Volumetric and ultrasonic behaviour of binary mixtures of 1-nonanol with o-cresol,m-cresol,p-cresol and anisole at T = (293.15 and 313.15) K

Densities, ρ, and speeds of sound, u, of binary liquid mixtures of 1-nonanol with o-cresol, m-cresol, p-cresol and anisole have been measured over the entire range of composition at T = (293.15 and 313.15) K and at atmospheric pressure. Using these data, the excess molar volume, V^E, molar free volume, V_f, parameters related to space-filling ability, V_f/V, non-linearity parameters, B/A, isentropic compressibility, κ_S, molar isentropic compressibility, K_S,m, deviation of molar isentropic compressibility, $K_{S\text{,}m}^E$, deviations of the speed of sound, u^D, and limiting excess partial molar volume, ${\overline{V}}_{m\text{,}i}^{E\text{,}0}$, and isentropic compressibility, ${\overline{K}}_{m\text{,}i}^{E\text{,}0}$, have been calculated. The calculated excess and deviation functions have been fitted to the Redlich–Kister polynomial equations and the results analyzed in terms of molecular interactions and structural effects.     

Excess molar volume along with viscosity,refractive index and relative permittivity for binary mixtures of exo-tetrahydrodicyclopentadiene with four octane isomers

The fundamental physical properties including density, viscosity, refractive index and relative permittivity, have been measured for binary mixtures of exo-tetrahydrodicyclopentadiene (JP-10) with four octane isomers (n-octane, 3-methylheptane, 2,4-dimethylhexane and 2,2,4-trimethylpentane) over the whole composition range at temperatures T = (293.15 to 313.15) K and pressure p = 0.1 MPa. The values of excess molar volume $\left(V_{\text{m}}^{\text{E}}\right)$, viscosity deviation (Δη), refractive index deviation (Δn_D) and relative permittivity deviation (Δε_r) are then calculated. All of the values of $V_{\text{m}}^{\text{E}}$ and Δη are observed to be negative, while those of Δn_D and Δε_r are close to zero. The effects of temperature and composition on the variation of $V_{\text{m}}^{\text{E}}$ values are discussed. The negative values of $V_{\text{m}}^{\text{E}}$ and Δη are conductive to high-density and low-resistance of fuels, which is favorable for the design and preparation of advanced hydrocarbon fuels.     

Studies of thermophysical properties of binary liquid mixtures of amine and alcohols at various temperatures

The density ρ and speed of sound u of the binary mixtures of ethylenediamine (EDA) with alcohols (1-hexanol, 1-octanol, and 1-decanol) were measured at temperatures from (293.15 to 313.15) K and viscosity η at (298.15 to 308.15) K over the entire composition range and at atmospheric pressure. Using the experimental values of density, viscosity and speed of sound, the excess molar volume $V_m^E$, viscosity deviation Δη, deviation in speed of sound u^D, deviation in isentropic compressibility Δκ_s were calculated. These results were fitted to the Redlich–Kister type polynomial equation. The variations of these excess parameters with composition were discussed from the viewpoint of intermolecular interactions in these mixtures. The excess properties are found to be either positive or negative depending on the molecular interactions and the nature of liquid mixtures. Further, the viscosity data have been used and analyzed in terms of Heric−Brewer and McAllister models.     

Thermodynamic and physicochemical properties of binary mixtures of nitromethane with {2-methoxyethanol + 2-butoxyethanol} systems at T = (293.15, 298.15, 303.15, 308.15, and 313.15) K

The density, relative permittivity, viscosity and speed of sound at T = (293.15, 298.15, 303.15, 308.15, and 313.15) K in the binary mixtures of nitromethane with 2-methoxyethanol and 2-butoxyethanol have been measured as a function of composition. From the experimental results, the excess molar volumes V^E, excess Gibbs free energy of activation for viscous flow $(\mathrm{\Delta }{G}^{1E})$, excess isentropic compressibility $({\kappa }_s^E)$ and the deviations in the relative permittivity, viscosity, and speed of sound from a mole fraction average have been calculated. The viscosity data, at T = 298.15 K, were correlated with equations of Hind et al., Grunberg and Nissan, Frenkel, and McAllister. The results are discussed in terms of intermolecular interactions and structure of studied binary mixtures.     

