Volumetric properties of ammonium nitrate in N,N-dimethylformamide

The densities of the ammonium nitrate in N,N-dimethylformamide (DMF) mixtures were measured at T = (308.15 to 348.15) K for different ammonium nitrate molalities in the range from (0 to 6.8404) mol·kg⁻¹. From the obtained density data, volumetric properties (apparent molar volumes and partial molar volumes) have been evaluated and discussed in the term of respective ionic and dipole interactions. From the apparent molar volume, determined at various temperatures, the apparent molar expansibility and the coefficients of thermal expansion were also calculated.     

Volumetric and compressibility behaviour of poly(propylene glycol) – Amino acid aqueous solutions at different temperatures

Precise density and sound velocity measurements have been carried out for aqueous solutions of PPG725 in the absence and presence of (0.2 and 0.5) mol · kg⁻¹ amino acids: alanine, glycine, serine and proline, and also for aqueous solutions of these amino acids in the absence and presence of 0.01 w/w PPG725 at T = (288.15, 293.15, 298.15, 303.15 and 308.15) K. From the experimental density and sound velocity values, the apparent molar volume and isentropic compressibility have been obtained and extrapolated to infinite dilution. The infinite dilution apparent molar properties for transfer of PPG from water to aqueous amino acids solutions and also those for transfer of amino acids from water to aqueous PPG solutions have been studied. Temperature dependency of the infinite dilution apparent molar volume was utilised to determine structure-breaker or structure-maker effects of the solutes. Hydration numbers of the amino acids in the investigated aqueous solutions have been evaluated from the volumetric and compressibility properties. All results are discussed based on the salting-out aptitude of the amino acids (hydrophilic + hydrophobic) interactions and (hydrophobic + hydrophobic) interactions occurred between PPG and the investigated amino acids.     

Excess molar enthalpies of the binary systems: (Dibutyl ether + isomers of pentanol) at T = (298.15 and 308.15) K

In this work, we present the experimental measurements of excess molar enthalpies for the binary systems of dibutyl ether with different isomers of pentanol: 1-pentanol, 2-pentanol, 3-pentanol, 3-methyl-2-butanol, 2-methyl-1-butanol, 3-methyl-1-butanol and 2-methyl-2-butanol; all of them at T = (298.15 and 308.15) K and atmospheric pressure. Our goal was to determine the influence of the OH-group position on the different isomers of pentanol in the excess molar enthalpies of the binary systems studied. For this purpose we have analysed their experimental effective-reduced dipole moments. All values of excess molar enthalpies for the mixtures studied are positive whereas the results obtained for the effective-reduced dipole moments of the isomers of pentanol are similar.     

Energetic characterisation of the system (water + 1-propoxypropan-2-ol) at T = 298.15 K

Given the importance that enthalpic and entropic contributions have in the interplay between thermodynamics and self-assembly of aqueous amphiphile systems, the energetic characterisation of the system {water + 1-propoxypropan-2-ol (1-pp-2-ol)} at T = 298.15 K was made by directly measuring excess partial molar enthalpies of 1-pp-2-ol and water, over the entire composition range, at T = 298.15 K and atmospheric pressure. Derivatives of the partial molar properties with respect to the composition are used to improve the understanding of molecular interactions in the water-rich region. The present results were compared with those for the well-studied system {water + 2-butoxyethanol (nC₄E₁)}, the two amphiphiles being structural isomers.     

(p, ρ, T) properties and apparent molar volumes Vϕ of CaCl2 in methanol at T = (298.15 to 398.15) K and pressure up to 40 MPa

The (p, ρ, T) properties and apparent molar volumes V_ϕ of CaCl₂ in methanol at T = (298.15 to 398.15) K, at pressures up to 40 MPa are reported, and apparent molar volumes have been evaluated. The experimental (p, ρ, T) values were described by an equation of state. The experiments were carried out at m = (0.10819, 0.28529, 0.65879 and 2.39344) mol · kg⁻¹ of calcium chloride.     

