-trifluorotoluene) at temperatures T = (288.15, 298.15, and 308.15) K and pressure p = 101.2 kPa

New solubility and liquid–liquid equilibrium (LLE) data of solutions of (water + ethanol + α,α,α-trifluorotoluene) are determined at three temperatures (288.15, 298.15, and 308.15) K and atmospheric pressure. The solubility and LLE data are correlated quantitatively by empirical equations, NRTL, and UNIQUAC models. The effect of temperature upon miscibility of the ternary systems is small. Practically, α,α,α-trifluorotoluene is capable to extract efficiently ethanol from its dilute aqueous solutions to obtain absolute alcohol.     

(Liquid + liquid) equilibrium for the ternary systems {heptane + toluene + 1-allyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide} and {heptane + toluene + 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide} ionic liquids

The (liquid + liquid) equilibrium (LLE) data for two systems containing heptane, toluene, and 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide ([mpim][Tf₂N]) or 1-allyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([amim][Tf₂N]) ionic liquids (ILs) were determined at T = 313.2 K and atmospheric pressure. The effect of a double bond in an alkyl side chain in the imidazolium cation was evaluated in terms of selectivity and extractive capacity. The results show a decrease of the amount of toluene and heptane dissolved in the IL with the allyl group. Thus, the distribution ratios of toluene and heptane of [mpim][Tf₂N] IL are higher than those of [amim][Tf₂N] IL. On the other hand, the separation factor of the [amim][Tf₂N] IL increases comparing to [mpim][Tf₂N] IL. The NRTL model was used to correlate satisfactorily the experimental LLE data for the two studied ternary systems.     

(Liquid + liquid) equilibria of (water + propionic acid + 2-ethyl-1-hexanol): Experimental data and correlation

(Liquid + liquid) equilibrium (LLE) data for (water + propionic acid + 2-ethyl-1-hexanol) were determined at atmospheric pressure over the temperature range of (298.15 to 308.15) K. A type-1 LLE phase diagram was obtained for this ternary system. The LLE data were correlated fairly well with UNIQUAC model, indicating the reliability of the UNIQUAC equation for this ternary system. The average root mean square deviation between the observed and calculated mole fractions was 1.57%. Distribution coefficients and separation factors were measured to evaluate the extracting capability of the solvent.     

(Liquid + liquid) equilibria of the (water + butyric acid + dodecanol) ternary system

(Liquid + liquid) equilibrium (LLE) data for the (water + butyric acid + dodecanol) ternary system have been determined experimentally at T = (298.2, 308.2 and 318.2) K. Complete phase diagrams were obtained by determining binodal curves and tie lines. The reliability of the experimental tie lines was confirmed by using the Othmer–Tobias correlation. The UNIFAC method was used to predict the phase equilibrium in the ternary system using the interaction parameters determined from experimental data of CH₃, CH₂, COOH, OH and H₂O functional groups. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

Liquid–liquid equilibria of the ternary system water + acetic acid + dimethyl succinate

Liquid–liquid equilibrium (LLE) data of water + acetic acid + dimethyl succinate were measured at 298.2, 308.2, and 318.2 K. Complete phase diagrams were obtained by determining binodal curves and tie lines. The reliability of the experimental tie line data was confirmed by using the Othmer–Tobias correlation. The UNIFAC and modified UNIFAC model were used to predict the phase equilibrium data in the ternary system. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

Binodal curve measurements for (water + propionic acid + dichloromethane) ternary system by cloud point method

The binodal (solubility) curves and tie line data for ternary systems of (water + propionic acid + dichloromethane) at 91.3 kPa and T = (277.15, 284.15, and 294.15) K are reported. The binodal curve results were determined by cloud point measurements method. A simple titration method has been used for determining of the concentration of propionic acid in the both liquid phases at equilibrium. The results obtained were successfully correlated with the UNIQUAC activity coefficient model. The deviations between experimental and calculated compositions in both phases for the ternary system using this model are reported. The partition coefficients of propionic acid and the selectivity factor of dichloromethane for extracting of propionic acid from water were calculated and are reported. The phase diagrams for the ternary system studied including both the experimental and correlated tie lines are presented.     

(Liquid + liquid) equilibrium of {water + phenol + (1-butanol,or 2-butanol,or tert-butanol)} systems

(Liquid + liquid) equilibrium (LLE) and binodal curve data were determined for the systems (water + phenol + tert-butanol) at T = 298.15 K, (water + phenol + 2-butanol) and (water + phenol + 1-butanol) at T = 298.15 K and T = 313.15 K by the combined techniques of densimetry and refractometry. Type I curve (for tert-butanol) and Type II curves (for 1- and 2-butanol) were found. The data were correlated with the NRTL model and the parameters estimated present root mean square deviations below 2% for the system with tert-butanol and lower than 0.8% for the other systems.     

Measurements and modeling of LLE and HE for (methanol + 2,4,4-trimethyl-1-pentene), and LLE for (water + methanol + 2,4,4-trimethyl-1-pentene)

Excess enthalpy (H^E) for the binary system of (methanol + 2,4,4-trimethyl-1-pentene) (TMP-1) is reported at T = 298.15 K and 101 kPa. (Liquid + liquid) equilibrium (LLE) for the same system is measured at atmospheric pressure (101 kPa). LLE for ternary system of (water + methanol + 2,4,4-trimethyl-1-pentene) is measured at T = (283 and 298) K.The parameters of Non-Random Two-Liquid (NRTL) model were regressed for the system of (methanol + TMP-1) using H^E and LLE from this work combined with isobaric (101 kPa) and isothermal (T = 331 K) VLE data from literature. The NRTL parameters for the binary system of (water + TMP-1) were fitted to a binary LLE data set from literature. NRTL parameters for the binary system of (water + methanol) were taken from ASPEN PLUS. The LLE for the ternary system was modeled by the three binary NRTL interaction parameters systems. The binary and ternary models were compared against the measured data.     