Permittivity and density of the systems (monoglyme,diglyme, triglyme,or tetraglyme + n-heptane) at several temperatures

Relative permittivity and density on mixing at atmospheric pressure and temperatures from (288.15 to 308.15) K and atmospheric pressure have been measured over the entire composition range of mixing for {CH₃O(CH₂CH₂O)_mCH₃ with m = 1, 2, 3, 4 (also called monoglyme, diglyme, triglyme, or tetraglyme) + n-heptane}. The permittivity values were fitted as a function of the volume fraction and temperature to a logarithmic equation. The excess permittivity is calculated considering a definition that has been recently established in terms of the volume fraction. Excess molar volumes on mixing for the above systems have also been calculated. The density and excess molar volumes were fitted as a function of both mole fraction and temperature to a polynomial equation. The temperature dependence of derived magnitudes, $(?V_{\text{m}}^{\text{E}}/?T{)}_{P\text{,}x}$ and $(?H_{\text{m}}^{\text{E}}/?P{)}_{T\text{,}x}$, was computed, given their importance in the study of specific molecular interactions. The experimental values of permittivity have been compared to those estimated by usual models of literature and the results indicate that the predictions are better when the volume change on mixing is incorporated in calculations. From the values of permittivity and density on mixing the dipole moment for tetraglyme was calculated. The work concludes with an interpretation of the sign of excess permittivity and its behaviour with temperature and that of excess molar volume.     

Thermodynamic and spectroscopic studies on binary mixtures of imidazolium ionic liquids in ethylene glycol

The thermodynamic behaviour of imidazolium based ionic liquids (ILs), 1-butyl-3-methylimidazolium chloride [C₄mim][Cl]; 1-octyl-3-methylimidazolium chloride [C₈mim][Cl], and 1-butyl-3-methylimidazolium methylsulfate [C₄mim][C₁OSO₃] in ethylene glycol [HOCH₂CH₂OH] (EG) have been investigated over the whole composition range at T = (298.15 to 318.15) K to probe the interactions in bulk. For the purpose, volumetric properties such as excess molar volume, $V_m^E$, apparent molar volume, V_?,i, and its limiting values at infinite dilution, $V_{?\text{,}i}^{\infty }$, have been calculated from the experimental density measurements. The molecular scale interactions between ionic liquids and EG have been investigated through Fourier transform infrared (FTIR) and ¹H NMR spectroscopy. The shift in the vibrational frequency for C–H stretch of aromatic ring protons of ILs and O–H stretch of EG molecules has been analysed. The NMR chemical shifts for various protons of RTILS or EG molecules and their deviations show multiple hydrogen bonding interactions of varying strengths between RTILs and EG in their binary mixtures.     

Thermodynamic investigation of methyl salicylate/1-pentanol binary system in the temperature range from 278.15 K to 303.15 K

Densities (ρ), speeds of sound (u), isentropic compressibilities (k_s), refractive indices (n_D), and surface tensions (σ) of binary mixtures of methyl salicylate (MSL) with 1-pentanol (PEN) have been measured over the entire composition range at the temperatures of 278.15 K, 288.15 K, and 303.15 K. The excess molar volumes (V^E), excess surface tensions (σ^E), deviations in speed of sound (Δu), deviations in isentropic compressibility (Δk_s), and deviations in molar refraction (ΔR) have been calculated. The excess thermodynamic properties V^E, σ^E, Δu, Δk_s, and ΔR were fitted to the Redlich–Kister polynomial equation and the A_k coefficients as well as the standard deviations (d) between the calculated and experimental values have been derived. The surface tension (σ) values have been further used for the calculation of the surface entropy (S^S) and the surface enthalpy (H^S) per unit surface area. The lyophobicity (β) and the surface mole fraction $(x_2^{\text{S}})$ of the surfactant component PEN have been also derived using the extended Langmuir model. The results provide information on the molecular interactions between the unlike molecules that take place at the surface and the bulk.     