(Vapour + liquid) equilibria,volumetric and compressibility behaviour of binary and ternary aqueous solutions of 1-hexyl-3-methylimidazolium chloride,methyl potassium malonate,and ethyl potassium malonate

(Vapour + liquid) equilibrium data (water activity, vapour pressure, osmotic coefficient, and activity coefficient) of binary aqueous solutions of 1-hexyl-3-methylimidazolium chloride ([C₆mim][Cl]), methyl potassium malonate, and ethyl potassium malonate and ternary {[C₆mim][Cl] + methyl potassium malonate} and {[C₆mim][Cl] + ethyl potassium malonate} aqueous solutions were obtained through the isopiestic method at T = 298.15 K. These results reveal that the ionic liquid behaves as surfactant-like and aggregates in aqueous solutions at molality about 0.4 mol · kg⁻¹. The constant water activity lines of all the ternary systems investigated show small negative deviations from the linear isopiestic relation (Zdanovskii–Stokes–Robinson rule) derived using the semi-ideal hydration model. The density and speed of sound measurements were carried out on solutions of methyl potassium malonate and ethyl potassium malonate in water and of [C₆mim][Cl] in aqueous solutions of 0.25 mol · kg⁻¹ methyl potassium malonate and ethyl potassium malonate at T = (288.15 to 308.15) K at atmospheric pressure. From the experimental density and speed of sound data, the values of the apparent molar volume, apparent molar isentropic compressibility and excess molar volume were evaluated and from which the infinite dilution apparent molar volume and infinite dilution apparent molar isentropic compressibility were calculated at each temperature. Although, there are no clear differences between the values of the apparent molar volume of [C₆mim][Cl] in pure water and in methyl potassium malonate or ethyl potassium malonate aqueous solutions, however, the results show a positive transfer isentropic compressibility of [C₆mim][Cl] from pure water to the methyl potassium malonate or ethyl potassium malonate aqueous solutions. The results have been interpreted in terms of the solute–water and solute–solute interactions.     

Effect of temperature and ionic strength on volumetric and acoustic properties of solutions of urea alkyl derivatives in aqueous NaCl

The present work was undertaken to study volumetric and acoustic properties for diluted solutions of tetramethylurea in pure water and for urea, n-propylurea, n-butylurea and tetramethylurea in 0.5 or 1 mol · dm⁻³ aqueous solutions of sodium chloride. This paper presents measured values of densities and sound velocities at T = (288.15, 298.15 and 308.15) K. From these data the apparent molar volumes, V_Φ, adiabatic compressibilities, κ_S, and apparent molar adiabatic compressions, K_S,Φ, were obtained. The values of apparent molar volumes for infinite dilution and limited apparent adiabatic compressions were calculated from extrapolation of the concentration dependence. Further, the corresponding transfer data as well as hydration number of urea and its derivatives in the studied systems were estimated. The obtained parameters are discussed in terms of various solute-solvent and solute-cosolute interactions.     

Isothermal compressibility and internal pressure studies of some non-electrolytes in aqueous solutions at low temperatures

The experimental data of density (ρ) and sound velocity (u) in the temperature range (275.15 to 293.15) K have been obtained for the systems (dioxane + water), (dimethylformamide + water), (tetrahydrofuran + water), and (acetonitrile + water). The specific heat (C_p) data for the above systems have been obtained at T = 279.15 K. The data obtained are used to calculate the derived parameters of adiabatic compressibility (β_S), at T = 275.15 K to T = 283.15 K, isothermal compressibility (β_T), and internal pressure (P_i) at T = 279.15 K for different concentrations. The solute properties: apparent molar volume (ϕ_V), apparent molar expansivity (ϕ_E), and apparent molar compressibility (ϕ_KS) have been studied and the limiting values for these properties are reported. The variation in apparent molar properties with concentration and the corresponding temperature and pressure effects are discussed in terms of hydrophobic hydration (–H bonding interaction) and hydrophobic interaction (non-polar group solute–solute association in water). It is noted that the internal pressure of solutions is quite insensitive in the region of solute–solute association, while its variation with concentration in the dilute region is sensitive in contrast to the aqueous alcohol solutions. The molecular interactions also exhibit individualistic behaviour and are much dependent on structural alterations in water structure.     

