Direct reversible voltammetry and electrocatalysis with surface-stabilised Fe2O3 redox states

Nanoparticle film voltammetry is employed to explore the presence and reactivity of surface-stabilised iron redox centers at the interface of immobilised Fe₂O₃ nanoparticles of ca. 4 nm diameter and aqueous buffer media. Mesoporous films of Fe₂O₃ nanoparticles on tin-doped indium oxide (ITO) substrates are formed in a layer-by-layer deposition process from aqueous colloidal Fe₂O₃ and aqueous cyclohexyl-hexacarboxylate followed by thermal (500 °C) removal of the organic binder content. Both reversible oxidation and reversible reduction responses for Fe(III) are observed in phosphate and carbonate buffer media in the “underpotential” zone. Higher oxidation states of iron formed anodically (here tentatively assigned to Fe(IV)) are shown to be inert in phosphate buffer media but reactive towards the oxidation of glucose in carbonate buffer media.     

Removal of arsenic from aqueous solution: A study of the effects of pH and interfering ions using iron oxide nanomaterials

Nanophase Fe₃O₄ and Fe₂O₃ were synthesized through a precipitation method and were utilized for the removal of either arsenic (III) or (V) from aqueous solution as a possible method for drinking water treatment. The synthesized nanoparticles were characterized using X-ray diffraction, which showed that the Fe₃O₄ and the Fe₂O₃ nanoparticles had crystal structures of magnetite and hematite, respectively. In addition, Secherrer's equation was used to determine that the grain size nanoparticles were 12 ± 1.0 nm and 17 ± 0.5 nm for the Fe₂O₃ and Fe₃O₄, respectively. Under a 1 h contact time, batch pH experiments were performed to determine the optimum pH for binding using 300 ppb of either As(III) or (V) and 10 mg of either Fe₃O₄ or Fe₂O₃. The binding was observed to be pH independent from pH 6 through pH 9 and a significant drop in the binding was observed at pH 10. Furthermore, batch isotherm studies were performed using the Fe₂O₃ and Fe₃O₄ to determine the binding capacity of As(III) and As(V) to the iron oxide nanomaterials. The binding was found to follow the Langmuir isotherm and the capacities (mg/kg) of 1250 (Fe₂O₃) and 8196 (Fe₃O₄) for As(III) as well as 20,000 (Fe₂O₃) and 5680 (Fe₃O₄) for As(III), at 1 and 24 h of contact time, respectively. The As(V) capacities were determined to be 4600 (Fe₂O₃), 6711(Fe₃O₄), 4904 (Fe₂O₃), and 4780 (Fe₃O₄) mg/kg for nanomaterials at contact times of 1 and 24 h respectively.     

Magnetically recyclable Schiff-based palladium nanocatalyst [Fe3O4@SiNSB-Pd] and its catalytic applications in Heck reaction

A magnetically separable palladium nanocatalyst has been synthesized through the immobilization of palladium onto 3-aminopropylphenanthroline Schiff based functionalized silica coated superparamagnetic Fe₃O₄ nanoparticles. The nanocatalyst (Fe₃O₄@SiNSB-Pd) was fully characterized using several spectroscopic techniques, such as FT-IR, HR-SEM, TEM, XRD, ICP, and XPS. The microscopic image of Fe₃O₄ showed spherical shape morphology and had an average size of 150 nm. The Pd-nanoparticles exhibited an average size 3.5 ± 0.6 nm. The successful functionalization of Fe₃O₄@SiNSB-Pd was identified by FT-IR spectroscopy and the appearance of palladium species in Fe₃O₄@SiNSB-Pd was confirmed by XRD analysis. While XPS has been utilized for the determination of the chemical oxidation state of palladium species in Fe₃O₄@SiNSB-Pd. Several activated and deactivated arene halides and olefines were employed for Mizoroki-Heck cross-coupling reactions in the presence of Fe₃O₄@SiNSB-Pd, each of which produced the respective cross-coupling products with excellent yields. The Fe₃O₄@SiNSB-Pd shows good reactivity and reusability for up to seven consecutive cycles.     

