(Liquid + liquid) equilibria for (water + 1-propanol or acetone + β-citronellol) at different temperatures

On this paper, experimental (liquid + liquid) equilibrium (LLE) results are presented for systems composed of β-citronellol and aqueous 1-propanol or acetone. To evaluate the phase separation properties of β-citronellol in aqueous mixtures, LLE values for the ternary systems (water + 1-propanol + β-citronellol) and (water + acetone + β-citronellol) were determined with a tie-line method at T = (283.15, 298.15, and 313.15 ± 0.02) K and atmospheric pressure. The reliability of the experimental tie-lines was verified by the Hand and Bachman equations. Ternary phase diagrams, distribution ratios of 1-propanol and acetone in the mixtures are shown. The effect of the temperature on the ternary (liquid + liquid) equilibria was examined and discussed. The experimental LLE values were satisfactorily correlated by extended UNIQUAC and modified UNIQUAC models.     

Modelling (vapour + liquid) and (vapour + liquid + liquid) equilibria of {water (H2O) + methanol (MeOH) + dimethyl ether (DME) + carbon dioxide (CO2)} quaternary system using the Peng–Robinson EoS with Wong–Sandler mixing rule

The (vapour + liquid) equilibria (VLE) and (vapour + liquid + liquid) equilibria (VLLE) binary data from literature were correlated using the Peng–Robinson (PR) equation of state (EoS) with the Wong–Sandler mixing rule (WS). Two group contribution activity models were used in the PRWS: UNIFAC–PSRK and UNIFAC–Lby. The systems were successfully extrapolated from the binary systems to ternary and quaternary systems. Results indicate that the PRWS–UNIFAC–PSRK generally displays a better performance than the PRWS–UNIFAC–Lby.     

(Vapour + liquid) equilibria for the binary mixtures (cis-pinane + α-pinene) and (cis-pinane + 1-butanol)

The isothermal and isobaric (vapour + liquid) equilibria for (cis-pinane + α-pinene) and (cis-pinane + 1-butanol) measured with an inclined ebulliometer are presented. The experimental results are analysed using the UNIQUAC equation with the temperature-dependence binary parameters with satisfactory results. Experimental vapour pressures of cis-pinane are also included.     

(Ternary liquid + liquid) equilibria for (water + acetone + α-pinene,or β-pinene,or limonene) mixtures

(Ternary liquid + liquid) equilibria (tie-lines) of (water + acetone + α-pinene) at T = (288.15, 298.15, and 308.15) K and (water + acetone + β-pinene, or limonene) at T = 298.15 K have been measured. The experimental (ternary liquid + liquid) equilibrium data have been correlated successfully by the original UNIQUAC and modified UNIQUAC models. The modified UNIQUAC model reproduced accurately the experimental results for the (water + acetone + α-pinene) system at all the temperatures but fairly agreed with the experimental data for the (water + acetone + β-pinene, or limonene) systems.     

Ternary (liquid + liquid) equilibria for (water + 2-propanol + α-pinene,or β-pinene) mixtures at four temperatures

Ternary (liquid + liquid) equilibria date for the (water + 2-propanol + α-pinene, or β-pinene) systems were measured at T = (293.15, 298.15, 303.15, and 308.15) K under atmospheric pressure. The experimental results were correlated using the extended and modified UNIQUAC models. The calculated results obtained from the modified UNIQUAC model successfully represent the experimental tie-line data. The temperature influence on liquid-phase equilibria was studied.     

A thermodynamic study on solubility and liquid−liquid phase behaviour for 2,2,2-trifluoroethanol + cyclohexane + 1-butanol at three temperatures and pressure 101.3 kPa

This study demonstrates the course of solubility and (liquid + liquid) equilibrium (LLE) for the system (cyclohexane + 1-butanol + 2,2,2-trifluoroethanol) at temperatures of (288.15, 298.15, and 308.15) K and pressure 101.3 kPa. The titration method was used to assess solubility (binodal) curves, while a direct analytical method to acquire tie lines.The consistency of the binodal curves and phase diagrams data were well calculated by Hand and Othmer–Tobias empirical equations. The NRTL and UNIQUAC thermodynamic models gave accurate tie-line values for the systems. Plait-point, distribution coefficient, solvent selectivity, and NRTL and UNIQUAC binary interaction parameters were obtained.The immiscibility region of the system decreases significantly with increasing temperature. The results present an overview of the high efficiency of liquid extraction using 2,2,2-trifluoroethanol as solvent to yield pure cyclohexane from its 1-butanol azeotrope mixture at ambient temperatures.     