Physico-chemical properties of some electrolytes in water and aqueous sodiumdodecyl sulfate solutions at different temperatures

The viscosities of some mineral salt viz.; potassium chloride, potassium nitrate, magnesium chloride, magnesium nitrate, at different concentrations have been determined in water and in binary aqueous solution of sodiumdodecyl sulfate (SDS) (0.007 mol · kg⁻¹ and 0.01 mol · kg⁻¹) at different temperatures. The data have been analyzed using Jones–Dole equation and the derivative parameters B and A have been interpreted in terms of ion–solvent and ion–ion interactions respectively. The change of Gibbs free energy of activation $(\mathrm{\Delta }{G}_{\eta }^{\ne })$, enthalpy of activation $(\mathrm{\Delta }{H}_{\eta }^{\ne })$, and entropy of activation $(\mathrm{\Delta }{S}_{\eta }^{\ne })$ for viscous flow of the solutions were calculated using Eyring equation, which depicts the mechanism of viscous flow. The structure making/breaking nature of the studied electrolytes has been discussed in the light of first derivative of B-coefficient (dB/dT) over temperatures. Potassium chloride and potassium nitrate acts as structure breaker in water where as all the salts are structure makers in aqueous SDS solutions, i.e. the postmicellar and pre-micellar regions.     

A comparative study of thermophysical and spectroscopic properties in mixtures of isomeric butanediol and N,N-dimethylformamide

The thermodynamic parameters viz. excess molar volume V^E and ultrasonic speed u, transport parameter viscosity η, and spectroscopic parameters viz. IR, ¹H, ¹³C NMR have been measured for the mixtures of isomeric butanediol (1,2-, 1,3-, 1,4- and 2,3-butanediol) and N,N-dimethylformamide over the whole composition range at 308.15 K. The partial molar quantities $Q_i^{\mathrm{E}}$, isentropic compressibility $K_{\mathrm{S}}^{\mathrm{E}}$, deviation in ultrasonic velocity u^D, viscosity deviation Δη, deviation in Gibbs energies of activation for viscous flow g(x), and excess NMR chemical shift δ^E have also been estimated and analyzed. Results show that the interaction between unlike molecules takes place through hydroxyl groups of isomeric butanediol and >CO group of N,N-dimethylformamide. Excellent correlation between thermodynamic and spectroscopic measurements is observed.     

Thermodynamics of solvation of some small peptides in water at T = 298.15 K

The enthalpies of solution in water, Δ_solH_m, of some small peptides, namely the amides of five N-acetyl substituted amino acids of glycine, l-alanine, l-proline, l-valine, l-leucine and two cyclic anhydrides of glycine and l-sarcosine (diketopiperazines), were measured by isothermal calorimetry at T = (296.84, 306.89, and 316.95) K. The enthalpies of solution at infinite dilution at T = 298.15 K were derived and added to the enthalpies of sublimation, ${\mathrm{\Delta }}_{\mathrm{sub}}{H}_{\mathrm{m}}^{\circ }$, at the same temperature, to obtain the corresponding solvation enthalpies at infinite dilution, ${\mathrm{\Delta }}_{\mathrm{solv}}{H}_{\mathrm{m}}^{\infty }$. Moreover, the partial molar heat capacities at infinite dilution at T = 298.15 K, $C_{p\text{,}2}^{\infty }$, were calculated by adding molar heat capacities of solid small peptides, C_p,m(cr), to the ${\mathrm{\Delta }}_{\mathrm{sol}}{C}_{p\text{,}\mathrm{m}}^{\infty }$ values obtained from our experimental data. CH₂ group contributions, in terms of solvation enthalpy and partial molar heat capacity, were −3.2 kJ · mol⁻¹ and 89.3 J · K⁻¹ · mol⁻¹, respectively, in good agreement with the literature data. Simple additive methods were used to estimate the average molar enthalpy of solvation and partial molar heat capacity at infinite dilution for the 1/2CONH⋯CONH functional group in the small peptides. Values obtained were −46.7 kJ · mol⁻¹ for solvation enthalpy and −42.4 J · K⁻¹ · mol⁻¹ for partial molar heat capacity, significantly lower than values obtained for the CONH functional group in monofunctional model compounds.     