Lithium storage in hollow spherical ZnFe2O4 as anode materials for lithium ion batteries

Hollow microspheres composed of phase-pure ZnFe₂O₄ nanoparticles (hierarchically structured) have been prepared by hydrothermal reaction. The unique hollow spherical structure significantly increases the specific capacity and improves capacity retention of this material. The product of each phase transition during initial discharge (ZnFe₂O₄ ? Li_0.5ZnFe₂O₄ ? Li₂ZnFe₂O₄ → Li₂O + Li–Zn + Fe) and their structural reversibility are recognized by X-ray diffraction and electrochemical characterization. The products of the deeply discharged (Li–Zn alloy and Fe) and recharged materials (Fe₂O₃) were clarified based on high resolution transmission electron microscopic technique and first-principle calculations.     

Investigation of Iron-based Nanoparticles Action by Solid-phase Voltammetry

The electrochemical conversion of Fe₂O₃ nano-particles from the surface of carbon paste electrode was investigated by solid-phase voltammetry. Cyclic voltammetric curves of Fe₂O₃ nanoparticles transformations were recorded in direct current (first derivative) mode with a potential change at the speed of 80-90 mV/s in the potential range from -1.2 to +1.0 V. The dependence of the anodic peak of Fe₂O₃ nanoparticles on exposure time in a background electrolyte was researched and the method for identifying and quantification of solid-phase nanoparticles of Fe₂O₃ was developed. The results of determination were tested by a standard addition method.     

Isolable C@Fe3O4 nanospheres supported cubical Pd nanoparticles as reusable catalysts for Stille and Mizoroki-Heck coupling reactions

Cubical Pd nanoparticles incorporated magnetic nanospheres (Pd cNPs/C@Fe₃O₄) are found to be efficient catalysts for Stille and Mizoroki-Heck coupling reactions. A variety of aryl halides, including chlorides, are converted to biaryls and diphenylethenes with excellent yield and high TON. This immobilization of Pd cNPs on the surface C@Fe₃O₄ results in structurally stable catalytic sites. The observed enhanced catalytic activity is attributed to the high density of low-coordinated Pd {1 0 0} atoms present at the surface of the Pd cNPs/C@Fe₃O₄ catalyst. The advantages of the proposed catalytic system are its heterogeneity, high stability, absence of any toxic ligands, gram scale applicability, magnetic separability and consequent reusability.     

Iron (III) nanocomposites for enzyme-less biomimetic cathode: A promising material for use in biofuel cells

In this paper, we discuss the synthesis and electrochemical properties of a new material based on iron oxide nanoparticles stabilized with poly(diallyldimethylammonium chloride) (PDAC); this material can be used as a biomimetic cathode material for the reduction of H₂O₂ in biofuel cells. A metastable phase of iron oxide and iron hydroxide nanoparticles (PDAC–FeOOH/Fe₂O₃-NPs) was synthesized through a single procedure. On the basis of the Stokes–Einstein equation, colloidal particles (diameter: 20 nm) diffused at a considerably slow rate (D = 0.9 × 10^? 11 m s^? 1) as compared to conventional molecular redox systems. The quasi-reversible electrochemical process was attributed to the oxidation and reduction of Fe³⁺/Fe²⁺ from PDAC–FeOOH/Fe₂O₃-NPs; in a manner similar to redox enzymes, it acted as a pseudo-prosthetic group. Further, PDAC–FeOOH/Fe₂O₃-NPs was observed to have high electrocatalytic activity for H₂O₂ reduction along with a significant overpotential shift, ΔE = 0.68 V from ? 0.29 to 0.39 V, in the presence and absence of PDAC–FeOOH/Fe₂O₃-NPs. The abovementioned iron oxide nanoparticles are very promising as candidates for further research on biomimetic biofuel cells, suggesting two applications: the preparation of modified electrodes for direct use as cathodes and use as a supporting electrolyte together with H₂O₂.     