Partial molar volume and isentropic compressibility of symmetrical and asymmetrical quaternary ammonium bromides in aqueous solution

Values of apparent molar volume and isentropic compressibility of symmetric and asymmetric isomers of tetrabutylammonium bromide, namely tetra-n-butylammonium bromide, tetra-iso-butylammonium bromide, tetra-sec-butylammonium bromide, di-n-butyl-di-iso-butylammonium bromide and di-n-butyl-di-sec-butylammonium bromide, in aqueous solution were determined from density and speed of sound measurements. These properties were obtained as a function of molal concentration within the range of 0.01 < m/mol · kg⁻¹ < 0.1 covering temperatures from 278.15 ⩽ T/K ⩽ 293.15. The partial molar volumes and the apparent isentropic molar compressibility at infinite dilution were calculated and their dependence on temperature examined. The results show that cations with sec-butyl chains have larger structural volumes compared to those with iso-butyl chains. In addition, cations with sec-butyl chains induce smaller structural changes in their hydration shell than the others.     

The dilution enthalpies of l-prolinol in N,N-dimethylformamide aqueous solutions at T = 298.15 K

Values of the enthalpy of dilution were measured for l-prolinol in pure water and N,N-dimethylformamide (DMF) aqueous solutions with various mass fractions of DMF at T = 298.15 K using a flow-mixing microcalorimeter. A pseudo phase equilibrium model was proposed to simplify the complex aggregation equilibrium and interpret the abnormality in the dilution enthalpy, which together with the McMillan–Mayer approach was used to fit the experimental data to obtain the enthalpic pairwise interaction coefficients and the molar aggregation enthalpies of l-prolinol in DMF aqueous solutions. The results are discussed in terms of the hydrophobic interaction and the interactions between the solvated solutes.     

Excess molar enthalpies of {diethyl oxalate + (methanol, + ethanol, + 1-propanol,and + 2-propanol)} at T = (288.2, 298.2, 313.2, and 328.2) K and p = 101.3 kPa

A flow-mixing isothermal microcalorimeter was used to measure excess molar enthalpies for four binary systems of {diethyl oxalate + (methanol, + ethanol, + 1-propanol, and + 2-propanol)} at T = (288.2, 298.2, 313.2, and 328.2) K and p = 101.3 kPa. The densities of the diethyl oxalate at different temperature were measured by using a vibrating-tube densimeter. All systems exhibit endothermic behaviour over the whole composition range, which means that the rupture of interactions is energetically the main effect. The excess molar enthalpies increase with temperature and the molecular size of the alcohols. The experimental results were correlated by using the Redlich–Kister equation and two local-composition models (NRTL and UNIQUAC).     

Volumetric properties of (water + hexamethylphosphoric triamide) from (288.15 to 308.15) K

Densities of (water + hexamethylphosphoric triamide) in the entire mole-fraction composition at five temperatures, from (288.15 to 308.15) K, and atmospheric pressure were measured by using a magnetic float densimeter with an error of ±1.1 · 10^?5 g · cm^?3. Excess molar volumes of the mixtures and apparent molar volumes of the components (down to their infinite dilution) were calculated. The volumetric effects of mixing being very large in magnitude present negative deviations from ideality and become decreasingly negative with increasing temperature. The apparent molar volume of organic co-solvent displays a clearly pronounced minimum in the water-rich region at all the temperatures studied. It has been shown that there is a thermodynamically substantiated interrelation between volume and enthalpy (heat capacity) properties of the mixtures considered.     

Thermodynamics of the ternary systems: (water + glycine,l-alanine and l-serine + di-ammonium hydrogen citrate) from volumetric,compressibility, and (vapour + liquid) equilibria measurements

The apparent molar volumes and isentropic compressibility of glycine, l-alanine and l-serine in water and in aqueous solutions of (0.500 and 1.00) mol · kg^?1 di-ammonium hydrogen citrate {(NH₄)₂HCit} and those of (NH₄)₂HCit in water have been obtained over the (288.15 to 313.15) K temperature range at 5 K intervals at atmospheric pressure from measurements of density and ultrasonic velocity. The apparent molar volume and isentropic compressibility values at infinite dilution of the investigated amino acids have been obtained and their variations with temperature and their transfer properties from water to aqueous solutions of (NH₄)₂HCit have also been obtained. The results have been interpreted in terms of the hydration of the amino acids. In the second part of this work, water activity measurements by the isopiestic method have been carried out on the aqueous solutions of {glycine + (NH₄)₂HCit}, {alanine + (NH₄)₂HCit}, and {serine + (NH₄)₂HCit} at T = 298.15 K at atmospheric pressure. From these measurements, values of vapour pressure, osmotic coefficient, activity coefficient and Gibbs free energy were obtained. The effect of the type of amino acids on the (vapour + liquid) equilibrium of the systems investigated has been studied. The experimental water activities have been correlated successfully with the segment-based local composition Wilson model. Furthermore, the thermodynamic behaviour of the ternary solutions investigated has been studied by using the semi-ideal hydration model and the linear concentration relations have been tested by comparing with the isopiestic measurements for the studied systems at T = 298.15 K.     