Compressibility and volumetric studies of polyethylene-glycols in aqueous,methanolic, and benzene solutions at T = 298.15 K

The speed of sound and density measurements in water, methanol, and benzene solutions for the solutes PEG-400, PEG-1000, and PEG-4000 at T = 298.15 K (0.05 to 0.5 mol · kg⁻¹) are reported. The data obtained are used to calculate thermodynamic parameters such as adiabatic (isentropic) compressibility of solutions (β_ad), apparent molar volume (ϕ_V) and apparent molar compressibility (ϕ_K) for solute molecules in all the solvent media. The limiting partial molar volume $({\varphi }_V^{\circ })$ and limiting partial molar compressibility $({\varphi }_K^{\circ })$ of solute molecules are used to estimate volume of transfer and compressibility of transfer for PEG molecules from methanol to aqueous and benzene to aqueous media. The high observed negative $({\varphi }_K^{\circ })$ values in methanol are interpreted in terms of breakdown of one-dimensional H-bonded structure of methanolic molecules. The (${\varphi }_K^{\circ })$ values observed in water although negative but of small magnitude as compared to salts in water. Attempt is made to estimate hydration number for these molecules in aqueous solutions by applying Shiio’s method and it is observed that PEG-4000 is hydrated most. These results are discussed in terms of solute–solvent and hydrophobic interactions and effects due to conformational characteristic of high molecular weight glycol molecules.     

Effect of temperature on volumetric and transport properties of nanofluids containing ZnO nanoparticles poly(ethylene glycol) and water

The nanoparticles of ZnO have been dispersed in base fluids of poly(ethylene glycol), PEG, and its aqueous solutions. Stability of these nanofluids has been verified with UV-Vis spectroscopy. Dynamic light scattering and size analyze laser methods were used to obtain particle size of the nanofluids investigated. The density, speed of sound and viscosity values for these nanofluids have been measured at T = (293.15, 298.15, 308.15 and 318.15) K. From these experimental data, the excess molar volume, $V_m^E$ and isentropic compressibility, κ_s, have been determined. The behaviour of these values with temperature and concentration has been interpreted for clarifying the dispersion of ZnO nanoparticles in PEG and aqueous solution of PEG. The effects of ZnO nanoparticles and temperature have also been investigated on volumetric and transport properties of aqueous solutions of PEG. The $V_m^E$, was adequately fitted to the Redlich–Kister, Ott et al. and Singh et al. equations. The isentropic compressibility values were correlated with the polynomial equation. The Eyring-NRTL and Eyring-mNRF models have successfully been used for correlating the viscosity values of the nanofluids investigated with temperature dependency considered. The performance of the Einstein, Brinkman, Lundgren and Batchelor models in the prediction of viscosity values of the (ZnO + PEG) nanofluid has also been tested.     

Micellization behaviour and thermodynamic parameters of 12-2-12 gemini surfactant in (water + organic solvent) mixtures

The effect of organic solvents on micellization behaviour and thermodynamic parameters of a cationic gemini (dimeric) surfactant, C₁₂H₂₅(CH₃)₂N⁺–(CH₂)₂–N⁺(CH₃)₂C₁₂H₂₅·2Br^?, (12-2-12) was studied in aqueous solutions over the range of T = (293.15 to 323.15) K using the conductometric technique. Ethylene glycol (EG), dimethylsulfoxide (DMSO) and 1,4-dioxan (DO) were used as organic solvents with three different contents. The critical micelle concentration (cmc) and the degree of counter ion dissociation (α) of micelles in the water and in the (water + organic solvent) mixtures including 10%, 20%, and 30% solvent contents were determined. The standard Gibbs free energy $(\mathrm{\Delta }{G}_{\text{m}}^{°})$, enthalpy $(\mathrm{\Delta }{H}_{\text{m}}^{°})$ and entropy $(\mathrm{\Delta }{S}_{\text{m}}^{°})$ of micellization were estimated from the temperature dependence of the cmc values. It was observed that the critical micelle concentration of the gemini surfactant and the degree of counter ion dissociation of the micelle increased as the volume percentage of organic solvent, and temperature increased. The standard Gibbs free energy of micellization was found to be less negative with the increase in the organic solvent content and temperature.