Thermodynamics of the oxidation–reduction reaction {2 glutathionered(aq) + NADPox(aq)=glutathioneox(aq) + NADPred(aq)}

Microcalorimetry, spectrophotometry, and high-performance liquid chromatography (h.p.l.c.) have been used to conduct a thermodynamic investigation of the glutathione reductase catalyzed reaction {2 glutathione_red(aq) + NADP_ox(aq)=glutathione_ox(aq) + NADP_red(aq)}. The reaction involves the breaking of a disulfide bond and is of particular importance because of the role glutathione_red plays in the repair of enzymes. The measured values of the apparent equilibrium constant K^′ for this reaction ranged from 0.5 to 69 and were measured over a range of temperature (288.15 K to 303.15 K), pH (6.58 to 8.68), and ionic strength I_m (0.091 mol · kg⁻¹ to 0.90 mol · kg⁻¹). The results of the equilibrium and calorimetric measurements were analyzed in terms of a chemical equilibrium model that accounts for the multiplicity of ionic states of the reactants and products. These calculations led to values of thermodynamic quantities at T=298.15 K and I_m=0 for a chemical reference reaction that involves specific ionic forms. Thus, for the reaction {2 glutathione_red⁻(aq) + NADP_ox³⁻(aq)=glutathione_ox²⁻(aq) + NADP_red⁴⁻(aq) + H⁺(aq)}, the equilibrium constant K=(6.5±4.4)·10⁻¹¹, the standard molar enthalpy of reaction Δ_rH^o_m=(6.9±3.0) kJ · mol⁻¹, the standard molar Gibbs free energy change Δ_rG^o_m=(58.1±1.7) kJ · mol⁻¹, and the standard molar entropy change Δ_rS^o_m=−(172±12) J · K⁻¹ · mol⁻¹. Under approximately physiological conditions (T=311.15 K, pH=7.0, and I_m=0.25 mol · kg⁻¹ the apparent equilibrium constant K^′≈0.013. The results of the several studies of this reaction from the literature have also been examined and analyzed using the chemical equilibrium model. It was found that much of the literature is in agreement with the results of this study. Use of our results together with a value from the literature for the standard electromotive force E^o for the NADP redox reaction leads to E^o=0.166 V (T=298.15 K and I=0) for the glutathione redox reaction {glutathione_ox²⁻(aq) + 2 H⁺(aq) + 2 e⁻=2 glutathione_red⁻(aq)}. The thermodynamic results obtained in this study also permit the calculation of the standard apparent electromotive force E^′o for the biochemical redox reaction {glutathione_ox(aq) + 2 e⁻=2 glutathione_red(aq)} over a wide range of temperature, pH, and ionic strength. At T=298.15 K, I=0.25 mol · kg⁻¹, and pH=7.0, the calculated value of E^′o is −0.265 V.     

(Solid + liquid) equilibria for the ternary system (CsBr + LnBr3 + H2O) (Ln = Pr,Nd, Sm) at T = 298.2 K and atmospheric pressure,thermal and fluorescent properties of Cs2LnBr5·10H2O

The (solid + liquid) phase equilibria of the ternary systems (CsBr + LnBr₃ + H₂O) (Ln = Pr, Nd, Sm) at T = 298.2 K were studied by the isothermal solubility method. The solid phases formed in the systems were determined by the Schreinemakers wet residues technique, and the corresponding phase diagrams were constructed based on the measured data. Each of the phase diagrams, with two invariant points, three univariant curves, and three crystallization regions corresponding to CsBr, Cs₂LnBr₅·10H₂O and LnBr₃·nH₂O (n = 6, 7), respectively, belongs to the same category. The new solid phase compounds Cs₂LnBr₅·10H₂O are incongruently soluble in water, and they were characterized by chemical analysis, XRD and TG-DTG techniques. The standard molar enthalpies of solution of Cs₂PrBr₅·10H₂O, Cs₂NdBr₅·10H₂O and Cs₂SmBr₅·10H₂O in water were measured to be (52.49 ± 0.48) kJ · mol⁻¹, (49.64 ± 0.49) kJ · mol⁻¹ and (50.17 ± 0.48) kJ · mol⁻¹ by microcalorimetry under the condition of infinite dilution, respectively, and their standard molar enthalpies of formation were determined as being −(4739.7 ± 1.4) kJ · mol⁻¹, −(4728.4 ± 1.4) kJ · mol⁻¹ and −(4724.4 ± 1.4) kJ · mol⁻¹, respectively. The fluorescence excitation and emission spectra of Cs₂PrBr₅·10H₂O, Cs₂NdBr₅·10H₂O and Cs₂SmBr₅·10H₂O were measured. The results show that the upconversion spectra of the three new solid phase compounds all exhibit a peak at 524 nm when excited at 785 nm.     

The liquid–liquid coexistence curves of {benzonitrile + n-pentadecane} and {benzonitrile + n-heptadecane} in the critical region

Liquid + liquid coexistence curves for the binary solutions of {benzonitrile + n-pentadecane} and {benzonitrile + n-heptadecane} have been measured in the critical region. The critical exponent β and the critical amplitudes have been deduced and the former is consistent with the theoretic prediction. It was found that the coexistence curves may be well described by the crossover model proposed by Gutkowski et al. The asymmetries of the diameters of the coexistence curves were also discussed in the frame of the complete scaling theory.     