Thermodynamic properties of (tetradecane + benzene, + toluene, + chlorobenzene, + bromobenzene, + anisole) binary mixtures at T = (298.15, 303.15, and 308.15) K

Density ρ, viscosity η, and refractive index n_D, values for (tetradecane + benzene, + toluene, + chlorobenzene, + bromobenzene, + anisole) binary mixtures over the entire range of mole fraction have been measured at temperatures (298.15, 303.15, and 308.15) K at atmospheric pressure. The speed of sound u has been measured at T = 298.15 K only. Using these data, excess molar volume V^E, deviations in viscosity Δη, Lorentz–Lorenz molar refraction ΔR, speed of sound Δu, and isentropic compressibility Δk_s have been calculated. These results have been fitted to the Redlich and Kister polynomial equation to estimate the binary interaction parameters and standard deviations. Excess molar volumes have exhibited both positive and negative trends in many mixtures, depending upon the nature of the second component of the mixture. For the (tetradecane + chlorobenzene) binary mixture, an incipient inversion has been observed. Calculated thermodynamic quantities have been discussed in terms of intermolecular interactions between mixing components.     

Osmotic and apparent molar properties of binary mixtures alcohol + 1-butyl-3-methylimidazolium trifluoromethanesulfonate ionic liquid

In this work, physical properties (densities and speeds of sound) for the binary systems {1-propanol, or 2-propanol, or 1-butanol, or 2-butanol, or 1-pentanol + 1-butyl-3-methylimidazolium trifluoromethanesulfonate} were experimentally measured from T = (293.15 to 323.15) K and at atmospheric pressure. These data were used to calculate the apparent molar volume and apparent molar isentropic compression which were fitted to a Redlich–Meyer type equation. This fit was used to obtain the corresponding apparent molar properties at infinite dilution. On the other hand, the osmotic and activity coefficients and vapor pressures of these binary mixtures were also determined at T = 323.15 K using the vapor pressure osmometry technique. The Extended Pitzer model of Archer was employed to correlate the experimental osmotic coefficients. From the parameters obtained in the correlation, the mean molal activity coefficients and the excess Gibbs free energy for the studied mixtures were calculated.     

Densities of {poly(ethylene glycol) + water} over the temperature range (283.15 to 363.15) K

Densities of {poly(ethylene glycol) [PEG] + water} prepared with PEG average molar mass (200, 400, 600, and 1500) g · mol^?1 have been measured over the entire composition range over the temperature range (283.15 to 363.15) K at 10 K intervals using a density meter based on electromagnetically-induced oscillations of a U-shaped glass tube and an inbuilt Peltier thermostat. The density versus temperature data of (PEG + water) at each composition for all PEGs were fit to a simple quadratic equation: ρ/(g · cm^?3) = ρ₀/(g · cm^?3) + a(T/K) + b(T/K)². Fits were observed to be satisfactory at each composition for all four (PEG + water). The excess molar volumes of (PEG + water) are observed to be negative and significant over the entire composition range for all four (PEG + water). Irrespective of the temperature, the maximum absolute excess molar volumes are observed in the water-rich region of the mixture and are found to decrease with increasing temperature. This is attributed to the presence of strong interactions within the (PEG + water). Specifically, it is proposed to be due to the H-bonding interactions between the PEG and the water molecules within the mixtures.     

Densities and volume properties of (water + tert-butanol) over the temperature range of (274.15 to 348.15) K at pressure of 0.1 MPa

The densities of {water (1) + tert-butanol (2)} binary mixture were measured over the temperature range (274.15 to 348.15) K at atmospheric pressure using “Anton Paar” digital vibrating-tube densimeter. Density measurements were carried out over the whole concentration range at (308.15 to 348.15) K. The following volume parameters were calculated: excess molar volumes and thermal isobaric expansivities of the mixture, partial molar volumes and partial molar thermal isobaric expansivities of the components. Concentration dependences of excess molar volumes were fitted with Redlich–Kister equation. The results of partial molar volume calculations using four equations were compared. It was established that for low alcohol concentrations at T ? 208 K the inflection points at x₂ ≈ 0.02 were observed at concentration dependences of specific volume. The concentration dependences of partial molar volumes of both water and tert-butanol had extremes at low alcohol content. The temperature dependence of partial molar volumes of water had some inversion at х₂ ≈ 0.65. The temperature dependence of partial molar volumes of tert-butanol at infinite dilution had minimum at ≈288 K. It was discovered that concentration dependences of thermal isobaric expansivities of the mixture at small alcohol content and low temperatures passed through minimum.     