Studies on Fe–Co spinel electrodes

FeCo₂O₄ spinel oxide pelleted electrodes were prepared from the respective powders, obtained by low-temperature coprecipitation method. X-ray diffraction studies suggest the coexistence of two spinel phases, with different a-cell parameters. The samples show semiconductor-type behaviour, in the range 530–340 K. The estimated activation energy for conduction is about 0.7 eV. These phases are stable, after being used as electrode materials, as the XRD and SEM/EDS results show. Cyclic voltammetry has been used to investigate the electrochemical behaviour of the FeCo₂O₄ electrodes in 1 mol dm⁻³ KOH aqueous solutions. The voltammetric data allowed finding out the redox reactions occurring at the electrode surface, namely Fe₃O₄·4H₂O/Fe(OH)₂ or Fe₃O₄/Fe₂O₃ and CoO₂/CoOOH by comparing the experimental results with those referred in the literature.     

Facile synthesis of Fe3O4 nanoparticles by reduction phase transformation from γ-Fe2O3 nanoparticles in organic solvent

A phase transformation induced by the reduction of as-synthesized γ-maghemite (γ-Fe₂O₃) nanoparticles was performed in solution by exploiting the reservoir of reduction gas (CO) generated from the incomplete combustion reaction of organic substances in the reactor. Results from X-ray diffraction, color indicator, and magnetic analysis using a SQUID strongly support this phase transformation. Based on this route, monodisperse magnetite (Fe₃O₄) nanoparticles were simply produced in the range from 260 to 300 °C. Almost all aspects of the original γ-Fe₂O₃ nanoparticles, such as shape, size, and monodispersity, were maintained in the produced Fe₃O₄ nanoparticles.     

Palladium immobilized on amidoxime‐functionalized magnetic Fe3O4 nanoparticles: a highly stable and efficient magnetically recoverable nanocatalyst for sonogashira coupling reaction

We describe the synthesis of a novel Fe₃O₄/amidoxime (AO)/Pd nanocatalyst by grafting of AO groups on Fe₃O₄ nanoparticles and subsequent deposition of Pd nanoparticles. Prior to grafting of AO, the 2‐cyanoethyl‐functionalized Fe₃O₄ nanoparticles prepared through combining 2‐cyanoethyltriethoxysilane and Fe₃O₄ were treated with hydroxylamine. The AO‐grafted Fe₃O₄ nanoparticles were then used as a platform for the deposition of Pd nanoparticles. The catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, scanning and transmission electron microscopies, vibrating sample magnetometry, wavelength‐ and energy‐dispersive X‐ray spectroscopies and inductively coupled plasma analysis. Fe₃O₄/AO/Pd is novel phosphine‐free recyclable heterogeneous catalyst for Sonogashira reactions. Interestingly, the novel catalyst could be recovered in a facile manner from the reaction mixture by applying an external magnet device and recycled seven times without any significant loss in activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Pectin mediated green synthesis of Fe3O4/Pectin nanoparticles under ultrasound condition as an anti-human colorectal carcinoma bionanocomposite

This work described the one-pot synthesis of apple pectin encapsulated Fe₃O₄ nanoparticles (Fe₃O₄/Pectin NPs) which is prepared by co-precipitation of Fe(II/(III) ions in alkaline solution mediated by pectin under ultrasound condition. This process led to formation of magnetic nanoparticles within the network of pectin. Physicochemical characterization of the as-synthesized Fe₃O₄/Pectin NPs was carried out through electron microscopy (SEM and TEM), energy dispersive X-ray spectroscopy (EDX), vibrating sample magnetometer (VSM) and X-ray diffraction (XRD). The in vitro cytotoxic and anti-colorectal cancer effects of biologically synthesized Fe₃O₄/Pectin NPs against Ramos.2G6.4C10, HCT-8 [HRT-18], HCT 116, and HT-29 cancer cell lines were assessed. The anti-colorectal cancer properties of the Fe₃O₄/Pectin NPs could significantly remove Ramos.2G6.4C10, HCT-8 [HRT-18], HCT 116, and HT-29 cancer cell lines in a time and concentration-dependent manner by MTT assay. The IC₅₀ of the Fe₃O₄/Pectin NPs were 317, 337, 187, and 300 µg/mL against Ramos.2G6.4C10, HCT-8 [HRT-18], HCT 116, and HT-29 cancer cell lines. The antioxidant activity of Fe₃O₄/Pectin NPs was determined by DPPH method. The Fe₃O₄/Pectin NPs showed the high antioxidant activity according to the IC₅₀ value. It seems that the anti-human colorectal cancer effect of recent nanoparticles is due to their antioxidant effects.     