Thermodynamics of the O2/O2− redox couple in molten (LiCl + KCl + Li2O) systems

Activity coefficients of oxide ion were determined by the measurements of the standard formal potential of O₂/O^2? with a boron-doped diamond (BDD) electrode in molten (LiCl + KCl): LiCl:KCl = {58.5:41.5 (eutectic), 65:35, 70:30, 75:25} mol% at T = (673 to 803) K. The activity coefficient decreases with the increase of the LiCl content in the melt: (18.7 ± 1.5, 7.7 ± 1.0, 4.1 ± 0.4, and 1.6 ± 0.1), respectively, at T = 773 K in each melt. The result is explained by the attractive force between Li⁺ and O^2? which is stronger than that between K⁺ and O^2?.     

Ternary mutual diffusion coefficients of aqueous {l-dopa (1) + β-CD (2)} solutions at T = 298.15 K

Ternary mutual diffusion coefficients (D₁₁, D₂₂, D₁₂ and D₂₁) measured by the Taylor dispersion method are reported for aqueous solutions of {levodopa (l-dopa) + β-cyclodextrin (β-CD)} solutions at T = 298.15 K and concentrations up to 0.007 mol · dm⁻³. Significant effects on the diffusion were observed, suggesting interactions between this carbohydrate and l-dopa. Support for this came from ¹H NMR spectroscopy, which shows that these effects are due to formation of 1:1 (β-CD:l-dopa) complexes.     

Volumetric behaviour of the (2,2,4-trimethylpentane + methylbenzene + butan-1-ol) ternary system and its binary sub-systems within the temperature range (298.15–328.15) K

Densities and speeds of sound of the (2,2,4-trimethylpentane + methylbenzene + butan-1-ol) ternary system as well as all its binary sub-systems were measured at four temperatures, namely 298.15 K, 308.15 K, 318.15 K, and 328.15 K at atmospheric pressure by a vibrating-tube densimeter DSA 5000. The binary (isooctane + toluene) system was studied previously. Excess quantities (molar volume, adiabatic compressibility, and isobaric thermal expansivity) of the mixtures studied were calculated from the experimental densities and speed of sounds. The excess molar volume data were correlated using the Redlich–Kister equation. Both the positive and S-shaped excess molar volume curves were found for the systems studied. The excess molar volumes versus concentration of binary systems differed in the shape and temperature dependence. The experimental binary data were compared with literature data. The experimental excess molar volumes were analyzed by means of the Extended Real Associated Solution (ERAS) model. The experimental data and the ERAS model can help to estimate real behaviour of the systems studied.     

Measurements of the critical parameters for {xNH3 + (1 − x)H2O} with x = (0.9098, 0.7757, 0.6808)

Measurements of the critical parameters for {xNH₃ + (1 ? x)H₂O} with x = (0.9098, 0.7757, 0.6808) were carried out by using a metal-bellows variable volumometer with an optical cell. The expanded uncertainties (k = 2) in temperature, pressure, density, and composition measurements have been estimated to be less than 3.2 mK, 3.2 kPa, 0.3 kg · m^?3, and 8.8 · 10^?4, respectively. In each mole fraction, the critical temperature T_c was first determined on the basis of the intensity of the critical opalescence. The critical pressure p_c and critical density ρ_c were then determined as the point at which the meniscus disappears on the isotherm at T = T_c. The expanded uncertainties (k = 2) in the present critical parameters have also been estimated. Comparisons of the present values with the literature data as well as the calculated values afforded using the equation of state are also presented.     

Solubilities,densities and refractive indices for the ternary systems ethylene glycol + MCl + H2O (M = Na,K, Rb,Cs) at (15 and 35) °C

The solubilities, densities and refractive indices data for the four ternary systems ethylene glycol + MCl + H₂O (M = Na, K, Rb, Cs) at different temperatures were measured, with mass fractions of ethylene glycol in the range of 0 to 1.0. In all cases, the presence of ethylene glycol significantly reduces the solubility of the salts in aqueous solution. The experimental data of density, refractive index and solubility of saturated solutions for these systems were correlated using polynomial equations as a function of the mass fraction of ethylene glycol. On the other hand, the refractive index and density of unsaturated solutions was also determined for the four ternary systems with varied unsaturated salt concentrations. Values for both the properties were correlated with the salt concentrations and proportions of ethylene glycol in the solutions.     

Interactions in (l-phenylalanine/l-histidine + 0.01 mol · kg−1 aqueous β-cyclodextrin) systems at T = (293.15, 298.15, 303.15 and 308.15) K

Densities (ρ) and speeds of sound (u) have been measured for (l-phenylalanine + 0.01 mol · kg⁻¹ aqueous β-cyclodextrin) and (l-histidine + 0.01 mol · kg⁻¹ aqueous β-cyclodextrin) systems at T = (293.15, 298.15, 303.15 and 308.15) K using the density and sound velocity Meter DSA 5000 M. The ρ and u values have been utilized to evaluate values of the partial molar volume (${\varphi }_v^{\circ }$), transfer partial molar volume (${\mathrm{\Delta }}_{\text{tr}}{\varphi }_v^{\circ }$), partial molar isentropic compressibility (${\varphi }_k^{\circ }$), and transfer partial molar isentropic compressibility (${\mathrm{\Delta }}_{\text{tr}}{\varphi }_k^{\circ }$) of the systems studied. The experimentally measured and calculated parameters have been interpreted in terms of host-guest and ion-hydrophilic interactions operative in the systems.