Isentropic compressibilities of (amide + water) mixtures: A comparative study

The density and ultrasonic velocity of aqueous solutions of formamide (FA), N-methylformamide (NMF), N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMA), pyrrolidin-2-one (PYR), N-methyl-2-pyrrolidinone (NMP), and their pure phases have been measured at 298.15 K and atmospheric pressure. Densities and ultrasonic velocities in pure amides have been also measured at the temperature range 288.15 K to 308.15 K for the computation of their thermal expansivities. Isentropic compressibility, intermolecular free length, relative association, apparent molar compressibility, as well as the excess quantities, ultrasonic velocity, isentropic compressibility, intermolecular free length, have been evaluated and fitted to the Redlich–Kister type equation. The deviation from ideal mixing law in ultrasonic velocity is positive while the deviations in isentropic compressibility and intermolecular free length are negative for all (amide + water) mixtures. This behavior reveals the nature and the magnitude of intermolecular interactions between the amide–water molecules. The sequence of superimposed curves of various ultrasonic parameters vs. the amide mole fraction is related to the strength of interactions between the unlike molecules and the role of –CH₃ substitution in amides. The comparison of ultrasonic to volumetric properties reveals differences on the position of the extrema and their relation with the degree of substitution while the interpretation of these differences is discussed. Two different approaches on the computation of excess functions, applied in this work, brought out a difference in the magnitude of deviations and a partial reversion to the sequence of amides curves suggesting a different estimation in terms of deviations from ideal mixing law and therefore of the relative molecular interactions.     

Standard molar volumes and heat capacities of aqueous solutions of sodium trifluoromethanesulfonate at temperatures up to 573 K and pressures to 28 MPa

Densities and heat capacities of aqueous solutions of sodium trifluoromethanesulfonate (sodium triflate) of concentrations from 0.025 to 0.3 mol · kg⁻¹ were measured with high temperature, high pressure custom-made instruments at temperatures up to 573 K and at pressures up to 28 MPa. Standard molar volumes and standard molar heat capacities were obtained via extrapolation of the apparent molar properties to infinite dilution. The results for volumetric properties are consistent with earlier literature data, but no previous measurements exist for heat capacities of sodium triflate at superambient conditions. The new data were used for calculating the standard molar volumes and heat capacities for the triflate anion and compared with the results for triflic acid that should be essentially identical within the expected error margins. At temperatures above 473 K an effort was made to refine the processing of literature data for HCl(aq), taking into account its partial association, and subsequently to modify the value for Na⁺ ion calculated from the standard thermodynamic values of NaCl(aq) where its ion pairing was already considered. This approach yields reasonable agreement at high temperatures between the values for triflate ion calculated from its salt and those for triflic acid.     

Volumetric properties of (an organic compound + di-n-butyl ether) atT = 298.15 K

Excess molar volumes V_m^Eof {di- n -butyl ether (DBE)  +  a monofunctional organic compound} have been determined atT =  298.15 K over the whole composition range by means of a vibrating-tube densimeter. TheV_m^E values were either positive (propylamine, or butylamine, or acetone, or tetrahydrofuran  +  DBE) or negative (methanol, or butanol, or diethyl ether, or cyclopentanone, or acetonitrile  +  DBE). Markedly asymmetric V_m^Ecurves were displayed by (DBE  +  methanol) and (DBE  +  acetonitrile). Partial molar volumes __ V_m^oat infinite dilution in DBE, both from this work and the literature, were analysed in terms of an additivity scheme, and the group contributions thus obtained were discussed and compared with analogous results in water. DBE revealed a greater capability of distinguishing between polar and non-polar solutes, as well as in discriminating differently shaped molecules (unbranched, branched, cyclic). The limiting slopes of apparent excess molar volumes are evaluated and briefly discussed in terms of solute–solute and solute–solvent interactions.