Mesoporous Fe2O3 nanoparticles as high performance anode materials for lithium-ion batteries

This work introduces an effective, inexpensive, and large-scale production approach to the synthesis of Fe₂O₃ nanoparticles with a favorable configuration that 5 nm iron oxide domains in diameter assembled into a mesoporous network. The phase structure, morphology, and pore nature were characterized systematically. When used as anode materials for lithium-ion batteries, the mesoporous Fe₂O₃ nanoparticles exhibit excellent cycling performance (1009 mA h g^− 1 at 100 mA g^− 1 up to 230 cycles) and rate capability (reversible charging capacity of 420 mA h g^− 1 at 1000 mA g^− 1 during 230 cycles). This research suggests that the mesoporous Fe₂O₃ nanoparticles could be suitable as a high rate performance anode material for lithium-ion batteries.     

Recyclable Fenton-like catalyst based on zeolite Y supported ultrafine,highly-dispersed Fe2O3 nanoparticles for removal of organics under mild conditions

The active Fenton-like catalyst, obtained by highly dispersed Fe₂O₃ nanoparticles in size of 5 nm on the surface of zeolite Y, shows the excellent degradation efficiency to phenol higher than 90% under the mild conditions of room temperature and neutral solution, and the catalyst can be easily recovered with stable catalytic activity for 8 cycles.     

Synthesis and applications of Fe3O4-diisopropylaminoacetamide as a versatile and reusable magnetic nanoparticle supported N,N-diisopropylethylamine equivalent

A magnetic nanoparticle supported N,N-diisopropylaminoacetamide (Fe₃O₄-DIPA) was developed for application as a magnetic recoverable, and reusable N,N-diisopropylethylamine equivalent. The Fe₃O₄ nanoparticles were coated with a silica layer using the sol-gel method, followed by surface modification with 3-aminopropyltriethoxysilane. Subsequent acylation with chloroacetyl chloride and chlorine displacement with diisopropylamine afforded Fe₃O₄-DIPA in 90% yield with a loading of 0.96 mmol/g. The applicability of Fe₃O₄-DIPA was demonstrated in the synthesis of amine derivatives cv sulfonation, acylation, and N-alkylation reactions. The desired products were obtained in excellent yields and purities after scavenging the residual starting amines by treatment with silica-supported dichlorotriazine. Fe₃O₄-DIPA was readily recovered by separation using a magnet and could be reused several times without significant loss of reactivity.     

Preparation of core-shell magnetic Fe3O4@SiO2-dithiocarbamate nanoparticle and its application for the Ni2+, Cu2+ removal

A typical superparamagnetic nanoparticles-based dithiocarbamate absorbent (Fe₃O₄@SiO₂-DTC) with core-shell structure was applied for aqueous solution heavy metal ions Ni²⁺, Cu²⁺ removal.     

Ni ion-containing immobilized ionic liquid on magnetic Fe3O4 nanoparticles: An effective catalyst for the Heck reaction

In this work, we synthesized Ni²⁺-containing 1-methyl-3-(3-trimethoxysilylpropyl) imidazolium chloride ionic liquid on magnetic Fe₃O₄ nanoparticles. The catalytic activity of these novel nanocomposites was finally evaluated for the Heck reaction at 100 °C, and can be reused after washing without loss in activity. The immobilized ionic liquid catalysts proved to be effective and easily separated from the reaction media by applying an external magnetic field. This procedure has many obvious advantages compared to those reported in the previous literature, including avoidance of the use of the expensive Pd catalysts, mild reaction conditions, high yields, and simplicity of the methodology.     