Measurements and modeling for the density of 2-methoxy-2,4,4-trimethylpentane,HE for (methanol + 2-methoxy-2,4,4-trimethylpentane), LLE for (water + 2-methoxy-2,4,4-trimethylpentane) and LLE for (water + methanol + 2-methoxy-2,4,4-trimethylpentane)

Oxygenates are used in gasoline to increase the octane number and reduce carbon monoxide emission. 2-methoxy-2,4,4-trimethylpentane (TOME) is a tertiary ether which can potentially be used in addition with current oxygenates. This compound can be produced by etherification of diisobutylene with methanol. During the etherification, water is formed due to the dehydration of methanol. The appearance of water can cause (liquid + liquid) phase split in the production process. In this work, several physical properties of systems containing water, methanol and TOME are studied for the first time. The liquid density of 2-methoxy-2,4,4-trimethylpentane is presented from T = (298.15 to 408.16) K. Excess enthalpies are reported for the binary system of (methanol + 2-methoxy-2,4,4-trimethylpentane) at (T = 298.15 K). The (liquid + liquid) equilibrium (LLE) for (water + 2-methoxy-2,4,4-trimethylpentane) from T = (283.15 to 318.15) K is determined. The LLE is also reported for the ternary system of (water + methanol + 2-methoxy-2,4,4-trimethylpentane) at T = (283.15 and 298.15) K. The UNIQUAC parameters were regressed to model VLE, excess enthalpy and LLE for the binary and ternary data with one set of parameters.     

Quaternary liquid–liquid equilibria for systems of {(water + methanol or ethanol) + m-xylene + n-dodecane}

Liquid–liquid equilibrium (LLE) data were determined for the quaternary systems of {(water + methanol or ethanol) + m-xylene + n-dodecane} at three temperatures 298.15, 303.15 and 313.15 K and atmospheric pressure. The composition of liquid phases at equilibrium was determined by gas–liquid chromatography and the results were correlated with the UNIQUAC and NRTL activity coefficient models. The partition coefficients and the selectivity factor of the solvent are calculated and compared. The phase diagrams for the quaternary systems including both the experimental and correlated tie lines are presented.     

Phase transitions on (liquid + liquid) equilibria for (water + 1-methylnaphthalene + light aromatic hydrocarbon) ternary systems at T = (563, 573, and 583) K

Phase transitions for (water + 1-methylnaphthalene + light aromatic hydrocarbon) ternary systems are observed at their (liquid + liquid) equilibria at T = (563, 573, and 583) K and (8.6 to 25.0) MPa. The phase transition pressures at T = (563, 573, and 583) K were measured for the five species of light aromatic hydrocarbons, o-, m-, p-xylenes, ethylbenzene, and mesitylene. The measurements of the phase transition pressures were carried out by changing the feed mole fraction of water and 1-methylnaphthalene in water free, respectively. Effects of the feed mole fraction of water on the phase transition pressures are very small. Increasing the feed mole fraction of 1-methylnaphthalene results in decreasing the phase transition pressures at constant temperature. The slopes depending on the feed mole fraction for 1-methylnaphthalene at the phase transition pressures are decreased with increasing temperature for (water + 1-methylnaphthalene + p-xylene), (water + 1-methylnaphthalene + o-xylene), and (water + 1-methylnaphthalene + mesitylene) systems. For xylene isomers, the highest and lowest of the phase transition pressures are obtained in the case of p- and o-xylenes, respectively. The phase transition pressures for ethylbenzene are lower than those in the case of p-xylene. The similar phase transition pressures are given for p-xylene and mesitylene.     

(Liquid + liquid) equilibria in (water + ethanol + 2-ethyl-1-hexanol) at T=(298.2, 303.2, 308.2, and 313.2) K

(Liquid + liquid) equilibrium data for (water + ethanol + 2-ethyl-1-hexanol) were measured at atmospheric pressure in the temperature range (298.2 to 313.2) K. A type 1 (liquid + liquid) phase diagram was obtained for this ternary system. The experimental tie-line data for this system were correlated with the UNIQUAC solution model. The values of the interaction parameters between each pair of components in the system were obtained for the UNIQUAC model with the experimental results. The root mean square deviation between the observed and calculated mole per cent was 1.70%. The mutual solubility of 2-ethyl-1-hexanol and water was also investigated by the addition of ethanol at different temperatures.     

Isobaric vapor–liquid equilibria for 1-propanol + water + copper(II) chloride at 100 kPa

Isobaric vapor–liquid equilibria for the ternary system 1-propanol + water + copper(II) chloride has been measured at 100 kPa using a recirculating still. The addition of copper(II) chloride to the solvent mixture produced a salting-out effect of the alcohol, but the azeotrope did not tend to be eliminated when the salt content increased. The experimental data sets were fitted with the electrolyte NRTL model and the parameters of Mock's model were estimated. This model has proved to be suitable to represent experimental data in the entire range of compositions. The effect of copper(II) chloride on the vapor–liquid equilibrium of the 1-propanol + water system has been compared with that produced by other salts.