Nanorods of transition metal oxalates: A versatile route to the oxide nanoparticles

A versatile route has been explored for the synthesis of nanorods of transition metal (Cu, Ni, Mn, Zn, Co and Fe) oxalates using reverse micelles. Transmission electron microscopy shows that the as-prepared nanorods of nickel and copper oxalates have diameter of 250 nm and 130 nm while the length is of the order of 2.5 μm and 480 nm, respectively. The aspect ratio of the nanorods of copper oxalate could be modified by changing the solvent. The average dimensions of manganese, zinc and cobalt oxalate nanorods were 100 μm, 120 μm and 300 nm, respectively, in diameter and 2.5 μm, 600 nm and 6.5 μm, respectively, in length. The aspect ratio of the cobalt oxalate nanorods could be modified by controlling the temperature.The nanorods of metal (Cu, Ni, Mn, Zn, Co and Fe) oxalates were found to be suitable precursors to obtain a variety of transition metal oxide nanoparticles. Our studies show that the grain size of CuO nanoparticles is highly dependent on the nature of non-polar solvent used to initially synthesize the oxalate rods. All the commonly known manganese oxides could be obtained as pure phases from the single manganese oxalate precursor by decomposing in different atmospheres (air, vacuum or nitrogen). The ZnO nanoparticles obtained from zinc oxalate rods are ～55 nm in diameter. Oxides with different morphology, Fe₃O₄ nanoparticles faceted (cuboidal) and Fe₂O₃ nanoparticles (spherical) could be obtained.     

Magnetite/carbon core-shell nanorods as anode materials for lithium-ion batteries

Carbon coated magnetite (Fe₃O₄) core-shell nanorods were synthesized by a hydrothermal method using Fe₂O₃ nanorods as the precursor. Transmission electron spectroscopy (TEM) and high resolution TEM (HRTEM) analysis indicated that a carbon layer was coated on the surfaces of the individual Fe₃O₄ nanorods. The electrochemical properties of Fe₃O₄/carbon nanorods as anodes in lithium-ion cells were evaluated by cyclic voltammetry, ac impedance spectroscopy, and galvanostatic charge/discharge techniques. The as-prepared Fe₃O₄/C core-shell nanorods show an initial lithium storage capacity of 1120 mAh/g and a reversible capacity of 394 mAh/g after 100 cycles, demonstrating better performance than that of the commercial graphite anode material.     

A simplistic one-pot method to produce magnetic graphene-CdS nanocomposites

A simple, yet novel process was developed where magnetic graphene-CdS (Fe₃O₄-CdS/G) nanocomposites were prepared by a one-pot solvothermal route in which the reduction of graphite oxide (GO) into graphene was accompanied by the generation of CdS and Fe₃O₄ nanoparticles. The results of TEM and XRD studies indicate the formation of Fe₃O₄-CdS/G nanocomposites. Besides vibration sample magnetometry, fluorescence spectra and loading of doxorubicin (DOX) reveal that this new nanocomposite possesses good superparamagnet (44.85 emu/g), good fluorescent properties and a high loading efficiency (0.98 mg/mg). The efficient, stable, and water soluble nanocomposites are confirmed to be suitable for biomedical applications.     

Study on the valence fluctuation and the magnetism of an iron mixed-valence complex, (n-C4H9)4N[FeIIFeIII(mto)3](mto = C2O3S)

In the case of iron mixed-valence complexes whose spin states are situated in the spin-crossover region, conjugated phenomena coupled with spin and charge are expected. In general, the Fe site coordinated by six S atoms is in the low-spin state, while the Fe site coordinated by six O atoms is in the high-spin state. From this viewpoint, we have synthesized and investigated physical properties for an monothiooxalato-bridged (mto = C₂O₃S) iron mixed-valence complex, (n-C₄H₉)₄N[Fe^IIFe^III(mto)₃], consisting of Fe^IIIO₃S₃ and Fe^IIO₆ octahedra, which behaves as a ferrimagnet with its magnetic transition temperature of T_N = 38 K and Weiss temperature of θ = ?93 K. From the analysis of ⁵⁷Fe Mössbauer spectra of ⁵⁷Fe enriched complexes, (n-C₄H₉)₄N[⁵⁷Fe^IIFe^III(mto)₃] and (n-C₄H₉)₄N[Fe^II57Fe^III(mto)₃], the charge transfer between Fe^II and Fe^III exists in the paramagnetic phase. Considering the time window of ⁵⁷Fe Mössbauer spectroscopy, the time scale of the valence fluctuation is at least slower than 10^?7 s. In order to confirm the valence fluctuation between Fe^II and Fe^III, we investigated the dielectric constant and found an anomalous enhancement attributed to the Fe valence fluctuation between 170 and 250 K.